Can we Transport 3.x DataSource in Dev Systm to 7.0 DS in Testing Systm?

I have a Data Source 2lis_02_itm in Development system in 3.x.
The same data source is there in testing system in 7.0 version.
Can I create a  transport request for the DS from deveolpment to testing. Will there be any issues?
The Datasource is inactive in test systm and 'activate icon' is disabled; that is the reason iam creating a transport from devlpmnt.

Hi,
It won't have any impact. You can do transport.
Let me know once you did.
Reg
Pra

Similar Messages

  • Two nodes under Transport Request for Datasources

    Hi all,
    I need to transport 3.x DataSource  from DEV to PROD.
    Using TRANSPORT CONNECTIONS I have added all required Datasources in my transport request.
    In SE10 I can see 2 nodes under my transport request.
    DataSource Replica
    DataSource (Active Version)
    All Datasources are shown in DataSource Replica but a few of them (not sure why) in DataSource (Active Version).
    I wanted to know the if this is the right way to transport ???
    Will it result in an error while transporting to PROD ???
    Please help me in clearing my doubts.
    Regards
    Shalabh

    Hi,
    U need to transport the Data source replica as well when ever u transport ur DS for the first time.. along with the ur DS...
    So make sure that u have collected IS, DS, DS replica, TR, UR, IO if any and targets.
    Thanks
    Assign points if this helps

  • Transports from PRD to QAS & DEV in SEM?

    Hi,
    I am in a strange situation. we are on BW 3.0B and SEM 3.1B. For some reasons, My predecessor who worked b4 me implemented SEM planning without DEV system and without transports.
    I've been told that they are not developing any thing in DEV system rather they are developing and testing in QAS. once it is done, they make the same changes manually in PRD without transports.
    they are doing this only for SEM planning. for BW, they are using DEV-QAS-PRD landscape and even transports.
    I'm not even sure what to ask. but, I need to start from here. any suggestions would be highly appreciated.
    Now, I need to start using DEV system for SEM planning as well just like for BW. but, PRD is already running.
    can we transport PRD objects back to DEV and QAS?
    once transported, can i start development in DEV and transport developed objects to QAS and then to PRD?
    if we can, what are the precautions we need to take b4 transporting from PRD to QAS & DEV?
    Is there a way, to find out the differences between "PRD and QAS" and "PRD and DEV" to make changes manually for small changes?
    if nothing is being done, atleast what i can start with to use "landscape DEV->QAS->PRD and transports" by keeping PRD objects alive and running.
    DEV is no where close in synchronous with QAS and PRD. there are quite a bit of differences between QAS and PRD but almost synchronous.
    I'm in a big need of help.
    any kinda ideas are welcome

    Hi,
    I am in a strange situation. we are on BW 3.0B and SEM 3.1B. For some reasons, My predecessor who worked b4 me implemented SEM planning without DEV system and without transports.
    I've been told that they are not developing any thing in DEV system rather they are developing and testing in QAS. once it is done, they make the same changes manually in PRD without transports.
    they are doing this only for SEM planning. for BW, they are using DEV-QAS-PRD landscape and even transports.
    I'm not even sure what to ask. but, I need to start from here. any suggestions would be highly appreciated.
    Now, I need to start using DEV system for SEM planning as well just like for BW. but, PRD is already running.
    can we transport PRD objects back to DEV and QAS?
    once transported, can i start development in DEV and transport developed objects to QAS and then to PRD?
    if we can, what are the precautions we need to take b4 transporting from PRD to QAS & DEV?
    Is there a way, to find out the differences between "PRD and QAS" and "PRD and DEV" to make changes manually for small changes?
    if nothing is being done, atleast what i can start with to use "landscape DEV->QAS->PRD and transports" by keeping PRD objects alive and running.
    DEV is no where close in synchronous with QAS and PRD. there are quite a bit of differences between QAS and PRD but almost synchronous.
    I'm in a big need of help.
    any kinda ideas are welcome

  • Can we transport Data mart data sources?

    Hello Experts,
    I have question on Data Marts.
    Can we transport Data mart data sources? If yes how is it differant from BW transport process?
    Thanks a lot
    Padma

    Hi,
    You can't transport data mart datasources. You have to regenerate them in every system.
    Cheers,
    Kedar

  • Transporting active version of datasource from DEV to PRD

    Hi,
    When I transport a 3.x datasource from DEV to PRD, the version I am getting in PRD is 'modified'. In DEV we have both modified and active versions and there's no difference between them. When I try to activate the modified version, it says that I have to maintain the transfer rules associated with the datasource. Then it takes me to the transfer rules display but I am not sure what to do next...how to activate the datasource. How do I get the active version from DEV to PRD?
    Thanks

    Hi,
    Pls Refer this link for details about transporting BI Objects
    http://help.sap.com/saphelp_nw04s/helpdata/en/0b/5ee7377a98c17fe10000009b38f842/frameset.htm
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/224381ad-0701-0010-dcb5-d74236082bff
    Hope this helps,
    Regards
    CSM Reddy

  • Once we make the configuration in dev syst. how can we transport it to othe

    hi,
    once we make the configuration(functional) in dev syst. how can we transport it to other system like qai or prd system. typically we do it in technical using se09 or se10.for abap requests.
    thnaks for u r help.

    Hello,
    It is the same process as u do in development requests.
    But i request u sit with y'r Basis admin and ask him what are the clients are available in the DEV system, he will tell you what are the client numbers, and whether it is development  or customizing etc.
    For development work you have to do it in respective development client. And customizing , u have to do it customizing client.
    And for testing also , ask your admin, that under which client u have to test.
    And finally to Production.
    I hope this will help you !!
    Note: Points always encourage me to reply !!

  • I want to transport 3 datasource can i transport at a time 3 datasources

    hai
    i want to transport 3 datasources can i transport 3 datasources at a time otherwise  transport one by one. If  transport 1 by 1 u can give same package and transport request
    Thanks
    ravindra

    Hi Ravindra
    Can you just make all the Data source under a single transport request and releas
    that particular TR from Se01 and right click on the Tr u will get an option for relase
    and chek the DS wether they are transported or not once its done then transport
    the remaining part like Trules and ODS or CUbe and its update rules Subsequently.
    Regards
    R M K
    Assining points is the only way of saying thanx in SDN ***

  • Hi,how can i transport objects from one server to other like (Dev To Qty)

    Hi Sir/madam,
       Can u explain how can i transport objects from one server to other like (Development To Quality To Production).
    Regards,
    Vishali.

    Hi Vishali,
    Step 1: Collect all Transports(with Packages) in Transports Tab(RSA1)- CTO
    Step 2: Release the subrequests first and then the main request by pressing Truck button
    Step 3: STMS or Customized transactions
    Object Collection In Transports:
    The respective Transports should have the following objects:
    1. Base Objects -
    a. Info Area
    b. Info object catalogs
    c. Info Objects
    2. Info Providers u2013
    a. Info Cubes
    b. Multi Providers
    c. Info Sets
    d. Data Store Objects
    e. Info Cube Aggregates
    3. Transfer Rules u2013
    a. Application Components
    b. Communication Structure
    c. Data Source replica
    d. Info Packages
    e. Transfer Rules
    f. Transformations
    g. Info Source Transaction data
    h. Transfer Structure
    i. Data sources (Active version)
    j. Routines & BW Formulas used in the Transfer routines
    k. Extract Structures
    l. (Note) If the transfer structures and related objects are being transferred without preceding
    Base Objects transport (e.g. while fixing an error) it is safer to transport the related Info
    Objects as well.
    4. Update Rules u2013
    a. Update rules
    b. Routines and formulas used in Update rules
    c. DTPs
    5. Process Chains u2013
    a. Process Chains
    b. Process Chain Starter
    c. Process Variants
    d. Event u2013 Administration Chains
    6. Report Objects u2013
    a. Reports
    b. Report Objects
    c. Web Templates
    Regards,
    Suman

  • Transportation of Datasouces from BI DEV to BI QAS

    Hi all,
             We have been facing some troubles  while transporting from the BI DEV to BI QAS side .Our R/3 DEV source system is IED200 and R/3 QAS is IED400. I have trasnported all respective datasources from R/3 DEV to R/3 QAS , replicating the same on the BI QAS side.While Transportation of the datasources  from BI DEV, its throwing back and RC=8 error . Its states that the Source System IED200 does not exist. Can you please suggest what is the next step that is to be taken ?

    Dear  Prathibha Pillai,
    Maintain source system conversion in Quality system.
    RSA1 --> Transport Connection --> Conversion(see button)
    Maintain new entry:
    Original Source system     Target Source System
    IED200                             IED400 
    Then re import.
    Hope it Helps
    Srini

  • Extract Structure not Being transported with custom Datasource

    I'm having trouble transporting a custom datasource from BW 3.5 dev to QAS.  The datasource is coming through and showing up in RSA6 but when I click on it I get the following error:
    "The extract structure ZOXDBW0123 of the DataSource ZRSPCTRIGTEXT is invalid
    Message no. R8444
    Diagnosis
    An invalid extract structure has been assigned to the DataSource. An extract structure has to be active in the DDIC. It cannot be a view, since the customer is not able to add append fields for filling in the customer exits to a view."
    Any ideas?
    Thanks,
    Luke

    Thanks for your input.  We managed to get through one of the errors on about the 8th try to transport everything together.  It might of had something to do with the way things were being grouped in the packages.
    So now were just getting an RJ044 Error: "ZRSPCTRIGTEXT: Only tables and views are permitted for extraction". 
    I think it may be some kind of program error after all, cause our basis consultant took a look and couldn't figure it out at all either.  The transport says that everything is going through, but the view were extracting from is still not showing up in QAS.  He suggested we blow everything away and try building the datasource again from scratch.  So if we can't figure it out today we may try that route tomorrow. 
    Anyway, thanks again for all the help.

  • How can I transport data from one client to another client?

    How can I transport data from one client to another client? 
    Regards,
    Subho

    hmmm, CTS = cutomizing transport?
    If you have a customizing table, there are still two possibilities.
    1. customize in DEV system and transport
    2. customize right there where you need it.
    this depends on how the maintainance view is built. If it is a simple customizing table and you get not asked for a TR when customizing a new record or changing an existing one, you hit possibility 2.

  • Can i transport PO Release strategy in a request

    Hi Gurus,
                     I have done po release starategy in dev can i transport the release strategy in a request to quality client or should i do the same setting again in quality server.
    Regards,
    Dheepak

    hI
    1- Release classification is a master data which you can not transport and need to maintain in each client.
    2- Goto Txn -- CL24n in Qly or PRD
    3- Enter release class and class type then enter ,there you will get all your strategies select the strategy you want to maintain and details there you can maintain the values.

  • How can we transport the partner profiles and Port configurations

    Hi everybody,
    How can we transport the partner profiles and Port configurations. While creating these , system will not ask for Dev class and we cant assign any Transport request number. Then How can we transport these settings?
    Your replies are really apreciable.
    Thanks and Regards,
    Vijay.

    Hi,
    please have a look of the OSS note: 182172
    >>
    The partner profiles are stored in the following tables:
    Table EDPP1: General partner profile
    Table EDP12: Partner profile outbound, additional data NAST
    Table EDP13: Partner profile outbound
    Table EDP21: Partner profile inbound
    Table EDIPHONE: Connection to SAP telephony (optional)
    You can use R3TR TABU to manually set the tables into a Customizing request (as of Release 46, into a SYST-type request).
    <<
    Rgd
    Frédéric

  • Process chain transport in BI7.0 from DEV system to PROD system

    Hi experts,
    I have to create a process chain of master data loading, and i have created the process chain in DEV system, now i want the same in the production system, can you please suggest me which way i do
    1) create the same process chain in Production system directly or,
    2) should i transport the same process chain to production system, i created in the development system.
    and please tell me that what kind of problems in future i will face by following the above steps when the project will be in support state.
    thanks in advance for all your expertise experienced help.

    It is always advisable to transport the process  chain from DEV to Production. You can just do this by simply gather all the necessary objects for process chain into your transport.
    During the support phase, you have to monitor the data load through process chain. That can be done via transaction code rspcm. In case there is any error in the process chain ( various errors can be there, data loading error, delta error). In that case you have to go to the step of the process chain when the error occurs (it will be marked as red) , rectify the error and process the step manually at the point so that the following process finishes.
    Hope this is clear now.

  • How to transport an existing infopackage from dev to quality?

    Can anyone pls give me the steps for transporting an existing infopackage from dev to qual?
    I am not finding any infopackage in RSA - TRANSPORT CONNECTION
    Points guranteed.

    Here is the steps:
    1. rsa1->transport connection
    2. left panel choose 'object type', middle panel choose 'infopackage' and 'select objects'. Do a search here with your IP technical name.
    3. then choose your IP and 'transfer'
    4. will go to right panel, choose collection mode 'manual' and grouping only 'necessary objects'
    5. after objects collection finished, create request. Repeat the same steps with grouping 'in dataflow before'
    6. If they are $TMP, then change the package.
    7. When you click the Save on the change package, it will prompt for transport. Here you can provide an existing open transport request number, or if you like here itself you can create a new one.
    8. You can check the request in SE09 to confirm.
    9. If everything is ok, release your request and ask your basis/security guy to move to QA.
    Also you can open your InfoPackage and click on the truck symbol directly from IP window.
    Hope it helps..

Maybe you are looking for