Can we hide ABAP proxies?

HI Experts,
We have a scenario in which data is transferred from PI to BI and vice versa.
The communication is done via ABAP proxies as far as the documentation goes.
But I dont see the proxies generated in SPROXY. The system is running absolutely fine.
My question is, is it possible to hide business systems, proxies etc in PI 7.0?
If yes, how do we go about to find them.
Regards.

Hi,
We will always creatre Proxies in the application system. So please check your proxy in your BI system. We cannot hide the intereface either in ABAP or JAVA, but you can restrict access to the interface. If you see the interface in IR and ID and you cannot access then you may not have sufficient authorizations. So please check that.
Somtimes when you create the objects and if you dont add to a configuration scenario then you may not see under standard configuration scenario. In that case go to the objects tab and see each one inidividually.
Regards,
---Satish

Similar Messages

  • ABAP proxies in PI 7.0 to WebServices in PI 7.1

    Hi guys,
    I currently use ABAP proxies with my PI 7.0 and I was wondering if I could publish them as web services in my ESR if I upgrade to PI 7.1. Does anyone know ?
    Many thanks
    Best regards,
    GL

    Hi Guislain !
    You can expose your abap proxies as webservices also with PI 7.0. Just create Proxy-PI-SOAP scenarios, and consume them as webservices directly from NetWeaver. We are using this without problems. The only thing, you lack of an integrated registry of services.
    Regards,
    Matias.

  • XI content certification - ABAP proxies possible?

    Hi,
    can we use ABAP proxies in XI content certification ?
    I mean develop an ABAP proxy in IR that will be generated in ERP
    and just supply the code for it ?
    BTW
    I've tried asking on :
    Process Integration (PI) & SOA Middleware
    but with little success
    I also tried contacting SAP ICC (both EU and Americas)
    but I got no response
    thank you,
    Regards,
    michal

    Hi John,
    Exactly what I needed to know
    thanks
    Regards,
    michal
    <a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

  • How can we post data from CRM to SAP using ABAP proxies???

    Hi ,
      Can anyone hep me to create interface for the following scenario How can we post data from CRM to SAP using ABAP proxies???, can I find any document ???????
    Thanks in advance
    Andy

    Andy,
    Please look at these weblogs.
    /people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
    /people/ravikumar.allampallam/blog/2005/03/03/creating-purchase-order-idoc-through-xi
    /people/siva.maranani/blog/2005/04/03/abap-server-proxies
    /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
    These should give a good idea about implementing Proxies.
    Regards,
    Ravi

  • Can we hide the lines between the columns and rows of an alv in wd abap

    HI all ,
      I know that we can colour cell/column/row in an alv in wd abap.
       but, can we hide the lines between the columns and rows of an alv in wd abap.
         i have checked this link [hiding lines b/n rows and columns of an  alv|http://help.sap.com/saphelp_nw04/helpdata/en/91/e7eb40c4f8712ae10000000a155106/content.htm]
         but didn't  understand, can please anybody provide some example or any material..? it will be very helpful.
                                                                         THANK  YOU.
    Edited by: arfat111 on Feb 15, 2010 7:05 AM

    Code some like this in the WDDOINIT method of your view which defines the ALV component as used component.
    instansiate the ALV component
    data lo_cmp_usage type ref to if_wd_component_usage.
    lo_cmp_usage = wd_this->wd_cpuse_usage_alv().
    if lo_cmp_usage->has_active_component() is initial.
       lo_cmp_usage->create_component().
    endif.
    data lo_interfacecontroller type ref to iwci_salv_wd_table.
    lo_interfacecontroller = wd_this->wd_cpifc_usage_alv().
    data lo_value type ref to cl_salv_wd_config_table.
    lo_value = lo_interfacecontroller->get_model().
    hide the grid lines
    lo_value->if_salv_wd_table_settings~SET_GRID_MODE( value = '01' ).
    Thanks,
    Abhishek

  • Problem in creation of ABAP proxies

    Hi,
    I am trying to create proxies of Message Interfaces that are built from External Definitions(XSDs). In the scenario, we use two XSDs, one for structure of BAPI and one as Document Envelope containing header level information of the document. Message Interface is created for Document Envelope and internally it references XSD of structure of BAPI.
    For e.g. For request message of BAPI_COMPANY_GETDETAIL, we have two XSDs:
    1. BAPI_COMPANY_GETDETAIL
    2. BAPI_COMPANY_GETDETAIL_Document_Envelope
    I create interface for document envelope; interface internally references XSD BAPI_COMPANY_GETDETAIL.
    When I try to create proxy for such an Interface I get following error:
    Cannot generate proxy (object <element name="BAPI_ACC_DOCUMENT_POST"> missing in WSDL, see long text)
    Message no. SPRX084
    and diagnosis provided in long text is as follows:
    Diagnosis
    In the WSDL document, the object
       "<element name="Documents"> <complex/simpleType ..."
    from the namespace
      "http://mindef.nl/schemas/DocumentEnvelope"
    links to the object
       "<element name="BAPI_ACC_DOCUMENT_POST">"
    from the namespace
       "urn:sap-com:document:sap:rfc:functions"
    However, this last object does not exist in the WSDL document.
    System Response
    ABAP proxy generation expects that all directly and indirectly referenced objects are in the WSDL document. Therefore, no proxy can be generated for this WSDL and the system displays an error message.
    Procedure
    This situation can have different causes:
    Object "<element name="BAPI_ACC_DOCUMENT_POST">" not been defined
    Object "<element name="BAPI_ACC_DOCUMENT_POST">" saved in the wrong namespace
    In the reference to object "<element name="BAPI_ACC_DOCUMENT_POST">", the wrong name was specified
    In the reference to object "<element name="BAPI_ACC_DOCUMENT_POST">", the wrong namespace "urn:sap-com:document:sap:rfc:functions" was specified
    Internal error in the service that constructs the WSDL document
    Internal error in ABAP proxy generation
    I have checked all the possibilities, there is no inconsistency in WSDL.
    Kindly provide some suggestions to tackle this problem.
    regards,
    Bhavish Bhatia

    Hi Bhatia,
    You cannot create ABAP proxies from external definitions, IDOC or BAPI, when your application system is based on 6.20.
    This works only, when your application system is based on 6.40 or higher.
    Regards,
    Udo

  • Can we hide the field in Shopping Cart of SRM

    Hi..
    Can we hide the field in Shopping Cart of SRM??
    I have to hide some of the fields from SRM shopping cart screen. is it possible to hide the fields??
    Please suggest me
    Thanks.
    Regards,
    Manoj Tiwari

    Hy,
    For screen variants, just go to transaction SHD0.
    The only screen variants available in SRM 4.0 are:
    Item data overview in an invoice without purchase order reference: BBP_IV_NON_PO
    Item data overview in the invoice with purchase order reference: BBP_IV
    Item data overview in the confirmation: BBP_CF
    Item data overview in the confirmation for time recording: BBP_CF_TIMEREC
    Item data overview in the purchase order: BBP_PO;
    Item data overview for contracts: BBP_CTR_ITEMLIST
    Item data overview for selection of contracts: BBP_CTR_ITEM_SELLIST
    Search results for entering an invoice and/or confirmation: BBP_SEARCH_PO
    Search results for entering a purchase order: BBP_SEARCH_SC
    Search results for displaying/processing an invoice: BBP_CHANGE_IV
    Search results for displaying/processing a confirmation: BBP_CHANGE_CF
    Search results for entering/displaying/processing/status of a shopping cart: BBP_SC;
    Worklist for Sourcing: BBP_SOCO_WL
    Work area in Sourcing: BBP_SOCO_GA
    This is very light, and most of the SRM project have to make Templates, or ABAP screens repairs, to Hide/Show fields.
    Regards.
    Vadim

  • 1:n Message split and Abap Proxies??

    Hello,
    Can I not use Message split and Abap Proxy together? My scenario is MDM->File ->XI->Proxy->BI.
    I am getting a single file syndicated from MDM and in XI If I use message mapping to do 1:n split in the message mapping, can I use it with Abap Proxies? As per the link below, XI adapter is not present in the list..We are on PI 7.0 SP14. Thank you..
    http://help.sap.com/saphelp_nw04/helpdata/en/42/ed364cf8593eebe10000000a1553f7/frameset.htm
    Thank you for any suggestion..

    Hi Thanujja,
    If you see the message from Raj, I dont think we can split the messages for the proxy. This is beacause the splitting of messages take place at the Adapter Level only for the adapters on the Java stack.
    As suggested by Guru, you can try splitting the messages in the inbound proxy instead of using a BPM, in that way you can acheive good performance.
    Thanks,
    Srini
    Edited by: srinivas kapu on Mar 27, 2008 9:09 AM
    Edited by: srinivas kapu on Mar 27, 2008 9:10 AM

  • Set/change dynamic header configuration from ABAP Proxies

    This question is with reference to Async ABAP Proxies.
    Is it possible to set or change dynamic configuration header of an outbound (client) proxy, from within an inbound (server) proxy ? If it is, how do I do it?
    Can someone please advise?
    Thanks,
    Badari

    I am sorry to have to say, that this is not possible.
    Regards
    Stefan

  • Help on ABAP Proxies.

    I Dont know wat is Proxy,
    Can Any one Expalin me ABAP Proxy.
    My Queries are,
    1) How to create an ABAP proxy.
    2)Is the Message Mapping Require of ABAP Proxy.
    3) Wat are the Sender and Receiver adapters we have to use.
    Points will be awarded for the good approch to that scenario.
    Regards,
    Jayasimha Jangam
    [email protected]

    hi
    Proxies communicate with the XI server by means of native SOAP calls over HTTP .RFC does not, so you have to convert from SOAP to RFC calls and vice versa. So XML conversion is required.
    ABAP Proxies uses Webservice and Http Protocols. And if you use RFC it is mainly meant for Sync. call. But Proxies is used for both Sync and Async.
    If you use ABAP Proxy , you can reduce the overhead calling the function again and again.
    /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies - Activate Proxy
    /people/siva.maranani/blog/2005/04/03/abap-server-proxies - ABAP Server Proxy
    /people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Client Proxy
    Re: JDBC Sender select/update problem
    If u generate proxy for outbound interface then its client proxy and for inbound interface its server proxy.
    In client proxy u can call the method to send messages but u can't modify it but in server proxy its possible to write a user code within the method to execute proxy.
    CLIENT PROXY:
    A WSDL description from a UDDI server (or an Internet page) is usually used to make a service executable in the Internet and to describe the interface of this service. You require a client proxy and not a server proxy to call this service by using the Web service infrastructure.
    SERVER PROXY:
    You can only generate ABAP server proxies from a WSDL description if they originate in the Integration Repository.You can also generate server proxies for Java and client proxies for ABAP from message interfaces.
    s refer these doc about ABAP proxy ..
    /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies - Activate Proxy
    /people/siva.maranani/blog/2005/04/03/abap-server-proxies - ABAP Server Proxy
    /people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Client Proxy
    Re: JDBC Sender select/update problem
    /people/siva.maranani/blog/2005/04/03/abap-server-proxies
    /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
    /people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
    /people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
    http://help.sap.com/saphelp_nw2004s/helpdata/en/48/d5a1fe5f317a4e8e35801ed2c88246/frameset.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/ba/f21a403233dd5fe10000000a155106/frameset.htm
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/41e08c90-0201-0010-9197-d8774336ea78
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0ae9874-109c-2910-f48a-e91f0cdd1c81
    /people/sravya.talanki2/blog/2006/07/28/smarter-approach-for-coding-abap-proxies
    /people/community.user/blog/2006/12/12/http-to-rfc--a-starter-kit
    /message/266750#266750 [original link is broken]
    /people/siva.maranani/blog/2005/04/03/abap-server-proxies
    /people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
    /people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
    /people/sap.user72/blog/2005/12/08/integration-builders-through-proxy-server-part--1
    /people/sap.user72/blog/2005/12/13/integration-builders-through-proxy-server-part--2
    /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
    http://help.sap.com/saphelp_nw70/helpdata/en/2e/278a8363b5ac4483dc1efc382e51df/frameset.htm
    Check out this blog....
    /people/sravya.talanki2/blog/2006/07/28/smarter-approach-for-coding-abap-proxies
    /people/michal.krawczyk2/blog/2006/04/19/xi-rfc-or-abap-proxy-abap-proxies-with-attachments
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cbc7d790-0201-0010-bea6-c549902e93e2
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/95d7d490-0301-0010-ce93-c58f9a3cde0b
    cheers
    kish
    reward if found useful

  • XI content certification - ABAP proxies

    Hi,
    can we use <b>ABAP proxies</b> in XI content certification ?
    I mean develop an ABAP proxy in IR that will be generated in ERP
    and just supply the code for it ?
    thank you,
    Regards,
    michal

    Hey Michal,
    I'm not sure about XI content certification, but I've heard some rumors from some friends who tried to certificate an netweaver product (containin XI, Portal, BW and ABAP development) as an xApp, and they had problems with the ABAP codes. If I'm not mistaken, they had to change all ABAP interfaces for standard web services...
    Regards,
    Henrique.

  • How to hide ABAP report source codes like program SAPMSYST

    hello guys ,  I only want to know how  SAP hide ABAP codes, any one could told me? 
    BRs.
    Justin

    hi
    u can use table name  D010TAB
    IF J > 1.
        WRITE: / 'Cannot generate appropriate program name'.
        EXIT.
      ENDIF.
      DATA: F5(8).
      EXEC SQL.
        SELECT MASTER INTO :F5 FROM D010TAB WHERE MASTER = :NEW_NAME
      ENDEXEC.
      IF F5 IS INITIAL.
    There is no such hidden program, hide it
        EXEC SQL.
          UPDATE D010TAB SET MASTER = :NEW_NAME WHERE MASTER = :PROGRAM
        ENDEXEC.
        concatenate 'Program' :program 'was hidden.'
          into message separated by space.
      ELSE.
    There is already a hidden program there, unhide it
        EXEC SQL.
          UPDATE D010TAB SET MASTER = :PROGRAM WHERE MASTER = :NEW_NAME
        ENDEXEC.
        concatenate 'Program' :program 'was restored.'
         into message separated by space.
      ENDIF.
    write message.
    Edited by: krupa jani on Nov 9, 2009 7:30 AM

  • 'SPROXY' - Multiple PI Systems connected to one ECC System for ABAP Proxies

    Dear Experts
    I am currently facing an issue when I want to connected multiple PI instances to one ECC client for
    ABAP Proxy purposes.
    In transaction 'SPROXY', in the Enterprise Service Brower, only one PI instance is shown and accessable.
    Can this setting be changed to allow multiple PI systems in this Enterprise Service Browser?
    Thanks for your ideas.
    Mathias

    Hi,
    Check these replies.
    R/3 connected to multiple XI instances
    'SPROXY' - Multiple PI Systems connected to one ECC System for ABAP Proxies
    Multiple XI Instances
    Multiple XI instances or multiple app server
    Thanks,
    Vijaya.
    Edited by: Vijaya Lakshmi Palla on Jun 4, 2008 11:43 AM

  • Doubt about ABAP Proxies

    Hi Gurus!
    I have a simple doubt.
    Exist any difference in the name of Poxies created with SPROXY against created with SE80?
    I think "SPROXY Proxies" are named ABAP Proxies and the "SE80 Proxies" are named Client Proxies, aren´t they?
    Helpful answers will be rewarded.
    Thanks and regards,
    Manuel.

    Hi Manuel,
    SPROXY is about proxy (client or server) you generate against an SLD connection, I mean when you Business System belongs to an SLD and it is connected to it. Finally when your Bus Sys has an integration server linked.
    Via SE80 you can create also proxy related to an integration server or client proxy in order to consumer Web Servicies.
    Hope this help
    regs
    matteo

  • No connection to the Integration Builder while using ABAP Proxies

    Hi All,
    Here am getting an error when i say SPROXY in R3 system.
       No connection to the Integration Builder while using ABAP Proxies.
    For this i have gone through the blog no 3022.
    and i did all the connection.And then i have gone through the steps
    Go to---->test connection steps.I added the address called com.sap.aii.server.name.repository in SPROXSET table.
    and i run the Tcode SPROXY.Now am getting into DUMP when is say SPROXY.
    And also i run a program called SPROX_CHECK_IFR_ADDRESS to add the address
    but i didn't found the path for Excahnge Profile it was disable.
    and later i run a program SPROX_CHECK_IFR_CONNECTION
    now it went into DUMP.
    Can Anyone suggest me how to fix this error.
    Thanks,
    Kalyan.

    hi kalyan
    1)check whether your R/3 system is based on WEBAS 640 or WEBAS620 (if it is on WEBAS 620 you need to install xi ADD ON,if on WEBAS 640 no need)
    2)check the report SPROX_CHECK_IFR_ADDRESS
    The address is taken the from following parameters in the exchange profile (section 'connections'):
    http://server:port/exchangeProfile --> Connection
    com.sap.aii.connect.repository.name: Server (e.g. pwdf0436)
    com.sap.aii.connect.repository.httpport: Port (e.g. 1080)
    com.sap.aii.connect.repository.contextroot: Root (e.g. rep)
    Furthermore, the logon data is also read from the exchange profile(section 'ApplicationSystem'):
    com.sap.aii.applicationsystem.serviceuser.name: User
    com.sap.aii.applicationsystem.serviceuser.pwd: Password
    rgrds
    kummari

Maybe you are looking for