Can you help with my ipad problem?

I first set my ipad up with a comuter now i have a new laptop how do i reset it up without losing everything? I cant update it to the new software because it wont let me backup it up. I have no clue what to do.

If you still can't get things going try this:
Transfer purchase from iPad to computer
http://support.apple.com/kb/ht1848
Backup
http://support.apple.com/kb/ht1766

Similar Messages

  • Can you help with my printing problem?

    Hello,
    I have been using Adobe reader to run my crafting cds for a long time now. However recently i have had issue with printing. When i press print adobe reader tells me that there is no printers installed yet my printer is installed an set at default!
    Can anyone help me print again pls?

    How about updating to Firefox 4.0.1? There was a flaw in b12 that caused problems with spacing of the type when printing, IIRC. Or maybe that was with b11? Regardless the Firefox4 release version was released two months ago, tomorrow to the day.

  • Can you help with a layer problem?

    I have a photograph. It has a white background. I want to separate the white background from the photograph. The photograph and the white layer are on layer 0. I cannot separate the two. I think I want to raise the photograph to layer 1. Then I can use the separation routine. I have spent about 10 hours messing with without success. This is a 143 K file so I cannot download it. Assume I know nothing which is close to the truth. Step by step would be wonderful.
    Thanks in advance.

    It all depends on the image. Some tools I'd use are the quick selection tool magic wand, the lasso, the pen tool, or channels, refine edges depending on the image.
    If the image is simple:
    1) double-click the background layer's thumbnail in the layers panel to make a layer out of it.
    2) select the background (if it is white, it should be easy) with the quick selection tool or the magic wand.
    3) invert your selection (select>invert, or CTRL+Shift+I
    3) click the create layer mask icon in the layers panel (white circle inside a grey rectangle)
    Searching for "remove background" will give you many results in Google that you could explore.
    Also, you will need to save the image in a format that supports transparency, like PNG, Tiff, PSD, but it also depends what you want to do with the image.

  • Can you help with a Superdrive problem?

    DVD-R disks that I have burned and finalised on an LG PVR are not recognised by my new iMac external superdrive. This was not a problem with my previous iMac with internal dvd drive. Is there a solution please?

    Hmm, from the customer reviews here, I  think you need a different Optical drive...
    http://www.cnet.com.au/lg-ms408-hd-dvr-339298308.htm
    http://eshop.macsales.com/shop/firewire/optical-drives/

  • Can you help with a Trash problem?

    I recently upgarded to 10.6.8 and all has been well.  But now I am having a Trash problem.  I can't drag to trash.  A list comes up, showing 'preparing to move to Trash', with a blue and white flashing line, apparently for every item..  But it has been running every time the machine is awake, since yesterday.  There is no way to delete it and, in the meantime, I can't put things in the trash or empty it.  It seems to be stuck in 'preparing' mode.  Can anyone tell me how to deal with this?  Please?

    Sorry, I should have read the side bars first, but didn't notice them.  The old eyes don't work as well anymore.  Anyway, I resolved the problem by following previous advice and apologize for taking up your time to read my problem.  Thanks!

  • Can you help with itunes installing problem?

    When I try to install itunes on my xp 32 bit it directs me straight to the thank you. what could cause this

    I'd first try downloading an installer from the Apple website using a different web browser:
    http://www.apple.com/itunes/download/
    If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

  • Can you help with technical problems with the stereo imagry option

    can you help with a technical problem with the stereo imagery option ? it won't take out lead vocal in a stereo mp3'

    Because this forum software is so absolutely USELESS now, you don't get to see the whole of the question in this view. In the other (non-list) view it says:
    "can you help with a technical problem with the stereo imagery option ? it won't take out lead vocal in a stereo mp3"
    And the answer is that if you can't isolate the vocal in the stereo field, or it is one of these odd ones where it's used inverted polarity in different parts of the stereo signal for the same vocal, then you won't be able to. But without a sample, it's impossible to tell. If you can post a link to one, that might help. It has to be external to this site though - Adobe in their infinite wisdom don't allow the posting of audio files on their audio U2U forum. Helpful, that, isn't it?

  • Can you help with rematching file names

    After a computer crash needed to reload my library. When doing this I accidently clicked the option to add track numbers to song names.
    Later I was able to locate my iTunes XML from my old PC, however many of the songs (5000 out of 6000) no don't match because the original song name has been changed since my stupid error caused the files names to get the song number in front of them.
    Anybody have any tips for matching the filenames back up. In my original library some files had track numbers in front and some did not. How can I match them back up. I'm comfortable programming and modifying the iTunes XML but I can't figure out a good way to list out the contents of my hard drive to do the actual matching.
    Tony

    Because this forum software is so absolutely USELESS now, you don't get to see the whole of the question in this view. In the other (non-list) view it says:
    "can you help with a technical problem with the stereo imagery option ? it won't take out lead vocal in a stereo mp3"
    And the answer is that if you can't isolate the vocal in the stereo field, or it is one of these odd ones where it's used inverted polarity in different parts of the stereo signal for the same vocal, then you won't be able to. But without a sample, it's impossible to tell. If you can post a link to one, that might help. It has to be external to this site though - Adobe in their infinite wisdom don't allow the posting of audio files on their audio U2U forum. Helpful, that, isn't it?

  • Can you help with unresponsive tools?

    I just upgraded mackbook 10.1 and lightroom 1  to maverick 10.9 and Lr 5. I only used it once...was acclimating and using adjustment brush with delight.... 2nd time back tools are unresponsive; the crop sometimes receptive to a click yet is not fully functional; the brush is seen off to the side and outside of image and does not respond when i click on selected points.

    Because this forum software is so absolutely USELESS now, you don't get to see the whole of the question in this view. In the other (non-list) view it says:
    "can you help with a technical problem with the stereo imagery option ? it won't take out lead vocal in a stereo mp3"
    And the answer is that if you can't isolate the vocal in the stereo field, or it is one of these odd ones where it's used inverted polarity in different parts of the stereo signal for the same vocal, then you won't be able to. But without a sample, it's impossible to tell. If you can post a link to one, that might help. It has to be external to this site though - Adobe in their infinite wisdom don't allow the posting of audio files on their audio U2U forum. Helpful, that, isn't it?

  • Can you help with wireless usb printing?

    I have a D-Link router ([DI-824VUP) that works fine as far as geting online and printing to an ethernet printer,(HP1300n) wirelessly. I recently bought this router because it has a usb printer port, yet I can not get it to see the usb printer (Canon S830D). D-Link was no help, as they don't support Apple wireless printing, even though they do support wired printing via their router. QUESTION-any idea how to get powerbook to see the printer when connected to the router? Printer setup utility does not see it, only the HP. Thanks-bobbabe
    OS 10.3.9.
    Titanium Powerbook 667.   Mac OS X (10.3.9)   D-Link router(DI-824VUP)

    Because this forum software is so absolutely USELESS now, you don't get to see the whole of the question in this view. In the other (non-list) view it says:
    "can you help with a technical problem with the stereo imagery option ? it won't take out lead vocal in a stereo mp3"
    And the answer is that if you can't isolate the vocal in the stereo field, or it is one of these odd ones where it's used inverted polarity in different parts of the stereo signal for the same vocal, then you won't be able to. But without a sample, it's impossible to tell. If you can post a link to one, that might help. It has to be external to this site though - Adobe in their infinite wisdom don't allow the posting of audio files on their audio U2U forum. Helpful, that, isn't it?

  • Guys can you help me, i have problem regarding on syncing of my apps in my ipad it usually stops on step 4 saying determining apps to sync then its stop... can anyone have an idea..i already reset the setting of my ipad

    ys can you help me, i have problem regarding on syncing of my apps in my ipad it usually stops on step 4 saying determining apps to sync then its stop... can anyone have an idea..i already reset the setting of my ipad

    Hello Violet03,
    Thank you for using Apple Support Communities!
    I would recommend a few things here. If you havent already restart both your computer, and the iPad.
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    Restarting your device
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
    Press and hold the Sleep/Wake button until the Apple logo appears.
    If that doesnt work then close all the apps that are running on the iPad with this process:
    From the Home screen, click the Home button twice.
    Tap and hold on the app.
    When it starts to jiggle, tap the to close it.
    Double-click the Home button and try opening the app again.
    From: iOS: Force an app to close
              http://support.apple.com/kb/ht5137
    And if the issue persists it might be a good idea to backup and restore your iPad in iTunes with this article.
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    All the best,
    Sterling

  • Can you help I was having problems with my iPod so I restored it but I accidentally set it up as a new iPod is there any way to restore it from an old  backup when I right click iPod in iTunes there isn't one anyway to recover one or find it on computer

    Hi can you help I was having problems with my iPod so I restored it but I
    accidentally set it up as a new iPod is there any way to restore it from an old
    backup when I right click iPod in iTunes there isn't one anyway to recover one
    or find it on computer

    The following says how to restore from backup.
    iOS: How to back up
    If you go to iTunes>Preferences>Devices you can see if you have an iTunes backup. You need one dated before or the exact time you started the restore.

  • Can you help with Problems that one of our users i having with regiistration of Premiere Pro?

    Can you help with Problems that one of our users i having with registration of Premiere Pro?

    Link for Download & Install & Setup & Activation problems may help
    -Online Chat http://www.adobe.com/support/download-install/supportinfo/
    More information needed for someone to help... please click below and provide the requested information
    -Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840

  • Barbara Brundage, can you help with PS Elements 11 and Epson R2000 printer issue?

    Seeking help with PS Elements 11 which does not work with Epson r2000 printer.  Epson tech support could not fix, said it is PS e11 problem.  Receive prompt on PS e11 screen when I try to print stating "not compatible or settings are not correct.  Have set PS to manage color and printer manages color to off.  Would appreciate any suggestions.  Thank you.

    Hi,
    Sincerely appreciate your help.  Running Windows 7 on a  Dell XPS420.  System has been very stable for years.  Before purchasing the Epson r2000, I owned an r1800 which was an excellent printer but after seven years started to exhibit paper feed problems.  The r1800 worked with all applications and I was well satisfied with the saturation, contrast, etc. printing mostly 8x10 and 11x17 prints. 
    Thank you for the information about the # of installs for PS E11, will try uninstall/reinstall this morning.
    Will let you know how things go.
    Richard
    Date: Thu, 12 Sep 2013 19:47:38 -0700
    From: [email protected]
    To: [email protected]
    Subject: Barbara Brundage, can you help with PS Elements 11 and Epson R2000 printer issue?
        Re: Barbara Brundage, can you help with PS Elements 11 and Epson R2000 printer issue?
        created by Barbara B. in Photoshop Elements - View the full discussion
    What operating system are you using?
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5678022#5678022
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5678022#5678022
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5678022#5678022. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Photoshop Elements by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • TS3694 hello i am trying to update my phone . i am connecting it to itunes but it is giving error 3194 . can you help me resolve this problem please.

    hello i am trying to update my phone . i am connecting it to itunes but it is giving error 3194 . can you help me resolve this problem please.

    Hi ali hakim,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots.
    iOS: Restore error 3194 or 'This device isn't eligible for the requested build'
    http://support.apple.com/kb/TS4451
    This occurs when iTunes is unable to communicate with the update-and-restore server (gs.apple.com). This is most likely because it is being blocked, redirected, or interrupted by security software, hosts-file entries, or other third-party software.
    Cheers,
    - Judy

Maybe you are looking for

  • Problem to add Icon to menu option in Oracle forms

    Hello experts,                       i am using Oracle fussion middleware 11.1.2 (oracle forms 11g) at windows 7. I am trying to make mu custom menu module with Icon images in oracle forms.I have done set property palette with Icon in Menu =Yes Icon

  • I received a text from a friend that she didn't send. Is there an explanation for this?

    So I was texting my friend, we both have iPhones and are both using iMessage to text each other. We got into a rather personal conversation (not that important). But in the middle of the conversation I received a text message (SMS) instead of an iMes

  • .Shg images converted to .gifs in output, popup funcionality erratic

    Hello all, I just recently published my formerly Winhelp output to Webhelp instead and have been fairly pleased with how everything has converted. It eliminated a lot of display problems. However, I noticed that all of my .shg images using popups/jum

  • Apps freeze during update in iOS 8.02

    After updating to 8.02 I am having my ipad freeze during the app update process.  I get the circle but the ring fails to show any download progress. If I touch the circle it returns to the update button?  This on a new iPad air

  • EFWK SMD Setup Wizard

    Hi Fellows, as "User Guide - End-To-End Change Analysis" https://websmp107.sap-ag.de/~sapidb/011000358700000742402007E at topic 2.2 promises the EFWK to offer "an API for the Setup Wizard of Solution Manager Diagnostics (SMD) which will activate all