Can we install XI3.0 SR1 on a NON-UNICODE SAP ABAP + Java System

Hello,
I am trying to install XI 3.0 SR1 but i don't have an UNICODE SAP ABAP + Java System. So my question is, that is it possible to install XI on a NON-UNICODE SAP ABAP + JAVA Syatem?

Xi 3.0 is an non unicode system, so i guess you can start installing the Xi3.0.....
might be helpfull
https://websmp201.sap-ag.de/unicode.
Message was edited by:
        Nisar Khan

Similar Messages

  • SIK Transport files and None unicode SAP system

    Dear all,
    I have a question about SIK Transport files.
    As you know, when we install BOE SIK,we need transport some files into SAP system.
    There is  a TXT file for describing how to use SIK transport files in SAP system.
    I found that there is no detail about none unicode SAP system in this TXT file.
    All of them is about unicode.
    If your SAP system is running on a BASIS system earlier than 6.20, you must use the files listed below:
    (These files are ANSI.)
    Open SQL Connectivity transport (K900084.r22 and R900084.r22)
    Info Set Connectivity transport (K900085.r22 and R900085.r22)
    Row-level Security Definition transport (K900086.r22 and R900086.r22)
    Cluster Definition transport (K900093.r22 and R900093.r22)
    Authentication Helpers transport (K900088.r22 and R900088.r22)
    If your SAP system is running on a 6.20 BASIS system or later, you must use the files listed below:
    (These files are Unicode enabled.)
    Open SQL Connectivity transport (K900574.r21 and R900574.r21)
    Info Set Connectivity transport (K900575.r21 and R900575.r21)
    Row-level Security Definition transport (K900576.r21 and R900576.r21)
    Cluster Definition transport (K900585.r21 and R900585.r21)
    Authentication Helpers transport (K900578.r21 and R900578.r21)
    The following files must be used on an SAP BW system:
    (These files are Unicode enabled.)
    Content Administration transport (K900579.r21 and R900579.r21)
    Personalization transport (K900580.r21 and R900580.r21)
    MDX Query Connectivity transport (K900581.r21 and R900581.r21)
    ODS Connectivity transport (K900582.r21 and R900582.r21)
    If our SAP BASIS system  is beyond 6.20,but iit is not unicode system.
    Could we use these transport files to none unicode SAP system ?
    Thanks!
    Wayne

    Hi Wayne,
    the text and the installation guide is clearly advising based on the version of your underlying BASIS system and differentiates 620 or 640 and higher.
    so based on the fact that you system is a BI 7 system you are in the category of a 640 (or higher) basis system and therefore you have to use the Unicode ENABLED transports.
    ingo

  • Can't Install Boot Camp 3.0 on 64-bit Windows 7 system

    I have 64-bit Windows 7 Ultimate running on HD#2 on a Mac Pro 2,1 system (2006). I've installed the Boot Camp 2.0 drivers after I installed Windows, I forget why I needed them, maybe for an old Apple keyboard.
    Anyway, I can't install Boot Camp 3.0 from the Snow Leopard DVD - the installation runs to completion, but generates various error messages, one of which says that Boot Camp 3.0 64-bit can't be installed on this system.
    I really need 3.1 now because my Magic Mouse won't work, and I can't sync Mobile Me.
    Is there a fix or a workaround to upgrade Boot Camp on this system? Should I use Windows Uninstall to get rid of Boot Camp 2.0 first?
    If it matters, Windows 7 is the upgrade version from Vista Ultimate.

    http://www.apple.com/support/bootcamp/
    Click on "Downloads", (underneath the big hard drive icon), scroll down a bit and there is a link for "Boot Camp:Upgrading to Windows 7" and another link for Version 3.1 which you need for 64 bit to work right after 10.6.4(?). I would just try downloading the Boot Camp 64bit 3.1 file and try that first if you already have Window's 64 bit installed.
    Don't forget you need a WIRED keyboard AND mouse if you need to reinstall Window's.
    Here's another link that is all over the place on which machines and which Windows works and what doesn't...
    http://support.apple.com/kb/HT1846
    Hope that helped.....

  • Can I install Calendar Server on another partition other than root file system

    Can I install Calendar Server on another partition other than / ?
    <P>
    In this version, the default path is hard coded to install in
    /users/unison. However, if you do not have enough room on your root
    partition or choose to install it in another location, you can do so
    using a logical link. The installation guide explains this as well.
    <P>
    For example, suppose you want /users/unison, which must NOT already
    exist, to be logically linked to /var/opt/unison, which must exist.
    Then as root user:
    <P>
    <UL>
    <LI>
    Create the directory /users (if it does not already exist)
    <P>
    % mkdir /users
    <P>
    <LI>
    Create the logical link. The directory /users/unison must
    NOT exist before doing this.
    <P>
    % ln -s /var/opt/unison /users/unison
    </UL>
    <P>
    <P>

    makes a lot of sense.  I am looking for an answer myself.  My documents folder long ago outgrew it's place on the boot drive.  It would be nice to keep it in the user folder organized on another disc

  • Can't install netbeans 8 on windows 7 ultimate 32 bit (Java Platform SE binary has stopped working), problem event name : BEX

    I can't install netbeans 8 on my windows  7 ultimate 32 bit. Please help me.. This is the error message :
    Java Platform SE binary has stopped working
    Problem signature:
      Problem Event Name:    BEX
      Application Name:    java.exe
      Application Version:    8.0.5.13
      Application Timestamp:    53280287
      Fault Module Name:    StackHash_2264
      Fault Module Version:    0.0.0.0
      Fault Module Timestamp:    00000000
      Exception Offset:    00000040
      Exception Code:    c0000005
      Exception Data:    00000008
      OS Version:    6.1.7600.2.0.0.256.1
      Locale ID:    1033
      Additional Information 1:    2264
      Additional Information 2:    2264db07e74365624c50317d7b856ae9
      Additional Information 3:    875f
      Additional Information 4:    875fa2ef9d2bdca96466e8af55d1ae6e
    Read our privacy statement online:
      http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
      C:\Windows\system32\en-US\erofflps.txt

    1. I had similar problem and upgrade of BIOS has helped.
    2. Try Oracle support forum if 1 does not help.
    Rgds
    Milos

  • Target system install problem (SAPINST searching for Non unicode kernel)

    Hi,
    I'm currently performing a unicode conversion (from 4.7 to EHP4). I am finished with the upgrade and I'm now in the unicode conversion part.
    I have completed the export and selected unicode as the target system. I am done with source system uninstallation and I'm now installing the unicode target system.  I have selected unicode during the parameter selection (it's the default option anyway) but during the part where it will ask for the kernel DVD, it doesn't accept the path of my unicode kernel (and instead looks for the non-unicode kernel) 

    Hi Markus,
    Thanks for your response. This problem is now resolved. It turns out that there are some remaining files from the old /usr/sap/<> and /sapmnt/SID/exe that were not deleted yet (after uninstalling for non unicode system). I proceeded to delete again these files and ensure that there are no files from the non unicode system

  • Can I install 8.5.1 modules on a LABVIEW 8.5 system

    Can I install 8.5.1 modules especially ARM module on a LABVIEW 8.5 system ...
    Since 8.5.1 is just a minor upgrade to 8.5 I guess it should do ..
    But does it work effectively while importing code to  ARM processor

    Hi Bharath,
    No, it's not a good ideal to install an 8.5.1 module on LabVIEW 8.5.  It may function, but chances are that it won't.  The versions should match exactly.
    You will want to upgrade your LabVIEW to 8.5.1 before installed the LabVIEW Embedded Module for ARM Microcontrollers.  (Of course, you are welcome to try, but I suspect that you will get an installation error.)
    Kevin S.
    Applications Engineer
    National Instruments

  • Can't install i-tunes....problem says...system not modified.....not privileges to access this directory

    I had to uninstall my iTunes.....Can't install again...tried 3 times and each time messages read:  1.  Systam has not been modified.  2. Installer has insufficient privilages to access this directory; C:\Program Files\iTunes  3. Log on as administrator or contact your administrator
    Thanks.  Jankeys

    It appears that your user account on your Windows machine is not the system administrator. You are using a limited account most likely.
    iTunes will have some issues if used under a limited account.
    Go into: Start > Control Panel > Users
         See which account is listed as the system administrator. Login to that account and you can promote your main account to system admin from there. Restart your computer if this worked.
    If there isn't a system admin listed, there may be parental control software installed preventing you from accessing these settings.
    Try installing any other program. (web browsers are good to try cause they are free)
    If you are denied access to installing other programs, your user account is not system admin.

  • Can I install creative cloud on both sides of a duel operating system on the same computer?

    I bought a new computer for editing, I have one side of my duel operating system Apple OS x and Windows 8.1 pro, can I install creative cloud on both with one subscription?

    Beauman12345 yes you can.  For additional information please see Activation & deactivation help - http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html.

  • HT201317 how can i install icloud on my mac with IOS 10.6.8 system software ?

    I have a new iPhone 5S with iOS 7.0.3 software and with icloud now installed and backed up. I want to install icloud on my iMac with IOS 10.6.8 system software. No icloud exist under system preferences !

    Apple - iCloud - Learn how to set up iCloud on all your devices.
    Kubilaynevay wrote:
    I want to install icloud on my iMac with IOS 10.6.8
     Sorry... you cannot.
    However... Once you have iClound Established on your iPhone... you will be able to use your Computer to access iCloud at iCloud.com.

  • How to read a Unicode text file in a non-unicode SAP system

    I'm currently has a text file which is saved as UTF-8 format. And inside this file has Thai characters.
    However, my SAP system is a non-unicode system.
    When I use the code
    open dataset DSN for output in TEXT MODE encoding UTF-8
    the thai characters become some funny characters.
    How can I solve this in the ABAP program without changing the system from non-unicode to unicode system?

    Hi Eswar,
       How can I check whether the code page for THAI already installed or not in SAP system?
       Here is the code I use to test to read a file that saved as UTF-8.
    DATA: l_filepath         TYPE string.
    DATA : BEGIN OF l_filepath_str OCCURS 0,
                 comm(1000)  TYPE c,
               END OF l_filepath_str.
    DATA: l_datasetsucc LIKE rlgrap-filename.
    l_filepath = '/BAAC/Files/APP_.txt'.
    OPEN DATASET l_filepath FOR INPUT IN TEXT MODE ENCODING UTF-8.
    IF sy-subrc EQ 0.
      DO.
        CLEAR l_filepath_str.
        READ DATASET l_filepath INTO l_filepath_str.
        IF sy-subrc EQ 0.
          APPEND l_filepath_str.
        ELSE.
          EXIT.
        ENDIF.
      ENDDO.
    ELSE.
      WRITE:/ 'Error reading from file:', sy-subrc.
    ENDIF.
    CLOSE DATASET l_filepath.
    LOOP AT l_filepath_str.
      WRITE: / l_filepath_str-comm.
    ENDLOOP.
        It returns me a runtime error. Any idea?

  • How to check for Unicode/Non-Unicode SAP?

    Hi All,
    Please let me know how can I check whether an SAP system is a Unicode/Non-Unicode from SAP GUI?
    Thanks in advance,
    Adarsh

    Hi,
    You can check under menu :
    System -> Status -> SAP System Data -> Unicode System -> Yes/ No

  • Is it possible to Install Net weaver 7.3  as  Dual Stack (ABAP +JAVA+EP+BI)

    Hi All,
    I am trying to install the NW 7.3 as Abap+Java stack, But I could not find any option to install as dual stack.
    If any one Know the solution, please inform to me.
    Thank you very much in Advance.
    Regards,
    Amar.

    > But you can install PI, and then deploy all the other SCAs with JSPM.
    ...and on the first upgrade/EHP installation the system will be hosed because the tools don't support dual stacks.
    Markus

  • Cannot locate Non-Unicode SAP RFCSDK 6.20

    Hi,
    I downloaded saprfc-1.4.1-5.2.2 and Installed PHP 5.2.2, I then went to download on-Unicode SAP RFCSDK 6.20 for my platform (Windows XP, or I can use 2000/2003 server 32bit if I need to)
    So I went to download SAP RFC SDK but its not there ?!?
    Support Packages and Patches - My Company's Application Components- SAP WEB AS - SAP WEB AS 6.20 - SAP RFC SDK>)   "No Data Available"
    Under 6.40 I can see some exist but only for IA64 etc and the saprfc php connector notes tell me to use 6.20.  Did anybody else have this problem? Can somebody do me a favour and e-mail me this file?
    Many thanks
    Rob
    rob.arundel AT freecom.com

    Hi Again,
    I have SAP GUI 6.40 installed on my PC and so it seems I did not need the SDK, its all working now;o)
    Now that testing has worked I am now planning on doing this from a Linux box without the GUI installed so will I now need the SDK? Where can it be obtained from?
    Many thanks
    Rob

  • I can't install flash player with a non-administrative user

    Hi,
    in my job, we've just rebuild a server, with a clean Windows
    2003 installation, all users are working with Terminal Server. The
    problem is that we are unable to install Flash player in IE7 on a
    user who have no administrative permissions but it works fine
    firefox. It gives the following error (translate from spanish to
    english ): "Error to copy Erma.inf. It's impossinle to copy this
    file to the destination folder".
    So far, we give permissions to all users in
    C:\windows\system32\Macromed
    Any idea?
    Thanks for all

    Hi G K,
    Flash Player is not supported on any mobile device.
    Maria

Maybe you are looking for

  • Mac-formatted FAT32 external drive: cannot read with windows

    I'm posting here in the hopes that it's a mac problem. I have 2 external drives, each USB and each very large (120+GB each). both contain a few files larger than 4 GB each. I formatted each drive using my Mac, one in Leopard and one previously in Tig

  • When I open new tabs it is an AOL tab. I have Fire F as my homepage? How do I change this?

    I set my home page to mozilla or yahoo, but when I open new tabs it keeps bringing up AOL search engine. I don't want this b/c it is useless and always brings up irrelevant search results. How do I change what tabs open up after homepage is set?

  • HT2242 How to change the country of my iTunes on my iPod

    I changed my iTunes to Finnish so I could look at an album that I wanted and that they currently didn't have in the us store so it asked me if I wanted to change it and I said yes. I did this on my iPod touch fourth generation. The numbers are all in

  • DisAssembling  a PDF based on a text string on the page

    I am looking for some guidance (and an example if at all possible) on how to disassemble a multipage pdf based on text like "Tax ID" contained on certain pages. The result is that I am looking to break up a document that contains 1000 pages, 100 of t

  • Final Cut Studio 2-Error Installing

    Hi, I insert the Disk and after a minute I get the following message: "There were errors installing the software" Previously I had FInal Cut Express which was removed. I noticed instead of an install I am getting an "upgrade" when installing? Any adv