Can you edit text after saving your file as pdf

I have recently created a letterhead in Illustrator.
Is there a way to change a person name and title after saving it as a pdf file? I heard something about creating a form in Acrobat professsional.
I need to print out a letterhead with different peoples name and title. Any help would be appreciated. Thank you.

Can you edit the text in Acrobat Reader?
Yes, if you use Acrobat Pro to save the PDF as a Reader-enabled form.
1. Create your letterhead in Illustrator (or whatever). Leave design space for, but do not create text objects that you want to be editable.
2. Save as PDF.
3. Open the PDF in Acrobat Pro. Use Acrobat's Form tools to add text fields whereever you want the end users to be able to key text.
4. Select the Enable Reader Usage Rights command in Acrobat to make the form fields edtiable in Reader. Save the file.
Recipients of the PDF can now open it in Reader, edit the content of the fields, and save the file with their edits.
JET

Similar Messages

  • Can you EDIT a name in your reading list on safari?

    Can you edit the name of an item on your reading list? I know how to delete but not edit. I save a lot of things on the reading list from one site and it names them all the same thing. I am looking for a way to change the names so I can differentiate between them easier.  Thanks.

    No, the reading list entries cannot be edited. The Title and descriptive text are picked up from the attributes of the pages you book mark. You will need to use bookmarks rather than the reading list if you wish to edit it.

  • Editing Text After Saving

    I am working in Premier Elements 9. I have a number of text slides and saved my work. I went to go back to edit some of the text and I am unable to do so. I can only add new text. Is there a way to edit text?
    Thanks!

    You are most welcome.
    PrE's Titler is a surprisingly powerful tool. It does have a few limitations, like alignment grids (has some alignment tick marks), a full zoom, and hyphenation, but it is still very powerful, especially with the use of Styles for its Text and also for its Shapes.
    With Titles, one tripping point for some, is that Titler is used to create Titles, and will place them into the Project Panel for use. One can then have multiple Instances of that Title on the Timeline, and if one makes a change to one of those Instances, or to the Title from the Project Panel, that change will affect all Instances of that Title. Often, this is what one wants, though not always. If you have created a Title, and wish to use variations of that Title, but say with different Text, then you will want to Duplicate that Title, and just edit the Text in each Duplicate. There is a big, and useful difference, between Duplicate Titles and Instances of a Title. Many users do not understand those differences, and become concerned when they edit an Instance of a Title, and cannot understand why that edit affects all other Instances of that Title - that is the way that it is supposed to work. If one needs to edit just one Instance of a Title, they would Duplicate that, make the edit and replace that Instance with the Duplicate.
    Good luck and happy editing,
    Hunt

  • How can you edit video after uploading to ovi

    Is this a big secret? I have looked on the net but ther doesn't seem to be an answer anyehere. surely Nokia offer this, but where is it?

    Can you please provide more information such as
    1. what type of device you are using
    2. what kind of video editing you are looking for
    3.Are you doing a drag and drop of video file to phone
    currently in Nokia ovi suite when you transfer a video from PC to phone, based on the phone type connected if the phone doesn't support direct placback of your input video then the video is edited in the background and then copied to the phone.

  • Can you convert Home Publisher 2000 .php files to PDF?

    I have a customer that submitted a file in Home Publisher 2000 in a .php file.
    Can you convert the file to a PDF so we can print it more easily?

    Provided you have BOTH PDF Pack and Home Publisher 2000. Only someone with the original software can open the file for conversion.

  • Can't edit text in logo .ai file that was provided to me

    Hey guys,
    I had a company create my logo and they sent me the original .ai file. I want to keep the same fonts as the original logo and create a new slogan for business cards. I have two questions, please help..
    1) How can I tell what the exact font is that they are using in the existing logo? They sent me three new fonts to add to my computer to display things correctly. I think they have some fonts outlining others,etc.
    2) Am I able to just open the logo and remove the image and then edit the text in the font and just change the letters? This should keep the font the same but I have not been able to figure out how to edit the text. When I choose the text box it just lets me create new text and not edit the existing.
    Thanks for any help!

    Steve,
    >I assume this is anchor points. Should I be able to change the characters and keep the fonts format the same?
    Yes. no. You may have to start all over again. If you type the same letters with the three fonts, you can compare to see which one(s) was/were used.
    To make sure, you could post an image here.
    Was it the Humble Stumble Company, or sillywilly.com?
    When you have an image on a website (image.extension) on a website (yourdomain.topdomain), you can link to it by copying/writing this into your message (folders are optional, .extension may be .gif, .jpg, etc.):
    <a href="http://www.yourdomain.topdomain/folder1/folder2/.../imagename.extension"><img src="http://www.yourdomain.topdomain/folder1/folder2/.../imagename.extension" alt="" border="0"></a>
    To keep the forum format, please do not post images wider than 680px.
    If you do not have access to a website, you may upload the image to one of the free image hosting sites, such as pixentral.com, photobucket.com, imageshack.com.

  • Can you edit whole audio as one file?

    I have done the bulk of transitions and mixing in final cut and just want to use soundtrack to eliminate some hiss and tiny bit of clean up can i send the audio as a complete file so I dont have to do multitrack and risk messing my mixes and transitions etc?

    I do my complicated audio in Logic Pro, so I don't really understand Soundtrack Pro.
    That said, if you want to apply one effect to the whole sequence in FCP,
    you can nest the sequence:
    1. Edit > Select All
    2. Sequence > Nest (no need to mixdown audio if it's stereo)
    3. Option-click on the nested Audio to open it in the Viewer.
    4. Add your global effects.
    Sweet!
    Nesting is described in the FCS2 manual on page III-416.
    It's a really useful technique. You can go back and
    tweak the original edit, and the nested sequence will update.
    BTW, when mixing digital audio, most folks set it to peak
    around -12dB.
    Note that if you have some clips that are too loud or soft,
    it's best to adjust those clips' volumes, instead of squashing
    the whole mix with a global limiter.
    Finally, the best way to check if your mix levels are even
    is to jump around to different locations of the timeline,
    listening at a low level, making sure you can hear all the elements.
    Sometimes the best way to even things out is to adjust the EQ
    instead of the gain.

  • Can you edit text animation?

    I am trying to edit an animation I applied to text in premiere elements because I want to make it slower. Is there a way to do this?

    If Peru Bob's suggestion does not get you what you need, regarding the Duration of the Titles w/ the animation Presets applied, then there is another method, with much more control, but it does require a bit of "hand-work." You can just Keyframe the Fixed Effect>Motion>Position (removing the animation Presets first), to do the animation over time.
    I more often use this method, due to the greater control, rather than any of the animation Presets, such as Crawl, or Roll. When doing that Keyframing, one can determine exactly the speed of the animation, and can also do things, such as "pause" the animation.
    Good luck,
    Hunt
    PS - Steve Grisetti has a great Learning Series regarding Basic Keyframing on Muvipix.com

  • Can you send text messages by your ipod?

    please help beacuse i have no phone *hehe* so jsut answer the question

    There are apps available in the App store that allows you to sent text messages to phones and other devices. Text+ is one such app. Some apps charge for the texts similar to a phone if you do not send to another device using the same app.
    WIth iOS 5 you can use the Messages app to text to another iOS 5 device.

  • Can you edit the title of downloaded files?

    I am downloading a series of files from autio CDs. They are lanaguage lessons. However, the titles are either wrong for the lesson numbers, or are  untitlted.
    My plan is to put them on my IPhone so I can listen while driving.  I wish to edit the titles so I can go from one to another in order.

    Although my looking solved the problem, it was a right click that showed the info that could be edited. I did not understand what "command+1" meant.

  • Can you sync text messages to your MacBook Pro?

    I have read some archieved answers for backing up messages on your Mac on AD. However, is there a simple app that will let me sync current messages on my iPhone to say, my desktop or even iTunes where I can look at them quickly without running down my iPhone? Just want to sync texts. Everything else syncs fine. Thanks!

    http://www.ecamm.com/mac/phoneview/
    Used it since my first iPhone, well worth the money.

  • How can you save "text to speech" as file?

    Does anyone know how to save "text to speech" as an audio file?

    Hi Lizzy Bee,
    Roger Wilmut has a free Script here...
    http://www.wilmut.webspace.virginmedia.com/notes/speech.html
    Automator instructions...
    http://www.ehow.com/how_2170731_turn-text-file-audiobook-mac.html
    http://automator.us/leopard/examples/ex07/index.html

  • Can anyone help me, I am trying to create courses using Captivate for Udemy, but even after saving the courses as pdf files, Udemy will not reconize them. NOw I am back to square one because according to Udemy techs, they do not support Captivate files.

    Trying to create my courses using Adobe Captivate, but even after saving the files as a pdf it will not upload in Udemy. What can I do?

    Yep, you lose all interactivity when publishing to video.
    Udemy, Lynda.com, Total Training and other similar models are based on simple "watch the video to learn" type of consumption. The only real interactivity you get is an ability to pause, rewind, fast forward. Basically anything you can do with a video.
    Cheers... Rick

  • Text editing  - can you add text editing options on the 'in-browser editing'

    Text editing  - can you add text editing options on the 'in-browser editing' tool?

    You can only replace existing content, not edit the page structure. Refer to the respective help sections.
    Mylenium

  • Can you create apps after 1st May 2015 using Adobe DPS single edition?

    Can you create apps after 1st May 2015 using Adobe DPS single edition?
    I currently have SE via creatieve cloud - one of the only reasons we switched to CC was for the DPS SE.
    Does anyone know if this capability will just be 'switched off' at midnight 1st May 2015?? There are huge costs for going the enterprise route but with no date in sight for Publish to be launched I am not sure I can wait for this, or should I???

    Adobe states: Please note that the Digital Publishing Suite, Single Edition, service will be available for use until May 1, 2015, but beyond that date the service will no longer be available.
    So essentially my licence will expire on 1st May - Adobe's note just mentions 'service' -  even though part of CC and I will not be able to maintain my app or create any more IPA's after 1st May. I can't beleive there is nothing to switch over to other than paying thousands of pounds for enterprise??
    Just all so vauge, feels like a plug is going to be pulled and thats it??? Maybe I am missing something?

Maybe you are looking for

  • Error while running creating repository in OWB

    Hi All, I am facing problem while creation of repositiory in OWB, at 31% OWB repository creation gets failed. Error message is "Process element SeedData.xml" 36% The warehouse builder repository Owner installation failed on user REP_OWNER INS0017: In

  • How to restrict bytes in client_get_file_name (webutil)

    Does someone know how to restrict files in bytes before upload them into the database with webutil? (db10g, forms10g).      l_filename := client_get_file_name(directory_name => :GLOBAL.user_dir ,file_name => null ,file_filter => null ,message => null

  • External Web services in WebDynpro

    hi, We have a requirement of developing an application which uses external web services in web dynpro. Does anybody have any document or link as how to go about. we tried working on that but when creating a Adaptive Web Sertvice Model and giving the

  • Any differences between inner join and join without any keyword(inner join)

    Are there any differences between following two join statements? Join Statement 1: select column1, column2 from table1 t1, table2 t2 where t1.t1Key=t2.t2Key; Join Statement 2: select column1, column2 from table1 t1 inner join table2 t2 on t1.t1Key =

  • Select a single row from a billion row table

    This is a fictitious scenario, how would you write a select statement on a table with a billion rows. It never returns anything,right? Somebody was suggesting a stored procedure. As an example : Assuming a Table with columns      Account(int), TransD