Can we add additional fields in work center creation using any user exit ?

Hi,
is there any user exit using which we can have some tab and fields such that we can add/ update the equipment to wotk center in CR01 ?
regards,
madhu kiran

hi,
requirement is can i get the additional fields like equipment and asset in the work center creation ?
i would like to maintain these against a work center
and using any user exit can i add additional fields ?
regards,
madhu kiran

Similar Messages

How can we add additional fields to the BP Search RESULT screen?

Dear Experts,
How can we add additional fields to the BP Search RESULT screen so that the BP's being displayed in a search result show maintained values for the particular column/field?
Thanks!!!

Hi Laxman,
I got same requirement for ibase hierarchy.I want to add new fields in Ibase hierarchy AB.Do you have any idea regarding this.My requirement is that ,i want to dispaly a fields as a check box which display that this component is in under warranty or not by checking the box.Plz tell ,how can i add a new field in tree type context node.I add a new fields using AET ,but that is not available in that AB.
Thanks
Vishwas Sahu
Edited by: vishwas sahu on Nov 17, 2009 1:51 PM
Edited by: vishwas sahu on Nov 18, 2009 5:22 AM

Can I add additional fields to filtering on in convergence or commExpress?

I have just installed Communications Suite 6 for evaluation, primarily interested in the Messaging Server. In Convergence and Communications Express, mail can be filter based on text in the sender, subject, to, cc headers or message size. Is it possible to add headers for filtering? We would be using Mimedefang/Spamassassin to rate SPAM, and adding an "X-SPAM-Level" header with the rating result. We would like our users to be able to filter mail based on that header line.
Thanks

dpalix2 wrote:
Thanks for your suggestion, but I'd like to leave the filtering to my users, so I'd rather not employ a systemwide solution. What I'm hoping for is a configuration option that will add other fields to the Convergence and/or COmmunications Express drop down menu.You can add an additional "X-Spam" header check to Convergence by using the following customization:
c11n/config.js
dojo.provide("c11n.config");
c11n.config = {
 // allDomain configuration
 allDomain: {
 module: "allDomain", // module name
 themeEnabled: false, // true if theme is customized
 i18nEnabled: false, // true if i18n is customized
 jsEnabled: true // true if js is customized
 // the last entry must not end with comma
}c11n/allDomain/js/customize.js
dojo.provide("c11n.allDomain.js.customize");
// Add X-Spam header check to Filter Interface
dojo.require("c11n.allDomain.js.widget.NewMailFilter");c11n/allDomain/js/widget/NewMailFilter.js
dojo.provide("c11n.allDomain.js.widget.NewMailFilter");
dojo.require("iwc.widget.NewMailFilter");
dojo.declare("iwc.widget.NewMailFilter", iwc.widget.NewMailFilter, {
 buildRendering: function() {
 this.inherited(arguments);
 // add new X-header1 field as new criteria
 var elem = dojo.query("select.matchSubject", this.dynamicCriteriaBox);
 if (elem && elem[0])
 elem[0].innerHTML += '<option value="X-Spam">X-Spam</option>';
 postCreate: function() {
 // next release will have addMatchingHeader function defined
 // for each additional X-header, add it to the internal opdTable
 if (this.addMatchingHeader)
 this.addMatchingHeader("X-Spam", ["X-Spam"]);
 else
 this.opdTable["X-Spam"] = ["X-Spam"];
 this.inherited(arguments);
 last: ""
});For more background on Convergence customizations refer here:
http://wikis.sun.com/display/CommSuite/Convergence+Customization+Guide
Regards,
Shane.

How To Add Additional Fields When Creating New Contact From w/in Mac Mail?

Hi there. When in Mac Mail and clicking on contact information provided within an email, we are able to either (1) CREATE NEW CONTACT or (2) ADD TO EXISTING CONTACT (by clicking on the arrow next to a phone number, address, etc.). If I choose "Create New Contact," how can I add additional fields BEFORE clicking on "Add to Address Book" button in lower right corner? Let's say, for example, I know this new contacts URL or company. (Currently, I am creating the new contact from within Mac Mail and then going to Address Book and finding the contact, then editing, the adding the additional fields, then saving, and then going back to Mac Mail. This all takes time.)
Note: When creating a new iCal event from within Mac Mail, we can click on Option/Alt key when selecting drop-down arrow...and this will allow us to add additional information. The same feature isn't available for address book???

I have the exact same question and problem. If there was a way to automatically open the AB entry after "creating new contact" this would solve it.
Thanks for any suggestion

Is there any user exit for changing V1 field value?

Hello Expert,
Is there any user exit for changing V1 update value?
For example, sales order number will populate 2LIS_11_VAHDR-VBELN. If other value need to populate 2LIS_11_VAHDR-VBELN, can we use any user exit to customize the V1 routine?
Please forget the enhancement for 2LIS_11_VAHDR. Just populate the system field VBELN.
Thanks
F-B-I

Hi,
Use the 'usual' user-exit for transactional data in R/3 EXIT_SAPLRSAP_001 (CMOD). Here your can overwrite VBELN for each extracted record with the value you want.
Hope this helps.
Grtx
Marco

Add additional field in the output list

Tcode(VL10G) .ie.out put list will not showing one new field.I want to add one more field to output list. field(VIKP-SDABW) In the SHP_VL10_ITEM and write the logic in the exit LV50R_VIEWG05----
>USEREXIT_PREPARE_LAYOUT_FILL.Plase explain me step-by-step.It is very uggent?Please help me.
Thanks & Regards,
sairam

Hi Sairam,
Go through this info.
/3 provides three "customization spots" that allow you to enhance FI/CO features without modifying the standard code. Although often collectively referred to as "user exits," two of the three have different names. SAP Enhancements are used to expand the standard functionality within SAP. Enhancements use function modules and are called from the standard SAP code. Each module in the system has a set of delivered enhancements that help companies expand the standard functionality where they need it. Enhancements were new in release 3.0.
The Open FI Interfaces or Business Transaction Events are also used to expand the standard functionality within SAP. These events are defined in the IMG. Business Transaction Events were new in release 4.0. They are not available for all modules and are not called on all integrated transactions into FI as of release 4.5B. This will change with each release and should be retested.The older User Exits in FI/CO are "Z" programs that are defined in table T80D for client-dependent user exits, and in table T80I for client-independent user exits. These are also used to expand the standard functionality within the FI/CO modules. These User Exits have been available since the early releases of SAP. All of these FI/CO User Exits are listed in this document in the Configuring User Exits (Older). The list is included because these User Exits are not a part of the Enhancements or Business Transaction Events and do not have an Info System for searching.
Benefits        Standard SAP functionality can be enhanced without modification to the standard code.
        Upgrades do not erase the functionality and it does not have to be re-transported or re-entered into the system. The enhancements should be thoroughly tested when upgrading to ensure the system will still work as implemented.
Configuring SAP Enhancements
Basic Steps in Configuring an Enhancement
        Find the appropriate Enhancement.
        Enter the ABAP code in the "Z" program within the function module.
        Create a project.
        Add the Enhancement to the project.
        Activate the project.
Example Business Scenario for Enhancements
Company A has a requirement to validate all customer master records created with a U.S. address. The U.S. entity reports on the industry field on the customer master. This is only a U.S. requirement and should not be required for the other countries, so the field status would not work. To accomplish this requirement, Company A will need to set up an Enhancement for the customer master transaction. The necessary steps are detailed below with screenprints. This example was configured in a 4.6C system.
Detailed Steps
1.    Tools   ABAP Workbench   Utilities   Enhancements   Definition   Utilities   List Enhancements
2.    Do not execute this without any parameters! There are too many Enhancements and it will probably time out. Youre searching for a customer master exit. Enter mast in the short text (see Figure 1). Youll start there. Searching for an exit can be tricky, so make sure you try several things before giving up.
3.    Execute the search.
Figure 1. Start Your Search for a Master Exit Here
4.    Look through the list until you find the Enhancement for User exits: Customer Master Data.
5.    Double-click on the enhancement SAPMF02D. This will take you to the details of the Enhancement and list the function modules included in the Enhancement.
6.    To continue, double-click on the function module EXIT_SAPMF02D_001
7.    This will take you to the source code for the function module. Click on the Import tab to review the tables/fields that are available for the Enhancement (see Figure 2).
Figure 2. The Tables That Are Available for the Enhancement
8.      To view the tables/fields that can be changed in the function module, click on the Export and Changing tabs. For this function module, these tabs are empty because you can only validate data. You cannot change any fields in this enhancement.
9.      Return to the Source Code tab.
10. Scroll down until you see the Include statement in the program. The "Z" program listed after the Include is where your code will be written (see Figure 3).
Figure 3. Your Program Will Begin After the Include Statement
11.   Double-click on the Include. You will be prompted to create the include. Click on Yes to create.
12.   At this point you will be prompted to enter a development class and to create a transport request. If you do not know which development class to use, please contact your technical team.
13. Enter the following ABAP code into the program (Figure 4):
User exit to ensure that all US customers have a group key
entered on the customer master.
if i_kna1-land1 = 'US' and
i_kna1-brsch = ' '.
message e001(F2).
endif.
Figure 4. The ABAP Code You Need to Enter
14.   Note that the table name matches the table name in the import tab tables.
15.   In this example you are using the standard message class F2 with message number 001. Normally, you will create your own message within your own message class. All customer message classes must begin with a "Z" and are created in transaction SE91.
16. Save the program.
17. The next step is to create the project. Go to transaction code CMOD or follow menu path: Tools   ABAP Workbench   Utilities   Enhancements   Project Management.
18. Enter the project name; begin the name with a "Z."
19. Click on the Create button.
Figure 5. Click on Create After You Type in the Project Name
20.   Enter in a description for the project.
21.   Click on the Enhancement Assignments button.
22.   You will be prompted to save the enhancement. Click on Yes.
23.   At this point you will be asked for a development class and to create a transport for the project. You may use the same one created when adding the ABAP code to the function module.
24. Enter the name of the enhancement SAPMF02D (see Figure 6).
Figure 6. Enter the Name of the Enhancement Here
25. Save the project.
26. Back out of the enhancement assignment.
27. Activate the project by hitting the Activate button.
The SAP Enhancement is ready to be tested! Try creating a customer with U.S. as the country and a blank group key. Be sure to test one with a group key to make sure the message is not displayed in error as well.
Configuring Business Transaction Events
Basic Steps in Configuring an Event
        Make sure the application is active for Business Transaction Events.
        Copy the sample interface function module into a "Z" function module.
        Enter the ABAP code into the source code section of the new "Z" function module. You may choose to create a "Z" program to enter the code into and then insert the "Z" program into your function module source code.
        Activate the function module.
        Assign the function module to the event, country and application.
Example Business Scenario for Business Transaction Events
Company A would like to copy the group key field from the vendor master into the allocation field on all the line items within a vendor invoice and payments, including the vendor lines. This requirement assumes only one vendor is posted to in a document.
To accomplish this requirement, Company A will use the Business Transaction Event 1130, Post Document: SAP Internal Field Substitution.
1.      IMG Menu Path: Financial Accounting   Financial Accounting Global Settings   Use Business Transaction Events   Environment   Infosystem (Processes).
2.      Find the correct Business Event. You are updating a field, so you select the Processes Info System instead of the Publish and Subscribe Info System.
3.      Execute the search with the defaults.
4.      Find the correct interface for updating a document: Post Document: SAP- Internal Field Substitution (see Figure 7).
Figure 7. Find the Correct Interface for the Business Event
5.      Put your cursor on the event and click on the Sample Function Module button.
6.      You are now in transaction SE37 Function Builder. This is the function module (sample_process_00001130) you will need to copy into a "Z" name function module for your coding (see Figure 8).
Figure 8. This Is the Function Module You Need to Copy Your "Z" Name Function Module
7.      Click on the Copy button.
8.      Enter the "Z" function module name in the To Function Module field (see Figure 9).
9.      Enter a Function Group. If you need to create a "Z" function group, go to transaction code SE37 and follow menu path: Go to   Function Groups   Create Group. A function group is a logical grouping of function modules, and the ABAP code is generated for function groups. You will be prompted for a development class and transport when creating the function group.
Figure 9. Enter Your "Z" Function Module Name Here
10. In Function Builder (transaction SE37), enter the new "Z" function module. Click on the Change button.
11. The system will default into the source code screen where you may enter your ABAP code.
12. Notice the tables available for the code. Additional tables may be declared if necessary.
13. Enter the following source code (see Figure 10):
tables: lfa1.
data: z_groupkey like lfa1-konzs.
z_groupkey = ' '.
loop at t_bseg.
check for vendor lines. If one is found, read the vendor master and
retrieve the group key field.
if t_bseg-koart eq 'K'.
select single konzs from lfa1 into z_groupkey
    where lifnr = t_bseg-lifnr.
endif.
Move the group key field into all line items allocation field.
loop at t_bsegsub.
t_bsegsub-zuonr = z_groupkey.
modify t_bsegsub index sy-tabix.
endloop. "t_bsegsub
endloop. "t_bseg
Figure 10. The Screen Where You Enter Your Source Code
14. Save the function module.
15. Back out to the main Function Builder screen by clicking on the green arrow button.
16. Activate the function module by clicking on the Activate button (see Figure 11).
Figure 11. Activate the Function Module from This Screen
17. Assign the function module to the event in the IMG: Financial Accounting   Financial Accounting Global Settings   Business Transaction Events   Settings   Process Function Modules   of an SAP Appl.
18. Hit enter past the warning messages that this is SAP data.
19. Click on the New Entries button.
20. Enter the process for your interface. In your example it is 00001130.
21. Enter the country the interface is valid for. If it is valid for all countries, leave this field blank.
22. Enter the application the interface should be called for. If it should be called for all applications, leave this field blank. Please note that not all integrated transactions are programmed to go through these interfaces! You will need to test to find out!
23. Enter the new "Z" function module (see Figure 12).
Figure 12. Enter Your New "Z" Function Module Here
24. Save the settings. At this point you will be prompted for a CTS number for the configuration change.
25. The Business Transaction Event is complete! You are ready for testing.
Configuring User Exits (Older)
Basic Steps in Configuring an User Exit
      Create a "Z" program for the User Exits and enter the necessary ABAP code.
      Enter the new program name into table T80D.
      Configure the application to call the User Exit.
List of User Exits
      Variable Field Movements
      Substitutions in FI, CO, PCA
      Validations in FI, CO, PCA
      Rollups in SPL
      Fixed Field Movements in SPL
      Cost Center Summarization on Detail Screen
      Sets Formula Variables
Example Business Scenario for User Exits
Company A would like to add a "Z" field in the Special Purpose Ledger to capture a Business Unit field for reporting. They have used all the standard SAP fields such as Business Area and Profit Center. The field will only be used for reporting and is only needed in the Special Purpose Ledger. You created a special ledger table (ZZSPL1) with field Z_BUNIT and need to populate this field based on a combination of G/L account, fund and functional area.
To accomplish this requirement, Company A will use the Variable Field Movement User Exit. To make maintenance easier, table ZZBUSUNIT was created with the G/L account, fund and functional area fields as key fields, and the business unit field as a non-key field. You generated the table maintenance so the table could be updated using transaction SM30. SAP users update the business unit determination rules in table ZZBUSUNIT by entering the G/L account, fund and functional area, and then the business unit that combination should be posting to. The User Exit will read table ZZBUSUNIT using the G/L account, fund and functional area from the posting transaction and determine the business unit. The steps for using the user exit are detailed below. This example was created on a 4.6C system.
1.      Copy the delivered template User Exit program RGIVU000_TEMPLATE into a "Z" program. Follow menu path Tools   ABAP Workbench   Development   ABAP Editor (transaction code SE38). In early releases, the delivered program was RGIVU000.
2.      You will be prompted for a development class and a transport. Please check with the technical team for the correct development class.
3.      At the initial ABAP Editor screen, enter your new "Z" program name, select the Source Code button and click on Change (see Figure 13).
Figure 13. To Enter Your New Code, Select Source Code and Click on the Change Button
4.      Enter the following code in the User Exit (Figure 14):
FORM E01_MVC USING FROM_FIELD TO_FIELD.
to_field = 'CORP'. "Set a default business unit.
read table zzbusunit to determine the business unit field.
select single z_bunit from zzbusunit into to_field
   where hkont = accit_glx-hkont and
    geber = accit_glx-geber and
    fkber = accit_glx-fkber.
ENDFORM.
Figure 14. Enter Your New Code at This Screen.
5.      Activate the program by clicking on the Activate button.
6.      Change the configuration in the User Exit table to point to your new "Z" program.
7.      Follow the IMG menu path: Financial Accounting   Special Purpose Ledger   Basic Settings   User Exits   Maintain Client Specific User Exits.
8.      The entry to maintain is application area GIMV: Variable Field Movement. Enter your "Z" program (see Figure 15).
Figure 15. Enter Your "Z" Program in the Application Area GIMV: Variable Field Movement
9.      Save the changes.
10. The final configuration step is to assign the User Exit in the variable field movement for your special ledger table. In the IMG: Financial Accounting ? Special Purpose Ledger ? Basic Settings ? Master Data ? Maintain Field Movements. Field movements control how the fields in a special ledger table are populated. They can be populated straight from other fields in a posting or through User Exits.
Figure 16. After You Assign the Business Unit Field and the G/L Account, the Exit Field Should Contain U01.
11. Assign the business unit field as a receiver and the G/L account as the sender. The Exit field should contain U01 (see Figure 16).
12. The User Exit number U01 calls User Exit E01_MVC form in the "Z" program.
13. Save the field movement.
14. You are ready to test your User Exit!
Rewords some points.
Rgds,
P.Naganjana Reddy

Screen exit for MM01 to add additional fields to basic data tab .

Hi All ,
We are working on the SAP version ECC 5.0 . Our requirement is to add additional fields to the general data section of the basic data1 tab for the tcode MM01 . I have gone through many previous queries in SDN but not able to figure out what exactly the process should be . All I could figure out is to start the process from appending the structure to MARA for the additional fields . Then follow the steps in the SPRO .
Define Structure of Data Screens for Each Screen Sequence
Assign Secondary Screens
Maintain Order of Main and Additional Screens
Assign Screen Sequences to User/Material Type/Transaction/In
Define How Maintenance Statuses Are Determined in Data Trans
Create Program for Customized Subscreens
I am not able to comprehend what we are trying to do in these steps .
Can anyone explain me in detail what we are trying to do in the whole process ?
Thanks ,
Varun .

Hi varun,
Create the append structure on the MARA table.
The SAP note 44410 describes how to add the new fields to the screen and how the updating will work.
1.     Make a copy of function group MGD1to ZMGDI as stated inthe Ossnote using program COPYMGDI.
2.             Goto Se38 enter program name SAPLZMGDI Click Display and goto> program-> other object---> enter screen number '0001' and add your fields to the subscreen which should apper on the the general data section of the basic data1 tab for the tcode MM01
2.     Make the changes stated in SAP Note.
3.     After make the changes the functional analyst will need to make some configuration changes.
4.     SPRO -> Logistic General -> Material Master -> Configuring Materal Master -> Define Structure of Data Screens Sequence.
5.     Select SSq = 21 then click on Subscreens select Basic DATA1
6.     Enter in the new screens that were built
7.     Change the row that was create putting in the program (function group program) that was created in step 2.
Thanks and regards,
Pavankumar

How to add additional field to the existing report

hi,
report name is RHXPE_EXPIRED_QUALI
if u execute report alv list is genereted with like this.
object type, id of related object, object name, object type, id of related object,last name, first name like this
where can i get these field descriptios in the prigram becoz many perform ststements r there. i want to add additional field text.
program is:
CORRECTIONS
DATE       CORRECTION NOTE    AUTHOR DESCRIPTION
09.03.2001            0388404 XSC    Wrong list output for multiple Os
05.06.2001 AL0K023393 0410219 Lud    Wrong keydate for search with
                                     Pchbegda and pchendda.
30.01.2002 S6BK000033 0491055 TS     Report: RHXPE_EXPIRED_QUALI
                                     doesn't provide a spool list.
REPORT rhpk_find_pers_with_expired_qu MESSAGE-ID pq.
TABLES : pchdy.
INCLUDES
INCLUDE rhxmacro.
INCLUDE rhpeini0.
TABLES
DATA: objects LIKE hrsobid    OCCURS 1 WITH HEADER LINE.
VARIABLES
DATA: subrc LIKE sy-subrc.
DATA: orgeh_text LIKE t777o-otext.
SELECTION SCREEN
objid
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
PARAMETERS:
   pchplvar LIKE p1000-plvar NO-DISPLAY,    "plan version
   pchotype LIKE pchdy-otype NO-DISPLAY. "objecttype
Objid
rhx-f4-objid-data.
SELECT-OPTIONS: pchobjid FOR pchdy-objid_str NO INTERVALS.
Search
PARAMETERS:
pchseark LIKE pchdy-seark.           "matchcode object plom.
SELECTION-SCREEN END OF BLOCK b1.
Objecttime
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-001.
PARAMETERS: se_begd LIKE p1000-begda DEFAULT sy-datum, "'19000101',
            se_endd LIKE p1000-endda DEFAULT high_date.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-005.
PARAMETERS:
   h_events LIKE dynp_rhpp-gen_train, "with training sugg
   h_qual LIKE dynp_rhpp-expired_qual. "with Qual
SELECTION-SCREEN END OF BLOCK b3.
AT SELECTION-SCREEN ON pchobjid.
PERFORM check_objid_sign(rhxchk00) USING pchobjid-sign.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pchobjid-low.
rhx-f4-objid-low pchplvar pchotype pchobjid '' ''.
AT SELECTION-SCREEN.
PERFORM check_plvar(rhxchk00) USING pchplvar.
PERFORM check_seark(rhxchk00) TABLES pchobjid
                                USING pchseark pchplvar pchotype.
INITIALIZATION
INITIALIZATION.
PERFORM read_t77s0_parameters_for_pe.
get user parameters/Planvariante und Beginndatum setzen:
pchotype = $orgeh.
CALL FUNCTION 'RHP0_USER_PARAMETERS_GET'
       EXPORTING
            fill_if_initial = 'X'
       IMPORTING
            plvar           = pchplvar
            begda           = se_begd
            endda           = se_endd
          with_key        =
          SUBSTITUTE      =
          ESSENTIAL       = only_essential
            org_unit        = pchobjid-low
      EXCEPTIONS
            OTHERS     = 0.
SE_BEGD = LOW_DATE.   "Correction AL0K023393 0410219
IF NOT pchobjid-low IS INITIAL.
    pchobjid-sign   = 'I'.
    pchobjid-option = 'EQ'.
    APPEND pchobjid.
ENDIF.
START-OF-SELECTION
START-OF-SELECTION.
correction 0491055
correction was done for getting a spool list in background-processing.
CASE sy-batch.
    WHEN space.
      SUBMIT rhpe_expired_quali
           WITH pchplvar = pchplvar
           WITH pchotype = pchotype
           WITH pchobjid IN pchobjid
           WITH pchbegda = se_begd
           WITH pchendda = se_endd
           WITH h_qual = h_qual
           WITH h_events = h_events
                  AND RETURN.
    WHEN 'X'.
      SUBMIT rhpe_expired_quali
           WITH pchplvar = pchplvar
           WITH pchotype = pchotype
           WITH pchobjid IN pchobjid
           WITH pchbegda = se_begd
           WITH pchendda = se_endd
           WITH h_qual = h_qual
           WITH h_events = h_events
                  TO SAP-SPOOL.
ENDCASE.
END-OF-SELECTION
END-OF-SELECTION.

Hi,
I think you need to show more programs.
you said, the report program is 'RHXPE_EXPIRED_QUALI', but you upload 'rhpk_find_pers_with_expired_qu' program.
usually, ALV field is modifyed in 'PERFORM fieldcatalog_modify', if you use Functional ALV.
Try to search 'fieldcatalog function', you will find easy.
Regard,
SY Kim

How to add Additional fields in standard SAP Report RMCLOBJVN ,TCODE CL6BN

i am facing problem in Report RMclobjvn , TCODE is CL6BN
i have to add some additional fields on the result screen.
but when i search inside the report i could not retrieve any user exits but through a search utility i got 4 user exits of which 2 seem to be useful.these are
Exit name
CLCLRS01 Additional Fields on the Result Screen
CLCLRS02 Fill the Additional Fields on the Result Screen
i activated the these exits and have tried putting in break point in side the include.
But the problem is this that
[b]that CL6BN Tcode is not triggering anyhow these userexits.
does anyone has any solution for adding the additional fields.

Hai Manish
Check the following Links
You can do it in two ways using append structure or include structure of that standard table.
once you added , you need to adjust it and activate using the menu utilities->data base utulity-> Activate and Adjust .
check this SAP help..
for append structure
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eb61446011d189700000e8322d00/frameset.htm
for include structure.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eb54446011d189700000e8322d00/content.htm
Regards
Sreeni

How can we add new fields in item customer detail B tab in VA01/VA02/VA03?

Hi all,
Anyone can suggest me, how we can add fields in item detail B tab of VA01/VA02/VA03 transaction.
1) How we can find the screen no and how we can add fileds in it
2) where we have to write the logic for these fields ( I mean in which include)
3) Is there any user exit or BADI for this
4) what is the procedure to do this enhancement .
5) How we can enhance menu bar
i am using ECC 6.0 version.
Please guide me in this .
Thanks in advance.

Hi,
You do not have to do extra coding for this. Just append the extra fields in the table VBAP and include these in the screen 8459 (Additional data A) or 8460 (Additional data B) of program SAPMV45A.
https://forums.sdn.sap.com/click.jspa?searchID=12244867&messageID=1939475
Regards
Kiran Sure

How to add additional fields to zreport which contains standard report code

Hi Experts,
In order to add additional fields to standard report i copied the code into zreport but i am unable to add additonal field into report because the code is looking so complex.
standard report:AQZZ/SAPQUERY/FKF1============
     or
sapmenu->accounting->financial accounting->accounts payable->information system->reports for accounts payable accounting->master data->S_ALR_87012087-Addresslist.
Additional feilds to add is :Region,company code,country
Please let me know how toidentify ALV and guide me how to solve this.
Regards,
naresh.

Hello Naresh,
First check whether these three fields are available in the text elements area.
Please write your code in the subroutine %comp_ldesc.
Repeat the code for your three new fields
perform ldesc(rsaqexce) using 'G00010000X010       00 A1'
    %txt1 %txt2 %txt3 'LFA1-LIFNR' LFA1-LIFNR 'LFA1-LIFNR'.
read table %textpool_langu into %textpool_langu_line
                             with key ID = 'I' key = 'A01'.
if sy-subrc is initial. %txt1 = %textpool_langu_line-entry.
else. %txt1 = %txt_unknown.
endif.
So this subroutine will give you the basic list. Now Program is creating ALV with this basic list. So I think you don't need to worry about that. Please have a thorugh look at the code over this perform, and write accordingly.
I think this is enoogh.
Please update if you got the solution, which will be informative for others.
regards,
Antony Thomas
Edited by: Antony Thomas on Jul 27, 2010 7:57 AM

How can I add a field to a Repeating Frame in the body of a 9i Report

How can I add a field to a Repeating Frame in the body of an Oracle 9i Report whose source is in a higher group?
I want to change an Oracle 9i report. The report has no header or trailer but only a body. The body has the parent frame fields & a repeating frame with four fields, A, B, C & D. They all seem to be in one group. I want to add another field E to the repeating frame whose source is from the 'header'.
I added the field & created a boiler plate & then added the new field, E to the original group A, B, C & D. In the Property Inspector for the field, I pointed the source to the source column in the main query. However, when I run the report, I receive the error "Invalid body size". Some notes on Metalink indicate that this could be due to margins being out of the printable area.
Moreover, after making the changes & after having unsuccessfully run the report, when I try to open the Page Layout for the report, I get no details.
Thanks,

Hi,
i also got same query can u pls tell me elaborately, if u can can u pls send some code.
Thanks & Regards
Jagadeeshwar.B

Add additional field in Vendor master data for VAT Reg. No.?

Add additional field in Vendor master data for VAT Reg. No.?
Hi I need to add one additional field for other VAT Reg. number in vendor master data FK01, We currently have two field
Current Settings:
Country : LFAS-LAND1
VAT registration no.: LFAS-STCEG
I need to add one additional field for text information. Is this possible?
Thanks you very much
Luis G.

If you want to add new fields that are not possible from config (check with your consultant) you need to implement BADIs
In SPRO, go to:
>Logistics-General
->Business Partner
-->Vendors
--->Control
>Adoption of Cusomter's Own Master Data Fields
and read the documentation provided there.
You will need to implement following BAPIs
Processing Master Data Enhancements: VENDOR_ADD_DATA
Customer Subscreens: VENDOR_ADD_DATA_CS
I am not aware of any other way to add new fields to Vendor master (however, check with your consultant for config related screen modifications)
Should you need any further info to implement it, post back (read it thoroughly first, it's quite self-explanatory).
regards,
Aabhas

How to add additional field into output table for RFIDYYWT(Generic Withholding Tax Reporting)

Hi Experts,
How to add additional field into output table VENDORS/WH TAX TYPES AND CODES in RFIDYYWT(Generic Withholding Tax Reporting).
I have no idea how to start with, please give some advice.
Thanks!
Ice

Dear Ice,
Use Append structure, see given link:
https://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eb61446011d189700000e8322d00/content.htm
Regards,
Abbas.

How do you add additional fields in infotypes?i want to leave blank space

how do you add additional fields in infotypes?i want to leave blank space in front of the field?

Hi,
To add new fields go to PM01 and select Enhance Infotype option and then follow the steps in sequence.
I am not getting blank space in front of the field. please elaborate it.
Regards,
Raja.D

Can we add additional fields in work center creation using any user exit ?

Similar Messages

Maybe you are looking for