Can we change budget status through project setup system status window?

Hi Experts,
Can we change budget status through project statuses window?
Thanks

Hi
Project statuses window will only deal with the status of the project, not the status of the budget.
Dina

Similar Messages

  • Can in change the status of the batch using any api

    Hi,
    Can i change the status of completed or pending batches into WIP using any API.
    If so could you please let me know the process.
    Regards,
    RR.

    Dear Friend
    Please refer the Document A97388-03 (Oracle Process Manufacturing Process Execution API user guide) in Oracle metalink.
    Wherein you can get all the required information.
    Best regards
    Raj

  • How can I change the status of the fileupload UI from disable to enable?

    Hi, experts,
    The Version of my Netweaver studio is 7.0.11.
    I create a view with fileupload UI element in WebDynpro for Java application, but the fileupload UI element is disabled so that I don't select file when I click the button in the fileupload UI element after I run the application.
    How can I change the status of the fileupload UI element from disable to enable?
    Best regards,
    tao

    Hi
    look at this thread [HI Masters , I need information for file upload program in web dynpro java|HI Masters , I need information for file upload program in web dynpro java]
    and check if u bind each file upload element to binary property in the context

  • In which transaction can I change the status of a field?

    Hi,
    In which transaction can I change the status of a field?
    In transaction FB75 (enter customer credit memo) on the Details TAB, the G/L account is defaulted.
    How can I change this field, so that I can enter a new G/L account?
    Thank you for your feeback.
    Kind regards,
    Linda

    hi Linda,
    this is the reconciliation account of the customer. As another commenter already pointed out, you can change this in the master data of the customer (tcode FD02, Company code data).
    From Release 4.7 (and up) there is another option: in the master data of this G/L account you can set up, if you can change this G/L by posting. This is a checkbox in the G/L master data (tcode FS00). If you tick it, you'll be able to change this reconciliation account it in FB75 (and elswhere by customer postings).
    "I see that in transaction Fd02, the reconc. account is also grey (cannot be changed)."
    You have to check the field status settings in SPRO!
    hope this helps
    ec

  • How can I change the status bar color on Lollipop?

     How can I change the status bar color on Loppipop?I can not find the any menu about this...Now I use the theme creator 0.0.3 BETA.

    Hi, Theme creator 0.0.3 is still not compatible for complete Lollipop features, the next update of theme creator should fix this. I am waiting for this too... Regards,Shreyas.

  • I can't change the picture in the "publish and submit" window.

    I can't change the picture in the "publish and submit" window. It still has the stock "surfer" picture in place. When I try to drag another picture there, it won't stick and I cannot select and delete the "surfer" picture.

    SOLUTION
    All the three steps have to be done.
    Go in Gmail setting, seek the profile picture and change it
    Go into Gmail's Contact, seek your profile name and change the attached picture
    Clear the cache of each installed browser : file cache, cookies AND hosted apps data.
    WARNINGS
    Do NOT authorize Yosemite (during install) or Safari (after install) or any Apple applications to connect to your Google account(s) without knowing the consequences.
    Apple will NOT warn or explain you the action it will take over your Google accounts and profiles. Apple will not proceed like Gravatar or applications installed from Google Marketplace (those are obliged to warn you and ask you for authorizations with details description of the actions involved if you install an app)
    CRITICS on OSX 10.9 and 10.10
    OSX  is highly invasive in regards of Google products (not with others so far and after investigation)
    OSX takes your private and local data (profile here) and force it to be public (here by modifying your Google profile). ### Think twice if you have personal information or picture on your local computer (i.e. on your local profile) you do not want to share online ###. Apple will disregarded your private life without warning.

  • How can u change the desktop and taskbar to a classic windows view

    how can u change the desktop and taskbar to a classic windows view in 8.1

    Hi,
    If you mean to customize the desktop, you can use themes, desktop backgrounds, window colors, and screen savers to personalize your desktop.   
    If you want some free themes and desktop backgrounds to use, there are lots to choose from in the
    Personalization Gallery.
    To learn more about personalizing the desktop, see
    Get started with themes.
    Best regards
    Michael Shao
    TechNet Community Support

  • How can I change the status of refund order to complete from CRMD_ORDER?

    I can I manually (Force) change the status of a refund order from within CRMD_ORDER?.
    Jason

    When doing that from the order's Status screen against User status I only get the dropdown status of 'Request Payment' that can be set. Hence the reason for thinking that there's more to do to correct this problem.
    Jas

  • Can we change package of the project

    Hello Everybody,
    I have developed one Webdynpro application using JDI. I have specified some pacakge name for all components and views. But, now i want to change the package name for all the components and views. Can I change it?
    If yes then how can we do that?
    Like: Initially I have given package name as: com.xxx
    But, now I want this package name as com.yyy.
    Is it possible?
    Thanks in advance,
    Bhavik

    Hello Bhavik,
    Yes it's possible. In the Web Dynpro Explorer, right-click on an object and select "Rename". You can then enter a new package name for all your objects (Components, Views... ). For models you need to delete and create them again, unless there's a way to rename them that I'm not aware of.
    You might have a few errors after that, just go into the implementation of the objects with errors and change the package names there. Do not rename the packages in the source files.
    Regards,
    Olivier

  • Windows BUG: Can't change file types through control panel Quicktime settings

    I am running the latest version of Quicktime on Viista Home Premium 64-bit.
    When I into Control Panel -> View 32-bit Control Panel Items -> Quicktime -> Browser, and I click on "File Types" or "MIME Settings", I get a blank page that looks like this: http://oi40.tinypic.com/hvbbia.jpg, and Quicktime momentarily freezes.
    I have no issue adjusting file type settings when bringing up Quicktime outside of control panel, or when using "Default Programs" within control panel, it's only when I do it within "View 32-bit Control Panel Items" that it does this.
    This is a minor bug but still weird. Can anyone else verify the issue? I tried uninstalling and reinstalling but that didn't help.

    This could be caused by damaged QuickTime preference files (or possibly a permissions problem on the preferences files).
    We can try rebuilding one set of your preference files to see if that helps with the greyed-out stuff.
    First, quit QuickTime if you have it open.
    Next, you'll need to make sure you are set up to view hidden files and folders in Vista (or 7).
    1. From the Start menu, click Open.
    2. In the Organize menu, click Folder and Search Options.
    3. Click the View tab.
    4. In the "Advanced settings" pane under "Hidden files and folders" make sure that the "Show hidden files and folders" option is selected.
    5. Click OK.
    Next, you'll remove the QuickTime preference folder (and contained file).
    6. In Computer, open Local Disk: C or whichever drive your documents are stored on.
    7. Open the Users folder.
    8. Open the folder with the name of the Windows 7 user account in which the QuickTime file types are "greyed out".
    9. Open the AppData folder.
    10. Open the Local folder.
    11. Open the Apple Computer folder.
    12. Drag the QuickTime folder out onto the Desktop.
    Now you'll rebuild the preference folder and file.
    13. Launch QuickTime. Check your file types again.
    Are they still greyed out, or can you change them now?

  • Can you change the default size of the Clip Monitor window in PE 13?

    Can someone please confirm whether it is possible to change the default size of the clip monitor window in Premiere Elements 13. Searching this question brings up a reply to someone who asked the same question about PE 7; the answer then was to open the clip monitor window, adjust its size and then leave it open for the duration of the editing session. Is this still valid for PE 13, or is there some other way of adjusting the default size of the window so that the next session opens at the same size as the last one? Help appreciated.
    CD.

    Major Sparky
    Just a supplemental observations
    There are certain actions even in the project that remains open that will close the opened, sized, and positioned Project Window.
    Also
    1. If you go to dual monitor system, typically the program does not remember the dual monitor setup when the project is saved closed and reopened.
    2. If you use the project without a dual monitor system and save close project with the Preview Window open, sized, and positioned, when you re-open the project, the Preview Window is gone and would need to be reopened, sized, and positioned again.
    ATR

  • Can't change MAC address of my wireless card on Windows XP

    Dear Forum Members,
    I have recently bought a notebook, Lenovo IdeaPad G550L (I haven't found section for the G series here on the forum) and would like to use its WiFi adapter (BCM4310 according to Everest) with explicitly changed MAC address. I installed the recommended driver, available from Lenovo's website, version 5.10.38.14. I tried the common way to change the MAC address, went to Control Panel -> Network Interfaces -> Broadcom Wireless Network Adapter -> Configure... -> Advanced -> Locally administered MAC address, and changed it to a different address (without ":" or any separator characters). Unfortunately this common solution won't work at all. Although, no error messages are produced when changing it (so it seems successful) my wireless router shows me the original MAC address of my integrated wifi card. Tried to restart my computer, my router, everything.
    * Tried different drivers, downloaded a driver from HP which had a separate wireless configurator, Broadcom Wireless Utility. It worked like the driver from Lenovo (except this one hasn't got the utility), but I was still unable to change my MAC address.
    * Tried a different driver from SoftPedia, version 5.10.79.14 (this is newer than Lenovo's), it didn't work either.
    * Tried Nathan True's MACShift utility. It seemed to change the MAC address, but my router showed the original, so it didn't.
    * Tried to look for official Broadcom drivers on www.broadcom.com but found nothing for BCM4310.
    * Finally, I booted my alternative OS, the latest Ubuntu Linux, and used the kernel driver b43 for my wireless adapter. I tried to change my MAC address using the command ifconfig wlan0 hw ether .... and connected to my network. It worked, my router showed the changed MAC so the hardware (or the firmware) is capable of doing this by the right driver/firmware.
    I tried to address Broadcom with the issue, sent them a letter like this post they replied that they are not competent, they wrote the following (I guess this was an automatically generated message because it got back in 10 seconds ) from [email protected]:
    "As the chipset supplier, Broadcom provides driver support to our customers - the manufacturers of wireless devices - that ultimately provide products to end customers, such as wireless LAN vendors, cable modem vendors, and notebook providers. It is up to these manufacturers to provide product-specific drivers and software support to their end customers. Please contact the manufacturer of your wireless device for their current drivers"
    Then I addressed Lenovo with the problem, their answer:
    "Dear ******,
    Thank you for contacting Lenovo, the makers of ThinkPad and ThinkCentre products. As I understand, you have purchased a Lenovo IdeaPad G550L and would like to use its WiFi adapter (BCM4310 according to Everest) with explicitly change MAC address.and you would like to know is there an official driver for Windows XP that allows you this basic feature like b43 in Linux. We apologize,Please do speak with our Idea pad technical Team at 877-453-6686 Option 1-2-1-2 for further assistance.
    If you have further questions or concerns, please feel free to contact us at 866-42-THINK (84465) option number 2. We will be happy to assist at that time.
    Once again, thank you for contacting Lenovo.
    Sincerely,
    Lenovo Websales/CustServe"
    So this means I should call them and spend extra money for phone bill of international calls because of their fault of providing a basic feature that is to be expected from every single wireless card in the market. Should I believe that a guide over the phone is more efficient than a step-by-step solution or a link to an alternative driver? I'm getting kind of disappointed. At least they have understood (or copy-pasted) my problem, dutch comfort though.
    Any ideas? Anyone experienced the same problem and solved it? Is there an official (or even unofficial) driver for this device for Windows XP that allows me this basic feature (like b43 in Linux)?
    Thanks in advance,
    str4ngS

    Yes, I have posted this thread to different forums after I realized that Lenovo "customer care" is not likely to help me out and even wirelessforums.org members couldn't come up with any ideas for days, that's why. I have already written that helper applications like SMAC (or etherchange or macshift) don't work, because they do the same thing in the system as I change it in the driver panel, so they use the same method which simply does not work.
    Locked? Definitely not. If yes, why can I change the MAC of my adapter under Ubuntu Linux using b43 open-source driver if it's really locked? Or you mean it's locked from software, because Lenovo or Broadcom didn't want their users to change their MACs or they just forgot to release a fully-functional driver? Well, then I would like to have a driver in which it's not locked, because this is a basic feature of my adapter of which the hardware is capable.
    I have already contacted Broadcom, see their (automatically-generated) answer in my initial post, but I will try to do that again with more foresight.

  • Can i change depreciation and prorate calendar in book controls window?????

    Hi all
    I am using FA module.
    I tried to find this on documentation but i did find it. I want to be sure if i can change the depreciation and prorate calendar on book controls window??
    If it is possible to change this information, please tell me how can i do this or if there is any profile option for this purpose.
    Thank you and best regards
    Ernest

    You can't change depreciation and prorate calendar on the book level, this way isn't supported and I think a hard coded update dosn't works.
    If you will change these, you must implemented a new asset book and migrate the existing data into this book

  • Can I change Address Book's default setup?

    I want to import my entire address book database from Palm Desktop to Apple Address Book (only about 5,000 entries in total).
    I have several fields in the Palm Desktop database that don't match the Address Book default setup. In Address Book, I went to Card> Add Field> Edit Template but the changes I made there to the Template didn't actually seem to change anything in the actual Address Book display of addresses, even though I made several changes in the Edit Template function - it was as though the changes I made in the template editing function had no effect at all. The changes I made are still there when I revisit the Edit Template function but the additions and alterations don't show in the final address display.
    1. Where did my changes to that Template go in respect to the actual display of the addresses?
    2. Is there some way to apply my edited template to all the entries in Address Book in one fell swoop?
    3. If not, then why have the Edit Template function at all?
    I've done some trial runs using a tab-delimited file exported from Palm Desktop, which Address Book seems to import and work with happily... except for this inability to choose my edited template for the new entries - Address Book forces the new database into Address Book's own Template with none of my chosen changes. It's as though the template edit function is just for show but with no real functionality.
    I hope this is all making sense...
    This is an great time for me to make sweeping changes if necessary (if it is possible or if it helps) since I'm beginning a totally new database in Address Book from scratch.
    Many thanks for any help.

    Paul,
    I'm afraid you will loose some of your data that you can insert in your Palm when you transfer to AddressBook, but you can try to get in as much as possible. Especially the custom fields are much more flexible in Palm.
    But in the end, the full integration of AB in your Mail and Calender, backup to .Mac etc. may offset these drawbacks.
    When you set up a template, did you actually complete one address record?
    If not, you should.
    When you want to import to AB from a tab-delimited file, try this program
    Addressbook Importer, an excellent piece of freeware that will do this for you.
    In the top row before you import, make sure you have an address record that has all your customized fields completed in a way you know which field that is (you can do this in Palm, using the name A. AAA, address etc.)
    Now when you use the importer, you can make sure wich field goes where.
    Backup your Palm data well before you start experimenting. I wouldn't want to be the cause of you dropping 5000 records. Also, disable all syncing when you start. Once it works, make a backup from within the AB application. Then when all looks OK, you can start syncing using iSync instead of Hotsync.

  • Metadata template created in Bridge can't change "Copyright Status" property

    If I create a metadata template in Bridge CS4, select Copyright Status and set it to Copyrighted,
    any other metadata changes in the template will be applied, but "Copyright Status won't change.
    I can't even manually set the Copyright Status from within Bridge.  If I try, I get an error message,
    "This property cannot be modified."
    Here's the workaround — create the template in Photoshop or Illustrator, not Bridge.
    Open one of the images in Photoshop or Illustrator, select File Info, enter the metadata,
    and select Export.  The resulting template will be available in Bridge,
    and it can change the Copyright Status.
    A fix for this in the next incarnation of Bridge would be greatly appreciated.

    As with almost all my problems, there is apparently no solution, so I am going to try reinstalling photoshop. So can someone at least tell me what is likely to be overwritten so that I can protect it.  And where they are stored? EG Web Gallery templates?  Keywords?

Maybe you are looking for