Can we access two different Siebel BO in Same OPA Rule Base

Hi all,
can we access two different BO's from same rule base.
what i means is,can we pass siebel data to OPA Rule Base from two different BO's .
Thank you for your help in advance.

There are two approaches to do this and they both involve making some small changes on the Siebel side.
You can create an Integration Object which contains all the business components that you want to send to OPA if you are using an Integration Object mapping.
If you would prefer to use a Business Object mapping then you will have to create a new Business Object which combines the BCs of all the Business Objects that you want to send to OPA.
As you can see, although one approach involves Integration Objects and one involves Business Objects they both work by creating a single object which is an amalgamation of the information that you want to send to OPA.
Cheers
Frank

Similar Messages

Can I access two different libraries on the same computer with the remote app?

I am in the process of upgrading our home network. There is going to be an airport express in each of the main rooms of our house all running to a switch connected to our AirPort Extreme. The reason for this is so we can stream our music in any or all of the rooms we choose. I'm going to have a Windows 7 PC running iTunes constantly also connected so that we will have access to the entire library on any of our devices. My entire library will be housed on an external hard drive that will be connected to the Extreme. Here is where it gets tricky. My wife has a separate library that we want to have access to as well. It is going to be housed on a separate external hard drive connected to the Extreme via a USB hub. I don't want to combine our libraries because hers is absolute chaos and mine is very well organized. Without having to have a second computer running iTunes constantly, is there a way we can access both libraries simultaneously with the remote app? Either by running two instances of iTunes on one computer or some other way I'm not realizing. As it works right now, if we're both running iTunes on our laptops, then I can go onto my iPad and see both full libraries on the remote app. I want to do that, but with just one computer.

I doubt it is possible to run two instances of iTunes on the computer at the same time. To do so would require two users to be signed in and running iTunes under each user.
The better solution would be to either clean up and merge the two libraries or have iTunes running on a second computer.

Can you have two different iTunes accounts on same computer?

Can you have two different iTunes accounts on same computer?

J2217 wrote:
I'm going to give my old iPad to my granddaughter, I want to create an account for her, but I want to do it on my computer so there are no worries about who is spending credits for that account. Don't know how this will work, or if its possible to two iTunes libraries.
Okay.
She's going to use your computer to sync with iTunes.
Create an new computer login on your computer for her. This will keep her stuff separate and she won't be able to mess with any of your info.
Log into her computer account.
Launch iTunes.
Create a new iTunes account for her. See this -> http://support.apple.com/kb/HT2731
You can enter a credit card to create the account then delete the CC info. Or you can use an iTunes gift card and she can fund the account with gift cards instead of using a CC to make purchases. This is an easy way to control spending.
on the iPad, go to Settings > iMessage > Off.
Then Settings > General > Reset > Erase all content & settings.
Once it finishes, plug in the iPad, select it in iTunes and this will set it up as a new device. Enter all your granddaughter's info.
When she wants to sync her iPad or use iTunes, she needs to log into your computer with her account.
Then the iTunes library she uses will be only hers.

HT204380 Can you FaceTime two different people at the same time?

Can you FaceTime two different people at the same time?

No, not at this time. Feedback to Apple goes HERE, and click on the appropriate section.

Can i load two different itunes on the same computer for two different ipods?

Can I load two different itunes on my computer for two different ipods? Or how can I get it so that when I click on itunes, only my songs come up and not my wifes? And the same for her.

Yes. The simplest way is to have separate Windows accounts for each user. When either user runs iTunes, he/she will have a separate library with distinct content, playlists, etc., and can sync individual iDevices as needed.

How can i deploy two different versions of the same application on the same server??

I have two different versions of an application. One is a released version. And another version under development. I need to port this version of the application to the same server. I'm using the same classes and packages(except for some new ones). Is it sufficient if i change the name of my ear(application name). Or should i change my code also.

Hi
You can repackage the new versions of ear,jar and war with different names. I hope that should work well.
Cheers
-pradeep

Can I run two different ipods from the same laptop?

Hi, I am very new to all this. Is it possible to have two different ipods running from itunes on the same computer. If it is how do I separate them so when I connect and ipod it doesn't sync both lots of music.
Please Help me
Thanks
Hoolie

I'm currently syncing three iPods to the same library. iTunes will recognize each iPod as a unique device. My preferred method of managing my iPods is "Sync Selected Playlists". This allows me the convinience of syncing (and all my ratings, playcounts and last played sync) while still being able to control what goes on each iPod. You can set your preferences for each iPod. You could managage one manually and sync the other. Whatever works best for you.

How can I run two different vi's in same project which are accessing same global variable with out effecting the speed of the execution of both the vi's

Hi
I have build an Labview project with FPGA target . I have configured an FPGA VI and an host Vi to acquire data and logged the data to a file and stored the latest data in a global variable simultanously. I have configured one more VI in the same project to access the global variable. I have build a dll to access both the VI as functions in LabWindows/CVI code. My task in CVI is to update configured GUI with latest data periodically and run the host VI continously for a long time and log the data to a file. GUI should update for every one second with latest data for this I am using the second VI in which I am accessing the global varibale in which the latest data has been stored in host VI.

Duplicate Post (go here)

Can I use two different scales in the same graph on LabVIEW5.11

I found that this can be done in LabView6i but I'm using 5.11. Can I do that also?

ctbiu,
After playing around with LabVIEW 5.1.1, it appears that the addition of a second scale was a new feature introduced into the graph and chart controls in LabVIEW 6i. It does not look possible in LabVIEW 5.1.1. If you need this functionality, I would suggest upgrading to LabVIEW 6.1, the current version of LabVIEW.
Randy Hoskin
Applications Engineer
National Instruments
http://www.ni.com/ask

How Can i Use two Different Public IP Addresses no my DMZ with ASA Firewall.

How To Using Two Different Public IP Address on My DMZ with ASA 5520
Postado por jorge decimo decimo em 28/Jan/2013 5:51:28
Hi everyone out there.
can any one please help me regarding this situation that im looking for a solution
My old range of public ip address are finished, i mean (the 41.x.x.0 range)
So now i still need to have in my DMZ another two servers that will bring some new services.
Remember that those two server, will need to be accessable both from inside and from outside users (Internet users) as well.
So as i said, my old range of public ip address is finished and we asked the ISP to gives some additional public
ip address to address the need of the two new servers on DMZ. and the ISP gave us the range of 197.216.1.24/29
So my quation is, on reall time world (on the equipment) how can i Use two different public ip address on the same DMZ
on Cisco ASA 5520 v8??
How my configuration should look like?
I was told about implementing static nat with Sub Interfaces on both Router and ASA interface
Can someone please do give me a help with a practical config sample please. i can as well be reached at [email protected]
attached is my network diagram for a better understanding
I thank every body in advance
Jorge

Hi,
So looking at your picture you have the original public IP address range configured on the OUTSIDE and its used for NAT for different servers behind the ASA firewall.
Now you have gotten a new public IP address range from the ISP and want to get it into use.
How do you want to use this IP address range? You want to configure the public IP addresses directly on the servers or NAT them at the ASA and have private IP addresses on the actual servers (like it seems to be for the current server)?
To get the routing working naturally the only thing needed between your Router and Firewall would be to have a static route for the new public network range pointing towards your ASA OUTSIDE IP address. The routing between your Router and the ISP core could either be handled with Static Routing or Dynamic Routing.
So you dont really need to change the interface configuration between the Router and ASA at all. You just need a Static route pointing the new public IP address towards the ASA outside IP address.
Now when the routing is handled between the ISP - ISP/Your Router - Your Firewall, you can then consider how to use those IP addresses.
Do you want to use the public IP addresses DIRECTLY on the HOSTS behind the firewall?This would require you to either configure a new physical interface with the new public IP address range OR create a new subinterface with the new public IP addresses range AND then configure the LAN devices correspondingly to the chosen method on the firewall
Do you want to use the public IP addresses DIRECLTY on the ASA OUTSIDE as NAT IP addresses?This would require for you to only start configuring Static NAT for the new servers between the inside/dmz and outside interface of the ASA. The format would be no different from the previous NAT configuration other than for the different IP addresses ofcourse
Of the above ways
The first way is good because the actual hosts will have the public IP addresses. Therefore you wont run into problems with DNS when the LAN users are trying to access the server.
The second way is the one requiring the least amount of configurations/changes on the ASA. In this case though you might run into problem with DNS (to which I refer above) as the server actually has a private IP address but the public DNS might reply to the LAN hosts with a public IP address and therefore connections from LAN could fail. This is because LAN users cant connect to the servers OUTSIDE NAT IP address (unless you NAT the server to public IP address towards LAN also)
Hopefully the above was helpfull. Naturally ask more specific questions and I'll answer them. Hopefully I didnt miss something. But please ask more
I'm currently at Cisco Live! 2013 London so in the "worst case" I might be able to answer on the weekend at earliest.
- Jouni

Can we have two different itunes accounts on the same mac?

Can we have two different itunes accounts on the same account? I am having trouble accessing mine from my sons.

Yes you can.
The fact you cannot access your son's library from your User account is intentional. User accounts on your Mac are nearly as separate from each other as your Macs are from anyone else's on the planet. To copy music from his account to yours, first copy it to the Shared folder, then log into your account and import the music. Then, you can erase it from Shared.
The Shared folder exists at /Users/Shared.
Read
iTunes: How to share music between different accounts on a single computer
OS X Mavericks: Set up users on your Mac

Users are not able to access two different SAP portals at a time

Hi Experts,
Users are not able to access two different SAP portals at a time, if users login the OLD SAP Portal then they are not able to access NEW SAP Production Portal asking user id's & Password while doing ECC & APO transactions.
If user clear the Internet Explorer cache then for time being they can access but its not the permanant solution.
Can any one please help me on this.
Thanks,
Jay

Hello Jay,
here we are facing this problem, this company users not able to access both the portals at at time
If you want to access HTC and Armed at the same time you gotta complete SSO Config or User mapping between these two Portals. You can refer to the below link for more details.
http://help.sap.com/saphelp_nw04/helpdata/en/f8/3b514ca29011d5bdeb006094191908/content.htm
Thanks
SM

How can I interact between two different frames in the same indesign template as well as from one template to another.

I am looking for the best way (or any way) to interact between two different frames in the same indesign template as well as from one template to another. It's for a DPS app which needs to carry some button initiated data from one page to another and then present it in a table.

There is no simple way to do it, as itunes wont let you use it on another computer without wiping the contents first.
However if you really want to transfer songs to another computer then you could try this;
* make sure that your ipod is accessible as a disk drive (ipod options)
* when you plug your ipod into the computer you want to transfer to make sure you select "no" or "cancel" when it asks to wipe the contents. Leave the ipod connected and quit from itunes.
* go to "my computer" and access the ipod directly. You probably have to select "view hidden files" from windows. You will see a lot of folders with odd names like ZX838aff with similar named files inside.
* copy these files to a folder on your computers hardrive. Now remove the ipod and start itunes.
* import the files from the folder you made in the last step.
* Now your music is on itunes, but with unrecogisable names.
This is the only way I have found to do it, but there may be another way, say with an application to do the hard work for you.
Generic homebuild PC Windows XP
Generic homebuild PC Windows XP

Can you have two different users with itune accounts on the same computer?

Can you have two different users with separate itune accounts on the same Ipad?

Yes, create another user profile on the computer and each user can log into their own profile that way.

HT204053 If I have set up my Mac with two different users, can I use two different Apple IDs on the same Mac?

If I have set up my Mac with two different users, can I use two different Apple IDs on the same Mac?

Each user account may have its own Apple ID.

Can we access two different Siebel BO in Same OPA Rule Base

Similar Messages

Maybe you are looking for