Can XSLT transformation created with XSLT_TOOL be called from outside?
Hello,
I have created an XSLT transformation with the transaction XSLT_TOOL in the ECC 6.0 system.
I got a request if this XSLT transformation can be called from outside SAP, example Informatica Power Center. ( http://www.informatica.com/PRODUCTS_SERVICES/POWERCENTER/Pages/index.aspx )
Can these XSLT be called from outside?
thank you
Koen Van Loocke
Hi,
I don't think you can call the XSLT_TOOL from outside but what you can do is create a transformation and write a function that serves as a wrapper. You can call the function from outside (RFC) and the function could invoke an existing transformation.
Cheers
Similar Messages
-
Can report created with BIP be called from forms?
Hello.
We have many forms.
And now we ned complex reports. With BIP we can create them.
But is there a way to call them from forms, like reports created with Report builder?
Can we transfer parameters from forms to BIP reports, so data can be queried on that form parameters?
Thanks.Hi,
yes, there are several ways you can do this.
DejanH, we discussed at the BI Publisher Forum, here just for the others.
The document you're looking for is here: http://www.oracle.com/technology/products/xml-publisher/docs/Forms_BIP_v21.pdf
or here
http://www.oracle.com/global/de/community/forms/documents/Forms_BIP_v21.pdf
Jan,
it's a new version of the mentioned paper at the OTN-Forms-Side and the old one was removed.
The document describes the way, how to integrate BI Publisher via Web Services into Forms. There are other ways available like
- using HTTP calls via show_document
- using the JavaAPI of BI Publisher and import the needed classes to Forms
Regards
Rainer -
Can position be created with out creating Job..
Hi Experts,
A simple question but quite complicated.
Can position be created with out creating the job. ( yes it will give the warning and create).
Here my actual question comes, what is the need of creating the Job. when we can create position without job in general Scenario.
Is it compulsory to create job whenever we create position.
Your replies are highly appreciated.
Thanks in advance.
Regards,
DolllyHi Dolly,
I definitely aggree with what guru Sikindar mentions.
One more point:
SAP advises to create separate positions for each of the employees in your organizational structure.
For example, there may be a hundred "Engineer" positions in your company (with codes: 50000001, 50000002, ... 50000100).
At this point, when you're asked to take a report of all of the "Engineer"s in your company, then you need to enter all these position codes into the selection screen : Nearly impossible scenario!
However, if you had linked all of these positions to a single job named "Engineer" and numbered "50000000", then you would be able to find all the positions linked to this job and all the employees holding these positions by entering a single object ID and evaluation path in the selection screen of a particular report.
Regards,
Dilek -
Help with seting up a Data Sorce can't be created with non-existent Pool
I am wanting to use an Oracle 9i with WebLogic 7
I have the following in my config.xml:
<JDBCConnectionPool DriverName="oracle.jdbc.driver.OracleDriver"
Name="Thin.Pool" Password="{3DES}C3xDZIWIABA="
Properties="user=SYSTEM" TestTableName="OID"
URL="jdbc:oracle:thin:@localhost:1521:DB_SID"/>
<JDBCDataSource JNDIName="DB_DS" Name="DB_DS" PoolName="Thin.Pool"/>
The console seems happy, no error mesages but in the log I get:
####<Mar 31, 2003 6:33:45 PM MST> <Info> <HTTP> <blue> <GameServe>
<ExecuteThread: '1' for queue: '__weblogic_admin_html_queue'> <kernel
identity> <> <101047>
<[ServletContext(id=4110316,name=console,context-path=/console)]
FileServlet: Using standard I/O>
####<Mar 31, 2003 6:35:37 PM MST> <Info> <JDBC> <blue> <GameServe>
<ExecuteThread: '1' for queue: '__weblogic_admin_html_queue'> <kernel
identity> <> <001082> <Creating Data Source named DB_DS for pool
Thin.Pool>
####<Mar 31, 2003 6:35:37 PM MST> <Error> <JDBC> <blue> <GameServe>
<ExecuteThread: '1' for queue: '__weblogic_admin_html_queue'> <kernel
identity> <> <001059> <Error during Data Source creation:
weblogic.common.ResourceException: DataSource(DB_DS) can't be created
with non-existent Pool (connection or multi) (Thin.Pool)
at weblogic.jdbc.common.internal.JdbcInfo.validateConnectionPool(JdbcInfo.java:127)
at weblogic.jdbc.common.internal.JdbcInfo.startDataSource(JdbcInfo.java:260)
at weblogic.jdbc.common.internal.JDBCService.addDeploymentx(JDBCService.java:293)
at weblogic.jdbc.common.internal.JDBCService.addDeployment(JDBCService.java:270)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:375)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:154)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:732)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:714)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:417)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerImpl.java:952)
at weblogic.management.internal.ConfigurationMBeanImpl.updateConfigMBeans(ConfigurationMBeanImpl.java:578)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:419)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerImpl.java:952)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:470)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:198)
at $Proxy16.addDeployment(Unknown Source)
at weblogic.management.internal.DynamicMBeanImpl.unprotectedUpdateDeployments(DynamicMBeanImpl.java:1784)
at weblogic.management.internal.DynamicMBeanImpl.access$0(DynamicMBeanImpl.java:1737)
at weblogic.management.internal.DynamicMBeanImpl$1.run(DynamicMBeanImpl.java:1715)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:780)
at weblogic.management.internal.DynamicMBeanImpl.updateDeployments(DynamicMBeanImpl.java:1711)
at weblogic.management.internal.DynamicMBeanImpl.setAttribute(DynamicMBeanImpl.java:1035)
at weblogic.management.internal.ConfigurationMBeanImpl.setAttribute(ConfigurationMBeanImpl.java:353)
at com.sun.management.jmx.MBeanServerImpl.setAttribute(MBeanServerImpl.java:1358)
at com.sun.management.jmx.MBeanServerImpl.setAttribute(MBeanServerImpl.java:1333)
at weblogic.management.internal.RemoteMBeanServerImpl.setAttribute(RemoteMBeanServerImpl.java:898)
at weblogic.management.internal.MBeanProxy.setAttribute(MBeanProxy.java:324)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:193)
at $Proxy13.setTargets(Unknown Source)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.console.info.FilteredMBeanAttribute.doSet(FilteredMBeanAttribute.java:92)
at weblogic.management.console.actions.mbean.DoEditMBeanAction.perform(DoEditMBeanAction.java:145)
at weblogic.management.console.actions.internal.ActionServlet.doAction(ActionServlet.java:171)
at weblogic.management.console.actions.internal.ActionServlet.doPost(ActionServlet.java:85)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1058)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:401)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:306)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:5445)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:780)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3105)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2588)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:213)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:189)
Why does it say:
can't be created with non-existent Pool
Thanks,Add "Targets" attribute to the connection pool. You may
get an idea how it looks like by searching config.xml
for "targets". If target servers are not set, the pool won't be
deployed and can not be used to a create datasource.
Regards,
Slava Imeshev
"BBaker" <[email protected]> wrote in message
news:[email protected]...
I am wanting to use an Oracle 9i with WebLogic 7
I have the following in my config.xml:
<JDBCConnectionPool DriverName="oracle.jdbc.driver.OracleDriver"
Name="Thin.Pool" Password="{3DES}C3xDZIWIABA="
Properties="user=SYSTEM" TestTableName="OID"
URL="jdbc:oracle:thin:@localhost:1521:DB_SID"/>
<JDBCDataSource JNDIName="DB_DS" Name="DB_DS" PoolName="Thin.Pool"/>
The console seems happy, no error mesages but in the log I get:
####<Mar 31, 2003 6:33:45 PM MST> <Info> <HTTP> <blue> <GameServe>
<ExecuteThread: '1' for queue: '__weblogic_admin_html_queue'> <kernel
identity> <> <101047>
<[ServletContext(id=4110316,name=console,context-path=/console)]
FileServlet: Using standard I/O>
####<Mar 31, 2003 6:35:37 PM MST> <Info> <JDBC> <blue> <GameServe>
<ExecuteThread: '1' for queue: '__weblogic_admin_html_queue'> <kernel
identity> <> <001082> <Creating Data Source named DB_DS for pool
Thin.Pool>
####<Mar 31, 2003 6:35:37 PM MST> <Error> <JDBC> <blue> <GameServe>
<ExecuteThread: '1' for queue: '__weblogic_admin_html_queue'> <kernel
identity> <> <001059> <Error during Data Source creation:
weblogic.common.ResourceException: DataSource(DB_DS) can't be created
with non-existent Pool (connection or multi) (Thin.Pool)
atweblogic.jdbc.common.internal.JdbcInfo.validateConnectionPool(JdbcInfo.java:
127)
atweblogic.jdbc.common.internal.JdbcInfo.startDataSource(JdbcInfo.java:260)
atweblogic.jdbc.common.internal.JDBCService.addDeploymentx(JDBCService.java:29
3)
atweblogic.jdbc.common.internal.JDBCService.addDeployment(JDBCService.java:270
atweblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentT
arget.java:375)
atweblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentT
arget.java:154)
at java.lang.reflect.Method.invoke(Native Method)
atweblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl
.java:732)
atweblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:7
14)
atweblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBea
nImpl.java:417)
atcom.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
atcom.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
atweblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerI
mpl.java:952)
atweblogic.management.internal.ConfigurationMBeanImpl.updateConfigMBeans(Confi
gurationMBeanImpl.java:578)
atweblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBea
nImpl.java:419)
atcom.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
atcom.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
atweblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerI
mpl.java:952)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:470)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:198)
at $Proxy16.addDeployment(Unknown Source)
atweblogic.management.internal.DynamicMBeanImpl.unprotectedUpdateDeployments(D
ynamicMBeanImpl.java:1784)
atweblogic.management.internal.DynamicMBeanImpl.access$0(DynamicMBeanImpl.java
:1737)
atweblogic.management.internal.DynamicMBeanImpl$1.run(DynamicMBeanImpl.java:17
15)
atweblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManage
r.java:780)
atweblogic.management.internal.DynamicMBeanImpl.updateDeployments(DynamicMBean
Impl.java:1711)
atweblogic.management.internal.DynamicMBeanImpl.setAttribute(DynamicMBeanImpl.
java:1035)
atweblogic.management.internal.ConfigurationMBeanImpl.setAttribute(Configurati
onMBeanImpl.java:353)
atcom.sun.management.jmx.MBeanServerImpl.setAttribute(MBeanServerImpl.java:135
8)
atcom.sun.management.jmx.MBeanServerImpl.setAttribute(MBeanServerImpl.java:133
3)
atweblogic.management.internal.RemoteMBeanServerImpl.setAttribute(RemoteMBeanS
erverImpl.java:898)
atweblogic.management.internal.MBeanProxy.setAttribute(MBeanProxy.java:324)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:193)
at $Proxy13.setTargets(Unknown Source)
at java.lang.reflect.Method.invoke(Native Method)
atweblogic.management.console.info.FilteredMBeanAttribute.doSet(FilteredMBeanA
ttribute.java:92)
atweblogic.management.console.actions.mbean.DoEditMBeanAction.perform(DoEditMB
eanAction.java:145)
atweblogic.management.console.actions.internal.ActionServlet.doAction(ActionSe
rvlet.java:171)
atweblogic.management.console.actions.internal.ActionServlet.doPost(ActionServ
let.java:85)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
atweblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(Servle
tStubImpl.java:1058)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:401)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:306)
atweblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(W
ebAppServletContext.java:5445)
atweblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManage
r.java:780)
atweblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
ntext.java:3105)
atweblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
:2588)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:213)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:189)
Why does it say:
can't be created with non-existent Pool
Thanks, -
Can a video created with Adobe Premiere Elements 13 be converted to run (and be edited, etc.) on Adobe Premiere Elements 11?
I have several hours invested in a video creation that I made with Premiere Elements 13, but now 13 is refusing to work properly (space bar and play button do not move the time line indicator forward). Hopefully, I will get the problem solved, but in the meantime I must get this project completed and don't have time to start over. So, I need to convert the work so that it can be completed with Premiere 11 which seems to work fine.
Thanks, DaveDave
Is this an outdated thread? I thought that you had resolved the play button/space bar issue.
Classically, you cannot open a project created in a later version in an earlier version. If you try, you get hit with "The project appears to be damaged, it cannot be opened." messaged. There was one rare and little known occasion when that was not the case. It involved Premiere Elements 10. So, that is not going to help us any here.
If you still have the play button/space bar issue, can you get out of the 13 project by exporting it to file which you can import into a new Premiere Elements 11 project? If need be, I can suggest the details of that if you tell me the project setting for the 13 project.
Please let us know the situation at this time.
Thank you.
ATR -
Table CI_EEW_CMG_CAT_ATTR_LIS can't be created with package ZZCRM
Hi,
I am trying to add an attribute to category object through EEWB. However, when i complete the EEWB wizard, I get the below error.
"Table CI_EEW_CMG_CAT_ATTR_LIS can't be created with package ZZCRM."
I have verified the setting so of the package zzcrm. I could not find anything wrong.
Please let me know if you have faced this issue before.
Regards,
Manas.Hi,
Go to opportunity table and create a customizing include CI of type cI_eew_orderadm_h and this should solve your problem.
regards,
Murali.Chatna -
How can I turn off the phone saying "Call from" #/name when getting incoming call.
How can I turn off the phone saying "Call from" #/name when getting incoming call before the ring tone starts? I have a LG accolade
I recommend checking your prompts and alerts to turn this feature off. This may be you "Call Connect" or "Readout" alerts. Listed below are steps to update this feature.
With the flip open, press the Voice Command Key (on the left side of the phone).The Voice Commands feature has several settings which allow you to customize how you want to use it. Access Voice Commands, then press the Right Soft Key[Settings]. Your choices are below:
-Confirm Choices--- Automatic/Always Confirm/ Never Confirm
-Sensitivity--- Control the sensitivity as More Sensitive/ Automatic/Less Sensitive
-Adapt Voice ---If the phone often asks you to repeat voice command,train the phone to recognize your voice patterns.Train Words/ Train Digits
Prompts ---Mode/ Audio Playback/Timeout
* For Mode, set Prompts/ Readout+ Alerts/ Readout/ Tones Only.
* For Audio Playback, set Speakerphone or Earpiece.
* For Timeout, set 5 seconds or 10seconds. -
How can i measure BAPI runtime which has called from JAVA
Hi abapers
how can i get run time for BAPI called from JAVA through JCO.
i know that i can use SE30 from ABAP by executing from SAP.
may be ST05 useful for me i did it but when display trace
i am getting big list by seeing this list i am not able to find the runtime for that BAPI.
please any one can explain
reagdrs
rameshHi Ramesh,
Irrespective of whether the call is from an external system or within sap, the bapi will be executed in R/3 only.
So, you can safely measure the runtime using se30 only.
If it is taking more time when called from JCo , then you can be sure that the problem is not with SAP and is actually due to the JCo connectivity with R/3.
Regards,
Ravi -
Can i Match invoices with a currency different from the purchase order curr
Dear Valued Consultant,
Can i Match invoices with a currency different from the purchase order curr
ThanksHi,
As a functionality, Payables will not allow matching an invoice to a purchase order that is in a different currency.
Refer Oracle Public sector payables user guide for 11i (page 4-94).
I understand that there is an enhancement request (3286623) logged for this functionality.
Please refer Note:172291.1
- Thiagu -
Is there a way I can access my iMac with the keyboard only from home screen?
I accidentally turned off my Bluetooth and I tried to reboot my computer. I'm now in kind of a hopeless situation. Is there a way I can access my iMac with the keyboard only from the home screen?
Allow me to rephrase that question. Is there anyway I can I access my iMac from the login screen with the keyboard only?
-
How can we encourage Apple to develop blocking calls from specific numbers?
Looking through posts on here, I see that neither AT&T nor the iPhone itself permits an iPhone owner to block calls from one or more specific numbers.
For some reason, although I've had my mobile number for years, I've recently started to receive daily calls from one specific number, an ignorant person who calls at all times of the day and night, barely apologizing for yet again dialing incorrectly. Very annoying.
Yes, I know I could change my number, but literally hundreds of people have used this number for years, and I'm truly loathe to start over.
In reading posts here and on AT&T, I gather this is not an uncommon problem. I assume that even if AT&T is unwilling to institute call blocking, this is a problem Apple could solve with iPhone software. What's the best way to encourage Apple to include this in a future iPhone software update?
In advance, thanks for your guidance.This would be something ATT would have to do since they provide the actual phone service.
In the meantime, you could create a ringtone of "silence" and assign it to that person's number. This way you wouldn't be disturbed when the person calls until you can work out a solution with ATT. -
WDA app not launched with SSO when called from portal
Hi,
we have configured our systems so that our portal (NW Portal 7.0) is issuing logon tickets and ERP6.0 is receiving them in the backend for single sign-on.
When launching a SAP GUI for Windows transaction (System admin->Support->SAP Application) to test if the SSO is set up correctly, all goes well and I'm able to call e.g. SU01 with logon tickets from the portal.
My problem is that when calling a Web Dynpro for ABAP application in the same backend system from the same portal, I get an error "SSO logon not possible; logon tickets not activated on the server" and need to login manually when starting the application.
When looking at the WDA app URL, I see http://<backend server>.<domain1>.com/... and the portal is sitting on http://<portal server>.<domain2>.com. Could it be a problem if the backend system is in another domain? And if yes, how come the SAP GUI for Windows launch then works (related to an http connection and domain relaxing?)? How to go forward and make it work all right?
Best regards,
MikkoHi Navarro,
Merry Xmas:)
>>We did the same test with the demo app from you (MS)
http://msdn.microsoft.com/en-us/library/windows/apps/hh202967(v=vs.105).aspxand it still don't work. (remember to setup
fast app resume)
Yes, I can reproduce your issue using the official sample.
I think this issue is caused by the mechanism of Fast app resume, please refer to the following reference:
#Fast app resume for Windows Phone 8
http://msdn.microsoft.com/en-us/library/windows/apps/jj735579(v=vs.105).aspx
Quote:
With Fast Resume, when an app is resumed, the system creates a new page instance for the target of the launch point and this page is placed on top of the app’s existing backstack.
This official sample can also help us to understand how it works:
https://code.msdn.microsoft.com/windowsapps/Fast-app-resume-backstack-f16baaa6
We could find that the Application.Launching event will not be triggered if we used Fast app resume, this will affect responding Toast's parameter(Deep Link).
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Delivery get created with one line item from sale ord having two line item
I have an issue when delivery is created with reference to a sales order.
The sale order consist of a header with customer group VBKD-KDGRP = '01'. There are two line item for this header with item 10 having customer group '01' and line item '20' having customer group '02'.
When delivery is created with reference to this sale order the delivery contains only one line item corresponding to line item 10 having customer group '01' of the sale order. But I need to have both the line item in the delivery irrespective of difference in customer group.
What makes this split up of delivery? Is there any configuration or user exit that need to be applied in order to adress this.
<REMOVED BY MODERATOR>
Thanks in advance
Ramachandran Babu
Edited by: Alvaro Tejada Galindo on Jun 13, 2008 5:45 PMCheck if there is any copy routine applied in the copy control from order to delivery - transaction VTLA. The routines themselves can be found in transaction VOFM (Data transfer -> Deliveries). LIKP-ZUKRL field contains the split criteria (by the way, check what's in that field on your deliveries).
It's possible that there is something in the current routine that is forcing the delivery split. Otherwise you can probably use similar approach to make it stop splitting.
Hope this helps. -
NO Links or Associations created with the "Business Components From Tables"
Hello,
I have a strange problem. I'm working on a Fusion Web Applicaiton. In the Model project, I try to create some Business Components from Tables with the help of the provided wizard.
I select one of my IDE Connections, and I choose two of my tables as Entity Objects (*PATIENTS* and COUNTRIES - more details about them bellow), and also as Updatable View Objects. For Read-Only View Objects I select some other tables, afterwards I choose to create a default Application Module, and I press Finish without creating a Business Diagram. Everything works perfectly except of the fact that the wizzard has created everything but the Links and the Associations between my tables.
To be more precise, COUNTRIES is a simple table, only two columns - ID and NAME, and PATIENTS has some columns like ID, NAME, ADDRESS, DATE_OF_ADMISSION, COUNTRY_ID, where COUNTRY_ID is a foreign key to the COUNTRIES table. Both columns, PATIENTS.COUNTRY_ID and COUNTRIES.ID are NUMBERs. I was expectig the wizard to create a Link and a Association for this foreign key constraint I have between this two tables.
On the other hand, following one of the tutorials I've found, *"Developing RIA Web Applications with Oracle ADF"*, I've noticed that when I was creating Business Components from Tables based on the HR schema, all the Links and Associations were created as they were expected. I've also tried to create the same Business Components from Tables in my own project, and all the Links and Associations were in place. Somehow, it's not working for my particular schema (the one that contains PATIENTS and COUNTRIES).
Is there something I do wrong? I've made sure that all the FK constraints are enabled, alive and kicking. From my point of view, the tables are working and behavig as they should, but I can't understand why that feature of automatically creating the Links and Associations works on the HR schema but not on mine.
Please help!
Bogdan.
PS: I am using Oracle JDeveloper Studio Edition Version 11.1.1.1.0, Oracle SQL Developer Version 1.5.5, and Oracle 10g Express Edition installed on localhost.Hello John,
Of course I can post the scripts.
The schema name is "TEST". But you should know that there are some extra columns in the PATIENTS table, I've not mentioned before. As you can tell from the scripts bellow, the PATIENTS table has the following columns: ID (number), NAME (varchar2), COUNTRY (number), GENDER (number), ADMISSIONDATE (date), DIAGNOSTIC (number), FIRSTNAME (varchar2), SALARY (number). There are actually 3 FK constraints, I've only mentioned one for the simplifying the example. The first FK constraint is towards COUNTRIES, the second one is towards GENDERS, and the final one is towards DIAGNOSTICS. All this 3 tables have only two columns (ID as number, and GENDER as varchar2). I will post the scripts for all.
Here is the output of the Export DDL to Clipboard from SQL Developer for the COUNTRIES table:
CREATE TABLE "TEST"."COUNTRIES"
( "ID" NUMBER NOT NULL ENABLE,
"NAME" VARCHAR2(1000 BYTE) NOT NULL ENABLE,
CONSTRAINT "COUNTRIES_UK1" UNIQUE ("NAME")
USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ENABLE,
CONSTRAINT "COUNTRIES_PK" PRIMARY KEY ("ID")
USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ENABLE
) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
CREATE UNIQUE INDEX "TEST"."COUNTRIES_PK" ON "TEST"."COUNTRIES" ("ID")
PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
CREATE UNIQUE INDEX "TEST"."COUNTRIES_UK1" ON "TEST"."COUNTRIES" ("NAME")
PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
CREATE OR REPLACE TRIGGER "TEST"."COUNTRIES_TRG"
BEFORE INSERT ON COUNTRIES
FOR EACH ROW
BEGIN
SELECT COUNTRIES_SEQ.NEXTVAL INTO :NEW.ID FROM DUAL;
END;
ALTER TRIGGER "TEST"."COUNTRIES_TRG" ENABLE;
Here is the same output for the GENDERS table:
CREATE TABLE "TEST"."GENDERS"
( "ID" NUMBER NOT NULL ENABLE,
"NAME" VARCHAR2(50 BYTE) NOT NULL ENABLE,
CONSTRAINT "GENDERS_PK" PRIMARY KEY ("ID")
USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ENABLE,
CONSTRAINT "GENDERS_UK1" UNIQUE ("NAME")
USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ENABLE
) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
CREATE UNIQUE INDEX "TEST"."GENDERS_PK" ON "TEST"."GENDERS" ("ID")
PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
CREATE UNIQUE INDEX "TEST"."GENDERS_UK1" ON "TEST"."GENDERS" ("NAME")
PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
CREATE OR REPLACE TRIGGER "TEST"."GENDERS_TRG"
BEFORE INSERT ON GENDERS
FOR EACH ROW
BEGIN
SELECT GENDERS_SEQ.NEXTVAL INTO :NEW.ID FROM DUAL;
END;
ALTER TRIGGER "TEST"."GENDERS_TRG" ENABLE;
Here is the same output for the DIAGNOSTICS table:
CREATE TABLE "TEST"."DIAGNOSTICS"
( "ID" NUMBER NOT NULL ENABLE,
"NAME" VARCHAR2(1000 BYTE) NOT NULL ENABLE,
CONSTRAINT "DIAGNOSTICS_PK" PRIMARY KEY ("ID")
USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ENABLE,
CONSTRAINT "DIAGNOSTICS_UK1" UNIQUE ("NAME")
USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ENABLE
) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
CREATE UNIQUE INDEX "TEST"."DIAGNOSTICS_PK" ON "TEST"."DIAGNOSTICS" ("ID")
PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
CREATE UNIQUE INDEX "TEST"."DIAGNOSTICS_UK1" ON "TEST"."DIAGNOSTICS" ("NAME")
PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
CREATE OR REPLACE TRIGGER "TEST"."DIAGNOSTICS_TRG"
BEFORE INSERT ON DIAGNOSTICS
FOR EACH ROW
BEGIN
SELECT DIAGNOSTICS_SEQ.NEXTVAL INTO :NEW.ID FROM DUAL;
END;
ALTER TRIGGER "TEST"."DIAGNOSTICS_TRG" ENABLE;
And finally, here is the same output for the PATIENTS table:
CREATE TABLE "TEST"."PATIENTS"
( "ID" NUMBER NOT NULL ENABLE,
"NAME" VARCHAR2(1000 BYTE) NOT NULL ENABLE,
"COUNTRY" NUMBER,
"GENDER" NUMBER,
"ADMISSIONDATE" DATE,
"DIAGNOSTIC" NUMBER,
"FIRSTNAME" VARCHAR2(1000 BYTE),
"SALARY" NUMBER,
CONSTRAINT "PATIENTS_PK" PRIMARY KEY ("ID")
USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ENABLE,
CONSTRAINT "PATIENTS_UK1" UNIQUE ("NAME", "ID")
USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ENABLE,
CONSTRAINT "PATIENTS_GENDERS_FK1" FOREIGN KEY ("GENDER")
REFERENCES "TEST"."GENDERS" ("ID") ENABLE,
CONSTRAINT "PATIENTS_DIAGNOSTICS_FK1" FOREIGN KEY ("DIAGNOSTIC")
REFERENCES "TEST"."DIAGNOSTICS" ("ID") ENABLE,
CONSTRAINT "PATIENTS_COUNTRIES_FK1" FOREIGN KEY ("COUNTRY")
REFERENCES "TEST"."COUNTRIES" ("ID") ENABLE
) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
CREATE INDEX "TEST"."PATIENTS_INDEX1" ON "TEST"."PATIENTS" ("NAME")
PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
CREATE UNIQUE INDEX "TEST"."PATIENTS_PK" ON "TEST"."PATIENTS" ("ID")
PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
CREATE UNIQUE INDEX "TEST"."PATIENTS_UK1" ON "TEST"."PATIENTS" ("NAME", "ID")
PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
CREATE OR REPLACE TRIGGER "TEST"."PATIENTS_TRG"
BEFORE INSERT ON PATIENTS
FOR EACH ROW
BEGIN
SELECT PATIENTS_SEQ.NEXTVAL INTO :NEW.ID FROM DUAL;
END;
ALTER TRIGGER "TEST"."PATIENTS_TRG" ENABLE;
If a complete DB dump would be more helpful, please let me know. I am willing to provide any details.
Thanks for your support. -
Problem with Windows Form called from SAP
I have a simple VB.NET windows form that I'm calling from a new menu click event from within SAP.
The form loads, as expected, when the menu item is clicked, but the form will always load outside of the SAP window and thus cannot be seen by the user unless they see it in their toolbar.
Has anyone run into this in the past? I would normally use the UI-API, but this is a form from another program that can't use the UI-API.
I've also tested this with simple test forms with another test project and get the same results.
Any ideas?
Thanks!This isn't merely a matter of viewing <i>new</i> windows.
When the SBO window is active and in full screen mode and one switches, using the task bar, to another application, more often than not the other application's window won't be displayed, or will be displayed but partially. One has to deactivate and re-activate the second window to see it correctly.
It's the whole bloody SBO graphical engine that's bogus, if you ask me. Talk about reforging <i>that</i> to a profit-oriented company...
@Marc Roussel:
BTW, System.Windows.Forms.Form#ShowDialog() is a blocking method, AFAIK. So the following statements won't be executed ere the "dialog"'s closed.
But this doesn't change the problem. The Activate() and BringToFront() don't help resolve the matter, in my experience. Sometimes the new form will appear on Z-top, sometimes it won't. Or maybe the true problem is that the window <i>is</i> on top, but doesn't get painted.
ADDENDUM:
Come to think of it, it might be worth a try to programmatically iconify/deiconify the new window. Something along the lines of:
Dim f as Form = ...
f.Show()
Application.DoEvents()
f.WindowState = FormWindowState.Minimized
Application.DoEvents()
f.WindowState = FormWindowState.Normal
Application.DoEvents()
(all in System.Windows.Forms Namespace)
Maybe you are looking for
-
Retrieving multiselect values from database
Hi, I have a multiselect list of companies names for a user. An application user can belong to one or more company. The application user gets to see data in the application based on the company/companies that he belongs to. When a user belongs to mor
-
Hello friends, I'm having very basic problems during a import process, I have to import a database from a .dmp file exported from someone else's system to my system. I don´t know the Oracle version that export was generated, but my Oracle version is
-
Hi, I have a simple query that takes a long time and sometimes hangs. I want to know if there are any orders that were shipped but are not in the ra_interface_lines_all table for one reason or another. The query is select source_header_number from ws
-
Country chart of account to comp code
hi experts pls tell me wher we can assign country chart of account to comp code..pl thanks Hima
-
Turn off screen updating while a DIAdem script is executing.
Hello, Does anyone know what line or lines I would add to a DIAdem script to prevent the screen from updating as the script runs? I have tried UIAutoRefreshSet and the similar commands I found in the help file, but my screen still flickers and flash