Can we connect one DATASYNC server to two postoffices ?

Hi there,
We have 2 postoffices, one MTA, one GWIA (NetWare based) and one Datasync server. The GWIA handles 2 internet domains, the second domain is routed the second postoffice through a vpn tunnel to another location.
The first PO services a number of users and this all works fine. Now members of the of the second postoffice also want their devices to be synchronyzed.
Question is: can we create a second trusted soap connection from the one Datasyncserver we have? Or should we put a second datasync server on the remote location. This would best from a performance point view ofcoarse but, as we have only a few users on the second location, can it be done with one datasync server? Has anyone ever tried this?
Thanks in advance!
Eric Loderichs

I have 22 different domains and they are all handled by one datasync server...try it and see. Make sure if there are any firewalls in the mix that it will pass the traffic...
--El
Originally Posted by eloderichs
Hi there,
We have 2 postoffices, one MTA, one GWIA (NetWare based) and one Datasync server. The GWIA handles 2 internet domains, the second domain is routed the second postoffice through a vpn tunnel to another location.
The first PO services a number of users and this all works fine. Now members of the of the second postoffice also want their devices to be synchronyzed.
Question is: can we create a second trusted soap connection from the one Datasyncserver we have? Or should we put a second datasync server on the remote location. This would best from a performance point view ofcoarse but, as we have only a few users on the second location, can it be done with one datasync server? Has anyone ever tried this?
Thanks in advance!
Eric Loderichs

Similar Messages

Can we connect one R/3 to two BW systems and extract data?

Can we connect one R/3 to two BW systems and extract data succesfully ? kindly through light on this issue.
Thanks and regards.
Ankush Shejul

Of course you can.
Just have to have the RFC destinations in place and use the
CALL FUNCTION '....' DESTINATION '....'
commands in ABAP, check out the ABAP forums for more info.

Connect one Business system with two Integration Server

Hello,
Can we able to connect one Business System with two Integration Server?
I have one Business system (ECC 6.0 with the client 900) and it is already connected with PI 7.0 system.Can I able to connect the same sytem (with same client) with PI7.1?
I want to do the HTTP Connection for ABAP Proxy for this two XI system with one business Sytem ?
Is this possible ?Is there any work around solution there?
Thanks.

Hello ,
This document describes about connecting with Two PI7.1 system using Application Server 7.1 and Application Server 7.0 SP14 .
I want to connect same ECC system via abap proxy with two different PI system .One is PI7.0 and another one is PI7.1 system.
Is this possible if i use Application Server 7.1 or Application Server 7.0 SP14 ?
Thanks.
Lakshmi
Edited by: Muthulakshmi Pandi on Apr 16, 2009 11:48 PM
Edited by: Muthulakshmi Pandi on Apr 17, 2009 12:21 AM

Database error #2002 can not connect local mysql server to socket through '/var/run/mysqld/mysqld.sock'(2) on mac os x 10.9.2

Dear Fellas:
I received "database error #2002 can not connect local mysql server to socket through '/var/run/mysqld/mysqld.sock'(2)" on mac os x 10.9.2.
mysql info:
ps -ef | grep mysql
    0    66     1   0 11:06AM ??         0:00.04 /bin/sh /usr/local/mysql/bin/mysqld_safe --user=mysql
   74   225    66   0 11:06AM ??         0:02.50 /usr/local/mysql/bin/mysqld --basedir=/usr/local/mysql --datadir=/usr/local/mysql/data --plugin-dir=/usr/local/mysql/lib/plugin --user=mysql --log-error=/usr/local/mysql/data/Chuans-MacBook-Pro-2.local.err --pid-file=/usr/local/mysql/data/Chuans-MacBook-Pro-2.local.pid --socket=/var/run/mysqld/mysqld.sock
501   952   947   0 3:52PM ttys000    0:00.00 grep mysql
Please help!!

Fascinated and guessing:
Something related to sock(2) because that's not part of your copied info. I'm thinking you've doubled up on sockets and the second socket doesn't exist, meaning you should be connecting to the first socket "mysqld.sock" whether automatic or not.
I've only used GUI tools on purpose, so does this mean you've already got MySQL running and you tried to launch it again manually? Perhaps you already have one instance of a db and you're trying to launch a second instance, and the two can't coexist with a single user local db?
Assuming this is all local, I'd shut down the db service and restart it, out of hand. I've seen similar messages when I set the db to start up on boot, and it didn't finish shutting down when I tried to restart it manually. Usually the GUI won't let me turn it on because it reports it's already running, but in that case it hadn't finished performing what the GUI was reporting.
Just speculating.

Lync 2010 Mobile client can't connect to the server. it may be busy or temporarily unavailable

I have the following issue after renewed the Lync internal and external certificates, Lync Mobile client get the following message when try to connect from internal or external network "can't connect to the server. it may be busy or temporarily
unavailable"
PS I tried a lot of solutions from different articles, but the same result.
presented below my environment:
Two Lync 2010 frontend servers with one pool.
Two edges server.
HW load balancer.
Log from Lync connectivity analyzer.
User Name: [email protected]
Logging test parameters:
SIP Uri: [email protected]
Discovery Type: Automatic Discovery
Network access: NetworkAccessExternal
Selected client: ApplicationLyncMobile2010
Starting Lync server autodiscovery
Please wait; this test may take several minutes to complete...
Starting automatic discovery for secure (HTTPS) internal channel
Sending HTTP request to
https://lyncdiscoverinternal.xxx.com/[email protected]
Exception encountered while sending an HTTP request to
https://lyncdiscoverinternal.xxx.com/[email protected]: An error occurred while sending the request.. Complete Exception: \r\nSystem.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to
connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:443
   at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
   at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
   --- End of inner exception stack trace ---
   at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
   at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
   --- End of inner exception stack trace ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
An error occurred while sending the request.
Unable to connect to the remote server
An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:443
For troubleshooting, try using a browser to open the server discovery URL
https://lyncdiscoverinternal.xxx.com/[email protected]
System.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden
by its access permissions 192.168.89.25:443
   at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
   at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
   --- End of inner exception stack trace ---
   at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
   at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
   --- End of inner exception stack trace ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendRequest>d__d.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<TryNextUrl>d__3.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<StartDiscoveryJourney>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at LyncConnectivityAnalyzerCore.Utilities.<RetrieveUserLocation>d__3e.MoveNext()
Server discovery failed for secured internal channel against
https://lyncdiscoverinternal.xxx.com/
Starting automatic discovery for unsecure (HTTP) internal channel
Sending HTTP request to
http://lyncdiscoverinternal.xxx.com/[email protected]
Exception encountered while sending an HTTP request to
http://lyncdiscoverinternal.xxx.com/[email protected]: An error occurred while sending the request.. Complete Exception: \r\nSystem.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to
connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:80
   at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
   at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
   --- End of inner exception stack trace ---
   at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
   at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
   --- End of inner exception stack trace ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
An error occurred while sending the request.
Unable to connect to the remote server
An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:80
For troubleshooting, try using a browser to open the server discovery URL
http://lyncdiscoverinternal.xxx.com/[email protected]
System.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden
by its access permissions 192.168.89.25:80
   at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
   at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
   --- End of inner exception stack trace ---
   at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
   at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
   --- End of inner exception stack trace ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendRequest>d__d.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<TryNextUrl>d__3.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<StartDiscoveryJourney>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at LyncConnectivityAnalyzerCore.Utilities.<RetrieveUserLocation>d__3e.MoveNext()
Server discovery failed for unsecured internal channel against
http://lyncdiscoverinternal.xxx.com/
Starting automatic discovery for secure (HTTPS) external channel
Sending HTTP request to
https://lyncdiscover.xxx.com/[email protected]
Exception encountered while sending an HTTP request to
https://lyncdiscover.xxx.com/[email protected]: An error occurred while sending the request.. Complete Exception: \r\nSystem.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect
to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:443
   at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
   at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
   --- End of inner exception stack trace ---
   at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
   at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
   --- End of inner exception stack trace ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
An error occurred while sending the request.
Unable to connect to the remote server
An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:443
For troubleshooting, try using a browser to open the server discovery URL
https://lyncdiscover.xxx.com/[email protected]
System.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden
by its access permissions 192.168.89.25:443
   at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
   at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
   --- End of inner exception stack trace ---
   at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
   at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
   --- End of inner exception stack trace ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendRequest>d__d.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<TryNextUrl>d__3.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<StartDiscoveryJourney>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at LyncConnectivityAnalyzerCore.Utilities.<RetrieveUserLocation>d__3e.MoveNext()
Server discovery failed for secured external channel against
https://lyncdiscover.xxx.com/
Starting automatic discovery for unsecure (HTTP) external channel
Sending HTTP request to
http://lyncdiscover.xxx.com/[email protected]
Exception encountered while sending an HTTP request to
http://lyncdiscover.xxx.com/[email protected]: An error occurred while sending the request.. Complete Exception: \r\nSystem.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect
to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:80
   at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
   at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
   --- End of inner exception stack trace ---
   at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
   at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
   --- End of inner exception stack trace ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
An error occurred while sending the request.
Unable to connect to the remote server
An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:80
For troubleshooting, try using a browser to open the server discovery URL
http://lyncdiscover.xxx.com/[email protected]
System.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden
by its access permissions 192.168.89.25:80
   at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
   at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
   --- End of inner exception stack trace ---
   at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
   at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
   --- End of inner exception stack trace ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendRequest>d__d.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<TryNextUrl>d__3.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<StartDiscoveryJourney>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at LyncConnectivityAnalyzerCore.Utilities.<RetrieveUserLocation>d__3e.MoveNext()
Server discovery failed for unsecured external channel against
http://lyncdiscover.xxx.com/
None, AutoInternalSecureD, AutoInternalUnsecureD, AutoExternalSecureD, AutoExternalUnsecureD, ManualDNSFail, ManualSecureD, ManualUnsecureD, AuthBrokerInternalLMXCheckGET, AuthBrokerInternalLMXCheckPOST, AuthBrokerExternalLMXCheckGET, AuthBrokerExternalLMXCheckPOST,
MobilityMCXInternalLMXCheckGET, MobilityMCXInternalLMXCheckPOST, MobilityMCXExternalLMXCheckGET, MobilityMCXExternalLMXCheckPOST, LMXSIPServerInternalDNS, LMXSIPServerExternalDNS, MobilityUCWAInternalCheckPOST, MobilityUCWAExternalCheckPOST
Automatic discovery of the Lync server failed. Please verify the server requirements at
http://go.microsoft.com/fwlink/?LinkId=278998 . Lync mobile apps do not require automatic discovery. You could enter the server FQDN manually and test connectivity again.
Microsoft Lync Connectivity Analyzer cannot analyze deployment readiness until a discovery test has completed successfully.

Hi
Is that Port 443 opened? check the fire wall.
is that external Lync clients are logging in with out any issues.
by seeing the Log it is unable to connect on port 443
Unable to connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made
to access a socket in a way forbidden by its access permissions 192.168.89.25:443
For troubleshooting the Mobility issues follows this
http://blogs.technet.com/b/nexthop/archive/2012/02/21/troubleshooting-external-lync-mobility-connectivity-issues-step-by-step.aspx
Whenever you see a helpful reply, click on Vote As Helpful & click on Mark As Answer if a post answers your question.

Can't connect to the server

my apple TV second generation can not connect to the Itunes store. I keep getting a message saying. Apple TV can't Connect to the server at this time. Please try later. Is it on my end or is there an issue on Apples side? I can see previews and such but can not buy or rent anything

I have four Apple TV's in my home, and I get this message all the time. What is intersting, is when it occurs on one,it occurs on ALL four simultaneously. We also have two iMacs, two iPads, and three iPhones, all use the same apple I'd and password, those other devices connect to iTunes just fine when this occurs with the TV's. I too can also watch previews, use Netflix, etc.
It is clearly a gremlin specific to iTunes and Apple TV's, and your account. Re booting the TV does work.
I am forever rebooting Apple TV's, as well as forever returning them for free replacements as they experience a variety of problems, locked screens, failure to pair with a remote, etc.
Apple knows the fix for this is a reboot, so why is that not an express lane answer??
Very frustrating devices, ITunes does have the best content, and the highest prices. But I suggest use your apple tv for watching Netflix at $8 / month rather than $5 / movie. Especially when they do not seem to care enough to fix bugs like this so we can enjoy the pleasure of overspending for their content without extreme frustration.
Imagine three kids with Apple TV's in their room. (we do not have cable). A thousand "Dad, can you come fix my Apple TV again".
Signed, the 24 hour on call IT man because I was stupid enough to invest in so much apple product.
Bottom line? Anytime anything goes wrong with your Apple TV, it's not you as long as you have Internet, it's Apple, reboot when in doubt, or unplug and replug, even better.

Can I connect another FMIS server to LCCS?

I understand that recording streams in LCCS is currently in private beta, however I have a client who wants recording plud screen share. I know that I can connect one FMS server as a client to another.
So my question: Is the correct RTMP url exposed in LCCS such that I could connect my own FMS server as a client to perform recoreding of a screenshare published via LCCS?
Many Thanks
Matt

Well, I don't think you can do it. While in theory the rtmp URL is there, it's dynamic (we assign the FMS with the lowest load to new rooms, and if something fails we restart the room on a different FMS).
Also, you would need to emulate the Flash client in order to gain access to the room resources (otherwise you will either not have permissions to access the streams or you'll have two clients trying to connect with the same authentication tokens and we may shutdown one of them.
Also, unless you force the client to connect via rtmps (or you use the Player 9 SDK) you will get an "rtmfp" URL, that you will not be able to use unless you are planning of running FMS 4.
Did you try our recording ? If you did, did you have any problem with it ? And if not, send us a private email with a brief description of what your application is and we can get you going.

Snow Leopard: can't connect to AFP server anymore

We are using the MacServerIP (9.0) AFP server on a windows 2003 server. After updating from 10.5 to 10.6 we can not connect to this server using AFP anymore (connection failed). Connecting via SMB works fine.
Thank you very much!!

I have the same problem logging in to an old Snap Server via AFP. "you entered an invalid username or password." is the error message. All was well in OS9 through 1.4 but this broke on 10.6 upgrade fro 10.4.
Apple support has not solved the problem. One thing I noticed is in the login dialog box there is no longer a list of options like there was in all versions up through 10.4, like sending password in clear text.
It is clear, that the two computers see each other given that the request for name and password come up for the target server.

RF's can't connecting to terminal server.

Hello,
I having trouble with my new terminal server. I am using RF's (intermec & motorola) in my business and We have two terminal servers that is running with 2008r2 standard. RF's can connect to first terminal server unproblematic but can't connect
to other one and getting error as "Because of a security error, the client could not connect to the remote computer, verify that you are logged on the
network, and then try connecting again"
I can connect to all terminal servers with my domain computer via remote desktop connection.
Own enterprise network has PEAP-WPA2 user authentication
Rf's are not in the domain.
I need help from you.
Thanks.

Hello everyone,
We found a solution regarding this case with microsoft team. Solution is in the following.
Issue Statement:
Cannot connect RF scanner to a particular server using RDP.
Symptoms:
> The RF scanners are Intermec CK3R devices with windows embedded handheld 6.5 classic installed on them. They fail to connect to
a particular server using RDP. However, same user and device can successfully connect to another server. The server to which the device fails to connect is TRKKTA01-N.
> Never been able to connect to the problem server.
> Both the good and the bad server are Windows 2008 R2.
> The Devices are connecting using per user licenses.
> We can connect to the problem server using a Fat client like Windows 7 machine with the same user ID.
> both the Problem server and the working server are in the same network but on different VLANs.
> On the Scanner, when trying to RDP user gets the following error:
"Because of a security error, the client could not connect to the remote computer, verify that you are logged on the network, and
then try connecting again"
> Already different encryptions have been tried but the connection still fails.
Environment:
RDS server is Windows 2008 R2. Clients are Intermec CK3R devices and OS is Windows embedded handheld 6.5 classic.
Scope Agreement:
We will close the case once we find the cause of the RDP failure and provide a possible fix for it.
If the problem is found to be due to third-party code we will provide information to substantiate this.
Case Status: Resolved.
Steps used to resolve the issue were:
1. Create the following reg key on the license server:
Use512LenPropCert on the Server
Subkey: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\RCM
Registry entry: Use512LenPropCert
Data type: REG_DWORD
Value: 1
2. De-activate the license server
3. Re-activate the server using the telephone method
4. Delete the x509 cert keys from the terminal servers
Best Regards,
Ufuk BAYGIN

Pap2t - Can't connect to login server

Hello,
I bought a linksys pap2t unlocked version in india. I have been trying to setup gizmo project using the instruction given by gizmoproject but I always get the below error message:
Display Name: User ID: 17471730102
Hook State: On Registration State: Can't connect to login server
Last Registration At: 0/0/0 00:00:00 Next Registration In: 24 s
Message Waiting: No Call Back Active: No
Also
SIP Messages Sent: 96 SIP Bytes Sent: 38408
SIP Messages Recv: 0 SIP Bytes Recv: 0
External IP: 59.92.61.69
My DNS configuration (as listed in the configuration page)
DHCP: Disabled Current IP: 192.168.1.2
Host Name: LinksysPAP Domain:
Current Netmask: 255.255.255.0 Current Gateway: 192.168.1.1
Primary DNS: 192.168.1.1
Secondary DNS: 61.1.96.71
The primary DNS is my router and the secondary is that of my ISP. I have also tried specifying no DNS. The network configuration at my place is PAP2T -> Wirless Router (Netgear) -> ADSL Modem -> Internet.
The SIP message received and SIP bytes received are always at zero. On my router (Netgear WGR614v7) i have tried setting up port forwarding:
# Service Name Start Port End Port Server IP Address
2 Gizmo 5060 5060 192.168.1.2
3 stun 3478 3478 192.168.1.2
I have tried with both NAT on/off. I am at my wit's end!! Please help me out. Please do let me know if you need any further data on my configuration..
Please Please help me out - quite frustrated now after two days of tinkering with the configuration pages. I have also tried with voipstunt.com account - same problems persist - i think it is more of a network issue than that of the voip service provider.
Thanks a lot
Ashwin

I have had exactly the same problem with a PAP2NA, the solution for me was to reset and configure both lines the same, i.e. configure line one and line two with the setup given by your Voip provider. Hope this help
golfgolfo

Safari can't connect to the server - still causing problems

Hi
I have read through several topics relating to this problem - but have yet to be able to resolve the issue. So apologies in advance if it has already been answered in one of the many threads.
I have 2 computers both working off the same broadband hub connection.
Both have the same version of the OS and the same version of Safari: OS 10.4.11 and Safari 4.0.4
I have checked that the network settings are the same and all parental control settings are the same.
The laptop will access sites that the desktop will not.
Can anyone shed some light as to why numerous sites I try to access on the iMac result in a Safari message "Safari can’t connect to the server".
Same applies when I attempt the same sites with Firefox.
I have emptied caches, resolved all font issues, addressed terminal and plists etc. etc. - all to no avail.
Help!!!

Adding Open DNS codes to your Network Preferences, should give good results in terms of speed-up as well as added security:
If you are using a single computer: Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu, and in the box marked 'DNS Servers' add the following two numbers:
208.67.222.222
208.67.220.220
(You can also enter them if you click on Advanced and then DNS)
Sometimes reversing the order of the DNS numbers can be beneficial in cases where there is a long delay before web pages start to load, and then suddenly load at normal speed:
http://support.apple.com/kb/TS2296
If your computer is part of a network: please refer to this page: http://www.opendns.com/start/bestpractices/#yournetwork and follow the advice given.
You could also try these codes as well: 4.2.2.1 & 4.2.2.2
If you use a Router, make sure it has the latest firmware installed.

Connecting One process Server to Multiple SAP Systems

Hi Experts,
We have a licensed version of the SAP CPS with the Process server limit parameter set to 4, which means we are limited to 4 process server as per my understanding. But when we create a SAP system the process server and the respective Queue is automatically created. SO that means we can create a max number of 4 SAP systems with 4 process servers!!
Or is there a way we can connect one process server with multiple SAP systems ?
Thanks,
Eric.

Yes - Process server limit parameter set to 4 means your CPS environment can start jobs in 4 SAP systems only.
Maybe "SAP Business Automation Enabler (BAE) Connectors" could be useful to you in your situation.
- Check the CPS admin guide for more information on BAE connector.
Regards,
David

Problem with Safari **Safari can't connect to the server**

My internet is working fine, but I keep having to refresh the page because I'm always getting "safari can't connect to the server". Same thing happens with different browsers. I've read a couple things online and unistalled everything that I think is causing the problem but it's still happening frequently. Any help would be greatly appreciated!

Most school networks are closed networks. You can access their Intranet, with all the files and peripherals and everything, but you need to have a specific password or IP address to access any outside connection. I have an ibook G4 that's 3 years old. I used it in high-school to access AOL wirelessly. That was before closed and protected networks were prefered. It shouldn't matter if the school intranet is widows based or not. You need to access your own internet service sometimes in order to get any reaction. If you simply use safari, you might only be connecting to the schools intranet, which only links together the schools computers and keeps the system isolated. Also, you need to check your firewall settings, in fact, just turn off the firewall. The schools sytem is firewalled up the bum and you shouldn't get attacks anyway because you're running the mac os.
You might also try an alternative approach. Go into a computer lab, access one of the systems, then go to control panels and look up every connection you can find. Take down all of the info and then see which matches up with similar info on your mac. Then go to another pc and look up the same info again. Is it different? How? Then take that listing to the system administrator and show them. They may not know that a mac has a simpler interface than the pc, so you may have to do some prodding to get them to take a look. If they still tell you it wont work, you could try boot-camp or a virtualizer (to let you run windows alongside the mac os). If you use a virtualizer, you can get your own copy of windows and then share it's connection to the main system to the mac.

Can't connect to integration server

hi everybody!
i can't connect to integration server.
the connection to app server is ok but connection to bpel process manager and ESB failed.
still i'm not the one how make the installation (on HP-UX), i don't know the port number required for establishing the connection to the integration server. i've tried the default one 9700 and it doesn't work.
does anyone know where i can find this port number?

thanks for your replys but still have the same problem.
i looked to the readme file the only port that i found was 7778.
here are more details on connection test:
TestName | Result | Details
Application Server Test | passed |
BPEL Identity Service | failed | java.io.FileNotFoundException: http://hostname:7778/integration/services/testconnection/BPELConnection
BPEL Domains | not run | not executed
BPEL Server Mode | not run | not executed
BPEL Notification Service | not run | not executed
BPEL Task Manager Service | not run | not executed
ESB Connection | failed | could not establish the connection
when i try to connect to the bpel console every thing is ok, and the comand 'opmnctl status ' says that everything is alive.
any suggestions?

Can't connect to a server? Error message

Hi, I have what I believe to be a strange problem. My internet service seems to be fine except I can't connect to any pages related to my internet service provider. I have no problems connecting to any other site page. When i try to connect to my providers home page or webmail service, I get an error:
can't open page because can't connect to the server www.9online.fr
How is it possible that this is the only page that does not work, and, it's my provider? Called them, they say there is no problem on their end, and that they can connect on a mac. Is it possible to block only one page? Was it something I might have done? And, is there a fix.
Many thanks,
M

I ran into a problem with my provider's personal web space. Basically, all I can see now is HTML code instead of the graphics I loaded over a year ago. I tried it from a PC on my LAN and it works fine. I can only assume that a OS X update did me in.
Are you by any chance using Verizon? That's where my problem lies.

Can we connect one DATASYNC server to two postoffices ?

Similar Messages

Maybe you are looking for