Can video cards for the new Mac Pro be installed in the field?

Current Configuration of the new Mac Pro is as follows:
      ACES MacPro Workstation Seat
Processor
6-Core/3.5GHz/Xeon E5
Memory
32 GB
Graphics
2X AMD FirePro D500
Hard Disk
1 TB
Display
24" LED / HP
Media Player
2GB FIPS USB Drive
Mouse
Apple Magic Mouse
Keyboard
USB
Ports
4-USB 3.0;
6-Thunderbolt
1- HDMI
Netwk Interface
Ethernet/802.11n
Card Reader
NIST SP 800 Compliant
My question is can the Graphic Display cards be removed and replaced in the field by an experience Mac Technician?
Any special tools required?

Now here is the back, showing the heatsink paste still in place, and the thermal pads used to cool the RAM chips to the central cooler:
note that the two cards are not interchangeable -- they have their power lugs on opposite sides. One card has chips to support actual display output to the thunderbolt Busses, the other card has none, but has the custom micro-PCIE slot for the PCIe SSD "stick".
One reason for this design is that to make a leap forward, you would have to water-cool the slots for a traditional form-factor PCIe slot Mac pro. Then do it again to include a second GPU. In my opinion, this model Mac Pro is about conquering the cooling problem of this much CPU and GPU compute-power in one box.
NVIDIA graphics card replacements? maybe eventually, but not at this writing.

Similar Messages

  • Best Video card for Mid 2010 Mac Pro

    I'm currently running a Mid 2010 Mac Pro with a 5870 video card in it. I feel that it's bottlenecking processes, and want to upgrade it. I'm not looking to upgrade the computer itself, but want to get the fastest video card that I can.
    Looking for suggestions, and links if possible to what you know works.
    Thanks!

    Why do you a) need a "fast" video card, and b) think it is the bottleneck (it might)?
    Maybe you need dual AMD's and a 2nd 5870 (with the addition of 2nd 450W PSU to drive it).
    This: July 25th, 2014 -- GeForce GTX 780 6G: Mac Pro Tower 'Sweet Spot'?
    Do you have some SSDs for system and scratch? that often is where you can attack a bottleneck and improve performance.
    Graphics can need as much RAM as possible. Dual or single cpu? many are choosing to install one or two faster cpus of the 3.4GHz variety to help.

  • Video card for 1st generation Mac Pro

    My X1900 card in the Mac Pro 1st generation has died. I've searched the board and the replacement cards seem to be older and not sold any more. Does anyone know what will work? I went to an Apple Store today and the "genius" said I needed a new X1900. I told him I didn't think they were made any more. I did a Web search and it seems Apple has known about this problem and was replacing them up to January 2011. Wish I was contacted about this by Apple; they have records that I purchased the card. I've had problems with this for quite some time. I thought upgrading to Snow Leopard would help but I seemed to get more crashes after the upgrade.

    If this image attached is what you have that died you can have this to bolt on to your original graphics card, it should work just fine as a GPU replacement. It worked fine for me, it's just that the X1900 for me when I used the 1st gen Mac Pro didn't suit my needs.
    I've never wanted to throw it away. The board and copper cooling system it was attached to was too cumbersome.
    Let me know and I'll ship it to you.

  • IMac vs the new Mac Pro for video editing in FCPX?

    Hi.
    I am currently using a macbook air for all my editing and rendering of videos in FCPX. The editing process is reasonably smooth when dealing with shorter clips, but when I tried to edit multicam clips, things started to slow down. Also,  the rendering and compression processes are tedious. I am planning to edit and process a much larger number of videos in the next years to come, so I have decided to do a serious upgrade of my system.
    For the moment, I am torn between a maxed out iMac 27", which would be the cheapest alternative, and the 6 core Mac Pro or 4 core Mac Pro.
    When I look at benchmarks of the new Mac Pro's in Geekbench, the iMac is never very far away in terms of performance.  Does tests like this tell anything about how well the Mac Pro will perform in FCP?   Does the hardware in the Mac Pro have features which makes it superior to the iMac, in other ways than for example the "pure power" of the CPU and GPU?
    Christopher.

    FCP X 10.1, Motion 5.1 Updates w/Dual GPU Support (new Mac Pros) (from Thursday)
    Apple released Final Cut Pro X 10.1 Thursday with support for Dual GPUs in the new Mac Pro and more.
    Long list in the Final Cut Pro X 10.1 Release Notes that also links to info on How to back up important FCP X 10.0.x files before updating. (Today's Apple docs listing also has more related to Final Cut Pro X 10.1.)
    Also out today are Compressor 4.1 and Motion 5.1. Full release notes below but here's a clip from the App store Motion 5.1 changes:
    Optimized playback and rendering using dual GPUs in the new Mac Pro
    FxPlug 3 with custom plug-in interfaces and dual-GPU support
    Faster project loading, especially for complex projects
    Share directly to YouTube at 4K resolution
    Spanish language localization
    Dual FirePro Dxxx Rendering FCP-X
    http://www.barefeats.com/tube05.html
    Intel Xeon processors are designed to run 24/7 and stay cool and under load.
    Mac Pro so far hold up strongly for years, easy to add and upgrade RAM and processor, and maybe, hopefully, even the twin GPUs. Thunderbolt2 for all your projects and storage as well.
    6 or 8-cores is going to walk away from iMac which is breathing hard and not designed for constant heat. Haswell was designed to conserve and reduce.

  • Suggestion for Apple: MacBooks as terminals for the new Mac Pro

    Suggesting Apple to enable using MacBooks as terminals for the new Mac Pro if connecting through the thunderbolt.
    I am planning to get a new Mac Pro this month and use it as a 'portable' workstation since it weighs only 5kg.
    I am working on scienctific research which requires travels quite often.
    I want to have a workstation with me when I'm off-site so that I can work without worrying about the network connection.
    It would be great if I can use Macbook Air as a display, keyboard and touchpad for the Mac Pro.
    I will be fully geared by taking a Mac Pro and a MacBook Air with me where ever I travel.

    I don't know much about Thunderbold connections.
    Especially how does it combine PICe and DisplayPort signal together.
    I would like the MacBook serve as an external screen and an external PCIe video card to the Mac Pro, together with its touchpad and keyboard connected to the Mac Pro as an external USB keyboard and touchpad.
    In this case, one may not even boot into the OS on the MacBook side, just need proper drivers in the Mac Pro side for the 'external PCIe video card', keyboard and touchpad.

  • HT204347 is there an audio card that comes standard with the new Mac Pro?

    Is there an audio card that comes standard with the new Mac Pro?

    Hi cvs904,
    If you are interested in more information about the built-in audio ports on the new Mac Pro, you may find the following article helpful:
    Mac Pro (Late 2013): Audio ports
    http://support.apple.com/kb/HT6024
    Regards,
    - Brenden

  • AMD Crossfire, Boot Camp, and the new Mac Pro Issue

    Hello, all.
    I have a new Mac Pro (Late 2013) with 6 cores, 32 GB RAM, and dual D700 AMD graphics cards.  I'm using an older 30 inch Apple Cinema Display (with the dual link DVI adapter).  I've successfully installed Windows 8.1 under Boot Camp.  Here's my problem...
    I understand that for the new Mac Pro under Boot Camp enables AMD CrossfireX by default from multiple sources online.  However, it's disabled on mine, and every time I try to enable it (and hit "Apply" in the AMD Control Center), it disables again.
    Is Crossfire only available for use with a Thunderbolt Display attached?  Could that be the problem?  Or is the AMD Control Panel lying to me?
    Now, games in Windows are still running well... But I'd like to take full advantage of the dual graphics cards in the new Mac Pro with Crossfire.  Any help is greatly appreciated, thanks!

    Fixed it!
    So, not only would Crossfire not enable under Windows 8.1 on my Mac Pro in Boot Camp... But Windows started crashing massively.  I was about to wipe Boot Camp entirely and try a clean install (even though the only three things I'd installed were Windows itself using Apple's exact instructions, Steam, and Skyrim), but decided in a last ditch effort to try disconnecting and reconnecting peripherals.
    Turns out the culprit was my Belkin Thunderbolt Express Dock.
    Disconnecting the Belkin Thunderbolt dock not only stopped Windows from crashing, but now I can enable Crossfire, as well!
    Now, this is especially strange since I have read elsewhere that people have no problems using the Belkin dock under Boot Camp with other Macs... This issue is probably isolated to using it in Boot Camp with the new Mac Pro.  But disconnecting the dock from my Mac Pro has solved not just one but all of my Boot Camp issues.  (Of course, using the Belkin dock under OSX on my Mac Pro is no problem.)
    Long story short, if you have a new Mac Pro and plan on using Windows 8.1 under Boot Camp, don't have the Belkin Thunderbolt Express Dock attached.
    I'm going to contact Belkin and tell them what I've discovered.
    Hope that helps y'all.

  • The new Mac Pro (6,1) and TRIM

    With its economical internal design and limited internal expansion options, the new Mac Pro depends heavily on the speed and flexibility of Thunderbolt 2 for expansion. In the old days, we could add four HDs in the internal bays and one more under the optical drive. This also allowed us, if we used SSDs instead of HDs, to enable TRIM for other than Apple drives.
    We know that TRIM doesn't work with a USB 3.0 connection. The question is, can TRIM be enabled on an SSD connected in some fashion through Thunderbolt? I know that graphics cards can be plugged into an external PCIe expansion chassis and that eSATA SSDs, such as the OWC Mercury Accelsior_E2, can plug in too. But does having to pass through the Thunderbolt interface interfer with or prevent TRIM support? For that matter, what kind of external connection to an SSD at the other end of the Thunderbolt cable would be able to support TRIM? I'm currently using a CalDigit PCIe card which provides two eSATA external connections, and when a NewerTech Voyager Q is connected and an SSD plugged into it (like putting bread in a toaster), the drive is seen as "Rotational" in System Information, and TRIM cannot be enabled.
    Since TRIM support is important for continued performance and longer life of SSDs, is this an issue with the new Mac Pro's design philosophy?

    Hopeful but not comforting.
    With Mavericks, not all SSDs will report TRIM support, but doing a benchmark both before and after the change should confirm that TRIM is functional.
    I should see TRIM = YES and not from some benchmark.
    Thunderbolt support for TRIM is good. But Intel has as yet? never supported TRIM on an array, so not sure how that is accomplished.
    "Is" or "may" and "could" - I just  wouldn't make a "TRIM is supported by 10.8.5 and later" as it may vary by Macs that had native SATA III with PCIe support, the new Samsung controller Apple has been using. Certainly not in 5,1 Mac Pro except if and only for an Apple SSD BTO upgrade.

  • How to use hard drives with the new mac pro

    A few quick questions about upgrading to new Mac pro desktop
    I currently have 4 internal hard drives for a total of 8T
    What will the solution be to add storage to the new desktop?
    I assume it will be thunderbolt options?
    Lets say I wanted at least 8TB of storage to add to the computer
    and attached the storage via thunderbolt will it be as fast data throughput
    as the harddrives in my current computer hooked up to the external bus?
    I also have a pci card running my audio plugins for Universal Audio how will those pci
    cards work on the new mac pro?

    Also will the transfer rate with the pegas be as fast as if the drives were connected to the bus in the machines like the old mac pro?
    To answer that, think of this as a Bottleneck problem. The overall performance is as slow as the slowest device.
    At this writing typical rotating drives can produce a momentary burst at 125 MBytes/sec or 1,000 Mbits/sec. Only FireWire 800 is starting to be a limit for that -- EVERYTHING else is faster. Thunderbolt-1 is 10,000 Mbits/sec -- ten times faster.
    The best SSD can produce a burst at maybe 800 MBytes/sec or 6,400 Mbits/sec. There is not a big speed difference in an SSD RAID, because the latency is already low. But the 10,000 Mbits/sec of ThunderBolt-1 is still plenty fast enough for that as well.
    If ThunderBolt-2 devices really can run a single data stream at 20,000 Mbits/sec, that does not make ANYTHING faster -- it just moves the ceiling (potential bottleneck) a bit farther away.

  • I just purchased a new MacPro to replace my existing 2006 MacPro which cannot be undated with the new operating system.  My question is what is the safest way to transfer all my files.  1) simply install my existing 2TB HD into the new Mac Pro or 2)

    I just purchased a new MacPro 3.2GHz Quad-Core Intel Xeon processor to replace my existing 2006 MacPro 2 x 2.66 GHz Dual-Core Intel Xeon because it cannot be undated with the new Lion operating system.
    My question is what is the safest way to transfer all my files to the new computer.  1) simply install my existing 2TB HD into the new Mac Pro, set it as the startup drive, and update its10.7  operating system or 2) or use the migration program.
    I'm concerned that simply installing the existing 2TB HD, I may have issues with it not recognising some infromation written for the old 2 x 2.66 GHz Dual-Core Intel Xeon.

    your new system runs 10.6.8 just fine as has been said and stated many times.
    I would clone it first.
    I would even clone the original system it has.
    And if you have or want to use Lion and then Mountain Lion, fine - I would still keep backups of every OS.
    I am not a fan of putting the OS and Apps plus all the data all on one drive. I like to keep them separate.
    Whatever OS, rerun the last combo update is all and any other updates.
    And by "new Lion" I assume you don't mean 10.7 but "Moutain" 10.8.  Part of me says keep Lion and SL around, and test and try out ML with your apps and other hardware you may have. After too many years, waiting for 10.8.1 - and give everyone time to update their apps and retest.

  • Analogue Stereo Audio Output from the New Mac Pro

    Does anyone know what the analogue stereo audio output from the new Mac Pro is? From the specification, there appears to be a stereo output for headphones, but it is unclear what other audio outputs are available and whether a stand-alone amplifier is required to drive small stereo speakers. Yan (UK)

    It is line-level. You will need powered speakers or an amplifier.

  • How fast is the new Mac Pro 8 core comparred to Mac Pro 4 core?

    Hi,
    I consider to update my 1.5 year old Mac Pro 2.66 ghz (4 core) to a Mac Pro 8 core. I use this machine as the center in my studio running Logic 8. I use a lot of V.I. and plugs.
    Can anyone tell me anything about the gain in performance that is possible upgrading to an 8 core?
    Or show me where to find information. MacWorld use to be my resource in that kind of matters, but they never use Logic as a test program.
    Thanks in advance!
    Stigc56
    Musicmind.dk

    Glenn,
    The new Mac Pro will be faster at everything when compared to your older PowerMac, but I think the first 2 items you list will be more dependent upon drive speed.
    1. The FSB and memory are faster in the new Mac Pro, but reading from the CD will only be as fast as the optical drive can handle.
    2. How fast the TIFF file is displayed in the Finder may be more dependent upon the read speed of the hard drive than the processing speed required to create the thumbnail view displayed by the Finder.
    3. Working in CS3 should definitely be faster. Even though you didn't want a response that linked to a test, the following BareFeat test should show how much faster CS3 is on the new Mac Pro.
    http://www.barefeats.com/harper.html
    Keith

  • I urgently need to know how I can connect 8 thunderbolt display, I was thinking with the new mac pro will come out, but I wonder if it is possible to connect an iMac to 4GB of graphics card, but suffers from the imac. thanks

    I urgently need to know how I can connect 8 thunderbolt display, I was thinking with the new mac pro will come out, but I wonder if it is possible to connect an iMac to 4GB of graphics card, but suffers from the imac. thanks

    I tightened all HD screws and it didn't help. With the machine running and side of the case off, I physically stopped both the video card fan and the front case fan with my finger for a couple seconds and the noise continued. I also took all hard drives out one by one and rebooted each time. Again, the noise continued until I took out the Mac HD in Bay 1, rebooted, and I had a very quiet, silent machine. The issue is the hard drive in bay 1 that shipped with the computer, it's without a doubt causing the hum/woosh sound. I still need to know if I can safely swap the Mac HD from bay 1 to bay 4 without any issues to the operating system. I would like to try that to see if it dampens the noise but I also want to make sure this swap won't screw up my machine at all.

  • Can I set up a new Mac Pro late 2013 using a Wacom Cintique 13HD tablet as the default monitor? How would I install the driver software for the tablet?

    Can I set up a new Mac Pro late 2013 using a Wacom Cintique 13HD tablet as the default monitor? How would I install the driver software for the tablet?

    The wacom site will have the drivers for you.
    http://us.wacom.com/en/support/drivers

  • I have an imac bought late 2013, can i use it as a display for the new mac pro? I also want to use windows 8 on it, would this work with parallels or bootcamp?

    I have an imac bought late 2013, can i use it as a display for the new mac pro? I also want to use windows 8 on it, would this work with parallels or bootcamp?

    Yes, it supports target display mode. Windows can be run with either Parallels or Boot Camp.

Maybe you are looking for

  • Update data from cube to cube in BW 3.5

    Dear Experts,         Can we update data from one cube to another cube in BW 3.5. i tried it, I created the connection between two cubes as i did in ods to cube through update rules but there is no option like in ods to send the data(update dso data

  • Transformation Issue

    Hello Everyone, I have installed all the SAP BI infocubes and ODS  in the BI 7.0. Everything is working fine. Suddenly the basis guys installed  new support pack in BI, now i am having some data load issues. I am getting the start routine syntax erro

  • Unable to connect to unsecured wifi

    My iPhone was unable to connect to my workplace unsecured wifi. The IP address, as well as the other details are as follows: IP Adress : 10.182.203.17 Subnet Mask : 255.255.255.192 Default Gateway : 10.182.203.1 Preferred DNS Server : 161.142.201.17

  • 9300 LCD 'Cover' Screen

    ARRRGGHHH Hi, I dropped my phone yesterday whilst outside and got kicked by someone walking past me :-| Unfortunately the lcd screen on the front of the phone has been cracked in 3 places making it useless. I have no insurance with my phone contract

  • Wi-Fi gone: "No Airport Card Installed."

    Last night I watched Netflix just fine,  put my laptop to bed and this morning, no wif-fi connection!!. Blank airport icon reading "No Airport Card Installed." Recently installed new battery, not that that probably matters. Do you think my Airport Ca