Can you find out last location of iphone if lost and offline

Can you find out last location of iphone if lost and offline

No.  The phone must be online to provide a location and a history of locations is only provided if you place it in Lost Mode, and the phone goes online (at least temporarily) to provide it's location.

Similar Messages

  • HT201365 How to find out last location of iPhone

    My phone has gone missing but was wondering if there is any way we can find out the last location on iCloud and how to do it

    First, this is the iPad forum. I've asked that your post be relocated to the proper area.
    If it's not currently online through either a cellular or WiFi connection, there is no way to get it. Find my iPhone retains last know location for a short time, but once gone, it's gone. Sorry.

  • How can i check the last location of iphone when it was on?

    I left my iphone in a taxi, but i found the taxi's home, i went to his home and i told him to give me back my iphone but he told me that he never seen iphone in his taxi.
    the iphone was on when i left it in the taxi and it was still on till 4 hours after i left it, probably he found the iphone and went to his home so i just wanna check the last location of iphone, if it shows in his home area so i will be sure that he got the iphone and then i contact the police to take it back but otherwise i can not do anything cause he says i haven't found it.
    plz plz help me

    it was active when i lost it and i went to icloud website, but it shows offline. that means that it is off.
    i just need to know if the iphone keeps recording of location where you go and how can i see the last location of iphone when it was on.

  • If your phone is stolen and someone tries to register it to their Apple ID can you find out ?

    If your iPhone is stolen and someone tries to register it to another Apple ID can you find out.

    Sorry, no.

  • How can you find out what generation your iPod touch is?

    How can you find out what generation your iPod touch is?

    Hi,
    Here is help for the operating system:
    If you are locked to iOS 3 then you have an iPod Touch 1st Gen.
    If you are locked to iOS 4 then you have an iPod Touch 2nd Gen.
    If you are locked to iOS 5 then you have an iPod Touch 3rd Gen.
    If you are locked to iOS 6 then you have an iPod Touch 4th Gen.
    If you can get iOS 7 and have an iPhone 5 sized screen [bigger] you have the current iPod Touch 5th Gen.
    I assume since it says you have iOS 5.1.1 you have an iPod Touch 3rd Gen.
    Also, you may want to sync it so iTunes can tell you or you can look at the model number on the back.
    Hope this helped.

  • How can you find out what time you were on a website on on your iPod?

    How can you find out what time and day you were on a certain website on your iPod?

    You can find the day in Safari's History, but not the time.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • How can i find out which network my iphone is locked to

    Sorry if iv posted this in the wrong section.well the question is quite simple. how can i find out which network my iphone 4s is locked to, without purchasing sim cards from every network.
    I just bought the phone second hand with no sim as a birthday present for my wife with the intention of getting it unlocked (not jailbroken)
    If any body can give me any advice it would be greatly appreciated.

    call Apple

  • How can you find out if your mac is infected with the flash back virus

    how can you find out if your mac is infected with the flash back virus?

    F-Secure's Flashback removal tool - http://www.f-secure.com/v-descs/trojan-downloader_osx_flashback_k.shtml - supposedly also works on OSX 10.5 and earlier.
    05 Apr 2012 How to Detect and Protect Against Updated Flashback Malware - http://tidbits.com/article/12918 - detection methods for multiple browsers and general information
    Leopard and earlier users see recommendations at: https://discussions.apple.com/thread/3872491

  • HT4211 how can you find out what kb are being used by what apps

    how can you find out what kb are being used by what apps there is always alot of kb being used even when I don't use my phone

    Go into settings , general, usage and it tells you what the apps use. If your refering to the memory storage of the apps.

  • How can you find out whether anything in a table's been selected?

    How can you find out is there anything(a cell or a row) in a table's been selected???
    it's doesn't matter which cell or which row's been selected in a table, but just to know is there anything been selected
    I can't figure out the code to do that >.<
    is there anything to do with
    bookTable.getCellEditor()?

    How can you find out is there anything(a cell or a row) in a table's been selected???
    it's doesn't matter which cell or which row's been selected in a table, but just to know is there anything been selected
    I can't figure out the code to do that >.<
    is there anything to do with
    bookTable.getCellEditor()?

  • Can  you move your notes from one iphone to another and how?

    Can you move your notes from one iphone to another and how?

    You can do this a couple ways.  If you are using MobileMe, notes is one of the options for synchronization and that would be automatic.  Another way is to backup your iphone to iTunes, this backs up essentially all the information on your phone (except for music) and if you restore the other iphone to the image of the original your notes will be transfered.

  • How can you find out if another VI running on the same computer and how can you find out the name of that VI?

    Suppose that several VIs running simultaneously on the same computer. How can I find out the names of the running VIs, from another VI?
    If the already running VIs are clones of the same basic VI, open and run with the option "Prepare to call and forget", how can I find out the names and index of each clone? 

    I had an application where I spawned (= ran with Start Asynchronous Call) multiple (reentrant) copies of VIs, and would occasionally "lose control" of them.  I needed a way to find all VIs that were running "Top Level" and stop them (so I didn't have to log off from Windows).
    I used the Application Property "All VIs in Memory" to get an array of (wait for it ...) All VIs in Memory.  I took each name, opened a VI reference to it (simply wire the name string in, as the VI is, by definition, "in memory"), looked at its VI Execution State, and if it was Run Top Level, Invoked the FP.Close and Abort VI Methods.  [To prevent the VI that did all this from "committing Suicide", I compared the name string with the current Call Chain, and did nothing if there was a match].
    I think you could adopt this idea to do what you need.
    BS

  • W can you find out what is in your icloud

    I can I find out just what is stored in icloud.  Having trouble with photo stream for pictures loaded on iphone taken prior to buying the ipad.

    Having trouble with photo stream for pictures loaded on iphone taken prior to buying the ipad.
    Nancy...
    Try here >  iCloud: Photo Stream Troubleshooting

  • How can I find out what is running in the background and running my batterie down

    How can I find out what is running in the background

    Hi simpbarby,
    Welcome to the Support Communities!
    The links below will help you understand what apps are running on your iPhone.  You can quit the ones that you aren't using.
    iOS: Understanding multitasking
    http://support.apple.com/kb/ht4211
    This link will provides tips to conserving battery life:
    Apple - Batteries - iPhone
    http://www.apple.com/batteries/iphone.html
    Optimize Your Settings
    Depending on how they are set, a few features may decrease your iPhone battery life. The tips below apply to an iPhone running iOS 7.0 or later.
    Enable Wi-Fi: Having Wi-Fi enabled helps consume less power when doing activities that access data. Go to Settings > Wi-Fi and log in to a Wi-Fi network.
    Adjust brightness: Dim the screen or turn on Auto-Brightness to extend battery life. Turning on Auto-Brightness allows the screen to adjust based on lighting conditions.
    Fetch new data less frequently: The more frequently email or other data is fetched, the quicker your battery may drain. To fetch data manually: Go to Settings > Mail, Contacts, Calendars > Fetch New Data and tap Manually.
    Turn off push notifications: Apps with Push Notification alert you of new data, which may impact battery life. To disable, go to Settings > Notifications, choose the app you want to disable, and do the following:
    Change Alert Style to None.
    Turn Badge App Icon off.
    Turn Sounds off.
    Note: New data will be received when you open the app.
    Minimize use of location services: Apps that actively use location services, such as Maps, may reduce battery life. You can see which applications have recently used location services by going to Settings > Privacy > Location Services.
    Use Airplane Mode in low- or no-coverage areas: Your iPhone always tries to maintain a connection with the cellular network, which may use more power in low- or no-coverage areas. Turn on Airplane Mode to increase battery life in these situations.
    Viewing Usage StatisticsKnowing and understanding your iPhone usage can help you better manage your battery life. To view your iPhone usage statistics, go to Settings > General > Usage. Under “Time since last full charge”:
    Usage: Amount of time iPhone has been awake and in use since the last full charge. iPhone is awake when you’re on a call, using email, listening to music, browsing the web, or sending and receiving text messages, or during certain background tasks such as auto-checking email.
    Standby: Amount of time iPhone has been powered on since its last full charge, including the time the phone has been asleep.
    I hope this information helps ....
    Have a great day!
    - Judy

  • Can i find out my ipad serial number if stolen and i dont have the packaging

    Can I find out my ipad serial number if it's been stolen, but I don't have original packaging?

    Did you register it with your Apple ID?
    https://supportprofile.apple.com

Maybe you are looking for

  • Is there a way to *disable* tv-out on ipod touch?

    I just upgraded from a regular ipod classic to the new touch. I had one of those Peripheral ipod kits in the car, and my son likes to watch movies on our longer drives to the grandparents every weekend. Anyway, got this new ipod touch, which blocks o

  • Java.lang.Error: JAX-RPC 1.1 method is not supported in WLS 8.1 clients.

    We have some web services that run under OC4J 10.1.3.4. We have various JEE 'client' apps (JSF, servlets etc.) that use these web services. These JEE apps also run under OC4J. We started a migration project from oc4j to weblogic 10.3.2. In phase 1 we

  • How can i add a caption on photo or video in DW ?

    I have some photos and i like add some text on photo as description (No as part of photo). i like google search, can read this text and clients can highlight text and copy it. in my site(above it) : iranmct.com i make with Joomla plugin but like make

  • Different user IDs in LDAP and R/3

    Hi, EP EP 6.0 SP20 We have configured Single sign on from protal to R/3. Works great... Then we started out to use LDAP for Portal user maangement. PErformed the configuration in portal and this works fine as well. My main issue is that the LDAP user

  • Mailto setting with Outlook 2010

    I have a computer with XP, Firefox 3.6.13 and Outlook 2010 (32 bit). The Mailto setting shows a file path to Outlook which is invalid, and does not give me the option of "use Microsoft Outlook (default)", which is what I believe it should do. With 20