Can you shift a region along to an 8th or 16th note?
I downloaded a MIDI file. Dragged it into the GB screen, no problem. Due to an error in the original, I found I needed to shift all regions to the level of the eighth note (quaver), but could only get them to the quarter note (crotchet). Is there something really basic I'm not doing? (You know: when a song starts on the half-beat, but you want it to start right on the beat--that's the problem I was trying to fix by dragging the regions.) Thanks.
Never mind. Found it here. http://www.bulletsandbones.com/GB/FAQPages/FineRegionAdjustments.html Turn off the "snap to grid" function under CONTROL. Simple. That site really is a wealth of knowledge. A shame about the colour scheme. Thanks.
Similar Messages
-
hi everyone, can you help me, because my ipod touch 5th gen, is not opening since this morning, i am just listening to music last night. And its not working anymore. THANK YOU
If not successful try the ramaining items of
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Can you sell an adobe muse website if the client does not have a license?
Can you sell an adobe muse website if the client does not have a license?
Hello,
You can sell the website to the client, but if you give out the .muse file to the client, then they would need a muse license to be able to open that file in Muse and make edits to the website (in case they do need to make edits). If you simply give out the exported files, then they can upload the site to their host, but they would not be able to make too many edits to the website. The In Browser Editor is a feature that is available if the site is hosted with Adobe Business Catalyst, where they would be able to make certain basic edit/changes to the site.
Cheers
Parikshit -
can you get a UK apple TV adapter beacuse it does not fit in to any of the socet at home ??
the appletv use a std cable same as my
playstation2, my dvdplayer my old unused cd player and many many other devices
it's not a special apple connector in the appletv -
Can you watch a rented/purchased movie on iPad 2 when NOT connected to wi-fi(airplane)
Can you watch a rented/purchase movie on iPad 2 when NOT connected to wi-fi (airplane mode)
Some people have posted that they've needed to be online when starting to watch a rental, so you may want to watch a few seconds whilst you still have internet connection - after starting to watch a rental you have 24 hours if you are in the US, 48 hours elsewhere, before it expires
-
How many times can you change the region of the computer
i need to know. is there a limit?
That's not what the above KB article says but I've never tried it.
This is what is states:
In Mac OS X, this dialog box appears the first time a DVD disc is inserted:
"Since this is the first use of a DVD disc, the drive region code must be initialized before playing.
"New Drive Setting: Region Code 1
"You can only change the drive region code 5 more times."
As I read that, once you set the region code, there are five additional changes permitted. As I said I haven't tried it and I'm not about to. -
Can you define custom regions?
I'd like to be able to create a region chart in Power Map but rather than using regions that are recognized such as postcodes or counties, I'd like to be able to define my own, in my case the areas that my sales branches cover.
I have a file which has all the coordinates for each branch to map the outlines.
Is this possible at the moment / is it in the September update?
Regards,
AlexisAlexis, can you submit this feature suggestion via the Smile and Frown button in the UI?
This goes directly to the product team.
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it! -
Can you check for data in one table or another but not both in one query?
I have a situation where I need to link two tables together but the data may be in another (archive) table or different records are in both but I want the latest record from either table:
ACCOUNT
AccountID Name
123 John Doe
124 Jane Donaldson
125 Harold Douglas
MARKETER_ACCOUNT
Key AccountID Marketer StartDate EndDate
1001 123 10526 8/3/2008 9/27/2009
1017 123 10987 9/28/2009 12/31/4712 (high date ~ which means currently with this marketer)
1023 124 10541 12/03/2010 12/31/4712
ARCHIVE
Key AccountID Marketer StartDate EndDate
1015 124 10526 8/3/2008 12/02/2010
1033 125 10987 01/01/2011 01/31/2012
So my query needs to return the following:
123 John Doe 10526 8/3/2008 9/27/2009
124 Jane Donaldson 10541 12/03/2010 12/31/4712 (this is the later of the two records for this account between archive and marketer_account tables)
125 Harold Douglas 10987 01/01/2011 01/31/2012 (he is only in archive, so get this record)
I'm unsure how to proceed in one query. Note that I am reading in possibly multiple accounts at a time and returning a collection back to .net
open CURSOR_ACCT
select AccountID
from
ACCOUNT A,
MARKETER_ACCOUNT M,
ARCHIVE R
where A.AccountID = nvl((select max(M.EndDate) from Marketer_account M2
where M2.AccountID = A.AccountID),
(select max(R.EndDate) from Archive R2
where R2.AccountID = A.AccountID)
and upper(A.Name) like parameter || '%'
<can you do a NVL like this? probably not... I want to be able to get the MAX record for that account off the MarketerACcount table OR the max record for that account off the Archive table, but not both>
(parameter could be "DO", so I return all names starting with DO...)if I understand your description I would assume that for John Dow we would expect the second row from marketer_account ("high date ~ which means currently with this marketer"). Here is a solution with analytic functions:
drop table account;
drop table marketer_account;
drop table marketer_account_archive;
create table account (
id number
, name varchar2(20)
insert into account values (123, 'John Doe');
insert into account values (124, 'Jane Donaldson');
insert into account values (125, 'Harold Douglas');
create table marketer_account (
key number
, AccountId number
, MktKey number
, FromDt date
, ToDate date
insert into marketer_account values (1001, 123, 10526, to_date('03.08.2008', 'dd.mm.yyyy'), to_date('27.09.2009', 'dd.mm.yyyy'));
insert into marketer_account values (1017, 123, 10987, to_date('28.09.2009', 'dd.mm.yyyy'), to_date('31.12.4712', 'dd.mm.yyyy'));
insert into marketer_account values (1023, 124, 10541, to_date('03.12.2010', 'dd.mm.yyyy'), to_date('31.12.4712', 'dd.mm.yyyy'));
create table marketer_account_archive (
key number
, AccountId number
, MktKey number
, FromDt date
, ToDate date
insert into marketer_account_archive values (1015, 124, 10526, to_date('03.08.2008', 'dd.mm.yyyy'), to_date('02.12.2010', 'dd.mm.yyyy'));
insert into marketer_account_archive values (1033, 125, 10987, to_date('01.01.2011', 'dd.mm.yyyy'), to_date('31.01.2012', 'dd.mm.yyyy'));
select key, AccountId, MktKey, FromDt, ToDate
, max(FromDt) over(partition by AccountId) max_FromDt
from marketer_account
union all
select key, AccountId, MktKey, FromDt, ToDate
, max(FromDt) over(partition by AccountId) max_FromDt
from marketer_account_archive;
with
basedata as (
select key, AccountId, MktKey, FromDt, ToDate
from marketer_account
union all
select key, AccountId, MktKey, FromDt, ToDate
from marketer_account_archive
basedata_with_max_intervals as (
select key, AccountId, MktKey, FromDt, ToDate
, row_number() over(partition by AccountId order by FromDt desc) FromDt_Rank
from basedata
filtered_basedata as (
select key, AccountId, MktKey, FromDt, ToDate from basedata_with_max_intervals where FromDt_Rank = 1
select a.id
, a.name
, b.MktKey
, b.FromDt
, b.ToDate
from account a
join filtered_basedata b
on (a.id = b.AccountId)
ID NAME MKTKEY FROMDT TODATE
123 John Doe 10987 28.09.2009 31.12.4712
124 Jane Donaldson 10541 03.12.2010 31.12.4712
125 Harold Douglas 10987 01.01.2011 31.01.2012
If your tables are big it could be necessary to do the filtering (according to your condition) in an early step (the first CTE).
Regards
Martin -
Can you help with Tcode to fill this SETUP table? not working for me.
Hi,
For the datasource 2LIS_11_VASCL (SD Sales: Schedule Line Item), I need to fill the Setup Tables via OLI*BW
I understand the * to be the application number, which in this case it is 11 but I get a message that OLI11BW does not exist.
1. Can you help me with the tcode to fill the setup table for 2LIS_11_VASCL?
2. Since there are several datasources with the same application number 11, how do I fill only 2LIS_11_VASCL without filling the others:
2LIS_11_VAHDR Sales Document Header Data
2LIS_11_VAITM Sales Document Item Data
2LIS_11_VAKON Sales Document Condition
2LIS_11_VASCL Sales Document Schedule Line
2LIS_11_VASTH Sales Document Header Status
2LIS_11_VASTI Sales Document Item Status
2LIS_11_V_ITM Sales-Shipping Allocation Item Data
2LIS_11_V_SCL Sales-Shipping Allocation Schedule Line
2LIS_11_V_SSL Sales Document Order Delivery
ThanksOk,
I tried that and it basically bring you to OLI7BW as suggested above.
1. At this point, how do you know which of these it is actually filling:
2LIS_11_VAHDR Sales Document Header Data
2LIS_11_VAITM Sales Document Item Data
2LIS_11_VAKON Sales Document Condition
2LIS_11_VASCL Sales Document Schedule Line
2LIS_11_VASTH Sales Document Header Status
2LIS_11_VASTI Sales Document Item Status
2LIS_11_V_ITM Sales-Shipping Allocation Item Data
2LIS_11_V_SCL Sales-Shipping Allocation Schedule Line
2LIS_11_V_SSL Sales Document Order Delivery
2. Also, what does it mean when after running OLI7BW wide, with no restriction on my system, still rsa3 shows no records for 2LIS_11_V_SCL?
Any other way to confirm that there may not be any data in 2LIS_11_V_SCL?
Or any way, to make an entry which reflect in 2LIS_11_V_SCL so that I can verify if OLI7BW actually fills the setup table?
Thanks -
Can you transfer everything from your ipod to a new computer, not just itunes purchases
Can you transfer all of your info from the ipod back to the computer? My computer crashed and I cannot get to the back up to transfer to my new computer. I have only been able to transfer itunes purchases.
Refer to this great User Tip from tt2., it covers your problem which suggest a few 3rd party Apps for recovery.
Have anice day! -
My ipad2 was stolen a week ago? Can you help me what to do to blocked my ipad and not be used by anyone? I used different address and i even not put any password lock ang Find my iphone is on? also the location area is not on? please help? Thanks a lot if you can suggest anything? i have so many documents and files in my ipad?
These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
Apple Product Lost or Stolen
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st olen
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
How to Find Your iPad Serial Number
http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
Cheers, Tom -
I am taking a class about using textures...most folks are using photoshop....I don't want to tackle that and try to learn about textures..
can you invert a mask in Elements 12...or is there another way to achieve the same result?
thanksthanks..
I am having trouble with the keyboard " If you’ve already added the mask, you can invert it by typing command/control + i while the mask is active for editing. "
so maybe I will try again...would love to get it working!
many thanks for your prompt reply -
Can you tell me what I should do? My iPad shows the following message, " This iPad has not been backed up in 4 weeks. Back ups happen when this iPad is plugged in locked and connected to Wi-Fi" Thank you in anticipation you will be able to help me, Ray Mill.
Try a reset. Hold the Sleep and Home button down (together) for about 10 seconds until you see the Apple logo. Ignore the red slider.
-
Can you connect a mac book pro with a samsung galaxy note via blue tooth
can you connect a macbook pro with a samsung galaxy note via blue tooth
it seems that they will pair but as soon as the mac has connected it automatically dissconnects
i was informed in the apple store before i bought it that it would be ok
any thoughtsThe USB port on the Time Capsule is used only to connect a hard drive.
Connect your Mac using an Ethernet cable to one of the LAN <-> ports on the Time Capsule if you do not want to use wireless. -
How many times can you reset the Region?
A few minutes ago, I put a DVD into my MacBook for the first time.
It was a Region 1 disc, and immediately Apple's DVD player opened and began playing the disc. I was rather surprised, because the first time I inserted a DVD into my Mac Mini, Apple's DVD player opened, but informed me that the region must first be set before I could play a disc.
(I know that the system preferences can be set so the machine "does nothing" when a DVD is inserted. It isn't the fact that the DVD player opened that surprised me--it's the fact that I wasn't given a region-setting warning before the DVD began playing for the first time.)
I then stopped the DVD player, ejected the disc and inserted a Region 2 disc. Again, Apple's DVD player opened, and when I hit the play button, I received the notice that the drive's region was set for 1 and would have to be changed to play the Region 2 disc.
However, what was strange is that the message indicated that I only had 4 region changes remaining.
I always thought we were allowed 5 region changes.
Am I wrong, or is it possible that the region setting on my MacBook had already been set (and perhaps even reset) before I purchased it?I encountered the same thing when I played a DVD in my MacBook for the first time, I had assumed it would ask me as my other Macs had done. However, it appears that since Panther, an administrative user does not get asked this question. The following is from the Info Article on DVD Regions
"In Mac OS X 10.3 Panther and later, users with administrative privileges aren't prompted to change the region the very first time a DVD-Video disc of a single region is inserted. Instead, the region of the DVD drive is automatically set to the region of the DVD disc that was inserted."
The article also indicates that 5 changes is the standard, so if you were logged in under an admin account it automatically set the first one for you.
MacBook, Intel Mini Duo, Dual G5, iMac FP800 Mac OS X (10.4.6)
Maybe you are looking for
-
Error: 16 when trying to start trial version of elements 9
Hi. I might have posted this in the wrong forum the first time around (my first post on adobe ever...), so I try this one instead... I have been using pse6 for a few years, and because this version didn't support .NEF-files from my new Nikon D7000, I
-
I am using the current version of Numbers (3.2). The problem I am facing is that it seems to be impossible to export a spreadsheet with invisible grid lines to a PDF. Every time I do so, thin (I guess 1px) grid lines appear in the PDF where the shoul
-
Playing music in iTunes from an external HD
I moved 600gbs of music to an external HD to save HD space and run iTunes from the external. After the transfer, I told or pointed to iTunes where the 'new' music is on the external HD but iTunes will not read the music - it is asking me to find eac
-
Map Loader 3 doesn't see Internet connection
Hi, I have installed Map Loader 3 on my XP Pro sp3 workstation that is connected to the Internet via a Workgroup Server running MS SBS 2003 Premium. Whenever I start the Map Loader application it quits immediately with the error message "Connection t
-
Hey, Is it possible to make cd's auto rip when you are on the front row screen? Instead of having to quit front row and going onto iTunes? Thanks in advance.