Can you have a look at this video and give advice please?

Hi Guys,
Can you have a look at this video-
http://www.youtube.com/watch?v=UA0x3bQUW-g
I shot it for a friend at a hotel. Can you let me know if if works ok / stutters etc. on your computer.
I edited hdv pal / ppro cs3 then adobe media encoder to H 264 1280 x 720 25fps bitrate min 2 max 4. keyframes 25.
It looks pretty bad i think at the normal youtube. It looks a lot better when you hit the 'watch in hd' but begins to stutter.
Do you have any advice?
Many thanks
scott

First, thank you for doing a very nice piece. I'm a tad bit tired of the "in-your-face" skateboarding pieces. The young lady is also "easy on the eyes."
Second, I looked at the piece in both resolutions, and also after all buffering had completed. The only things that I saw were one Transition at about the 1/4 point that seemed to have about a 1-frame "glitch," or something. Two of the Titles also did not seem to fade-up/move-in at the same pace, or with the same smoothness as the others. Even looking at movement, like the flag (again near the 1/4 mark - sorry that I did not write down the exact TimeCode), I did not notice any stuttering. I'd better get this out of the way right now, I'm viewing on my laptop's 17" 1680x1050 nVidia GeForce 8800M GTX-512MB display, with full hardware acceleration.
Not sure what you, and Dan, are seeing. I'm usually a pretty critical observer, though might be missing something important. If you can give me a TimeCode and where, in the frame, you're both seeing the problems, I'll be glad to give it another go.
Good luck,
Hunt
PS I like the mood that both the visuals and music convey. My wife also made note of the URL, for our next trip to the UK in October.

Similar Messages

  • Random Kernel attacks ... can you have a look at the log and maybe help me out?

    Hello,
    i have an old macbookpro since 2006 and i am getting random kernel attacks during booting up. Here is a copy of the log that i dont understand at all. Can someone have a look at it so that if a peripheral is responsible i could remove it etc? Thank you very much in advance...
    Interval Since Last Panic Report:  1014086 sec
    Panics Since Last Report:          1
    Anonymous UUID:                    715B81C9-84E0-46BE-BAA4-7B9F69D717E2
    Thu Mar 13 19:41:46 2014
    panic(cpu 1 caller 0x30c210): "vnode_rele_ext: vp 0xadda940 usecount -ve : -1.  v_tag = 16, v_type = 1, v_flag = 84800."@/SourceCache/xnu/xnu-1699.32.7/bsd/vfs/vfs_subr.c:1711
    Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
    0x48a43908 : 0x2203de (0x6b08cc 0x48a43928 0x229fb0 0x0)
    0x48a43938 : 0x30c210 (0x6c33e0 0xadda940 0xffffffff 0x10)
    0x48a43968 : 0x30e109 (0xadda940 0x0 0x0 0x0)
    0x48a43988 : 0x48a5237b (0xadda940 0x1 0x29794f74 0x15f)
    0x48a439a8 : 0x48a531a8 (0x8b15000 0x6d51330 0x20 0x48a54aa8)
    0x48a43b98 : 0x48a5426e (0xadda940 0x7e48b54 0x6002f04 0x2)
    0x48a43bb8 : 0x54d297 (0x6002f04 0x0 0x2 0x7e48b54)
    0x48a43be8 : 0x30863e (0x6110a04 0x6002f04 0x2 0x7e48b54)
    0x48a43c28 : 0x322aa8 (0xadda940 0x48a43e50 0x8001 0x7e48b54)
    0x48a43c88 : 0x31aea0 (0x48a43d20 0x48a43ce8 0x48a43e80 0x7e48b54)
    0x48a43cf8 : 0x31b4ad (0x7e48b54 0x48a43d20 0x8000 0x48a43e80)
    0x48a43f78 : 0x5f3c2a (0x6441918 0x867bad4 0x7e48a98 0x0)
    0x48a43fc8 : 0x2e60a7 (0x867bad0 0x0 0x10 0x867bad0)
          Kernel Extensions in backtrace:
             com.sophos.kext.sav(8.0.14)[9C551297-42E6-4D0D-8221-F4456D0099D5]@0x48a51000->0 x48a56fff
    BSD process name corresponding to current thread: notifyd
    Mac OS version:
    11G63
    Kernel version:
    Darwin Kernel Version 11.4.2: Thu Aug 23 16:26:45 PDT 2012; root:xnu-1699.32.7~1/RELEASE_I386
    Kernel UUID: 859B45FB-14BB-35ED-B823-08393C63E13B
    System model name: MacBookPro2,2 (Mac-F42187C8)
    System uptime in nanoseconds: 908326037068
    last loaded kext at 291712925725: com.lacie.driver.LaCie_RemoteComms          1.0.1 (addr 0xd15000, size 12288)
    last unloaded kext at 355433688452: com.lacie.driver.LaCie_RemoteComms          1.0.1 (addr 0xd15000, size 12288)
    loaded kexts:
    com.sophos.kext.sav          8.0.14
    com.intego.kext.AppBarrierKPI          2.2
    com.splashtop.driver.SRXFrameBufferConnector          1.6
    com.intego.kext.NetBarrierKPI          10.5.4
    com.splashtop.driver.SRXDisplayCard          1.6
    com.Cycling74.driver.Soundflower          1.6.6
    com.markspace.driver.Android.RNDIS          1.2
    com.plantronics.driver.PlantronicsDriverShield          4.3
    com.Logitech.Control Center.HID Driver          3.9.0
    com.seagate.driver.PowSecLeafDriver_10_5          5.0.1
    com.oxsemi.driver.OxsemiDeviceType00          1.28.13
    com.seagate.driver.PowSecDriverCore          5.0.1
    net.osx86.kexts.GenericUSBXHCI          1.2.7
    com.rim.driver.BlackBerryUSBDriverInt          0.0.67
    com.apple.driver.AppleHWSensor          1.9.5d0
    com.apple.driver.AppleHDA          2.2.5a5
    com.apple.driver.AppleUpstreamUserClient          3.5.9
    com.apple.driver.AudioAUUC          1.59
    com.apple.kext.ATIFramebuffer          7.3.2
    com.apple.driver.SMCMotionSensor          3.0.2d6
    com.apple.filesystems.autofs          3.0
    com.apple.driver.AppleSMCPDRC          5.0.0d8
    com.apple.driver.AppleSMCLMU          2.0.1d2
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.iokit.IOBluetoothSerialManager          4.0.8f17
    com.apple.driver.AirPort.Atheros21          431.14.10
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AudioIPCDriver          1.2.3
    com.apple.driver.ApplePolicyControl          3.1.33
    com.apple.driver.ACPI_SMC_PlatformPlugin          5.0.0d8
    com.apple.driver.AppleLPC          1.6.0
    com.apple.driver.AppleBacklight          170.2.2
    com.apple.driver.AppleMCCSControl          1.0.33
    com.apple.ATIRadeonX1000          7.0.4
    com.apple.driver.CSRUSBBluetoothHCIController          4.0.8f17
    com.apple.driver.AppleUSBTrackpad          227.6
    com.apple.driver.AppleIRController          312
    com.apple.driver.AppleUSBTCKeyEventDriver          227.6
    com.apple.driver.AppleUSBTCKeyboard          227.6
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          33
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCIBlockStorage          2.1.0
    com.apple.driver.AppleUSBHub          5.1.0
    com.apple.iokit.AppleYukon2          3.2.2b1
    com.apple.driver.AppleAHCIPort          2.3.1
    com.apple.driver.AppleIntelPIIXATA          2.5.1
    com.apple.driver.AppleFWOHCI          4.9.0
    com.apple.driver.AppleSmartBatteryManager          161.0.0
    com.apple.driver.AppleUSBEHCI          5.1.0
    com.apple.driver.AppleUSBUHCI          5.1.0
    com.apple.driver.AppleEFINVRAM          1.6.1
    com.apple.driver.AppleRTC          1.5
    com.apple.driver.AppleHPET          1.7
    com.apple.driver.AppleACPIButtons          1.5
    com.apple.driver.AppleSMBIOS          1.9
    com.apple.driver.AppleACPIEC          1.5
    com.apple.driver.AppleAPIC          1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient          195.0.0
    com.apple.nke.applicationfirewall          3.2.30
    com.apple.security.quarantine          1.4
    com.apple.security.TMSafetyNet          8
    com.apple.driver.AppleIntelCPUPowerManagement          195.0.0
    com.apple.driver.DspFuncLib          2.2.5a5
    com.apple.kext.triggers          1.0
    com.apple.iokit.IOFireWireIP          2.2.5
    com.apple.iokit.IOSurface          80.0.2
    com.apple.iokit.IOSerialFamily          10.0.5
    com.apple.iokit.IO80211Family          420.3
    com.apple.driver.AppleHDAController          2.2.5a5
    com.apple.iokit.IOHDAFamily          2.2.5a5
    com.apple.iokit.IOAudioFamily          1.8.6fc18
    com.apple.kext.OSvKernDSPLib          1.3
    com.apple.driver.AppleSMC          3.1.3d10
    com.apple.driver.IOPlatformPluginLegacy          5.0.0d8
    com.apple.driver.IOPlatformPluginFamily          5.1.1d6
    com.apple.driver.AppleGraphicsControl          3.1.33
    com.apple.driver.AppleBacklightExpert          1.0.4
    com.apple.driver.AppleSMBusController          1.0.10d0
    com.apple.iokit.IONDRVSupport          2.3.4
    com.apple.kext.ATI1600Controller          7.3.2
    com.apple.kext.ATISupport          7.3.2
    com.apple.iokit.IOGraphicsFamily          2.3.4
    com.apple.driver.AppleUSBBluetoothHCIController          4.0.8f17
    com.apple.driver.IOBluetoothHIDDriver          4.0.8f17
    com.apple.iokit.IOBluetoothFamily          4.0.8f17
    com.apple.iokit.IOUSBHIDDriver          5.0.0
    com.apple.driver.AppleUSBMergeNub          5.1.0
    com.apple.iokit.IOFireWireSerialBusProtocolTransport          2.1.0
    com.apple.iokit.IOFireWireSBP2          4.2.0
    com.apple.iokit.IOATABlockStorage          3.0.1
    com.apple.iokit.IOUSBUserClient          5.0.0
    com.apple.iokit.IONetworkingFamily          2.1
    com.apple.iokit.IOAHCIFamily          2.0.8
    com.apple.iokit.IOATAFamily          2.5.1
    com.apple.iokit.IOFireWireFamily          4.4.8
    com.apple.driver.AppleEFIRuntime          1.6.1
    com.apple.iokit.IOHIDFamily          1.7.1
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          177.11
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.driver.DiskImages          331.7
    com.apple.driver.AppleKeyStore          28.18
    com.apple.iokit.IOUSBMassStorageClass          3.0.3
    com.apple.driver.AppleUSBComposite          5.0.0
    com.apple.iokit.IOSCSIBlockCommandsDevice          3.2.1
    com.apple.iokit.IOStorageFamily          1.7.2
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.2.1
    com.apple.iokit.IOUSBFamily          5.1.0
    com.apple.driver.AppleACPIPlatform          1.5
    com.apple.iokit.IOPCIFamily          2.7
    com.apple.iokit.IOACPIFamily          1.4
    Model: MacBookPro2,2, BootROM MBP22.00A5.B07, 2 processors, Intel Core 2 Duo, 2.33 GHz, 3 GB, SMC 1.12f5
    Graphics: ATI Radeon X1600, ATY,RadeonX1600, PCIe, 256 MB
    Memory Module: BANK 0/DIMM0, 2 GB, DDR2 SDRAM, 667 MHz, 0x7F98000000000000, 0x202020202020202020202020202020202020
    Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 667 MHz, 0x7F7F7F0B00000000, 0x4E5431475436345538484230424E2D334320
    AirPort: spairport_wireless_card_type_airport_extreme, Atheros 5416: 2.1.14.9
    Bluetooth: Version 4.0.8f17, 2 service, 11 devices, 2 incoming serial ports
    Network Service: AirPort, AirPort, en1
    PCI Card: sppci_expresscard_name, ExpressCard
    Serial ATA Device: KINGSTON SV300S37A240G, 240.06 GB
    Parallel ATA Device: WDC WD7500BPKT-00PK4T0, 750.16 GB
    USB Device: Built-in iSight, apple_vendor_id, 0x8501, 0xfd400000 / 5
    USB Device: USB2.0 Hub, 0x05e3  (Genesys Logic, Inc.), 0x0608, 0xfd300000 / 2
    USB Device: USB Receiver, 0x046d  (Logitech Inc.), 0xc50c, 0xfd340000 / 3
    USB Device: USB Receiver, 0x046d  (Logitech Inc.), 0xc51a, 0xfd330000 / 4
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x021b, 0x1d200000 / 2
    USB Device: IR Receiver, apple_vendor_id, 0x8240, 0x5d200000 / 2
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8205, 0x7d100000 / 2
    FireWire Device: FA GoFlex Desk, Seagate, 800mbit_speed

    Remove the Sophos product by following the instructions on this page. If you have a different version, the procedure may be different.
    Remove the Intego product by following the instructions on this page. Again, if you have a different version of the product, the procedure may be different.
    Back up all data before making any changes.

  • How many lines can you have on a nation wide talk and text plan?

    How many lines can you have on a nation wide talk and text plan?

    A max of five lines is allowed on the Nationwide Talk & Text family plan.

  • Can you have different passwords for mail account and ICloud?

    Can you have different passwords for mail account and ICloud?

    Yes - you want to go under Notifications, Mail.   Set each acct the way you want.

  • I have a file where I am running out of memory can anyone take a look at this file and see?

    I am trying to make this file 4'x8'.
    Please let me know if anyone can help me get this file to that size.
    I have a quad core processor with 6 gig of ram and have gotten the file to 50"x20", but I run out of memory shortly thereafter.  Any help would be appreciated.
    Thanks,

    Where to begin? You should look into using a swatch pattern instead of those repeating circles. Also, I see that each circle in your pattern is actually a stack of four circles, but I see no reason why. Perhaps Illustrator is choking on the huge number of objects required to make that patterns as you haave constructed it.
    Here is a four foot by eight foot Illustrator file using a swatch pattern. Note that, despite the larger size, the file is less than one 16th the size.

  • Can you have a look at my code please, where am i going wrong?

    Compiles fine but i get a nullPointerException
    in the setLayerOne() method and the setInputs() method
    the error seems to point to the Neuron[][] network
    but i thought it should be ok as i initilised the pointer as static
    the Neuron class is compiled and contains both these methods.
    also, is this bad design to make all my varibles static like this
    thanks for the help
    Tim
    import java.io.*;
    public class Guesser {
      static char[] user = new char[100];
      static int guess_no = 1;
      static int noOfLayers;
      static BufferedReader br = new BufferedReader( new InputStreamReader(System.in));
      static Neuron[][] network;
      static int[] layers;
      public static void main(String args[])
        throws IOException
        guesserNetwork();
      ///now for the guessing bit
      int guess_no = 0;
      char guess;
      //char dummy;
      //BufferedReader br = new BufferedReader( new InputStreamReader(System.in));
      char[] user = new char[100];
      while (guess_no<10) {
        System.out.println("Please think of Heads (H) or Tails (T) then press enter.");
        if (guess_no == 1)
          guess = 'H';
        else if ( user[guess_no] == 'H' )
          guess = 'T';
        else
          guess = 'H';
        // now we tell the user what our guess was,
        char dummy;
        dummy = (char) br.read(); // wait for the return key pressed
        System.out.println(guess);
        // Find out what the user was thinking of
        // and force the user to H or T
        user[guess_no] = (char) br.read();
        if (user[guess_no] == 'h')
        {user[guess_no] = 'H';}  //this does not work i dont know why
        else if (user[guess_no] == 't')
        {user[guess_no] = 'T';}
        dummy = (char) br.read(); // clear the stream for the return key press
        while ( user[guess_no] != 'H' && user[guess_no] != 'T')
          System.out.println("You must enter H or T");
          user[guess_no] = (char) br.read();
        setLayerOne();  //////HERES WHERE I GET NULLPOINTER EXCEPTION
        guess_no++;
      while (guess_no<100){
        //call update method
        //print output of last node
        network[0][guess_no].inputGuess(guess_no);
        guess_no++;
      static void setLayerOne() ////I GET NULLPOINTER EXCEPTION
       network[0][guess_no].inputGuess(guess_no); // sets the first layer neurons
      static void setInputs ()
         for (int i = 1; i < noOfLayers; i++){
           for(int j=0; j < layers; j++){
    network[i][j].updateInput(i, network[i-1], network[i-1].length); //sets the other neurons
    static void guesserNetwork()
    int noOfNeurons[] = {10,1,1};
    int nodes = 0;
    noOfLayers = 3;
    int[] layers = new int[noOfLayers];
    for (int i =0; i < noOfLayers; i++)
    layers[i] = noOfNeurons[i];
    System.out.println("layer " + (i + 1) + " has " + noOfNeurons[i] + " neurons");
    nodes += noOfNeurons[i];
    System.out.println("total no of nodes = " + nodes);
    System.out.println("building network...");
    //make (noOfLayers)arrays of arrays
    Neuron[][] network = new Neuron[noOfLayers][];
    for (int i=0; i < noOfLayers; i++)
    //for each layer make the desired number of rows(of neurons)
    int rows = layers[i];
    network[i] = new Neuron[rows];
    //instinate neuron objects one by one
    for (int j=0; j < layers[i]; j++)
    if (i==0)
    network[i][j] = new Neuron(noOfLayers, i, j, rows, 1, user[j]);
    else
    boolean isFirstLayer = false;
    network[i][j] = new Neuron(noOfLayers, i, j, rows, layers[i-1], network[i-1]);

    Main calls guesserNetwork() which initilises the array:-
    Neuron[][] network = new Neuron[noOfLayers][];
         for (int i=0; i < noOfLayers; i++)
           //for each layer make the desired number of rows(of neurons)
           int rows = layers;
    network[i] = new Neuron[rows];
    //instinate neuron objects one by one
    for (int j=0; j < layers[i]; j++)
    if (i==0)
    network[i][j] = new Neuron(noOfLayers, i, j, rows, 1, user[j]);
    else
    boolean isFirstLayer = false;
    network[i][j] = new Neuron(noOfLayers, i, j, rows, layers[i-1], network[i-1]);
    later main calls setLayerOne():-
    static void setLayerOne()
       network[0][guess_no].inputGuess(guess_no); // sets the first layer neurons
      }and gives this error:-
    NullPointerException:
    at Guesser.setLayerOne(Guesser.java:77)
    at Guesser.main(Guesser.java:62)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    I nave set network[][] to static so that it can be acessed from the main method and the other methods in this class.
    thanks again

  • How can you use one NetStream to publish video and audio from another NetStream in AS3?

    Let's say one of your client programs in AS3 is able to receive live video and audio from a NetStream and play it on the screen.  How could you make it also take that video/audio stream that it's receiving, copy it over into another NetStream, and publish it elsewhere?  I need to know how to do with this regardless of whether RTMP, RTMFP, or some mixture is involved.  The reason why the stream needs to be relayed this way is a real long story, but it's necessary in this particular case. Thanks!

    RTMP is TCP, which has higher overhead and latency because it guarantees packets are delivered (handshaking, causing latency and overhead). It also doesn't allow you to share connections directly between clients forcing the server to do all the work.
    RTMFP uses UDP, which is a choice protocol for streaming video because it's the opposite. It's lossy which decreases latency and overhead from no retransmissions and most importantly (in some applications) allows you to connect directly from one Flash Player to another Flash Player (p2p) so the server overhead is dramatically reduced. The server is only required to negotiate the initial connection and then it's up to the clients to continue to facilitate that.
    How you code your one to many or many to many relationship broadcast network will be based entirely on which of those you choose.
    URLStream is very common to use in p2p. Here's an older Adobe article on p2p and an alternate quick old video tutorial (FP10) as a quick simple example of p2p over RTMFP you can view the source of.

  • Can someone take a look at my project and give me ideas to reduce lag/optimize it? (relatively new to flash and need help)

    Dropbox - TV_AL_Q
    I really need to reduce the lag happening in this project. I know practically nothing about action script except for what I've used in this project so please keep that in mind.
    Im going to try and break apart the grouped art so its in its most basic form and see if that helps, and also change all my tweens to frame by frame since those two things helped me with an animation I did awhile back that was lagging severely.
    But I was hoping someone with more knowledge could take a look and see if there is anything that they know of that I could do to help fix this. I'm working in Flash cs6 and using action script 3.
    I have to turn this project in by this Friday (the 20th) so I would love to get this sorted by then but even if I can't I would still be interested in some possible solutions, just for learnings sake.
    Thanks.

    Thank you for yet another cryptic reply, remember I'm the idiot here who doesn't understand this stuff so please can you explain things in a little more detail. Thanks.
    I am using the JW Player setup assistant and it lists two types of code
    The "Embed code" and the "swfobject 1.5 code" but not an Object/Embed code that you mention.
    This is the code that the website is telling me to use.
    <script type="text/javascript" src="/embed/swfobject.js"></script>
    This text will be replaced
    <script type="text/javascript">
    var so = new SWFObject('/embed/player.swf','mpl','480','270','9');
    so.addParam('allowscriptaccess','always');
    so.addParam('allowfullscreen','true');
    so.addParam('flashvars','&file=http://web.me.com/nathmac31/Flash/WaineWeddingHD. swf');
    so.write('player');
    </script>
    My movie does play on through the player on the JW site, after about 30 seconds of waiting for the picture to appear. When I cut and paste the above code into my webpage, I don't get anything. I have dropped the "Player.swf" and "swfobject.js" files into the folder containing the contents of the page that I want the player to appear on.
    Where is the exact best place to drop these files?

  • Can you have code run in a terminal and applet?

    For example in my program in Main we enter the data for menu and amount of the exchange but the result is displayed in an applet.
    works great in the terminal window.
    but when using an applet it will not work.
    import java.awt.*;
    import java.applet.*;
    import javax.swing.* ;
    import TerminalIO.*;
    public class MetricConversionMain    {
             final static String CRLF = "\n" ;     
             static String msgOut ;                   
         public static void main ( String[] args )     {
            int valid  = 0;
            int choose = 0;
            double numUnits = 0.0; 
            double convertedUnits = 0.0;
                                  // title, class, author and version info  to
         KeyboardReader entries = new KeyboardReader(); //object for keyboard entry
         while (valid != 1) {
                // menu for conversion selection 1 thru 4          
         System.out.println("\n\t\t1 \tFor inches to centimeters");
          System.out.println("\t\t2 \tFor quarts to liters");
          System.out.println("\t\t3 \tFor pounds to kilograms");
          System.out.println("\t\t4 \tFor miles to Kilometer");
              choose = // GW corrected my code to the present prior I was choose = choose.readInt etc etc
            entries.readInt("\n\t\tPlease choose one of the following menu items to convert: ");
          if (choose == 1 || choose == 2 || choose == 3 || choose ==4 ) {
               valid = 1 ;
          else {
               System.out.println("Invalid Selection.") ;
          switch (choose) {
              case 1 : System.out.println("Converting inches to centimeters... ") ; break ;
              case 2 : System.out.println("Converting quarts to liters... ") ; break ;
              case 3 : System.out.println("Converting pounds to kilograms... ") ; break ;
              case 4 : System.out.println("Converting miles to kilometers... ") ; break ;
         } // Error checking, reiterates the user's current choice prior to next question
         System.out.println();
         KeyboardReader useEntry = new KeyboardReader(); //object for keyboard entry
              numUnits =
            useEntry.readDouble("\n\t\tNow please enter the amount you wish to convert: ");
              System.out.println ("\t\tThe conversion comes to  " + numUnits);
         //KeyEntry equal = new KeyEntry();   
         //equal.setNumUnits
        //(useEntry.readDouble("\n\t\tNow please enter the amount you wish to convert: "));
         //System.out.println("\t\tThe conversion comes to  " + getnumUnits());
         switch (choose) {
              case 1 : Inch fromInch = new Inch(numUnits); break ;}
         case 2 : Quart fromQuart = new Quart(numUnits) ; break ;
              /*     case 3 : Pound fromPound = new Pound( numUnits) ; break ;
              case 4 : Mile fromMile = new Mile(numUnits) ; break ;
         } // Switch statement that performs the correct conversion based on the user's input*/
                   // Instantiate US Standard Objects
         /*     Inch fromInch = new Inch(1) ;
              Foot fromFoot = new Foot(1) ;
              Yard fromYard = new Yard(1) ;
              Mile fromMile = new Mile(1) ;
              Ounce fromOunce = new Ounce(1) ;
              Quart fromQuart = new Quart(1) ;
              Gallon fromGallon = new Gallon(1) ;
              Pound fromPound = new Pound(1) ;
              // Instantiate Metric Objects          
              Centimeter fromCentimeter = new Centimeter(1) ;
              Meter fromMeter = new Meter(1) ;
              Kilometer fromKilometer = new Kilometer(1) ;
              Gram fromGram = new Gram(1) ;
              Liter fromLiter = new Liter(1) ;
              Kilogram fromKilogram = new Kilogram(1) ;
              LitGal fromLitGal = new LitGal(1) ; */
         }     //  main
    }     //     class MetricConversionMainsupper classpublic class SuperConverter        {
         *     This class is the super class for a series of
         *     subclasses that perform conversion from metric to
         *     imperial or vice versa.
         protected double numUnits ;
         protected double convertedUnits ;
         protected double factor ;
         // Constructor
         public SuperConverter ( double argNumUnits, double argFactor )  {     
         numUnits = argNumUnits ;
         factor = argFactor ;
         convertedUnits = numUnits * factor ; //convert() ;
         }     // Constructor
         protected double getnumUnits()     {
              return numUnits ;
         protected void setnumUnits     ( double argNumUnits )     {
              numUnits = argNumUnits ;
         protected double convert  () {
              this.convertedUnits = numUnits * factor ;     
              return convertedUnits ;     
         public double getconvertedUnits()     {
              this.convertedUnits = convert() ;
              return convertedUnits ;
    }     //  end SuperConverter Classsubclass that works[public class Inch extends SuperConverter {
         public Inch      (double argNumUnits)
              super ( argNumUnits, 0.914 ) ;
              System.out.print   ("     ") ;
         if (argNumUnits > 1)
                   System.out.println(argNumUnits + " inches = " + convertedUnits + " centimeters") ;
              else
                   System.out.println(argNumUnits + " inch = " + convertedUnits + " centimeters") ;
    /code]
    The code I want to use  with the applet is import java.awt.*;
    import java.applet.*;
    import javax.swing.* ;
    public class Inch extends SuperConverter {
         final static String CRLF = "\n" ;     
         static String msgOut ;          
         public Inch      (double argNumUnits)
              super ( argNumUnits, 2.54 ) ;
              System.out.print ("     ") ;
              if (argNumUnits > 1)
              {   msgOut = "     Metric Conversion Chart" + CRLF + CRLF;
              msgOut += "     US Standard to Metric" + CRLF ;
         msgOut += "     -------------------------------------------------" + " " + CRLF ;
                   msgOut = argNumUnits + " inches = " + convertedUnits + " centimeters" ;
              else
              {   msgOut = "     Metric Conversion Chart" + CRLF + CRLF;
              msgOut += "     US Standard to Metric" + CRLF ;
         msgOut += "     -------------------------------------------------" + " " + CRLF ;
                   msgOut += argNumUnits + " inch = " + convertedUnits + " centimeters" + CRLF + CRLF + CRLF ;
              }     JOptionPane.showMessageDialog ( null, msgOut ) ;          
    }

    The issue I have is the applet/window appears behind the terminal window. below is the code that is use for the window. I want to have the window appear infront of the terminal window.import java.awt.*;
    import java.applet.*;
    import javax.swing.* ;
    public class Pound extends SuperConverter {
        final static String CRLF = "\n" ;     
             static String msgOut ;     
         public Pound      (double argNumUnits)
              super ( argNumUnits, 0.454 ) ;     
              System.out.print   ("     ") ;     
              if (argNumUnits > 1)
              {   msgOut = "     Metric Conversion Chart" + CRLF + CRLF;             
                  msgOut +=  "     Metric to US Standard" + CRLF ;
                  msgOut +=  "     -------------------------------------------------" + "         " + CRLF ;
                   msgOut += argNumUnits + " pounds = " + convertedUnits + " kilograms" + CRLF + CRLF + CRLF ;
              else
              {   msgOut = "     Metric Conversion Chart" + CRLF + CRLF;
                  msgOut +=  "     Metric to US Standard" + CRLF ;
                  msgOut +=  "     -------------------------------------------------" + "         " + CRLF ;
                   msgOut += argNumUnits + " pound = " + convertedUnits + " kilograms" + CRLF + CRLF + CRLF ;
              }   JOptionPane.showMessageDialog ( null, msgOut ) ;
    }

  • Can you have 2 Ipods on same computer and each have a different library

    I am running two Ipods on one computer. I have it set for manually chaning the songs not automatic. My question is do we have to share a library? Is it possible for us to each have our own library and if so how do you do that.

    Welcome to Apple Discussions!
    Using Multiple iPods With One Computer
    btabz

  • Can you have one song on a ipad and put it on another ipod without having to use to a computer?

    Just wondering...

    If you are in the US and the song was purchased from iTunes then you should be able to (re-)download it on your other devices : http://support.apple.com/kb/HT2519 . Otherwise no, you need to go via iTunes on your computer

  • Please look at this problem and give me solution

    hi all,
    iam getting this problem when i run th server
    javax.servlet.UnavailableException: Missing configuration resource for path /WEB-INF/struts-config.xml
    so, i am unable to run jsp, servlets using struts in tomcat.
    pls solve this problem
    --> i have a servlet file namd Form.java
    import java.io.IOException;
    import javax.servlet.ServletException;
    import javax.servlet.ServletOutputStream;
    import javax.servlet.http.HttpServletRequest;
    import javax.servlet.http.HttpServletResponse;
    import org.apache.struts.action.Action;
    import org.apache.struts.action.ActionForm;
    import org.apache.struts.action.ActionForward;
    import org.apache.struts.action.ActionMapping;
    public class Form extends Action {
    public ActionForward execute(ActionMapping mapping,
    ActionForm form,
    HttpServletRequest request,
    HttpServletResponse response)
    throws IOException, ServletException {
    ServletOutputStream sos=response.getOutputStream();
    String fname=request.getParameter("firstname");
    String lname=request.getParameter("lastname");
    String dob=request.getParameter("dob");
    String uid=request.getParameter("uid");
    String pwd=request.getParameter("pwd");
    sos.println("First Name = " + fname +" "+lname+"<br>");
    sos.println("DOB = " + dob);
    sos.println("Username = " + uid);
    sos.println("password = " + pwd);
    String target = new String("success");
    return (mapping.findForward(target));
    -->jsp file named form.jsp
    <html>
    <body>
    exe on httpservlet
    <form action="http://localhost:8080/satish/Form">
    enter firstname <input type= "text" name="firstname"><br>
    enter lastname <input type="text" name="lastname"><br>
    enter DateofBirth <input type="text" name="dob"><br>
    enter userid <input type="text" name="uid"><br>
    enter password <input type="text" name="pwd"><br>
    <input type="submit" value="register">
    </form>
    </body>
    </html>
    and i have web.xml in F:\projects\tomcat\webapps\satish\WEB-INF
    with below contents
    <?xml version="1.0" encoding="ISO-8859-1"?>
    <!DOCTYPE web-app
    PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
    "http://java.sun.com/dtd/web-app_2_3.dtd">
    <web-app>
    <display-name>struts example</display-name>
    <description>
    Mycode
    </description>
    <!--GENERATED_JSPS-->
    <!-- JSPC servlet mappings start -->
    <servlet>
    <servlet-name>action</servlet-name>
    <servlet-class> org.apache.struts.action.ActionServlet </servlet-class>
    <init-parameter>
    <name>application</name>
    <value>ApplicationResources</value>
    </init-parameter>
    <init-param>
    <param-name>config</param-name>
    <param-value>/WEB-INF/struts-config.xml</param-value>
    </init-param>
    </servlet>
    <servlet-mapping>
    <servlet-name>action </servlet-name>
    <url-pattern>/satish/Form</url-pattern>
    </servlet-mapping>
    <!-- JSPC servlet mappings end -->
    </web-app>
    and struts-config.xml file in F:\projects\tomcat\webapps\satish
    with below contents
    <!DOCTYPE struts-config PUBLIC
    "-//Apache Software Foundation//DTD Struts Configuration 1.1//EN"
    "http://jakarta.apache.org/struts/dtds/struts-config_1_1.dtd" >
    <struts-config>
    <action-mappings>
    <action path="/form" type="Form" input="/form.jsp" >
    </action>
    </action-mappings>
    </struts-config>
    and run the tomcat server
    typed http://localhost/satish/form.jsp
    given the input and clicked submit button and i got
    this
    HTTP Status 404 - /satish/Form
    type Status report
    message /satish/Form
    description The requested resource (/satish/Form) is not available.
    Apache Tomcat/5.0.5

    double post:
    http://forum.java.sun.com/thread.jspa?threadID=684573&tstart=0

  • Can i have some adive on this ibook please.

    http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=8808419648&rd=1&sspagename= STRK%3AMEWA%3AIT&rd=1
    hey guys can you take a look at this ibook and tell me if it is worth buying for a beginner mac user. i use windows at the moment and i want to change to mac. im thinking about buying it.
    any advice or tips? thanks guys.

    Hi, and welcome to Apple Discussions.
    Well, it's been nicely upgraded, but compare it to a new one:
    http://store.apple.com/1-800-MY-APPLE/WebObjects/ukstore?productLearnMore=M9846
    You are still talking about a five-year-old computer. I'd go with a newer one if at all possible. There are just so many things that can go wrong with one as old as a 500 MHz model. It really depends on how it's been used, and we have no way of knowing that.

  • What type of things can you do with the ipod touch 1g and what features does it have

    what type of things can you do with the ipod touch 1g and what features please help

    copied from http://support.apple.com/kb/HT1353#ipodtouch
    iPod touch
    iPod touch features a 3.5-inch (diagonal) widescreen multi-touch display and 8 GB, 16 GB, or 32 GB flash drive. You can browse the web with Safari and watch YouTube videos on the first-ever Wi-Fi iPod. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
    You can update your software up to iOS 3.1, see this article: http://support.apple.com/kb/HT2052

  • Can you have more than one account on the ipad?

    I'm looking into using the ipad in our manufacturing facility, with more than one user on a single ipad.
    Can you have multiple user accounts on it, and if not how would you set up email with multiple accounts where one user can't access another's account?
    Any info would be appreciated.
    Thanks.

    Welcome to Apple Support Communities.
    If each employee uses a web-based email system such as Gmail, Hotmail, Yahoo, and others, and makes a point of NOT automatically saving ID and password, each user would use the Safari browser to access email, privately and confidentially. That also allows viewing email folders created in the webmail account that are not visible in the Mail app using a pop mail server.

Maybe you are looking for

  • Displying data through html from ejb

    hi, I want to display a data or message which is in form of string in my mdb. But i am not having servlet at the back side but i want to provide this data back to user using html. Can this be possible if yes then please give me some reference how to

  • Using Garageband as a sound source?

    We have been trying to find a solution to the speed-change dilemma with GB - I have a 13 mins Cubase project that has 52 speed changes in it. It has been suggested by a Cubase person that we link the composer's Cubase PowerBook to our GB Desktop and

  • I NEED HELP. HELP ME PLEASE!

    I have a e-machine and i just purchased a ibook G4. I am about to connect to the internet via Dial-up. If I connect to the internet with my emachine pc, can I do the BLUE TOOTH thing with my ibook G4? or bi-versa? Which one did you advised me to do?

  • How to Open multiple form with only one screen painter file

    Hi all , I want to reopen the form without closing the active form ,i want to use same srf file .. I have already try it but form already exist error occur . pl help me , how to do it ? how to open multiple form with same srf file without closing act

  • MASTER Role in a groupchat

    Hello, Lately i've been having a problem with my skype groupchat. I'm the Creator of the groupchat, but i accidently left the chat. After that i quickly rejoined, but then i noticed somehow, every other user had the master role all of a sudden. I tri