Can we have one sender and mutliple receivers in XI processing

Hello,
I will explain a scenario where you will have one sender channel and mutliple receiver channels.
There is a sender channel along with Sender Agreement where u mention the interface name and namespace.
There are two receiver channels along with two Receiver Agreements one for each with different interface names and namespaces also.
Now the processing is like this,
Sender sends some data and depending upon the agreements the corresponding receiver receives the data.
Will the process is correct or is there any other way to run the scenario?
Thanks,
Prakash

Hi Prakash chitti,
    Of course the scenario that you were telling is possible.. Take the case of file-to-multiple file scenario, where single file sends the source xml and multiple receivers gets the file.. For that you need to have
1: one sender channel
2: two receiver channel
3: one sender agreement
4: two receiver agreement
5: One interface determiniation
6: One receiver determination
at the receiver determination, goto the tab 'Configured Receivers', and specify the number of recievers; and ensure they are present at the 'Configuraton overview for Receiver Determination'..
You can even set conditions for receiver determination from the source point..
This will help you.
Thanks
   Vinod V
Help me with points

Similar Messages

  • Problem in query jump from one sender and two receivers

    Hello all,
    My requirement is to jump from one query to another two queries. The sender comes from infoCube A and receivers comes from ODS B and ODS C (ODS C is a copy of ODS B). The problem is that when I execute the first jump a pop up appears with a selection date. This issue does not happen when I execute the second jump (and the selection date is needed). Target queries are identical, and I don´t know what is happening.
    Any ideas?
    Thanks in advance.
    Carmen

    Hi Carmen,
    I think you have used the same variable for the day selection for the query on ODS C and ODS B. Hence when you fill it for the first time it does not ask you at the second instance.
    Regards.

  • Regarding 1 sender and 2 receivers

    Hi,
    i'm trying to do a scenario for 1 sender and 2 receivers.
    but the receiver is again based on the condition like...if my id = 1 then receiver should be a if 2 then receiver is b.
    please give me clear picture of the scenario.
    i need starting from scratch like Data type to interface determination.
    ****full points are rewarded at the moment.****
    No links please
    Thanks,
    Mohan

    Hi,
    As u said that u have one sender and two receivers not to  worry we can do it
    In XI we have a concept called Context Object by which it is possible
    Use
    Context objects are a simple alternative to XPath expressions for accessing the contents of a message. Take the following message instance as an example:
    <InvoiceOut>
      <customerData>
         <address>
            <name> ... </name>
            <postalCode> ...</postalCode>
         </address>
      </customerData>
    </InvoiceOut>
    To access the content of the <postalCode> field, you would use the following expression in XPath:
    /InvoiceOut/customerData/address/postalCode
    If you needed this expression in more than one condition, you would have to rewrite or copy it each time. Instead, you can assign a context object to the <postalCode> field, for example with the name postalCode. You can then use the postalCode context object in all conditions where you need the value of the <postalCode> field, which makes the conditions easier to read.
    /people/prasadbabu.nemalikanti3/blog/2006/09/20/receiver-determination-based-on-the-payload-of-input-dataextended-xpathcontext-object
    in the context object we can give condition depending upon it the receivers are activated b/w 2 recv
    if found worth pls do the req
    Thanx
    Sampath

  • I have One Sender system and two receivers system scenario. Pls help

    Hello,
    I have One Sender system and two receivers system scenario.
    My sender is RFC (sync) in nature.
    My one receiver is RFC (sync) in nature.
    My second receiver is RFC (sync) in nature.
    How to proceed with this.
    If my second receiver is async then how to proceed with this.
    Regards

    Hi Rick !
    Depending on your requierements, you can create a BPM that
    1) receives request from sender
    2) sends request to receiver 1 / receives response from receiver 1
    3) sends request to receiver 2 / receives response from receiver 2
    4) do some processing with both responses
    5) sends response to sender.
    If your second receiver is async, just use an async send step in step 3. As far as I know, you cannot use multimapping with sync scenarios.
    Regards,
    Matias.
    ps: please award points if helpful

  • Can I have one apple ID and two iCloud accounts for different devices.

    can I have one apple I'd and numerous iCloud accounts for different devices?

    Yes you can, you just need to go into settings and into icloud, once it says account, login to your desired account

  • How can I have one "family" Apple ID and two icloud accounts one for me and one for the wife?

    MacVirgin!Just got new Air and iMac (iphones on the way). How can I have one Apple ID but two iCloud accounts (one for me and one for my wife)? I have set up one iCloud account and am attempting to share contacts between iMac, iCloud and Air, however iMac and iCloud are not in sync? I must be missing something very simple.

    ok. I set up the imac and Air with one user account. this was used to activae iCloud on both machines and I have now se up one iCloud account and managed to share calander and contacts between the two. Ultimately both me and my wife will have an iphone and we wish to share calenders and contacts. We both also use the imac and air on one user account. It looks like I need to set another user account then activate iCloud in my wifes Apple ID

  • I have one computer and 2 iphones i want to sync music on. but we want different music on the phones. is there a way i can make 2 libraries on 1 itunes?

    i have one computer and 2 iphones i want to sync music on. but we want different music on the phones. is there a way i can make 2 libraries on 1 itunes?

    You can create an alternate library: http://support.apple.com/kb/HT1589
    But it is easier to create one or more playlists and sync by selected playlists.  You can have some playlists for both phones and others for just one phone.
    Here are some other tips:  How to use multiple iPods, iPads, or iPhones with one computer, http://support.apple.com/kb/HT1495

  • 1. I have an iPod which has purchases synced with I tunes with an apple ID. I now have an iPad with a new ID for cloud. I have cloud storage capacity of 5gb which came with the iPad. How can I use one ID and store my existing music in cloud?

    1. I have an iPod which has purchases synced with I tunes with an apple ID. I now have an iPad with a new ID for cloud. I have cloud storage capacity of 5gb which came with the iPad. How can I use one ID and store my existing music in cloud?

    HI Frostyfrog
    CHeck out iTunes Match which has an annual fee of £21 or thereabouts. You can store a maximum of 25,000 songs there and they all become available on your other kit, iPhone, iPad and iPod. I know it works as I have over 23000 songs uploaded of which only a few we're bought through iTunes.
    it works by comparing your music to the whole iTunes music dadata base so you access the same tunes that you could get from iTunes. If you have obscure stuff, it uploads your own music to the cloud as a copy.
    I Find it incredible that on my iPhone with its 16gb memory I can view almost 200 gb of music (ie my 23000 songs) and play any of them. Anything I add to iTunes becomes available via the cloud fairly quickly from a few minutes or a little longer if adding a lot.
    The first time you use it it will take quite a while to match your music if you have a lot, but after that it is all automatic. Read the stuff on the apple site. Your PC needs to be at least running Vista. I recommend it and at less than 50p a week it's good value.
    Good luck

  • How can I have multiple accounts and only one library

    How can I have multiple accounts and only one library that all the purchased items feed into?

    ask your wireless provider.

  • Database 'TEST' is already open and can only have one user at a time.

    Hi all,
    Could some help on this issue as per urgency!
    Database 'TEST' is already open and can only have one user at a time.
    I also tried this command but having the same error, please let me know how to troubleshoot this issue
    Use Master
    GO
    Select * from master.sys.sysprocesses
    Where spid > 50
                And dbid=DB_ID (‘StuckDB’))  -- replace with your database name
    Thanks

    Hi Tony,
    sorry got the same error again, it can't allow me sp_who2 as well
    I tried above command got the following error
    Changes
    to the state or options of database ‘TEST’ cannot be made at this time. The database is in single-user mode, and a user is currently connected to it.Msg 5069, Level 16, State 1, 

  • When my hard drive died I lost my itunes library and now I'm being told that I can't synch my ipod with new songs unless I delete all existing because I can only have one library at a time

    when my hard drive died I lost my itunes library and now I'm being told that I can't synch my ipod with new songs unless I delete all existing because I can only have one library at a time

    Copy all the content on your iPod back to your PC and into iTunes. Then go ahead and sync the iPod with your new library.
    See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • How can I have one thing open in Safari on my MacBook Pro and search for another thing in Safari without closing out of the other? For instance, How can I leave Pandora playing while I search Facebook?

    How can I have one thing open in Safari on my MacBook Pro and search for another thing in Safari without closing out of the other? For instance, How can I leave Pandora playing while I search Facebook?

    With Safari open use the Command + T keyboard shortcut to open a new tab.
    Or, Command + N to open a new window.

  • My iPad was stolen, how can I have it blocket and/or send to the iPad a message to get it back

    My iPad was stolen, how can I have it blocket and/or send to the iPad a message to get it back

    If you enabled Find My iPad on it before it was stolen, and if it is still turned on and connected to the internet with Find My iPad enabled, you can do this by going to icloud.com as explained here: http://help.apple.com/icloud/#/mmfc0f0165.

  • Ok apple I have one complaint and that is the fact that when I am on the Internet with my iPod I can't get onto the AppStore because it says cannot connect to iTunes store

    Ok apple I have one complaint and that is the fact that when I am on the Internet with my iPod I can't get onto the AppStore because it says cannot connect to iTunes store

    Can't connect to the iTunes Store
    Best Fixes for ‘Cannot Connect to iTunes Store’ Errors | iPad Insight

  • If i have one iPad and I want all the apps that are there how do I copy that so i can have them on another iPad the same way as i have them on the first iPad?

    if i have one iPad and I want all the apps that are there how do I copy that so i can have them on another iPad the same way as i have them on the first iPad?

    If you want both iPad to be identical .....
    Without connecting your iPad to your laptop, start iTunes. Go to iTunes>Preferences>Devices. Check the box next to "Prevent your iPod etc. from automatically syncing." Click OK.
    Now connect your iPad to your Mac and start iTunes.
    When iTunes starts, right click on your iPad under Devices in the left column. Select Transfer purchases.
    After it finishes transferring all your apps to the Mac, right click on your iPad and select Backup your iPad.
    Sync the iPad and eject it when it is complete.
    Quit iTunes
    Connect the second iPad.
    Launch iTunes
    Right click on the iPad name on the left side and select - Restore from Backup
    Select the backup of the first iPad and let it restore from that backup.
    When it finishes restoring - sync with iTunes to transfer all of the apps and any other content that you want onto that iPad
    Eject the iPad when you are done.
    Check the second iPad and if all of the content did not sync as you wanted - or you want to remove some of the content - connect it again and then choose the content that you want - uncheck what you do not want - and click on Apply in the lower right corner of iTunes.

Maybe you are looking for

  • Cannot Update Windows 7 while connected to my WRT54G.

    For some reason the computers that are connected via wired or wireless through my WRT54G Vers. #6 (Firmware Version v1.02.8) will not connect for updates (Error Codes: 80072EE2-Win7, 80072EFD-Vista) especially OS, anti-virus, malware updates.  This l

  • Time out error in J1INQEFILE while generation ETDS file

    hi, when ever i am executing transaction J1INQEFILE. it giving Time out error. in dump folloeing message is coming. Termination occurred in the ABAP program "J_1I_QER_EFILE" - in "MOVE_VENDOR". The main program was "J_1I_QER_EFILE ". In the source co

  • Tecra R10 - How to remove the HDD?

    Is there a description available hoe to remove a harddisk in a Tecra R10 and plugin a new harddisc?

  • Check priting

    Hi Friends, 1) I am using this standard script F110_PRENUM_CHCK . while printing check in currency USD giving error. 2) From which table can i get deduction. i m currently using structure REGUD-dmbtr. deduction is null. Regards, K.Satyanarayana. <MOV

  • Is their any way to remove the zooming feature on Iphone4 while recording a video?

    Please help, I just recently purchased an Olloclip, and i noticed the iphone zooms in automatically when on recording a video mode. Maybe i should use a specific app when recording ? Or some kind of manual fix ? Thanks. Ryan.