Can we create the Purchase order that using P&L account or just using account do not use cost center.

Dear Experts,
Could you please advise :
1) Can we create the purchase order that using profit and loss account ? ( if yes , which kind of account assignment category we should use ?)
2) How to create a purchase order for service charge .( just using GL account )
Thanks & Best Regards,
Watson

Hi,
   May I know why you do not use cost center for consumption?
   You may create a new account assignment category in OME9 by copying K and maintain the cost center as optional. Please note that you have to maintain the item category blank and the account assignment category combination in OMG0. Now, you can use a GL account in PO which doesnt require a cost center assignment (in OBC4 against the field status group of the GL)
   You may use the same account assignment category created in the previous step with item category D, after you maintain the combination of the account assignment with item category D in OMG0.
    Please test the scenario and revert back.
Regards,
AKPT

Similar Messages

  • Updating the VETVG table while creating the purchase order

    hi all,
       I have one requirement to calculated the delivery creation date while creating the Purchase Order. It is calculated based on the delivery date of PO. I have calculated that one but how to update it after calculation. Can any body give a user exit or BADI with implementation which will update the VETVG table while creating the PO.
    Thanks
    rajkumar

    hi sanjay,
    thanks for reply, I am using same BADI(ME_PROCESS_PO_CUST) and implementation(FIELDSELECTION_ITEM_REFKEYS). In this implementation i am setting the shipping data with SET_SHIPPINGDATA method . but after that the values are not updating the EKPV and VETVG tables but it is only showing in the screen. Can you give a idea where to pass these values so it will update the tables.
    thanks
    rajkumar

  • HOW CAN I GET THE PURCHASE ORDER RELEASE DATE

    Dear All,
    HOW CAN I GET THE PURCHASE ORDER RELEASE DATE - any reprot is there?
    Thank you
    Ahmad

    Hi,
    u goto that PO and select Environment on top line .under that select header changes if u click on that u will get entire details who reased when released, date , time etc
    regards,
    Srinivas Kona

  • While creating  the purchase order

    Hi all,
    While creating the purchase order I am getting error like No account assignment to customer order (Not Active in co area 1100, Year 2007)
    please help me out from this problem
    Thanks and regards,
    Sreekanth Lokaray

    Hi Nazim,
    I got the solution by doing the maintain controlling area I activate the sales order.
    and In t.code vkoa I have given the condition type for sales organization.
    Thanks and regards,
    Sreekanth.L

  • When we create a Purchase order that has PIR in line item, the text is stored in EINA or EINE?

    Hi Friends,
    I have a requirement that, whenever we created the PO that has PIR in line item, the text is getting stored in EINA or EINE table.
    so here the businees need to move the text which storing in EINA /  EINE to ekpo text id up on saving.
    please suggest how i need to proceed with this issue.
    Thanks in Advance,
    kasi.

    Hi Madan,
    Thank you for your reply.
    As per your suggestions I found  BADI  ME_PROCESS_PO_CUST.
    Could you please help me how to read the "Info record PO text" for each line item in the purchase order and i want to save the readed text into EKPO-txz01.
    Thanks in Advance,
    kasi.

  • How can I terminate the purchase order item?

    Dear all,
    I have created and released a purchase order, which had two items. like following
    Item Material no qty delivery date
    10 Material-A 1000 pcs 12-25-2008
    20 Material-B 300 pcs 12-28-2008
    This purchase order has been released. And the vendor production order had been released and producted too. Item 10 has been producted and deliveried 300 pcs to our company. Now the purchase department asked to terminate the item 10. They didn't want the 700 pcs left.
    So we have to cancel the purchase order item 10. But we couldn't terminate this item.
    How can I do? Please tell me how to do step by step.
    Thank you very much!
    Paul.

    Dear,
    You can't delete purchase order at header level.
    You have to deleter purchase order line item wise.
    You can do it with ME22N t-code.
    Enter t-code ME22N, Select all line item of purchase order and click on delete indicator.
    Otherwise click on Delivery complete indicator of purchase order.
    You can also delete purchase order line item wise with MASS t-code.
    Enter t-code MASS, Select object BUS2012, Go in Field tab and select field MASSEKKO-LOEKZ and click on execute button.
    Then enter your purchase order documents number and enter indicator for deletion as X.
    Regards,
    Sri

  • Create fixed assets from within the transaction for creating the purchase order

    Hello All,
    I have gone through the notes on help.sap.com related to automatic creation of asset master record at the time of creating purchase order.  I am not sure how do we achieve this?
    Link to the notes on help.sap.com
    SAP Library - Asset Accounting (FI-AA)
    Any suggesstions from the expert group is appreciated.
    Thank you,
    Vinay

    Hi Vinay
    I know there is a feature whereby you assign asset classes per material group and then you create assets from within the PO. I never used it though
    Let me tell you one thing or rather ask you. Will you as a finance consultant be willing to let a MM guy create the assets??
    Or will a MM guy be willing to create it?? If you allow them, you should be ready for surprises.
    Honestly, this is a feature not worth exploring unless a FI guy is willing to create the PO. I would suggest the creation of asset masters should be with FI only
    Br. Ajay M

  • Report on hwo have created the purchase order

    We have any report in mm which can provide purchase order & who have created that purchase order.
    For example I want to see purchase orders for period 01.10.2011 - 30.11.2011 for plant 1000.
    Thanks,
    Kiran

    Hi
    check report ME2N
    here select dynamic selection at header level then select header and then selected created by and created On
    and give selection parameter there
    Regards
    kailas ugale

  • How can we download the Purchase order report?

    Hi,
    In my requirement i am displaying the PurchaseOrder details report to the Manager in the workitem he want to download the report (after execution of the workitem the manager approved the PO) in the form of EXCEL sheet.
    Can anybody give the solution for this?
    Early response is appriciable and rewardable?
    Regards,
    Chow

    Hi,
    No i am not using any portal to execute the work item.
    can you please tell what is this UWL(Portal)?
    With this how can we execute the Workitem?
    How can we download the report by using the UWL portal to execute the workitem?
    Early response is appriciable.
    Could you give the reply ASAP Please?
    Regards,
    Chow.

  • While creating the purchasing order in 3rd party

    sd guru's,
    while creating the p.o.in 3rd party sales 'company code not assigned to country or country to calculation procedure' i have this error.
    i assigned country to company code.
    then i was trying to assign calculation procedure to country 'in' in t-code'obbg', but there is no calculation procedure for india.
    how to define calculation procedure and assign.
    plz..
    thanks and regards.
    raju.

    Raju,
    In OBYZ-Define caluculation procedure and assign in OBBG
    AWARD IF U FINDS THIS AS USEFUL....
    Regds
    MM

  • How to create multiple Purchase Order  using the same document number?

    HI Friends,
    I m in a product which extracts data from SAP and stored in Access database.
    For that,while i extracting Purchase Order from the Demo Database (SBODemo_US)for OEC Computers,the same DocNum is used for several Purchase Order using Index Line numbers.
    eg:
    DocNum for Purchase Order1 -->3000   0 (Index)
      DocNum for Purchase Order2 -->3000   1 (Index)
        But i can't create multiple Purchase Order using same DocNum manually in SAP B1,Could anybody please help me <b>to create a Purchase Order using same DocumentNumber?</b>
    Thanks in Advance
    SooriyaKala.P

    Hi,
    The problem statement is not quite clear to me.
    As far as I understand your statement, I think you want to club multiple orders into one purchase order using the index incrementally.
    For this I think once you have created the first purchase order, open the purchase order in edit mode the second time and append the new line items.
    If I am getting you wrong please explain the problem statement in more detail.
    Regards,
    Rara.

  • How create a purchase order without imputation using bapi: BAPI_PO_CREATE1

    Hello Forum
    I have an request for purchase order with imputation K (cost center, EBAN-KNTTP). During the liberation of the request for purchase order, and using the Bapi: BAPI_PO_CREATE1, I want to create a Purchase Order without imputation (imputation empty or charge empty).
    The system displays the following error: The request for purchase order, item (position) 10, is attributed to another order...
    I imagine that is because the request for purchase order has imputation (charged) K and the purchase order will have no type of imputation (imputation empty).
    However, manually, Yes, I can create the purchase order. That is, I first release, the request for purchase order. Then I create the order of purchase using ME21 and with reference to request for purchase order, and when SAP returns the items of the request for purchase order, I manually remove the imputation K, and these items to become the purchase order.
    Please support me want to know how to resolve this case, why can not I create a purchase order without imputation to from the request for purchase order with imputation K, using Bapi
    Thank you.
    Greetings,

    Hi,
    In the item overview of the purchase order creation screen (ME21N), you have a column Purchasing Doc and next it item no.  You can give the existing purchase order number here with item no which will create a purchase order, and changes can be made wherever you require.
    Hope this helps.
    Thanks
    Krishna.

  • Can you add a Purchase Order with Sales Order as its Base Type using DI-API

    Is it possible to set the basetype on a PurchaseOrder document line to 17 to create a document as you would using the Procurement Confirmation Wizard in the UI?
    I am using 8.81 SP00 PL09.

    Anyone?
    We already have code to automatically generate Sales Orders using the DI-API, and if we could automate the create of the Purchase Orders as well, it would save a lot of end-user time.
    We would like to do it with the Base/Target references set so that end users can navigate between them in the UI.
    You can do it with the Procurement Confirmation Wizard, and I would like to know if it is possible to replicate this functionality through the DI-API or if I should move forward by just creating the Purchase Orders without reference to the Sales Order and using a UDF to tie them together.

  • Which is the process (or Package) that approve the Purchase Order

    Hi All,
    I have a custom process that modifies need by date and promised date fields in Purchase Order. After that the Purchase Order that has "Aprove" status change and say "Required Reaprove". Do you know which is the package that I can execute in order to aprove again the PO ?.
    Thanks Mariano.-

    Hi Hussein,
    It was a good idea to make a trace. I finally found the solution. Here it is....
    Thanks a lot !!!
    begin
    FND_GLOBAL.APPS_INITIALIZE(1911,50737,20003);
    end;
    begin
    MO_GLOBAL.SET_POLICY_CONTEXT('S',81);
    end;
    declare
    v_wf_seq NUMBER;
    v_itemkey VARCHAR2(100);
    begin
    SELECT TO_CHAR (po_wf_itemkey_s.NEXTVAL)
    INTO v_wf_seq
    FROM SYS.DUAL;
    v_itemkey := TO_CHAR(5782)|| '-' || v_wf_seq;
    po_reqapproval_init1.start_wf_process (itemtype => 'POAPPRV'
    ,itemkey => v_itemkey
    ,workflowprocess => 'POAPPRV_TOP'
    ,actionoriginatedfrom => 'PO_FORM'
    ,documentid => 5782 -- po_header_id
    ,documentnumber => '388' -- OC
    ,preparerid => 82 -- agent_id
    ,documenttypecode => 'PO'
    ,documentsubtype => 'STANDARD'
    ,submitteraction => 'APPROVE'
    ,forwardtoid => NULL
    ,forwardfromid => 82 -- agent_id
    ,defaultapprovalpathid => 10
    ,note => NULL
    ,printflag => 'N'
    ,faxflag => NULL
    ,faxnumber => NULL
    end;

  • Email of the Purchase Order to the User

    Hi,
    Currently, I am able to send the email of the purchase order to the vendor mail address, which is mentioned on general data tab of the vendor master.
    In addition, the requirement is that the purchase order also to be emailed to the User, who has created it.
    I have added the VU in NACE settings for application EF, output type NEU. The payment medium I have used is 5 (external send).
    However, when I try to add the VU and the user name to the vendor master partner details tab, the system is not taking in.
    Please let me know how can I email the purchase order to user.
    Thanks in advance for your time.
    Thanks,
    Ravi

    Hi,
    1) Add the user email address also in the vendor master.
    2) Verify all settings in condition records.
    3) Check tcode sost for any waiting send requests.
    Regards,
    BK

Maybe you are looking for

  • How to call oracle stored procedure with OUT parameter?

    I create oracle stored procedure in eclipse oepe PROCEDURE SP_SELECT_ORA ( ID_INPUT IN VARCHAR2, ID_OUTPUT OUT VARCHAR2, PASSWD_OUTPUT OUT VARCHAR2, NAME_OUTPUT OUT VARCHAR2) IS BEGIN SELECT EMP_ID, EMP_Passwd, EMP_Name INTO ID_OUTPUT, PASSWD_OUTPUT,

  • Adobe album photo 'reconnect' causes Runtime error in Microsoft Visual C++ Runtime Library

    When I try to open photos from any of my Adobe 3.2 Starter Album albums, it tells me I must reconnect the files.  Adobe browses for them, and can usually locate them on my hard drive.  Lately, it can't find them, and I have to 'browse' to locate them

  • Import binary file in cvs repository through java cvs import command

    hi , I am using netbean api for cvs command.I am having the same problem that i am not able to open binary file after importing in cvs repository. I want to import a directory which contain both text and binary file. can you please hel me out to how

  • Dates prior to Jan. 1, 1970 in milliseconds???

    In my jsp, using tags, I'm trying to convert a birthdate, retrieved from a database, in the format of MM/DD/YYYY into milliseconds. It's very possible this date would be prior to 1970. I've tried using <fmt:parseDate> and <fmt:formatDate>. Appreciate

  • Is S_RFCACL a critical Authorization Object ?

    Hi All, As we know that S_RFCACL (Authorization Check for RFC User (e.g. Trusted System)) is required for having access to the trusted systems. In most of our roles for this authorization Object we have maintained the * value for the following fields