Can we use ALE to send purchase requisition between two systems?
Dear Gurus,
Can we use ALE to send Purchase Requisition between two R/3 systems?
Source system is A. Target system is B. Target system B is the customer of A.
When A wants Material, it will check the availability.
If available, it will create Reservation.
If not available, it will create PR and send it to Target system B. Since B is a customer of A, B will, in turn, create PO and send it to its Vendors.
We plan to use ALE/IDoc. I tried to find out the message type for PR. But it's not available.
Can anyone suggest me how to do that?
Thanks & Regards,
Neeraj K.
Hello,
The technical answer is yes. You could use the message PREQCR / PREQCR01 or PREQCR02 for your requirement of transferring Purchase Request via ALE. Since I am not a process expert, it would not be possible for me to comment on your process needs.
Please let me know if you have further technical queries.
Hope this helps,
Best Regards, Murugesh AS
Similar Messages
-
Can't use Overall Release for Purchase Requisitions
I have two groups, AA and ZZ. Each group has it's own Class.
Group AA uses Cost Center Class (CN) (uses Characteristics Cost Center and Line Amount)
Group ZZ uses Order Class (OC) (uses Characteristic Order)
I have built one and only one Release Strategy for each of these Groups. These Strategies both work successfully when I select the other group to be the group for Overall Release. That is, if I set ZZ to be for Overall Release, then create a requisition, the release strategy for Group AA is applied successfully. However, if I modify the req the strategy for ZZ, does not get applied.
The opposite is true. When AA is set to be for Overall release, then ZZ works. However, if I modify the req, then AA's release strategy does not get applied.
Again, both strategies work correctly when the other Group is set to be the one to use for Overall Release. However, neither strategy works if its group is set to be the one for Overall Release.
What am I missing? I only have two classes, two groups, and two release strategies.SAP Standard system allows only 8 levels of release codes.If client requirement is more than 8 then for excess release codes customisation is done by the technical team (Abapers).Lets take an example of 15 release levels required for a client according to his Business needs then in this case initial 7 codes are customised and remaining 8 release codes are configured in the system.
Release procedure is of two types
Release Procedure without classification
This procedure is applicable only for Purchase Requisitions.
Here PR is released Item by Item only.
Release Procedure with classification
This procedure is applicable to PR,RFQ,Service Entry sheet,RFQ,PO,Contract and scheduling agreements.
Item by Item and Header level releases can be configured
For PR - both item by item and Header level release can be configured
For external purchasing documents - Release is possible only at Header level.
Step 1:
Create Characteristics
In this step we need to create characteristics - conditions to be satisfied for triggering Release startegy.For example client has asked to set release strategy based on 3 inputs.Combination of value, Plant and Purchasing group
1) Total value of PR more than Rs 50,000
create characteristic as "Release_PR_total_value" in transaction code CT04.
Tab - Basic data " Data type --- CURR currency format", "Decimal places - eg. 2 " and "currency eg. INR or USD"
Tab -values key in > 50000 INR
Tab - Additional Data- Table Name "CEBAN" and Field Name "GSWRT"
Tab - Restrictions - class type - 032 - Release strategy
2) Plant
Create characteristic "Release_PR_plant" in transaction code CT04.
Tab - Basic data - Data type - CHAR; Number of chars - 4
Tab - Values - Key in all the plants for which you are required to configure release proc. eg. 1000,2000,3000
Tab - Additional data - Table name CEBAN and Field Name is WERKS.
3) Purchaisng Group
Create characteristic "Release_PR_PurchasingGroup" in TCode CT04
Tab - Basic data - Data Type - char, Number of chars eg. 3
Tab - values - Key in all the purchasing Groups for which Release proc. is to be configured as required by Client.
Tab - Addnl Data - Table Name CEKKO and field name - EKGRP
Step 2:
Define class in transaction code CL02
Menu path SPRO>Materials Mgmt>Purchasing>Purchase Requisition>Release Procedure>Procedure with Classification>Edit classes
Here we assign all the above created Characteristics to a CLASS so that a release strategy to be triggered when all the conditions are met.
Create a new class with free choice of names as "PR_Release_proc" in transaction code CL02.*Key in the class name and select class type as 032 - RELEASE STRATEGY then click on symbol create to enter all the details as mentioned below.
Tab - Basic data - Enter description as "PR_Release-Proc",
status- Released, Same classification - check the push button - Warning Message
Tab- CHAR Enter above created 3 characteristics
1.Release_PR_total_value
2.Release_PR_plant
3.Release_PR_PurchasingGroup
step3:
Menu path is
SPRO>Materials Mgmt>Purchasing>Purchase Requisition>Release Procedure>Procedure with Classification>set up procedure with classification>
here define
1.Release Groups
Release group 01 is used for Purchase requisitions and 02 for Purchase orders.
Here assign class "PR_Release_proc" against release code "01"
check "OvRelPReq" indicator for over all release (All line items )of document in one shot else it will be released line item wise.
2.Release codes
Release codes are assigned to Release groups, in Workflow these release codes are tagged to users' SAP IDs through which they will be able to approve or reject a PR in SBWP(Inbox in SAP Business workplace.
PRs are released by users in transaction code ME54N.
Eg
Type of user - Level - Release code
PR creator - clerk or Business user -
Approver - Supervisor - R1
Approver - Project Lead - R2
Approver - Asst. Manager - R3
Approver - HOD/General Manager - R4
Release codes R1 to R5 are assigned to corresponding users.Manager R4 can only approve the PR if prior approvals till R3 are completed else not in ideal situation.
For detailed info please refer
http://help.sap.com/saphelp_erp60_sp/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm
3. Release Indicator:
Release indicators show the release status of a Purchase Requisition.
For detailed info please refer SAP Help official site
http://help.sap.com/saphelp_erp60_sp/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm
4.Release Pre requisites:
These define the order in which individuals or departments release the PR in sequence.
3.Release strategies
Create a new release startegy eg ."A1" or "U1" , write its description PR release for value >1 lakh
Now select release codes according to the Chart of Authority set by your client.
Eg.
Release startegy " A1 - PR release for value >1 lakh"
R1 - Supervisor
R2- Project Lead
R3- Asst. Manager
R4- General Manager
Now click on" Release Prerequisites "push button and check all the boxes in ascending order.Save the document
click on "Release statuses" push button, check release statuses then click on "Continue" push button.
In third push button you can maintain CLASSIFICATION data or later you can directly mainatain in transaction code CL20N for this strategy.
Classification data for example
1. Value - > 100000
2. Plant - 1000,2000,3000 etc
3. Purchasing groups - 101,102,103 etc
By clicking on "Release Simulation" push button you can check whether release is getting affected for configured release codes or not.
In this way you can configure all the required Release startegies.
Now create a PR in T code ME51N with the above conditions then a new tab will appear in PR creation screen at the time of check.Save the document and this can be released by respective users in TCode ME54N.
Tcode - ME54N - For Individual Release
Tcode - ME55 - For Collective Release
For detailed info please visit SAP HELP website
http://help.sap.com/saphelp_erp60_sp/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm
http://help.sap.com/saphelp_erp60_sp/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm
Regards,
Indranil -
How can I use counters to read the difference between two expernal pulse signals?
I generated a pulse signal and sent it to a sensor which in turn gives me a pulse signal back. I need to read the time from which the sent the signal goes high to the time that the signal is returned. How can I read this? the diagram is attached
Attachments:
Timing_Diagram1.doc 256 KBHello;
The way to accomplish that is by using one of the 660x boards, and configure the counter to do "Edge Separation Method".
That method will increment the counter event count value every time a pulse comes into its source input. The counters only increments between the rising edge of the aux line and the rising edge of the gate. The current value of the counter is read when the counter is finished or an error occurs. You need to wire the out pulse to the AUX line, and the return pulse to the gate line of the counter.
Hope this helps.
Filipe A.
Applications Engineer
National Instruments -
How can I use counters to read the difference between two external pulse signals?
I generated a pulse signal and sent it to a sensor which in turn gives me a pulse signal back. I need to read the time from which the sent the signal goes high to the time that the signal is returned. How can I read this? the diagram is attached
Attachments:
Timing_Diagram1.doc 256 KBThere is vi called "Two Edge Separation Mesurement (NI-TIO).vi". In LV6.1 it is in "c:\...\LabVIEW 6.1\Examples\DAQ\Counter\ni-tio.llb".
Unfortunately this function has no timeout. This means that your program will hang on if there are no pulses. I have attached an improved version of this vi with a timeout(sorry for the french text in the description). There are also some other improvements like the calculation of the edge separation in seconds (not only clock counts).
This function will only work with NI-TIO cards (like 660x).
Attachments:
Two_Edge_Separation_Measurement_with_Timeout_(NI-TIO).vi 103 KB -
I am trying to write a vi that interfaces with a piece of OEM equipment that is set up to talk with a VT 100 terminal. I can't seem to locate the ASCII equivalent string (if there is such a thing) of a CTRL D. Is there a vi that emulates VT 100 commands?
If I recall, CTRL-D is EOF on most ASCII tables.
You'd probably have to use an escape sequence
or if you can use an unsigned 8-bit that might be
easier.
In article <[email protected]>, TLS
wrote:
> How can I use LabVIEW to send the equivalent of a CTRL D (in VT 100
> format) out the serial port of my computer?
>
> I am trying to write a vi that interfaces with a piece of OEM
> equipment that is set up to talk with a VT 100 terminal. I can't seem
> to locate the ASCII equivalent string (if there is such a thing) of a
> CTRL D. Is there a vi that emulates VT 100 commands? -
Workflow API which can be used to avoid sending notification to user
Hi Folks,
We want Workflow API which can be used to avoid sending notification to user for particular type of error.
Say we are using following API which are used to send notification to mailbox as soon as program run into error.
wf_core.context(c_v_package_name
,c_v_func_name2
,p_event.getEventName()
,c_v_task_id_prompt||l_n_task_id
,l_v_msg_data);
wf_event.seterrorinfo(p_event, c_v_result_error);
Now we want to restrict certain type of error to send as a notification however we want to keep this record in wf_notifications table for further investigation.
Thanks and Regards,
Javed KhanMatt,
It looks like another person had a similar question before, see the following thread:
https://supportforums.cisco.com/discussion/9697836/can-use-axl-or-other-api-get-calls-progress
Also, according to the comments seen on that post, I was able to find the JTAPI developers guide, see more information below:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/jtapi_dev/8_6_1/jtapidevguide/overview.html
If this still does not satisfy your question then, the best you can do is post this inquiry on the Cisco Developer Network on the following link:
https://developer.cisco.com/site/devnet/home/index.gsp
Hope this information helps,
Marco Rojas. -
Can i use RHB Now to purchase any app in i tunes
can i use RHB Now to purchase any App in Itunes
Do you have a credit card from them that is one of the types of card that is listed on the payment details screen on your account ? If not then you won't be able to, you can only use the payment types listed on that screen. If it is then try adding the card and see if it's accepted by iTunes - to have a chance of being accepted it will need to be registered to the same name and address as on your iTunes account, and you need to be in the country where the bank is based.
-
Can i use debit card to purchase iphone on apple store?
can i use debit card to purchase iphone on apple store?
hi,thx for the reply but im from malaysia,is there any malaysian people use debit card to purchase stuff at apple store?
-
Can I use debit card for purchasing from iTunes in India?
Can I use debit card for purchasing from iTunes in India?
Hi
There is a small discussion that iTunes takes debit card with a Visa/Mastercard logo. I have no idea what the banking rules are in India. But this may another option to try.
https://discussions.apple.com/thread/3658843?start=0&tstart=0
Cheers -
HT1491 how can I use a song I purchased as a ringtone?
how can I use a song I purchased as a ringtone?
Read here:
https://discussions.apple.com/docs/DOC-3792 -
HT204587 I can't use touch id for purchasing app from iTunes in India
I can't use touch id for purchasing app from iTunes in India
Hi Love Apple,
If you are having issues with using Touch ID for purchases, you may find the following article helpful:
iPhone 5s: Using Touch ID
http://support.apple.com/kb/HT5883
Regards,
- Brenden -
HT203106 Can I use AirDrop to send files from iPhone 5 to my iPad Air 2?
Can I use AirDrop to send files from iPhone 5 to my iPad Air 2?
Yes.
Use AirDrop to wirelessly share content - Apple Support -
Can i use u cash to purchase on i tunes
can i use u cash to purchase on i tunes
you can go anywhere that sells itunes gift cards (target, walmart, 7-11, etc) and buy gift cards with cash there then redeem them on itunes
-
HT204081 Can i use itunes giftcards to purchase ibooks? If so, how?
Can i use itunes giftcards to purchase ibooks? If so, how?
Hi Mystere,
Click on the iBooks app, select Store, and then either search for the book you want or browse the store. You should be able to then purchase a book, and your iTunes credit should be applied first (like any iTunes purchase that has a gift card credit).
Cheers,
GB -
Can I use Itunes credit to purchase an ipad ?
I can't find a definitive answer on the website so I'm bringing the question here. I have a bunch of credit in the itunes store. Can I use that credit to purchase an ipad ?
Thanks for your help.
Amy0hNo, the credit on your account can only be used to buy from the iTunes store (music, films, tv shows etc), the App Store, ibookstore and the Mac App Store - it can't be used to buy from the Apple online or bricks-and-mortar stores.
Maybe you are looking for
-
Can't load website with .jsp - get blank page? Doesn't happen all the time
When I try to open American Eagle Outfitters website, I get a blank page and it will not open. The site is ending in index.jsp. I have 3 computers and it does it sporatically on all 3. ie. 1 may open the website, 2 won't or 2 might open website and 1
-
Orginally to Arch dev but to Newbs too.
Heya all Archlinux users. About me: First I want to let you know that I registered on the forums 2006-10-23. Still this is my first post. I run around 20 Oracle related servers all on solaris, mostly on the new T1 and T2 processors running LDOM (Log
-
Running LR 2.2 in XP32. When I'm in Develop, bringing in images to examine, each image has a several second delay while "loading". I get an immediate preview that's not sharp, then a delay, then the preview sharpens and I can make changes. What shoul
-
Can i watch us store in europe?
I have a movie I want to see which seems to be only available in the US? Can I watch movies using that store? thanks
-
SBL-DAT-00222: An error has occurred creating business component 'Admin SEA
Hello, I am also facing simillar issue. I am trying to create admin account through Siebel Data bean using Business object "Users" and business component "User"; It works from Web client. but fails from siebel databean program. Following is an error