Can you provide some real time example of Fit Gap analysis .

Hi all,
Can you provide some real time example of Fit Gap analysis related to Functional.
Regards
Reddy

hi,
In my opinion and experience both functional and technical staff playkey roles in the fit-gap meetings and in the subsequent review of thefit-gap deliverable (which lists business requirements, fits, gaps, andalternatives to fill the gaps). Ideally the technical staff possessessignificant functional / business experience at least with that moduleso that he/she can help determine the cost/effort/technical scope if acustomization or interface is the preferred way to fill a particulargap. The fit-gap goes a long way in determining the overall scope ofthe implementation or upgrade project and is a critical success factor.It also needs to be completed very early in the project so thatresulting customizations and interfaces can be designed, created, andunit tested before the system test phase.
Thx,
waseem

Similar Messages

Can somebody give some real time questions for alv report

hi guru
can somebody give some real time questions for alv report.
answers also.
regards
subhasis.

hi,
The ALV is a set of function modules and classes and their methods which are added to program code. Developers can use the functionality of the ALV in creating new reports, saving time which might otherwise have been spent on report enhancement
The common features of report are column    alignment, sorting, filtering, subtotals, totals etc. <b>To implement these, a lot of coding and logic is to be put. To avoid that we can use a concept called ABAP List Viewer (ALV).</b>
Using ALV, we can have three types of reports:
   1. Simple Report
   2. Block Report
   3. Hierarchical Sequential Report
<b>Reward useful points</b>
Siva

Can somebody provide a real time dummy object regarding BADI

hi guru.
it's urgent.can somebody provide a real time dummy object regarding BADI.
please forward me.
deffinitely good points waiting for u.
thanks&regards.
subhasis.

Please check .
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm

Can you give some real-life use of tables in BW?

Hi,
In reading links and notes from here, I took a leap to try and understand how tables are used in the BW environment, by following:
se16
RSZ* then F4
then I Double click on:
i.
RSZRANGE        Selection specification for an element
If execute, I get a table with a several fields with values.
What is this table suppose to tell me and can you give me a real-life scenario where you made use of such a research to solve a problem?
ii.
RSZOPRATOR       Formula Operators
similarly, here I found fields with operators and mostly numbers.
What is this table suppose to tell me and can you give me a real-life scenario where you made use of such a research to solve a problem?
iii. Later I tried RSU* then
RSUPDDAT        Update rules key figures
Nothing recognizable here about the update rules.
What is this table suppose to tell me and can you give me a real-life scenario where you made use of such a research to solve a problem?
iv.
Also, sometimes here conversations like, research on which tables have the fields you need and lets generate reports against them. I though tin BW, reports are always generated against data targets (ODS, Cubes, etc). I didnt know of tables.
Can you give a real-life scenario where you had to combine fields in 2 or 3 tables and use them in project?
Thanks

Amanda,
There are many scenarios where you can use the tables behind the screen. But most of the times the scenarios are sophisticated requirement. Suppose your installation has many data targets and all are getting loaded nightly, weekly or even monthly intervals. Usually in most places the person on call will go and look at all the targets in the morning whether all the loads are successful (they would have beeped if something faild during loading at nights). Instead of going thru this manual process you can write an ABAP program which will look at the infocubes and ODS and see how many records were added, transferred, updated success or failure all kinds of information.
RSA1 is just a front end and all the information you see are all coming from tables which are stored here. go to SE80 or SE11 and search for the tables behind the screens. Every bit of detail that you see is coming from tables or available in tables. There are many tables and they are all relational. So you can pretty much do anything you like in accessing them. Please just read (SELECT) from them. Don't try to delete, insert anything unless you know what you are doing absolutely.
Hope this helps.
Good luck with your learning.
Alex.

Please send me some real time quetions in REPORTS/ ALV REPORTS

please anybody can send me some real time issues and quetions from REPORTS,
ALV REPORTS

Hi,
Report is basically a program which extracts the data from the database tables based on some inputs and gives the output as a list.
Report are classified as Classical Reports, Interactive Reports and ALV Report.
Classical Report is a normal report which just displays the output.User cannot interact with that report.
Interactive Report is nothing but, a user can interacte with the report.After a basic list is displayed, user can click on some field on the list which generates a secondary list giving the necessary information relevant to that field.
ALV Report is to provide users with a consistent, user friendly and functional method of manipulating the data, which appears on report lists. ALV provides more advantages than the normal report
Reports
http://www.sapgenie.com/abap/reports.htm
http://www.allsaplinks.com/material.html
http://www.sapdevelopment.co.uk/reporting/reportinghome.htm
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
http://www.sapbrain.com/FAQs/TECHNICAL/SAP_ABAP_REPORTS_FAQ.html
http://www.sap-img.com/
http://www.sapdevelopment.com
http://www.sapmaterial.com
ALV programs.
http://www.geocities.com/mpioud/Abap_programs.html
. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
ALV
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - http://www.sapgenie.com/abap/reports.htm
http://www.allsaplinks.com/material.html
http://www.sapdevelopment.co.uk/reporting/reportinghome.htm
Top-of-page in ALV
selection-screen and top-of-page in ALV
ALV Group Heading
http://www.sap-img.com/fu037.htm
ALV
http://www.geocities.com/mpioud/Abap_programs.html
Regards,
Priyanka.

Share small real-time example using Narrowing Cast & Widening Cast

Hi Guys,
I am trying to understand the concept of Narrowing Cast and Widening Cast and getting confused why we are using these Casts. When we can always access the method of Subclass using its ref object in Narrowing ) and use the Super class with its ref object (in Widening).
I understand the concept but could not understand under what situation cast is preferred.There are articles all over the web to explain the concept, but non told us why and when we are forced to us these CASTS.
I will appreciate if somebody can share a small real-time example where use of Narrowing and Widening Cast is advisable.
Thanks,

It looks like this topic has lost steam.
I'm surprised this isn't a more intense conversation. There are many applications that need to share data.
In my application I have many hundreds (in some few cases in the thousands) of different types of data streams including DIO, Analog, and many different types of Serial buses.
My application is already controlling the hardware and data streams, but others want to peak into my I/O including what is happening on the serial buses.
To create a 'get' function for each I/O in a web page would seem farily intense (although I could probably create a VI script to help build it).
I was looking for solutions along the lines of maybe coping the data into a VISA service (if that is possible), or publishing to a datasocket server, or creating a network published variable.
I need to be considerate of the possibility of hundreds of serial buses banging a service and the possible bandwidth impacts. So I'm searching for a solution that is both easy to implement and low on resources.
For now I'm leaning towards datasockets. Does anybody have an opinions on this?

Can you provides a Adobe LiveCycle Designer 8.0 download URL to me ?

i search it in google and adobe.com
but no result to me.
I installed the LiveCycle Designer ES v8.2, but my Webdynpro tool could not find it
so , i want get the version 8.0 to try.
can you provides some download URL of the Adobe LiveCycle Designer 8.0 to me ?

Hello
[url]https://www.sdn.sap.com/downloads/netweaver/java/700/disclaimer.html[url]
Regards,
GLM

I am trying to convert an Illustrator cs6 file to a PDF and every time I do it, I lose all text and images. Can someone provide some assistance? Thank you!

I am trying to convert an Illustrator cs6 file to a PDF and every time I do it, I lose all text and images. Can someone provide some assistance? Thank you!

It's always a good idea to supply platform and AI version info.
How are you "converting" the file? Are you choosing "Save As" and selecting PDF from the file format options? This will bring up additional save options. I would suggest "Illustrator Default" setting unless you have specific needs.

How to create a simple idoc in practice? can you provide an example?

how to create a simple idoc in practice? can you provide an example with full source code?

Try with the follwoing steps
Sending System(Outbound ALE Process)
Tcode SALE ³ for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ¡V Create Model View
Tcode BD82 ¡V Generate partner Profiles & Create Ports
Tcode BD64 ¡V Distribute the Model view
This is Receiving system Settings
Receiving System(Inbound ALE )
Tcode SALE ³ for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ¡V Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 ¡V Idoc List for inbound status codes
Message Type MATMAS
Tcode BD10 ¡V Send Material Data
Tcode WE05 ¡V Idoc List for watching any Errors
1)a Goto Tcode SALE
Click on Sending & Receiving Systems-->Select Logical Systems
Here Define Logical Systems---> Click on Execute Button
go for new entries
1) System Name : ERP000
Description : Sending System
2) System Name : ERP800
Description : Receiving System
press Enter & Save
it will ask Request
if you want new request create new Request orpress continue for transfering the objects
B) goto Tcode SALE
Select Assign Client to Logical Systems-->Execute
000--> Double click on this
Give the following Information
Client : ERP 000
City :
Logical System
Currency
Client role
Save this Data
Step 2) For RFC Creation
Goto Tcode SM59-->Select R/3 Connects
Click on Create Button
RFC Destination Name should be same as partner's logical system name and case sensitive to create the ports automatically while generating the partner profiles
give the information for required fields
RFC Destination : ERP800
Connection type: 3
Description
Target Host : ERP000
System No:000
lan : EN
Client : 800
User : Login User Name
Password:
save this & Test it & RemortLogin
3)
Goto Tcode BD64 -- click on Change mode button
click on create moduleview
short text : xxxxxxxxxxxxxx
Technical Neme : MODEL_ALV
save this & Press ok
select your just created modelview Name :'MODEL_ALV'.
goto add message type
Model Name : MODEL_ALV
sender : ERP000
Receiver : ERP800
Message type :MATMAS
save & Press Enter
4) Goto Tcode BD82
Give Model View : MODEL_ALV
Partner system : ERP800
execute this by press F8 Button
it will gives you sending system port No :A000000015(Like)
5) Goto Tcode BD64
seelct the modelview
goto >edit>modelview-->distribute
press ok & Press enter
6)goto Tcode : BD10 for Material sending
Material : mat_001
Message Type : MATMAS
Logical System : ERP800
and Execute
7)goto Tcode : BD11 for Material Receiving
Material : mat_001
Message Type : MATMAS
and Execute --> 1 request idoc created for message type Matmas
press enter
Thanks & regards
Sreenivas
Here Master Idoc set for Messge type MATMAS-->press Enter
1 Communication Idoc generated for Message Type
this is your IDOC
Take a look at this guide.
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/ale/configuration.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapdevelopment.co.uk/training
http://www.sappro.com/downloads/OneClientDistribution.pdf
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
Create The Extension Segment
Transaction: WE31
The first step in extending an IDoc is to create the new segments that will go into that IDoc. There are some rules that you need to follow when creating the segments:
- The name of each segment type must start with Z1
- For each field in the segment you need to define a field name and a
data element.
- The data element for the segment structure must be of data type CHAR.
How to create new segments:
Run the segment maintenance transaction WE31.
Type your new segment name, and click on Create.
Define the fields of your segment:
Field name
Data Element for the field (from the ABAP dictionary).
Do not change the Export length!
Save the segment
Run Segment -->Check to check the segment for consistency.
Release the segment for transport. Select Edit -->Set Release. Note that the Release column now has a check mark.
Create the Extension IDoc Type
Transaction: WE30
After you create the segments to be added to the extension type, you can create the extension type itself. Execute transaction WE30, enter the extension name, select Extension type, and click Create. You now have three options:
Create new type: Does not refer to other extension types
Create copy: Copies info from an extension type that already exists
Create successor: Extends an extension type from a previous release
of R/3. You can only have one version of an extension type for
each release.
Enter the Basic IDoc type that this extension type will extend.
The screen now shows the structure of the IDoc type you used as
a reference.
Position the cursor on one of the segments and click Create. This will insert an extension segment as a child of the selected segment.
NOTE: A segment cannot appear more than once in an IDoc type! You must control the use of duplicate segments with the segment attributes (the next screen).
The segment attribute screen appears. Enter the information and save.
Extension segments should not be mandatory (for future upgrades), and will need to have minimum and maximum number of instances defined. This answers the question, for each instance of the parent segment, how many instances of the child segment may we have?
You can press the Segment Editor pushbutton to view or change the segment definition.
Create the new Message Type
You can only use an extension IDoc type by assigning it to a message type. You can create a new message type for this.
First the message type itself needs to be created.
Transaction: WE81
Create a new entry and save. Use SAP established customer naming conventions (good form is to start with a Z and retain the rest of the related SAP message type, so, for example, MATMAS becomes ZMATMAS).
After creating the message type, associate it with the corresponding Basic IDoc Type and Extension Type. This relationship is used when IDocs are sent to or received from a partner to determine what segments are valid and what the hierarchy for those segments is.
Transaction: WE82
Create a new entry and enter the Message type, Basic IDoc type, Extension type, and Release, and save your data. Note: the release assignment is not valid for prior SAP releases.
One message type can be associated with many basic IDoc types; however, you need a one-to-one relationship for distribution via ALE.
regards,
srinivas
*reward for useful answers*</b>

Please provide me some real time gaps(SD) in projects and their solutions

hiiiiii everybody
please provide me some real time gaps(SD) in projects and their solutions for the sake of Interviews.
Thanks and Regards

hiiiiii everybody
please provide me some real time gaps(SD) in projects and their solutions for the sake of Interviews.
Thanks and Regards

(261680070) Q WSI-17 Can you provide us some UDDI registry sites?

Q<WSI-17> Can you provide us some UDDI registry sites?
A<WSI-17> WLS7.0 itself can be a UDDI registry allowing you to build your own enterprise
collection to store information about your trading partners (see http://edocs.bea.com/wls/docs70/webServices/uddi.html#1011066).
Other vendors provide UDDI services including the free XMethods web site (http://www.xmethods.org)
and IBM (see https://www-3.ibm.com/services/uddi/protect/registry.html).

Step by step, how did you arrive at seeing this agreement?

Can any one share Real-Time Senario of File to IDOC (CREAMAS) in XI?

Can any one share Real-Time Senario of File to IDOC (CREAMAS) in XI and if possible please share some impartent Screen-Shoots?
if u don't have CREAMAS senario please share Any of Masster data IDOC like MATMAS R DEBMAS.....
Tks
Durusoju.

Now start with these link.....
http://help.sap.com/saphelp_nw04/helpdata/en/80/8e3841e26cef23e10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/sdn/developerareas/xi?rid=/webcontent/uuid/a680445e-0501-0010-1c94-a8c4a60619f8 [original link is broken]
This might help you
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
Further, this thread deals with everything that is needed for a starter on XI. Do check them out,
JDBC Receiver: exact SQL statement
/message/527697#527697 [original link is broken]
And after you are done with the documentation probably you can go through this scenario,
JDBC Receiver: exact SQL statement
Also check the following threads which might help you a little more,
Learning XI
XI 3.0 Training
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/13926f23-0a01-0010-149c-c1170e7a25db
/people/sravya.talanki2/blog/2006/12/25/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-i
/people/sravya.talanki2/blog/2006/12/26/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-ii
/people/sravya.talanki2/blog/2006/12/27/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-iii
and once you are through ...follow the following links to weblogs which explain all the basic scenarios in XI
Following are the links to weblogs which will help to develop the basic scenarios.
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Proxy to File
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 - File to JDBC
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy - File to ABAP Proxy
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1 - File to File Part 1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2 - File to File Part 2
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping - Any flat file to any Idoc
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] - File to Mail
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address - Dynamic Mail Address
/people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi - Message Flow in XI
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm - Walk through BPM
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm - Schedule BPM
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM
/people/michal.krawczyk2/blog/2005/08/22/xi-maintain-rfc-destinations-centrally - Maintain RFC destination centrally
/people/sravya.talanki2/blog/2005/08/18/triggering-e-mails-to-shared-folders-of-sap-is-u - Triggering Email from folder
/people/sravya.talanki2/blog/2005/08/17/outbound-idocs--work-around-using-party - Handling different partners for IDoc
/people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi - Modeling Integration Scenario in XI
/people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible - Testing of integration process
/people/michal.krawczyk2/blog/2005/05/25/xi-how-to-add-authorizations-to-repository-objects - Authorization in XI
http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm - Authorization in XI
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Alert Configuration
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Trouble shoot alert config
/people/sameer.shadab/blog/2005/09/21/executing-unix-shell-script-using-operating-system-command-in-xi - Call UNIX Shell Script
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi - Transport in XI
/people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping - Using ABAP XSLT Extensions for XI Mapping
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure - Mail Adaptor options
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm - Collection of IDoc to Single File
/people/sap.user72/blog/2005/11/17/xi-controlling-access-to-sensitive-interfaces - Controlling access to Sensitive Interfaces
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - The same filename from a sender to a receiver file adapter - SP14
/people/prasad.illapani/blog/2005/11/14/payload-based-message-search-in-xi30-using-trex-engine - Payload Based Message Search in XI30 using Trex Engine /people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i - XI : Configuring CCMS Monitoring for XI- Part I
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter - XI: HTML e-mails from the receiver mail adapter
/people/sap.user72/blog/2005/11/22/xi-faqs-provided-by-sap-updated - XI : FAQ's Provided by SAP
cheers
Aveek

How can I generate a real-time highchart from my database data?

I have looked several links; however, I couldn't find a working demo showing how to implement a highchart using data from a database.
Objective: I want to generate a real time highchart line graph getting data from my database. What I want is very similar to the
HighChart Demo which provides a real-time highchart with randomly generated values. It is also similar by X-axis and Y-axis, for I want my x-axis to be "Time" (I have a DateTime column in my database) and y-axis to be an integer (I have
a variable for that as well in my database).
Please I need help in sending the model data to my razor view.
Note that I am already using SignalR to display a realtime table. I also want to know if it can be used to automatically update the highchart as well.
Below is the code snippet of my script in the view. I have used the code provided in
HighChart Demo link for generating the highchart. Please tell me where should I apply the changes on my code.
@section Scripts{
<script src="~/Scripts/jquery.signalR-2.2.0.js"></script>

<script src="~/SignalR/Hubs"></script>
<script type="text/javascript">
$(document).ready(function () {
// Declare a proxy to reference the hub.
var notifications = $.connection.dataHub;
//debugger;
// Create a function that the hub can call to broadcast messages.
notifications.client.updateMessages = function () {
getAllMessages()
// Start the connection.
$.connection.hub.start().done(function () {
alert("connection started")
getAllMessages();
}).fail(function (e) {
alert(e);
//Highchart
Highcharts.setOptions({
global: {
useUTC: false
//Fill chart
$('#container').highcharts({
chart: {
type: 'spline',
animation: Highcharts.svg, // don't animate in old IE
marginRight: 10,
events: {
load: function () {
// set up the updating of the chart each second
var series = this.series[0];
setInterval(function () {
var x = (new Date()).getTime(), // current time
y = Math.random();
series.addPoint([x, y], true, true);
}, 1000);//300000
title: {
text: 'Live random data'
xAxis: {
type: 'datetime',
tickPixelInterval: 150
yAxis: {
title: {
text: 'Value'
plotLines: [{
value: 0,
width: 1,
color: '#808080'
tooltip: {
formatter: function () {
return '<b>' + this.series.name + '</b><br/>' +
Highcharts.dateFormat('%Y-%m-%d %H:%M:%S', this.x) + '<br/>' +
Highcharts.numberFormat(this.y, 2);
legend: {
enabled: false
exporting: {
enabled: false
series: [{
name: 'Random data',
data: (function () {
// generate an array of random data
var data = [],
time = (new Date()).getTime(),
i;
for (i = -19; i <= 0; i += 1) {
data.push({
x: time + i * 1000,
y: Math.random()
return data;
function getAllMessages() {
var tbl = $('#messagesTable');
var data = @Html.Raw(JsonConvert.SerializeObject(this.Model))
$.ajax({
url: '/nurse/GetMessages',
data: {
id: data.id,
contentType: 'application/html ; charset:utf-8',
type: 'GET',
dataType: 'html'
}).success(function (result) {
tbl.empty().append(result);
$("#g_table").dataTable();
}).error(function (e) {
alert(e);
</script>

Hi Sihem,
Thank you for contacting National Instruments. Using the LabVIEW Real-Time module, you can do development without actually having a target. While viewing the project explorer window, you can do the following steps:
Right click on the project
Select New >> Targets and Devices
Select the "New Target or Device" radio button
Select the target you would like to develop on.Information about the LabVIEW Real-Time Module can be found here.
Regards,
Kevin H
National Instruments
WSN/Wireless DAQ Product Support Engineer

Help Required @ some real time application developement help!!

I have just started off with Jdeveloper and I need some very much real time examples so that I can give a head start and do applications as soon as possible
can anyone show me the links to files and I will make the application learning where and when the binginds happen and also where the exact structured flow is taking place.
Thanks
AC

Also check out the SR Demo
http://www.oracle.com/technology/products/jdev/samples/srdemo.html
Message was edited by:
Grant Ronald

Hello some real time questions

Hello guys,
Can any one help with this question.
1) Difference between Interactive & Drill down
repot? What specific statements do you use, when
writing a drill down report?
(is both are same or any difference is there)
2) What transaction do you use for Data Analysis?
3) When a program is created and need to be
transported to Production, does selection texts
always go with it? if not how do you make sure?
4) Can you make the CTS entries? How do you do it?
5) What are change header / detail tables? Have
you used them? ( i dont know what exactly is this?
and from which topic?)
6) What is currency factoring technique?
7) Is it possible to run host command from SAP
environment? How do you run?
8) What is the difference in using COMMIT WORK
within a called transaction & within a called dialog
module in an existing module?
9) What is the difference between the report
status & screen status?
10) what is the main diff between LSMW & session?
11) How to introduce authorization objects in
reports? How can you give authorization?
12) Diff between BAPI & RFC?
13) How field properties are set with * for
password?
14) How to create our own parameter ID in SE11?
15) What is a Ztable? How to create it?
(i think it is user defined table
and using Domain, Data Element & Table fields we
can create, if so, why it is to be called as only
'z' table, when we can careat with 'y')
<b>SOME REAL TIME QUESTIONS:</b>
1) How many SAP instances are there in your
organization?
2) What SAP version is in use for each instance?
3)What is the Hot package level for each instance?
4)What OS is employed per instance?
5)From where you get the request no?
Any one Answer this question it will be useful for all.
Thanks in advance.

Here are answers to some of your questions. Hopefully this will help you.
1) Difference between Interactive & Drill down
repot? What specific statements do you use, when
writing a drill down report?
(is both are same or any difference is there)
--> It's the same. You have events AT PF-STATUS, AT LINE-SELECTION, AT USER-COMMAND which are used to code for Interactive reports. Check this link for more details
http://help.sap.com/saphelp_46c/helpdata/en/d3/2e974d35c511d1829f0000e829fbfe/frameset.htm
2) What transaction do you use for Data Analysis?
--> What do you exactly mean by data analysis?
3) When a program is created and need to be
transported to Production, does selection texts
always go with it? if not how do you make sure?
--> Yes, it goes with it.
5) What are change header / detail tables? Have
you used them? ( i dont know what exactly is this?
and from which topic?)
--> All changes in SAP data are logged in Change Header and Item table. CDHDR and CDPOS are change header and item tables respectively.
8) What is the difference in using COMMIT WORK
within a called transaction & within a called dialog
module in an existing module?
--> Commit work commits all database changes which occurs before commit statement.
10) what is the main diff between LSMW & session?
--> LSMW and session are 2 different ways to update data in SAP database.
Check this out -
Session Method
LSMW
11) How to introduce authorization objects in
reports? How can you give authorization?
Need to add code for the same using Authority check command. Check this thread
ABAP Development
13) How field properties are set with * for
password?
--> You can modify field properties which displaying data. In this way you can set data to encrypt with 'X'.
14) How to create our own parameter ID in SE11?
-> Check out this thread
ABAP Development
15) What is a Ztable? How to create it?
(i think it is user defined table
and using Domain, Data Element & Table fields we
can create, if so, why it is to be called as only
'z' table, when we can careat with 'y')
--> using transaction code SE11. All custom objects in SAP can start either with Y or with Z.

Can you provide some real time example of Fit Gap analysis .

Similar Messages

Maybe you are looking for