Can you change default burn output in DVDSP?

Hi All
I got a dual layer external burner (lacie D2) for my G5 dual2 which has a single layer superdrive inside. I encoded the movie file with Compressor, imported the assets to DVDSP and clicked burn as i usually do. DVDSP spits out the superdrive tray and asks for some suitable media to be placed in there, as it normally does.
Q> How can I make DVDSP address the Lacie, when I click burn, instead of the G5 superdrive.?
Cheers
Jamie

A> You can't
Although the drive on the computer opens as usual you should be able to open the external drive, insert a blank DVD, close it and *in theory DVDSP should burn it. OR if you already have a blank DVD in the External drive before you try to burn in DVDSP then when you click burn your internal drive should not even open. If you have a blank DVD in the internal drive and a blank DVD in the External drive then DVDSP will burn a DVD onto the internal drive. I'm not %100 sure but try it out!
Another alternative is to build the DVD in DVDSP and use Toast to format to the external drive. This is the preferred method since you can set the burn speed (DVDSP burns at the highest speed which increases the risk of burning coasters).
Something else you might of wanted to consider is acquiring a Dual-Layer internal drive...

Similar Messages

  • How can you change default persmissions saving files

    Mac OS 10.5.8, intel based Mac Pro
    When I save a file it has the permissions RW RW R.  There is another 10.5.8 non-intel Mac Pro then when they save a file to the destop, it is RW R R.  How do you change the default saving permissions?  I want it always to be RW RW W.

    I found it!
    http://support.apple.com/kb/HT2202
    you need to create /etc/launchd-user.conf at noted in the URl above with umask 022 in it.
    BDAqua - Thanks for the reply.  After I created the file and logged out/ back in, I had to change the permissions on the folder also.

  • Can you change default text reader from TextEdit?

    I use Bean, a great (and free) text editor, and would like to have it open automatically as my default text editor when I click on a text file, rather then TextEdit. Can that be set somewhere? Thanks.

    If it were in Preference in addition to telling the system the application to use you would also have to tell which files you wish to make the change on. This way with File Information pane open, the system alreay knows where to make the change.
    Beside the information about default application is maintained in the metadata for the file and not in preference for Finder. If you think about it that way, you can see that there is some logic to the way Apple does it.
    You are welcome. Glad I could help. Thanks for the star.
    Allam

  • Where in new version (2.0) can you change the audio output port?

    I updated to the new version.  On the older version, I had a selection of audio ports (like my bluetooth headset, or the headphone jack).  This option apparently is not available on the new version or if it is, it is not readily apparent.  Now I have to turn off my headset to change back to headphone output.
    Not friendly.

    They are now controlled via the "Control Center" - swipe up from any screen to find bluetooth and Airplay controls (and some other useful stuff like calculators and torches)

  • Can you change the DEFAULT VIEW of a published iCal to MONTH VIEW?

    Can you change the DEFAULT VIEW of a published iCal to MONTH VIEW? I use this for a vacation rental and people never ever ever ever need to see anything but the MONTH VIEW. I hate having to tell them to click MONTH view at the top of the page. Is there a way to force it to always appear in MONTH? Thanks!

    ddotcom,
    Welcome to Apple Discussions.
    Unfortunately no, but if they are repeat viewers why not tell them to change their view to "Monthly" using the "Preferences" button on that page?
    ;~)

  • Can you change the default font in an iPad mail account?

    I suspect you can't, but just checking: can you change the default font in an iPad mail account?

    There is no way to change the default font in the mail app. You can make the type larger by using the accessibility feature of larger text. Settings>General>Accessibility>Larger Text. There is an app that allows you to add fonts to the iPad, but I do not think this works with the built in iOS apps such as mail.
    You can check it out.
    https://itunes.apple.com/us/app/anyfont/id821560738?mt=8

  • Can you change the default image capture program in RH8?

    Can you change the default image capture program in RH8? I have used Snagit for sooo many years and I would like to use it by clicking the Caputre button.  I know how to change it to edit pictures with Snagit (Tools > Options > Associations), but not to capture.

    Looks like a feature request.
    Please follow this link.
    http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=38
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • How/where can you change the delimiters within the output file -Urgent Pls!

    Hello Experts,
    When Exporting data through EAS, how/where can you change the delimiters within the output file (ie. space delimited vs tab delimited vs custom)
    Thanks in advance.
    Regards,
    Sonu

    This is where I will be shot down in flames but at least in 7.x I am unaware of any configuration option that allows you to export in anything other than space delimited.
    I guess you could write a shell/perl script that could change this outside of Essbase
    Edited by: DrFosterMan on Jan 16, 2009 12:54 PM

  • Can you change and set your own defult midi sync project settings

    Hi All,
    Can you change the default Midi Sync Project Setting so they have your own settings everytime you start up logic Pro X?
    Preferences > Midi > Sync >MIDI sync project settings
    General Default:
    Frame Rate 25 fps
    Check auto detect format of MTC
    Default required:
    Set frame rate to 29.97fps
    check 'auto detect format of MTC'
    check Enable Separate SMPTE View Offset
    MDI Default is:
    MTC and MMC  all unchecked
    Default required:
    Check 'Transmit MTC'
    Check 'Transmit MMC'
    Check 'Listen to MMC Input'
    Any assistance would be appreciated.
    Regards,
               Gavin.

    No, that's not what I typed above.
    The rule is... Preferences are Global, changes made in Preferences affect all Projects.
    "Settings" are on a per song basis.
    In Logic 9 (and I imagine in X as well) there are two main areas to configure Logic.
    1. Is Preferences    Preferences settings are global and affect all projects.
    2. Is Settings          Settings are set for each project, they are not global
    You typed:  Preferences > Midi > Sync >MIDI sync project settings
    See what is says, MIDI Sync Project Settings.
    Preferences has forwarded you into the Settings area so no, the MIDI Sync options are not global, they have to be adjusted for each song, that's why I suggested setting up templates of your most used project setups.

  • Can you change the color of the page?

    Can you change the color of the page using In Design CS5.5 ?
    How?

    Are you intending to print a color onto the page to change the color or perhaps you need a colored background for onscreen output? Or are you planning on printing on already-colored stock?
    For the former, use Scott's suggestion, for the latter edit the Paper swatch.

  • How can you change your security question for I tunes?

    How can you change your security question for I tunes?

    If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then the steps half-way down this page give you a reset link on your account : http://support.apple.com/kb/HT5312
    If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 link above to add a rescue email address for potential future use

  • Can you change the legth of time (or number of rings) it takes for on iphone 4 to time out making an outgonig call?

    Can you change the legth of time (or number of rings) it takes for on iphone 4 to time out making an outgonig call?
    Mostly it's to call in for radio contests. The Iphone is really good at making a quick call, but it seems to timeout after 15-20 rings. I realise this is a small thing, but free tickets is free tickets.
    Most commenst I see is abotu incoling calls, not outging.
    Thanks.

    No. You can't do this with any phone.

  • How many times can you change your iPod if you have insurance

    How many times can you change your iPod if you have insurance

    If you are talking aboutn the Apple warranty, if the iPod is defectve and not abused there is not limit.
    If you have AppleCare+ which covers accidental damage
    two incidents of accidental damage coverage, each subject to a $29 service fee plus applicable tax.1

  • Just uploaded iso7 , . . .hate it!  Can you change background colours?  How do you add a new item/activity to the schedule? In notes the font has changed, can I change it back and the link colour is now yellow instead of blue, can I change it?  Thanks

    Just uploaded iso7 , . . .hate it!  Can you change background colours?  How do you add a new item/activity to the schedule? In notes the font has changed, can I change it back and the link colour is now yellow instead of blue, can I change it?  Yellow on white is harder to read. Thanks

    Another question. How do you bookmark something.  It was so easy before, why did they change it?  Can I uninstall it?

  • How Can You Change the Look and Feel of Charts in OBIEE 11g

    How Can You Change the Look and Feel of Charts in OBIEE 11g?
    Edited by: user11973122 on Jul 18, 2012 12:13 AM

    Check these files
    OFM_HOME\Oracle_BI1\bifoundation\web\msgdb\s_blafp\viewui\chart\dvt-graph-skin.xml
    OFM_HOME\Oracle_BI1\bifoundation\web\msgdb\views\dvtchart\obips.dvtchart.xml
    OFM_HOME\Oracle_BI1\bifoundation\web\display\chartfontmapping.xml
    Pls mark correct or helpful if helps

Maybe you are looking for

  • How to access variables in windows

    Hi, I am new on windows platform. I did work on linux. on linux we makes 2 entries in bash_Profile as ORA_dbENV and ORA_appsENV to set the variables which can be accessed using linux> . $ORA_dbENV linux> cd $ORACLE_HOME\appsutil\scripts\PROD_ltm linu

  • How to change the header text fontFamily of spark DataGrid?

    I use an embed font (Nunito-Light.ttf),  and i can set the font of GridColumn to Nunito-Light in DataGrid , but it seems that it has no effect to the header of DataGrid. and then I create a  headerRenderer for spark DataGrid, and try to set the fontF

  • Hey. My mail will not open. Any suggestions

    Hey all. My mail wont start, and i can't not close my computer, it says that i have to close my mail program first.

  • Hiding certain line items in FBL3N

    Hi, I need to hide certain line items when viewing through TCode FBL3N.... Can this be done? This is just a temporary thing. Pls let me know whether this can be done? Thanks, Maleeq

  • UDF in SAP PI

    Hi Experts, I am writing a UDF for testing purpose which is like this. int ABAPCount = 0,PICount =0; for (int i =0;i<Design.lenght;i++) if(design<i>.equals("ABAP")) ABAPCount++; else if (Design<i>.equals("PI")) PICount++; if(ABAPCount !=0) result.add