Can you mix DV and HDV in the same sequence?

Hi Everyone....
I am new to the forum, and new to FCP...yes! I joined the dark side and just got a MAC.
I am trying to learn this system, and the 500 manuals it came with are about as clear as mud.....
Can I mix 16x9 DV footage with 16x9 HDV footage? And please don't tell me I am hosed!
I have some footage right now in a sequence, but it has the red line above the sequence, indicating that it needs to render.
And actually I can't even get the high def footage alone in a sequence to work...but that is another post.
Thanks in advance...
Aubry
Mac Pro Quad Xion Mac OS X (10.4.7) 2.66 GHz | 4GB ram | NVIDIA GeForce 7300 GT | 1 250G &1 500G Internal Drives

I think what your asking is this....the captured clip is:
frame size: 1440x10180
compressor: hdv 1080i60
data rate 3.2 mb
pixel aspect: hd 1440/1080
I changed the sequence settings to match this and it came out all kinds of funky.
Is there another way to find out what kind of high def the clip is? I have the Sony FX1 if that matters....

Similar Messages

Prompted to upgrade iTunes on computer. Won't let me and get error message MSVVR80.dll not found. Attempted to reinstall, won't let me. Can you have iTunes and iCloud on the same computer?

Prompted to upgrade iTunes on computer. Won't let me and get error message MSVVR80.dll not found. Attempted to reinstall, won't let me. Can you have iTunes and iCloud on the same computer?

Try following the instructions of tt2 in https://discussions.apple.com/thread/5822086

Can you have pages and word on the same computer

can you have pages and word on the same computer

Sure, I do (my Office is 2008 but I keep it around for some things I get from work).

Can you fade in and fade out the same layer in the same page state?

I am simulating a lot of touch interactions, and have a hand object that moves over the simllated screen. I want to add small "taps" under the hands to show touch; I can see how its easy to fade IN an object (say a small circle) that represents the touch; but how do I fade OUT that same object?
Any help appreciated!
Rob

Hey Rob,
I think you can achieve the effect you're looking for by using 'on click' interactions in conjunction with action sequences.
I just made a simple example, here are the steps:
1) Select the component you'd like to react on 'tap'
2) In the Interactions panel, click 'Add Interaction', and select 'play action sequence'
3) The timelines panel should now be given focus, and display the new 'on click' action sequence
4) Select the "circle" you'd like to make the fade in followed by fade out effect. If their opacity is set to 0 at this point, use the layers panel to select them.
5) With the circle selected, in the timelines panel click 'add action', located at the bottom.
6) Select 'fade' from the options available.
7) In the properties panel, define the fade properties (for fade in, obviously set 'from' to be 0, and 'to' to be 100)
8) Repeat steps 5 through 7, but choose from=100 and to=0
9) Arrange the fade in, and fade out events on the timeline to get the timing choreography right.
10) If you haven't done so already, set the opacity of your circles to be 0.
Does this work for you?
Is this what you were looking for?
Let me know if you need clarification on any of the steps.
Thanks for posting, great question!
Tara

Can you have IDM and GRC on the same stack?

HI, I am new to IDM and am a Netweaver Basis professional with some performance experience around GRC. Is it wise to place the two together on the same stack?
The customer will have 190,000 employees and lord knows what the roles will look like at this stage but I'm just a bit worried as I have seen the GRC jobs run for an awfully long time with a lot less users/roles and chew things up a bit
the right advice appreciated.

Now thats interesting.
My architect told me that we were using the 7.1 version but in affect it runs on a 7.0 J2EE.... perhaps he is having me on. If you know for sure then let me know.... regardless I'll have a dig in the documentation.
Naturally having Project and dev share with GRC should not be considered an issue but having production, pre-production and validation instances running combined with GRC is my concern as I have seen the GRC really slow up the system. The argument they are saying is the heavy jobs will run overnight and mostly just collection and configuration of GRC during the day. They are intending to run in production with 2 instances of 3 servers.

Can you run CRXIR1 and CRXIR2 on the same machine?

I have CR XI R1 Developer edition installed on a workstation which I use to maintain imbedded reports in a large system written in VC++ V6, as well as several newer applications written in VB2003. The IT department issued me a new machine on which is installed VB2005. Now I receive errors in my VB applications when using the ExportToDisk function.
I understand that I need to upgrade to CR XI R2 to be compatible with VB2005. How will that affect my older code written in VC++ V6?

Well, you don't really need CR XI r2 to be compatible with .NET 2005 as .NET 2005 ships with CR 10.2. Now, if you want to be at CR XI with the COM apps (VB and C++) as well as .NET 2005, then you do need CR XI r2. (CR XI does not have assemblies for the 2.0 framework)
Personally, I would not recommend CR XI r1 and CR XI r2 on the same computer. Theoretically this should be OK, but from experience, I find that occasionally CR XI r1 and CR XI r2 just don't like to play together...
I'm not sure where you want to go with this now; resolve the export error, then move on, or?
Ludek

Can you use VGA and DisplayPort at the same time.

I have a T500 with the ATI graphics. I currently have it set up with only a VGA monitor. I am wanting to also get the DisplayPort to VGA adapter. Will I still be able to use both external monitors and my laptop monitor? If anyone has done this let me know. I have read that you can use VGA and DVI but neither of my monitors have DVI.

Exceptions are used when there are some mistakes , or exceeds the supposed values, we can highligt that in different colours for enabling the validator to notice easily. In this we are giving conditions for considering the value as exceptions. suppose, if the values is out of the range -1 to +1 then exception.
But conditions can be considered as the restrictions given in measure level also. So please elaborate what you meant by conditions

Can you use footnotes AND endnotes in the same document?

I just found out today that I have to have both footnotes (for comments and annotations) and section endnotes (for citations), to follow the formatting guidelines for my thesis... do you know if it's possible to use both with Pages '09? I've spent a long time formatting as it is and really don't want to transfer my document to Word or anything (since I'll lose some of my settings)... I would appreciate any suggestions! Thanks!

The style of footnote/endnote is part of the Document settings so it appears that only one applies per document.
You could switch between them and copy the endnotes as ordinary text into a document which has footnotes.
That would be the only workaround I can think of.
Peter

Can't recording Midi and Audio at the same time

I'm in GREAT need of help. I can't record midi and audio at the same time. I'm using an M AUDIO project mix I/O. I know this is VERY basic stuff but I can't seem to get it to work.I can record multiple audio at once. ANd I can record midi but not at the same time. PLEASE help . Is there a setting somewhere I need to change ? Thanks
Tracy

Hi!
Enable all audio tracks (R) you wish to record. Then make sure you select the audio instrument you are using on the left of the arrange page (track list). If you here your input, hold shift, then highlight (gray) the mentioned audio tracks you wish to record on. When R is red, and the proper tracks are grey, you can record. Hope that made sense!

Can you have two itunes accounts on the same computer?

Can you have two itunes accounts on the same computer and if so how do you access them without syncing each others music?

Yes. Use separate iTunes libraries(launch iTunes with the Shift(Windows) or Option(Mac OS X) key held down as needed), or different user accounts on the computer.
(100648)

My SB Audigy 2 card can't use headset and musicamplifier at the same time

Hi, i just bought a SB Audigy 2 [D400] and i have downloaded drivers and programs. I run Windows XP SP2.
The soundcard works fine but it is very very annoying that i physically have to change the jack in the green=line out jack from headset to musicamplifier when i want to use my musicamplifier and change back the jack in the green=line out from musicamplifier to headset when i just want to use the headset/headphones .
In the shop they told my that i can connect both amplifier and headset at the same time and then with creative software control whether there is sound in the headset or in the amplifier. But i can't simple get it work.
I tried to use the green to the amplifier and the headset/speakers in the black (line out 2) and then with creative speaker settings softeware choose headphones but still the ampliefier receive the sound and no sound in the headphones. Why? In fact no matter what configuration i try the headphones doesn't work.
But if i change the jacks so headset is in the green line out then only headset is working and the amplifier doesn't work no matter i put it in sort=line out 2 jack or orange=line out 3 jack.
Can somebody here tell me if it is possible or not to connect both headset and external amplifier and control by software which to play? and how?
please help, thx.
Michael

If you can have an ASIO compatible music playing system, then it might be possible to have system like you wish when using Creative Audigy 2 card. Since ASIO bypasses Windows Audio System, you can use both 'drivers' (ASIO - WDM/MME/DS) side by side.
Say you want to play a game (using headset /w mic) and someone other like to listen music at the same time. With ASIO capable system you can output your music for example to "center L/R (stereo) channels" and same time output sounds from other source (using MME/DS/WDM drivers) to normal output channel (Front L/R). Only thing is, you need to set your speakersystem to 4 or 6 (depending which other channel you're using) (and for better 'balance' to adjust "angle" on THX console. You get the THX console by installing Audigy 2 Zs software).
Try for example http://img332.imageshack.us/img332/463/djs9mo.jpg[/img] width="406" alt="Image Hosted by ImageShack.us" >
Another option:
Say you want to play music through external amplifier and play game online with your headset + microphone (eg. others but you listen the music, you play games)
--> try free http://img332.imageshack.us/img332/4589/tbp7rz.jpg[/img] width="406" alt="Image Hosted by ImageShack.us" >
If you use ASIO on BeatPort Player you can select L/R individually from the list(s). Same rules as described earlier.
= You can play from 2 different sources simultaoneusly (ASIO + WDM/MME/DS) to two different outputs without disturbance. The other (WDM/MME/DS) source is set 'automatically' output to (Audigy) "green" port, and the other (ASIO) to "black" or "orange" port (as set).
.jtpMessage Edited by jutapa on 09-5-2005 05:30 AM

Can you have 2 itunes accounts on the same computer?

can you have 2 itunes account on the same computer?

Yes, go to your Windows Control Panel and create another user,log into it, run iTunes and it's ready to rock and roll.
Transfer your content over via USB Key, Dropbox or external drive.
Heck the best thing would be to File > Backup library to disk with a bunch of DVD-R's, therefore you get a backup in the process!
Good Luck

Can you synch two itunes accounts on the same computer?

can you synch two itunes accounts on the same computer?

pflip wrote:
can you synch two itunes accounts on the same computer?
What do you mean by, "synch two itunes accounts"? You don't sync iTunes accounts.
WHat are yoru trying to accomplish?
iTunes account= Used to make iTunes purchases.
iTunes library = All your media and what you see when you open iTunes.

Can we use exceptions and conditions at the same time?

can we use exceptions and conditions at the same time? Are there any dependencies between exceptions an conditions?

Exceptions are used when there are some mistakes , or exceeds the supposed values, we can highligt that in different colours for enabling the validator to notice easily. In this we are giving conditions for considering the value as exceptions. suppose, if the values is out of the range -1 to +1 then exception.
But conditions can be considered as the restrictions given in measure level also. So please elaborate what you meant by conditions

Since upgrading to Mavericks, I can't run Mail and Safari at the same time.

Since upgrading to Mavericks, I can't run Mail and Safari at the same time.
Either Mail will crash or the iMac will run so slowly as to be unusable. With both running, the HDD spins constantly at a high rate of speed.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Can you mix DV and HDV in the same sequence?

Similar Messages

Maybe you are looking for