Can we create two different Segments at client and company level

We have a particular requirement in segments reporting. we have to provide product wise segments reporting at client level and for income tax purpose one of our manufacturing plant has to maintain a separate books of accounts for this purpose we want to create a separate geographically at company level of this plant which is in different state. can we create this type of segments for separate books at company level.
If there is any other process where we can get separate books of accounts.

Dear,
Of course you can do this but only worrysome thing will business users will be confused between the Plant and product line business segment.
You must have Product Line (for e.g. segment 1000) is manufacture at plant 1000 (segment 2000), so when any expense occur in Plant 1000 for Product Line 1000 which segment should be used???
So give precedence to segment whichever you want......and costantly monitor entries being posted to thses segment...
Regards,
Chintan Joshi

Similar Messages

  • My wife and I decided to both buy Iphones do I put them both under the same apple ID, or do I create two different apple ID's and two differnt icloud accounts?

    My wife and I decided to both buy Iphones do I put them both under the same apple ID, or do I create two different apple ID's and two differnt icloud accounts? We want to be able to share my itunes library on both our phones and sync our calendars, but I don't want every update and reminder that my wife puts in her phone and I know she doesn't want every reminder I put in my phone.

    What you need to do is both use the same Apple ID for iTunes content, but separate Apple ID's for everything else. So, you keep your existing Apple ID. If not a verifiable email address, you will need to create a new Apple ID for yourself. You also create an Apple ID for your wife, again a verifiable email address. You use the existing Apple ID for all iTunes content. The new Apple ID's for iCloud, iMessage, FaceTime, etc. Here's how to create an Apple ID:
    https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/wa/createAppleId?loca lang=en_US
    Use multiple devices on one computer:
    http://support.apple.com/kb/HT1495

  • Can we create two different forms in one program

    Hi Experts,
    i have to create a smartform in which there is two type credit and second is invoice.If the type is invoice then open a different form in size also and if it is credit then open a different form . Is it possible that we can craete two different forms in one program.can hide the form according to type.

    Hi
    Yes u can just simply
    START-OF-SELECTION.
      PERFORM CHECK_INVOICE.
    For Credit Memo
      IF W_DOC_CAT = 'O'.
        PERFORM GET_HEADER_DATA1.
        PERFORM GET_DATA_ITEM1.
        PERFORM GET_FOOTER_DETAIL1.
        PERFORM GET_HEADER_TEXTS1.
        PERFORM DISPLAY_SMARTFORM_CREDIT.
      ENDIF.
    For Debit Memo
      IF W_DOC_CAT = 'P'.
        PERFORM GET_HEADER_DATA2.
        PERFORM GET_DATA_ITEM2.
        PERFORM GET_FOOTER_DETAIL2.
        PERFORM GET_HEADER_TEXTS2.
        PERFORM DISPLAY_SMARTFORM_DEBIT.
      ENDIF.
    try and

  • How can I create two different home pages or set up two different tabs when I open my firefox browser?

    I want to open up my Firefox browser and have two different tabs on my home page. How do I do that? Thanks!

    http://support.mozilla.com/en-US/kb/How+to+set+the+home+page

  • Can I create two different FDM applications in a single database?

    Hi,
    Atpresent we are using separate database (MSSQL Server 2008) for each FDM applications, now our databases have increased in numbers due to increase in number of applications.
    Now we are searching for any possibility to use a single database for more than one different FDM applications inorder to reduce the new database creation numbers in future.
    Any suggestions would be greatly helpful.
    Thanks in advance.
    Abdulla Javeed Hassan

    Yes. Reduce the number of FDM applications you are creating. You can have multiple target system adapters in a single FDM application (i.e. a single database only required). There is no need to create a new application for each target system.

  • Do we need to create two different home for UCM and WC?

    Hi All,
    I am trying to create Webcenter VM(oracle linux 5) with ECM I used 11.1.1.5.0 version for all installable.for creating this VM.
    here do we need to create separate Home for webcenter and UCM installations.
    any one give me some proper directions to installation of the same
    thank you!
    Siva

    yes i saw those folders but while installing I installed weblogic server in fmw folder.then Installed UCM on top of the i installed WC,but while installing WC its showing ora home is already exits select another or override. like that i am getting so i override. when i am creating domain its completed but i am not able to see startWeblogic.sh in bin folder of the domain.
    I realized that i did mistake while installation.
    can you please give me best infrastructure for web-center installation with all features(portal,sites spaces and content) I have sufficient memory to run multiple VMs.
    Thank you!
    Siva

  • In Numbers, can I highlight/colour differently to show high and low level requirements from the Y Axis?

    I have a line graph in Numbers 09, but would like to either fill the chart between two points on the Y axis which shows the upper and lower limits of a set of results. Is this possible? I don't seem to be able to select the two points I want and end up with the Grid lines being all the same colours when I select colour or the Chart fill is all or nothing!
    Thanks
    altv

    Jerrold Green1
    I have done it both ways, the way you have suggested, the drawing of two lines for Upper and Lower limits and a combination of the two. They are all working fine. As you say, with use, I'll find other things that can be done with it, certainly from an aesthetic point of view.
    Many thanks
    altv

  • Can you have two different users with itune accounts on the same computer?

    Can you have two different users with separate itune accounts on the same Ipad?

    Yes, create another user profile on the computer and each user can log into their own profile that way.

  • Have two i phones owned by one person.  Gave older I phone 4 to spouse.  All synced items going to both phones.  Created two different Apple ID Accounts but still having problems.  Bought more icloud for one device but it went to the other one didnt need

    How can i seperate to i phones that have been synced together.  I created two different Apple Id accounts but for instance my icloud purchase didnt go to the phone i needed it to go to

    If you look at Settings > iCloud on each phone, is the Account different? The Apple ID listed there should control iCloud storage allocation.  [I assume your "icloud purchase" was more storage capacity.]
    The Apple ID is separately specified to control iMessage, iTunes and App Store purchases, etc.

  • How Can i Use two Different Public IP Addresses no my DMZ with ASA Firewall.

    How To Using Two Different Public IP Address on My DMZ with ASA 5520
    Postado por jorge decimo decimo em 28/Jan/2013 5:51:28
    Hi everyone out there.
    can any one please help me regarding this situation that im looking for a solution
    My old range of public ip address are finished, i mean (the 41.x.x.0 range)
    So now i still need to have in my DMZ another two servers that will bring some new services.
    Remember that those two server, will need to be accessable both from inside and from outside users (Internet users) as well.
    So as i said, my old range of public ip address is finished and we asked the ISP to gives some additional public
    ip address to address the need of the two new servers on DMZ. and the ISP gave us the range of 197.216.1.24/29
    So my quation is, on reall time world (on the equipment) how can i Use two different public ip address on the same DMZ
    on Cisco ASA 5520 v8??
    How my configuration should look like?
    I was told about implementing static nat with Sub Interfaces on both Router and ASA interface
    Can someone please do give me a help with a practical config sample please. i can as well be reached at [email protected]
    attached is my network diagram for a better understanding
    I thank every body in advance
    Jorge

    Hi,
    So looking at your picture you have the original public IP address range configured on the OUTSIDE and its used for NAT for different servers behind the ASA firewall.
    Now you have gotten a new public IP address range from the ISP and want to get it into use.
    How do you want to use this IP address range? You want to configure the public IP addresses directly on the servers or NAT them at the ASA and have private IP addresses on the actual servers (like it seems to be for the current server)?
    To get the routing working naturally the only thing needed between your Router and Firewall would be to have a static route for the new public network range pointing towards your ASA OUTSIDE IP address. The routing between your Router and the ISP core could either be handled with Static Routing or Dynamic Routing.
    So you dont really need to change the interface configuration between the Router and ASA at all. You just need a Static route pointing the new public IP address towards the ASA outside IP address.
    Now when the routing is handled between the ISP - ISP/Your Router - Your Firewall, you can then consider how to use those IP addresses.
    Do you want to use the public IP addresses DIRECTLY on the HOSTS behind the firewall?This would require you to either configure a new physical interface with the new public IP address range OR create a new subinterface with the new public IP addresses range AND then configure the LAN devices correspondingly to the chosen method on the firewall
    Do you want to use the public IP addresses DIRECLTY on the ASA OUTSIDE as NAT IP addresses?This would require for you to only start configuring Static NAT for the new servers between the inside/dmz and outside interface of the ASA. The format would be no different from the previous NAT configuration other than for the different IP addresses ofcourse
    Of the above ways
    The first way is good because the actual hosts will have the public IP addresses. Therefore you wont run into problems with DNS when the LAN users are trying to access the server.
    The second way is the one requiring the least amount of configurations/changes on the ASA. In this case though you might run into problem with DNS (to which I refer above) as the server actually has a private IP address but the public DNS might reply to the LAN hosts with a public IP address and therefore connections from LAN could fail. This is because LAN users cant connect to the servers OUTSIDE NAT IP address (unless you NAT the server to public IP address towards LAN also)
    Hopefully the above was helpfull. Naturally ask more specific questions and I'll answer them. Hopefully I didnt miss something. But please ask more
    I'm currently at Cisco Live! 2013 London so in the "worst case" I might be able to answer on the weekend at earliest.
    - Jouni

  • How to create two different implementation class for a Control

    Hi,
    I am a newbie to beehieve. I want to know that is it possible to create two different 'Impl' classes for a Control. If yes then how do we instantiate them ? How can we chain them (something like calling one 'Impl' from the other one? Thanks in Advance!!!
    Regards,
    Abhishek

    You are sure you are in the right forum?
    This is the JDeveloper and ADF forum...
    Timo

  • Create two different DME files in FBWE

    Hi all,
    I'd like to create two different DME files in FBWE transaction, depending on payment metod (or depending on account used for bills of exchange receivable).
    Could anyone tell me where and how can I solve this problem?
    Many thanks
    Regards
    Francesca

    Dear Fransca,
    when You run FBWE and You get the list, then You have several tab:
    Cust   Bill/ex data   Presenting bank  Totals   Posting params
    Please go to Posting params -->
    there is a frame named --> Create DME file
    here You can choose the DME type
    Usually for Italy we use IT01 that will produce the file on the base of CBI officila format.
    By the report RFWEDX00 You can download the file in the correct way.
    I hope this can.
    Mauri

  • Create two different printer profiles in ePrintCenter.

    Dear,
    I want to create two different printer profiles: one "color" printer and one "black & white" printer.
    In the ePrintCenter you can only create one kind of profile. (Associated with one e-mail address)
    Is it possible to set this up?
    Regards.
    Printer: HP OfficeJet 6500A

    Hello skeg,
    At this point there is not a way to create two different profiles on an account in ePrintCenter. The only way to switch between the two would be manually on the "ePrint Settings" within ePrintCenter.
    If you were trying to do this from an iPhone or Android phone it would be possible to download the HP ePrint home & biz app which would allow you more options regarding printing in color and paper size and type.
    If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • Can we access two different Siebel BO in Same OPA Rule Base

    Hi all,
    can we access two different BO's from same rule base.
    what i means is,can we pass siebel data to OPA Rule Base from two different BO's .
    Thank you for your help in advance.

    There are two approaches to do this and they both involve making some small changes on the Siebel side.
    You can create an Integration Object which contains all the business components that you want to send to OPA if you are using an Integration Object mapping.
    If you would prefer to use a Business Object mapping then you will have to create a new Business Object which combines the BCs of all the Business Objects that you want to send to OPA.
    As you can see, although one approach involves Integration Objects and one involves Business Objects they both work by creating a single object which is an amalgamation of the information that you want to send to OPA.
    Cheers
    Frank

  • Create two different iCloud accounts with 2 iPhones (family plan)?

    How do I create two different iCloud accounts with 2 iPhones (family plan). Both phones are registered under my name, and when my wife set up her phone with iOS 5, it will only let her log in using my account. I thought it used your iTunes account info, is this not the case?  I really want her to have her own seperate account on her phone.
    --Brian

    I resolved it by using our seperate apple ID's. Since we already had our own itunes accounts I canceled iCloud on her phone that was using my account and logged in with hers.  I did read somewhere where you can have multiple iCloud accounts under the same user ID but I'm not sure how that works because that is exactly how ours were set up initially and all the suddon all of her contacts and calendar items were on my phone and iPad and vica-versa . It was a pain to remove them one at a time after I broke the accoutns apart.  I know that doesn;t really answer your question, but that was my workaround. Of course that also mean no app sharing.

Maybe you are looking for