Can we call an ODI package from another ODI package within same Project?
hi All,
Can we call an ODI package from another ODI package within same Project?
What you can do is get all the interfaces on the old package that you want to be included in the new package. This way, the new package will have the exact code from the old package.Or generate a scenario out of your ("old") package and drag&drop the scenario in the "new" package.
That seems easier to me, because you can re-use the scenario as often as you want.
But you have to take care: If you change your original ("old") package, you have to regenerate the scenario, otherwise the changes do not affect the scenario.
Edited by: h_elmu_t on 02.07.2009 08:50
Similar Messages
-
How can I select to send an from another email account within the inserted gmail account?
How can I select to send an from another email account within the inserted gmail account?
The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
The MAS should use any credits first and then apply the remainder to a listed bank card. -
Can we call Remote Endable Module from another Remote Enabled Moduel
Hii experts...
I have a problem regarding Remote Enabled Module Function Module....
Actually i want to call the standard BAPI 'BAPI_GL_GETGLACCBALANCE' into the BAPI which i hve created...
is it possible???
or can anyone tell me if it is not possible then what is the alternative for this..???'Remote enabled' means that you can also call the function remotely. The 'Remote enabled' characterstic implies some restrictions for the FMs interface, i.e. parameters can not be passed by reference because the remote system has no access to the memory of the called systems where the referenced data are located.
Remote call means only a restriction for the remote call, not for any direct call.
Regards,
Clemens -
Can we call two task flow from another task flow
Hi everyone,
i have a issue. I have a tab(p1),under that tab i have created two tab(p1 and p2).i have to create task flow for p1 and p2 .In both ,p1 and p2, i am doing some operations. then i have to call both the task flow under another task flow(p1).what should be the steps i have to take to do that.
My version is 11.1.1.6
please respond as soon as possible.
Thanks in advance....hi
sorry to say this
i have not much time to play 20-20 chat. please elaborate you usecase. you can get you answer within a post
but we will use router when we have some condition.if you are using router. you should use some "condition" what is that?
but in both the child tab,i just have to fill the form.ok. i hope that you are using af:table in parent TF. in child tab you are using af:form
before commiting or at the time if commiting you should get the data's in af:form. if am right means you should have association/viewlink between those eo's/vo's
if you have means while commiting the parent table iterate over the rows show in child tab - af:form
it will show the both the child panel.go to panettab render poerpty rendered say as condition {yourparenttableiteratoecount ge 0 ? true : false}
or else as you said, make router condition {yourparenttableiteratoecount ge 0} show the child TF.
from the answer you may understood.(just a hope) -
Trying to call a reusable process from a process in the same project
I have one process which has a call activity in it. I'm using this call activity to call a reusable process. When I deploy the workflow, it calls the reusable process just fine but when I open it, I get a 500 error on the screen. I have a data object defined for the main process and a different data object for the reusable process. On the data associations tab for the call activity, i have the data object defined for the main process in the Input going into argument1. On the start event of the reusable process, i have argument1 going into the data object defined for the reusable process. I have tried everything i can think of to make this process work and i keep getting a 500 error when i try to open the screen which was developed using ADF.
I am running SOA and BPM 11.1.1.5 on ECM using 11g databases.
If anyone could provide some help, I would be most appreciative.
Edited by: Elizabeth on Jan 31, 2012 2:56 PM
Edited by: Elizabeth on Feb 1, 2012 5:58 AMThe workflow actually goes to the first node in the reusable process. When I try to open the screen, I get the following error:
Error 500--Internal Server Error
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.5.1 500 Internal Server Error
The server encountered an unexpected condition which prevented it from fulfilling the request.
That leads me to believe it has something to do with the way i'm passing the data into the reusable process. In the Call Activity in the main process, under data associations I feed the data object for the main process into argument1. On the inputs to the reusable process i defined name as argument1 and type as the data object from the main process. On the start node in the reusable process under data associations, I have argument1 being fed into the data object for the reusable process. This seems like the perfectly logical way to do it and how it was explained in some documentation i found. -
Call an Startup-Plug from another WDA
Hello.
How can I call a Startup-Plug from another WDApplication with a table-Parameters.
I get the URL from the Method cl_wd_utilities=>constuct_wd_url.
thanks for helping
Edited by: Marcus Ventur on Dec 2, 2008 11:33 AMHi,
Try to start your secondary application with a URL Parameter,
then fire any plug you want by checking the parameter,
hope it helps,
regards -
How to call a Java class from another java class ??
Hi ..... can somebody plz tell me
How to call a Java Class from another Java Class assuming both in the same Package??
I want to call the entire Java Class (not any specific method only........I want all the functionalities of that class)
Please provide me some slotuions!!
Waiting for some fast replies!!
Regards
Smita MohantyHi Smita,
you just need to create an object of that class,thats it. Then you will be able to execute each and every method.
e.g.
you have developed A.java and B.java, both are in same package.
in implementaion of B.java
class B
A obj = new A();
//to access A's methods
A.method();
// to access A's variable
//either
A.variable= value.
//or
A.setvariable() or A.getvariable() -
How to call a rtf template from another rtf template by passing a value
Hi Gurus,
Its about calling a rtf template from another rtf template by passing a value.
My requirement is like:
I got a quote report from Siebel, based on the product PartNumber I need to pull product description or literature from another database database.
My approach is something like; get a partnumber from quote report pass it to another rtf template which uses the partnumber and get the data from table using DataSource. When user pull a quote report from siebel this new rtf template should attach to the quote at the end.
I've gone through all available blogs about sub-reports and white papers from Oracle they are not much helpful since I need step-by-step.
http://www.adivaconsulting.com/adiva-blog/item/36-working-with-rtf-sub-templates.html
bip-subtemplate-1-132933.pdf
I'm using 10g obiee integrated with Siebel.
Just started learning BIP.
Thanks in advance.
Edited by: 911927 on Apr 2, 2013 8:56 AM
Edited by: 911927 on Apr 2, 2013 8:57 AMHow to call a rtf template from another rtf template by passing a value try in main template create hyperlink of url with parameters for another template
http://bipconsulting.blogspot.ru/2010/02/drill-down-to-detail-or-another-report.html
When user pull a quote report from siebel this new rtf template should attach to the quote at the end.it'll be only another report
IMHO you can not attach it to main. it'll be second independent report
you can try subtemplate but it's not about rtf from rtf by click
it's about call automatically rtf subtemplate from main rtf based on some conditions
for example, main template contain some data and if some condition is true then call subtemplate and place it instead of its condition -
Calling BPM Sub Process from another BPM Process - Stuck at Sub Process
Hi
JDeveloper 11.1.1.6, BPM 11.1.1.6, WLS 10.3.6
I am trying to Call a BPM Process from another BPM Process. Both the processes are defined in the same BPM Project.
Both the Processes have 'None' Start and End activities.
The 'Parent Process' has a 'Call Activity' which calls the 'Sub Process'.
The Sub process takes a parameter of payload object as input and returns output (also same payload object)
I have passed the payload object from parent to sub process in the 'Data Associations'.
The Start and End activities in the sub process also have the data associations set where I am passing the payload object from parent process to child process.
When I run the process and see the Enterprise Manager console - Audit Trail / Flow tabs,
Flow Tab - The progress of the process is showing only till the Calling of the sub process in the Parent Process. It does not show the Sub Process.
Audit Trail Tab - Shows that the Sub Process is called but has not reached to the End of the Sub process.
The audit trail does not have links to the sub process activities.
I cannot see any exceptions as well in the audit trail.
How can I find out why the process is stuck? Or what is going on in the process?
Please let me know if my explanation is not clear?
Thanks for any help
Regards
SameerThanks for replying.
I have another Sub Process with Start and End events as Message Events and used Send Task and Receive Task (Implementation : Process Call) in the Main process to invoke the sub process asynchronously.
Then, the Sub Process is shown in the 'Flow Trace' as child of the main process.
In this particular one, I used 'Call Activity' to call the sub process.
So the Audit trail is showing the sub process as a child.
But what I was trying to say is that the audit trail did not have links to the entries in the 'Event' column (in Enterprice manager - instance window). (like Instance entered activity, Instance left activity etc).
I was intending to use these links to see the payload information and try to debug if there is any problem with the code.
The actual problem I was trying to say in the post is that, even after the user responds to the activity (User Task - Approval) in the Sub process,
the audit trail is not proceeding further.
In the Sub process definition, after the user task, there is End with none implementation.
Hope it is clear now.
Thanks and Regards
Sameer -
Can we call a bdc program from report program
hi
can we call a bdc program from report programYes you can any program from another program using
SUBMIT <repname> statement
SUBMIT <repname> USING SELECTION-SCREEN dynnr.
or
SUBMIT <repname> VIA SELECTION-SCREEN USING SELECTION-SET variant
SUBMIT <repname> VIA SELECTION-SCREEN WITH SELECTION-TABLE rspar
etc.
Regards
Prax -
Calling a BSP application from another
Hello,
I have not a lot experince in bsp's programming.
I am trying to call a bsp applicattion from another one. Do you know how can I do it?.
Thanks in advance. Javier.hi Javier,
For questions on BSP programming,you should post your questions on the bSP forum.
For your question,it depends on how you want to call your BSP application.
Do you want to navigate from one BSP page to other or you want some link which leads to the other BSP application.?
You can find sufficient help on the help.sap.com
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/e9/bb153aab4a0c0ee10000000a114084/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/e9/bb153aab4a0c0ee10000000a114084/frameset.htm</a>
For more details, you can search SDN itself.
IF you have more queries,your'e welcome.
Regards,
Siddhartha -
Calling A Webdynpro Application From Another Webdynpro Application
Hi,
i want to call a webdynpro application from another webdynpro application with sending parameters.
i used this method,
CALL METHOD cl_wd_utilities=>construct_wd_url
EXPORTING
application_name = lv_webapp
IMPORTING
out_absolute_url = lv_url.
CONCATENATE lv_url '?param1=' lv_param INTO lv_url.
data lo_window_manager type ref to if_wd_window_manager.
data lo_api_component type ref to if_wd_component.
data lo_window type ref to if_wd_window.
lo_api_component = wd_comp_controller->wd_get_api( ).
lo_window_manager = lo_api_component->get_window_manager( ).
lo_window = lo_window_manager->CREATE_EXTERNAL_WINDOW(
URL = LV_URL
lo_window->open( ).
but this method shows the parameters on the address bar.
is there a method to send the parameters to another webdynpro application without show the parameters on the address bar?
Can somebody help me pls?
Thanks.I've used a server cookie before. This was built for BSP, but it is really usable anywhere. It just writes the data temporary into the database. This way you can just pass one meaningless URL parameter - like a GUID and use this key to read the data (the server cookie) upon initialization of the new application. I generally serialize all the data that I want into one server cookie by serializing a class. I can then restore whatever attributes of the class that I want on the receiving side.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/bd/4cd23a09313b37e10000000a11405a/frameset.htm -
How to call a Jclient form from another project?
In my workspace, there are three projects. One is for business components. The other two are Jclient forms applications. Can I open a Jclient form from another Jclient form in another project?
I used to create multi_form accounting application using Oracle Form Builder in which I can call a form from another form.Just set one project to be dependant on another in the project settings dialog of the former. This should work.
-
Calling one WAD Report from another WAD Report
Hi All,
I want to Call one WAD report from another WAD Report and I want to show that Report in a Container of the Calling Report Itself. Kindly give the Solution. Thanks for your support in advance.
Thanks & Regards
ShivaHi Shiva,
There is Command called "SET_TEMPLATE" Set Web Template.
Here you can select any of your existing web template and choose to open it in current page of in a new window.
Hope it helps.
Regards,
Pratap Sone -
How sholud we call one jframe class from another jframe class
Hi
In my application i am calling one jframe class from another jframe clas.
how sholud we make previous jframe inactve when another jframe is invoked?(user sholud not able to make any changes on on parent jframe window when another jframe is invoked)
Pls reply.Sorry for me it is not possible to change existing code,
pls suggest me any other solution so that i can inactive parent jframe when child jframe execution is going on.
Maybe you are looking for
-
Exporting table data to a flat file
Hi, I am trying to export data from a table to a text file using this: CREATE TABLE bufurl url, sno ORGANIZATION EXTERNAL TYPE oracle_datadump DEFAULT DIRECTORY dataload LOCATION ('external.txt') AS SELECT url, sno from table1 where sno > 10 but i ge
-
Using Apple TV on a network not connect to the internet.
I am trying to use my apple tv on a network that isn't connected to the internet. It dones't seem to want to allow me to stream my content because iTunes wants to authorize. Is there a way around this? If not is there a way to connect an Airport r
-
I have a 13 inch MacBook Pro (2009). Recently I bought an extended hard drive because I had used up the memory on my iDisk. As I was running the Time Machine back up on my new extended drive, the battery on my Pro ran out causing it to shut down.
-
WLC 7.4.100.0 Downgrade
Hello, Some time ago I updated a WLC, model 2504, from version 7.3 to 7.4.100.0. I also update the FUS (Field Upgrade Software) to the latest release, 1.8.0.0. Now I need to downgrade the WLC back to 7.3 version. My doubt is: Can I just take the norm
-
Can remote developers connect to a CF host
Our LAN has a small server with CF and a SQL Server database and our Flex projects are set to ColdFusion Flash Remoting Service. The server has a fixed IP, but at the moment this is only linked to inetpub. We now have a developer with Flex Builder on