Can we do multiple transaction testing in different browsers?

Helllo, I am trying to do transaction testing instead of URL based i.e. suppose take net banking and wanted test login , post login and credit card section. Then how can i do that ?

I apologize, I'm still a little confused as to what you're asking for. If you'd like to test transactions (e.g. logging into your website, entering credit card numbers), this is not a use case for BrowserLab.
However, if you're saying you'd like to take screenshots of those states/pages of your application and make sure they look correct in various browsers, then yes, you should be able to do that. Install Firefox, Firebug, and our BrowserLab for Firebug add-on and you can interact with your pages and have BrowserLab take screenshots of the various states/pages you see in your browser. Details are here: http://forums.adobe.com/thread/786305?tstart=0
Please let me know if I've misunderstood or if you have any further questions,
Mark

Similar Messages

How can we use multiple transactions by using bdc_insert.

HI
How can we use multiple transactions by using bdc_insert.

Hi,
In between the Open and Close we have to use the BDC_INSERT for the Tcodes you have to do.
BDC_OPEN_GROUP
BSD_INSERT
TCODE = tcode1
BDC_INSERT
TCODE = tcode 2
BDC_CLOSE_GROUP
check the SDN for more on this.
Regards
Lekha

Can you run multiple APEX listeners for different instances on the same server

Please confirm that we can run multiple APEX listeners for different instances on the same server? Is it an xml setup configuration or do we need to do more??
Thank You,
Tony Miller
SmartDog Services
Austin, TX

Yes.. Just exactly what I was looking for...
Thanks Jari!!
Thank You,
Tony Miller
SmartDog Services
Austin, TX

Can I have multiple pre tests and a final test?

Hi,
I want to create unit whereby I have small pre-tests (5) to check knowledge, they must get answer ciorrect to continue. Then i want to create a final test at the end of the project.
Is this posisble or do i need to have different projects?
Many thanks
FS

I think trying to get feedback to work with Survey Questions using Advanced Actions would be a lot more trouble than it's worth.
Also, using Pretest questions is not the answer because they're very limiting in other ways. They MUST all be at the beginning of the project BEFORE the main quiz, and they disable the playbar for the entire module. (This is by design.) The way Pretests currently work is not usually what authors are looking for.
If setting ordinary quiz question slides to zero points and deselecting the option to Include in Quiz is NOT enough for you, then I suggest you resort to creating your own 'question' slides via other methods such as building them from default interactive objects available in Captivate. You can use widgets or buttons or Smart Shapes or Text Entry boxes to replicate most of the other question types.

Multiple report servers - with different uifont.ali

Can we have multiple report servers with different NLS_LANG?
They all should be started as windows service. Also I would like to have them look at different uifont.ali. The reason is that we want to have the same report run with different fonts in different languages. This way I can map the fonts in uifont.ali as I want.
Is it possible?

I don't think this is possible with multiple reports servers with one Oracle 9iAS home. You will have to install multiple 9iAS, in different Oracle homes.
This also means that you have different URL's (port numbers) for the two environments.
I have used this configuration before to install a test and production environment on one web server. Changing the conf files, variables etc. in the test environment doesn't influence the production environment that way.

Managing multiple iOS devices on different Apple accounts from the same iMac

May be a very simple question to answer, but can I manage multiple iOS devices on different Apple accounts from the same iMac?
I ask as whilst I'm totally Mac'd, my partner who has her own Apple account has a Winows laptop and experiences problems updating iOS software on her iPhone 4S and iPad 3 Gen via the laptop. I'm thinking the problems may be overcome if we manage her iOS devices through my iMac.

Thanks dwb .... I thought there'd be a catch .... not to keen on all that media and apps on my iMac!
The specific problem is that whenever she updates to the latsest version of iOS using the latest iTunes for Windows on her PC laptop she seems to lose something in the process. One time she lost all her texts and the other day when updating to 5.1.1 she lost all her reminders. Not the end of the world but frustrating and shouldn't really happen and doesn't happen to me using the iMac and OSX.

Can ASA support multiple PPPoE?

Can ASA support multiple PPPoE configured on different interfaces?
If support, can it load-sharing the outgoing packet to different PPPoE connection?
Thanks!

Actually the PIXASA firewall does not support PPPoE since version 7.2 I believe. That is the official statement, all though I believe the commands are still there and functional. You could do it with a router.
Hope that helps

Can a single HID report descriptor support multiple touch screens with different sizes?

Hi Experts:
I have a question for specifying touch monitor sizes in the HID report descriptor:
Can ONE HID report descriptor support multiple touch monitors with different sizes ?
Thanks in advance
leo

My screen shot is from AA9, and I have seen that the UI for AAX is vastly different, but...
Choose Paper Source from Page Size should be the "one-touch" solution your looking for.
In my test, my Konica-Minolta Bizhub failed to detect the proper paper trays, but Acrobat correctly spooled the pages.

How can I edit multiple clips with different frame rates on the same timeline

how can I edit multiple clips with different frame rates on the same timeline

You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
Have fun.
x

Can I use multiple Apple store gift cards per transaction or is it has to be one gift card per transaction?

Can I use multiple Apple store gift cards (£25 each) per transaction or is it has to be only one gift card per transaction?? Does anyone know thanks

Hola, Eddy
notice that you have posted to an old thread (Oct-Nov2013) that actually took quite some time to get attention back then**
I recommend that you contact the Store Group regarding your purchase question - don't let the "iTune-ish" URL and page title throw you off... it's the right place
Store Group - Contact Us - Apple Support
** next time you have a question, I advise to check the dates carefully and if older than a month or so, AND it has no answer to your specific issue, start a NEW Question. You did a fine job of stating your exact issue - many folks, not so much.
buenos dias
CCC

Alert: WebServices connectivity (Internal) transaction failure - The credentials can't be used to test Web Services.

Hi.
Could you please help me to resolve this issue.
I have SCOM 2012 installed to monitor environment with Exchnage 2010 SP3. There are 2 sites with Exchnage servers within the organization. There are 2 mailboxes being created to test both sites.
I am getting following alert:
Alert: WebServices connectivity (Internal) transaction failure - The credentials can't be used to test Web Services.
description: The test mailbox was not initialized. Run new-TestCasConnectivityUser.ps1 to ensure that the test mailbox is created.
Detailed information:
[Microsoft.Exchange.Monitoring.CasHealthUserNotFoundException]: The user wasn't found in Active Directory. UserPrincipalName: extest*****@****.local. Additional error information: [System.Security.SecurityException]:
Logon failure: unknown user name or bad password.
Diagnostic command: "Test-WebServicesConnectivity -MonitoringContext:$true -TrustAnySSLCertificate:$true -LightMode:$true"
EventSourceName: MSExchange Monitoring WebServicesConnectivity Internal
I have tried the next steps:
1. Verified that mailbox is exist and it's not locked (same for the second mailbox)
2. Deleted those mailboxes and created a new using new-TestCasConnectivityUser.ps1 verified that this mailbox is visible on all DC's accross the forest (both mailboxes)
and that temporary password was accepted;
3. Cleared the cache on the SCOM 2012;
4. Still getting the same alert
I will really appriciate any help.
Thanks.

Hi,
Hope these posts help you:
http://thoughtsonopsmgr.blogspot.ca/2013/11/exchange-server-2010-mp-no-synthetic.html
https://social.technet.microsoft.com/Forums/systemcenter/en-US/437f2bbb-cd96-40c3-8c56-6d4d176a9520/exchange-2010-mp-constantly-throws-webservices-connectivity-internal-transaction-failure?forum=operationsmanagermgmtpacks
Natalya
### If my post helped you, please take a moment to Vote as Helpful and\or Mark as an Answer

How can you have multiple, different css link styles?

Every time I want to create a different looking link just for some copy, it always reverts to the A:link style, even if I create a new style that looks just the way I want. How can I create multiple link styles and then be able to select the one I want at any time???
I would greatly appreciate any help.
Allan

How are you applying the different styles to your links? In most cases, it's easiest to wrap the link(s) in an element, like a < div > that has a class or ID assigned, for instance class="altLinks". Then, set up the CSS style names like:
.altLinks a:link
...and so on. Then, the styles would just apply to links within the element(s) with class "altLinks". Here's a tutorial that might also help:
http://www.golivecentral.com/pages/tutorials.shtml#basicCSSlinks2
Otherwise, if you're still having trouble, post back with a link to your page so we can see what's going on.

HT3702 How can I just prepay say 500 dollars on my itunes account, so that I dont need to have multiple transactions on my credit card...?

Hello There! How can I just prepay say 500 dollars on my itunes account, so that I dont need to have multiple transactions on my credit card...? Cheers Dilip

Hello DilipVenkat,
Welcome to the Apple Support Communities. If you want to have a purchase iTunes Gift Cards to have credit on your account, just purchase an iTunes Gift Card at your local Apple Online Store or through iTunes. Store.
iTunes: Sending iTunes Gifts
http://support.apple.com/kb/ht2736
iTunes Store: How to redeem a code
http://support.apple.com/kb/HT1574
Regards,
-Norm G.

Can I place a multiple card order using different cards?

Can I place a multiple card order using different cards eg personalising Christmas cards for family and friends, but ordering them on the one order?

No.
Regards
TD

HT1386 Can i sync multipler iOS devices like iPad, iPhones on the same iTunes? Can each iOS device have different contents which are subsets of the iTunes complete library

Can i sync multipler iOS devices like iPad, iPhones on the same iTunes? Can each iOS device have different contents which are subsets of the iTunes complete library

You can share a library with as many devices as you want but they cannot have seperate subsets like you wish. They would all have access to all information in the library. You could "Manually" sync content to each device by doing the following:
On Mac: iTunes > Preferences > Devices Tab > Put a check in the box next to sentence that says "Prevent iPods, iPhones, and iPads from syncing automatically > Then click ok.
On Pc: Edit > Preferences > Devices Tab > Put a check in the box next to sentence that says "Prevent iPods, iPhones, and iPads from syncing automatically > Then click ok.
To manually sync data from iTunes to devices see article below:
 http://support.apple.com/kb/HT1351
If you do not want all devices to have access to all the media from the main library, you would need to create a library for each device. See the article below for more info:
 http://support.apple.com/kb/HT1495
Hope this helps.

Can we do multiple transaction testing in different browsers?

Similar Messages

Maybe you are looking for