Can you use 1 apple id for 2 different devices at the same time

i have the iphone 5 and recently brought the ipad with sim but i cant seem to get the new sim working on the ipad it keeps conecting to the iphone and using that number any ideas ??? thanks

How to use multiple iPods, iPads, or iPhones with one computer
http://support.apple.com/kb/HT1495
How To Best Use and Share Apple IDs across iPhones, iPads and iPods
http://www.nerdsonsite.com/blog/2012/06/07/help-im-appleid-confused/
 Cheers, Tom

Similar Messages

  • Can you use 2 sets of bluetooth headphones at the same time with the Ipad 4?

    Hi, I was wondering if anyone could tell me if I can use 2 sets of bluetooth headphones at the same time with the Ipad?
    It is so my children can watch a film or listen to music together.
    Thanks

    No

  • Can you pass multiple files to Business Catalyst at the same time?

    I need to pass information from a client. The infromation is split into several files. I can not access the files to combine them to send as one document to BC. Can I send the two files over even though they do not full fill the necessity of all the user information. File 1 is the personal information and has no other details. When this fill crosses over BC accepts with no trouble. When the second file goes across the personal information is not there but the form details are and this file wipesout the DB. Going through debug when the first file executes I see the data on the BC side. When the second file executes the data is all gone. I cannot combine both files to create one document. Files do not have the same number of users so import of file with file helper would not work since it needs to meet certain requirements to process correctly everytime. By combining the two files would give a different number of tabs than what file helper is looking for and by that matter the data may not be in the correct order. Retrieving the data from the file also would not work since I would have to retrieve from both files at the same time and there would be issues if the user does not occur on both files.
    Please help.
    Thank you,
    Carlos

    Wilderness08 wrote:
    To save time with videos that are not critical, can you capture one video to Premiere Pro at the same time you are authoring to Encore a previously captured video?
    The short answer is yes.
    I have just done that and I am happy to report that it worked like a charm.
    I captured from a DVCAM tape via firewire using PPro CS6 while authoring a Blu-ray disk in Encore CS6.
    No frames were lost during capture and my test blu-ray project was completed without a hitch.

  • Can you capture 1 video and author another at the same time?

    To save time with videos that are not critical, can you capture one video to Premiere Pro at the same time you are authoring to Encore a previously captured video?

    Wilderness08 wrote:
    To save time with videos that are not critical, can you capture one video to Premiere Pro at the same time you are authoring to Encore a previously captured video?
    The short answer is yes.
    I have just done that and I am happy to report that it worked like a charm.
    I captured from a DVCAM tape via firewire using PPro CS6 while authoring a Blu-ray disk in Encore CS6.
    No frames were lost during capture and my test blu-ray project was completed without a hitch.

  • How can i use both Windows and Mac os at the same time on my iMac

    How can i use both Windows and Mac os at the same time on my iMac

    You can use Parallels desktop or VM Fusion to run both operating systems at the same time. Both programs work well, but I personally perfer VM Fusion.

  • TS2972 I would like to share my iTunes libraries with my Apple TV from both my iMac and Macbook Pro, but I use the same iTunes account on both devices. Is it possible to link my Apple TV to both devices at the same time?

    I recently purchased an Apple TV, and I currently have it linked to my iMac with my iTunes account. I also have a newer MacBook Pro that has some different iTunes media on it than my iMac does, but they share iTunes accounts. Is it possible to link both devices at the same time, have access to media on both computers, and use the same iTunes account on both computers?? It seems Apple TV will only link to one iTunes account per computer, but can access multiple computers if different iTunes accounts are activated on those computers.

    You can share multiple libraries with the Apple TV, they don't even need to use the same iTunes account. Just make sure that you use the same ID for homesharing on all devices.

  • Can one iTunes Radio account be used on more than one device at the same time?

    With an iTunes Match account, can ad-free iTunes Radio be used on two devices at the same time on that same account?

    Hi,
    Yes.
    Jim

  • Using more than one input device at the same time

    Is it possible to use more than one input device at the saem time in logic express. For example I have a fire wire input device and a usb input device can I get Express to recognize both of these at once and so have a total of 4 ins which would be great since Im transfering tracks off my ADAT and it would be less track to have to line up.
    Thanks

    Hi,
    yes, it should be possible by creating an aggregate device. Google for it or search this forum. There are many tutorials how to set it up.
    Have fun!
    Fox

  • Can you use Apple TV for a second monitor to a TV (Not mirroring)

    I'm thinking about buying an Apple TV so I can have a wireless second display for my MacBook Pro. Am I able to do this or can I only mirror the one display? Am also what is the minimum Internet speed needed for AirPlay

    OK - I now have the bits and have set up the system...
    Airparrot is great. It allows you to select which display to mirror on the Apple TV. It also allows you to send audio to the Apple TV.  I have EyeTV and Front Row set up to use the second dispaly and Airparrot successfully sends this to the Apple TV. However my audio synce problems  remain. Whenever I use digital (toslink) sound from the iMac the audio is out by several frames. Unfortunately this even happns if I send both the video and audio to the Apple TV. It is unwatchable. This means I will need to switch to the RCA audio output on the iMac (which is AUX in on the hifi) whenever I want to send video to the AppleTV.
    If I play video from the Apple TV (using home sharing) then the audio sync is much better. But this means that Eye TV wont be accessible from the Apple TV menu (now there is an opportunity for a clever programmer).
    I have used QT Sync to adjust the sync when sending video to the Apple TV via quicktime. In speech the lips sync at a difference of 8 frames. However QT Sync is no good for playing video from Front Row or EyeTV. There is another programming opportunity...(adjusting sync for all types of output - it would be a good addition to Airparrot).
    So in short, I cannot use Apple TV to play TV from the iMac. And the Apple TV menu is much more limited, in many ways, than Front Row.
    (the iMac is still running Snow Leopard - which may be partly causing the problems - but there are several reasons why I dont want to upgrade it to Mountain Lion)

  • Can you use a roaming network and wireless extender at same time?

    Greetings community - I've been struggling with an attempt to extend my wireless network for some time now. Please forgive my ignorance on the topic - I realize how 'simple' this is for many of you.  Let me summarize:
    What I have functioning:
    1. Comcast telephony modem
    2. 5th gen Airport Extreme as main wireless router connected to modem via Ethernet (corner of floor 3)
    3. 2nd gen Airport Express as wireless extender (hooked to a stereo on floor 2)
    What I want to accomplish:
    1. I have poor wireless signal on my sun porch (corner of floor 1 opposite side of building as modem)
    Extra equipment I have:
    1. Another 5th gen Airport Extreme
    2. Another 2nd gen Airport Express
    What I have tried (and failed at):
    1. Initially I set up the second Airport Extreme as a second wireless extender and placed it at a further point away than my first wireless extender.  I quickly realized that set up does not function appropriately and one cannot connect to the further extender (I read about that on the apple forums).
    2. I tried placing the second Airport Extreme in a different part of the house at equal distance from the main router as the first wireless extender.  It's capability to extend was minimal if any.
    3. I tried connecting the Airport Extreme to the main router via an Ethernet cable with the hopes of creating a roaming network (which I read about on the apple forums). I would have to come up with a way to run the Ethernet through the house but I'm willing to cross that bridge later.  Once I got that set up, the 2nd gen Airport Express which was previously set up as a wireless extender is no longer recognized. Argh!!
    Questions/Theories/Suggestions:
    1. Is it possible to have a wired extender (via Ethernet) function at the same time as a separate wireless extender all connected to the same router?  If so how do I do it?
    2. I thought about keeping Airport Extreme #1 wireless connected to Airport Express #1 and call that Network 1.  Then plug Airport Extreme #2 directly into the modem to create Network #2 and use Airport Express #2 as wireless extender.  When I tried plugging both Airport Extremes into the modem, they both stopped functioning.
    3. Do I get a second modem to put somewhere else in the house and use Airport Extreme #2 and Airport Express #2 in that fashion?  My guess is Comcast will try to charge me a separate internet access fee to do that (boo!!).
    I know there are a lot of brilliant folks out there.  I'm sure someone can read this and see the 'obvious errors' in my ideas and attempts.  I'm certainly open to new suggestions as well. 
    Thank you in advance for your time and advice.
    - The New Guy

    Is is possible to rename the AEx 2 a different network name from the AEx1 and AE 1 (even though they are all connected to each other)? And say it is possible, would that potentially preventing the jumping?
    No, in extend wireless the names must be the same..
    However since you are creating a network on AE2 which is extended by AEx2 then you can indeed use a different name.. but it must be both,, AE2 and AEx2.
    2. Even more crazy - if I did (could) give the AEx 2 a different network name, could I use my AE 2 as a wireless extension to that second network?  Or is this just getting out of hand now?
    You have lost me now.. there are ways and means.. but let me recommend a better solution.
    Use EOP (homeplug in US) adapters if you cannot run ethernet. Multi-storey houses where you have heavy concrete construction are never going to work well with wireless alone. You are much better getting ethernet properly installed (which is the only 100% guaranteed method).. or buy a set of EOP adapters and give them a try.. they work in some cases and not others.. but better than wireless when they do work.
    Otherwise I think you need higher power wireless routers.. but I can suggest you do the setup in a more controlled manner.
    In other words do not use auto as per the airport utility.. use very short wireless names, different for both bands.. and fixed wireless channels.. then test which band works better.. Then you can do a link.. which will be slow but might give you better performance.
    So..
    Link1 Main AE1---- AEx1 This is wireless extend.
    Link2 AEx1--ethernet--AE2. AE2 is in bridge mode and is also set to create a wireless network. (Use different wireless name here to prevent confusion).
    Link3 AE2-----AEx2 Second wireless extend.
    This overcomes the Apple limitation on multiple extends. It is not great setup but might get wireless to where you need it.. And better speed than you can get now.
    NOTE>. I would personally never do this.. I will run ethernet forevermore.. having tried and tried in various places and using all kinds of equipment.. my conclusion is.. wireless is not suitable.. unless you can get enough signal in from one AP.. everything behind it must be ethernet.
    It is much more expensive in some cases.. but ethernet works.. nothing else can be guaranteed to work.

  • Can you use more than one computer to edit the same Premiere Elements Project?

    I am using Premiere Elements 10.  I have built a new project on my desktop computer because the desktop has a firewire port to capture video from my camcorder and my laptop doesn't have a firewire port.  The project is stored on my home network.  I seem to be able to do editing fine using the desktop computer that the project was created on, but it won't load up right on the laptop for editing.  Premiere Elements is configured the same on both computers.  I guess my question is - does Premiere Elements store something on on the computer that the project was created on that is not being stored on the network drive?    How can I fix the problem so that I can edit on my laptop? The laptop is a top of the line Dell XPS with an i7 processor that I use for other Premiere projects, so the laptops ability is not an issue.
    Thanks
    Bill

    Yes, having files stored on a HDD, but having the letter change between machines is a problem. The Project file (PREL) is only an XML database, with links to the Assets. Those links are Absolute Paths, so if anything changes, from drive letter, to file name, the link is broken.
    I have over a dozen externals, that I use to migrate Projects between my main two computers. Each has had its drive letter set in OS of each computer. I started with Z:\ and worked down. Each drive has a lable on it with the designated drive letter. Unfortunately, I ran out of letters, as the workstation has a ton of HDD's and burners, so I had to start over. That does mean that I cannot have both Z:\ drives plugged in at the same time, but that has never been an issue. I wish that Windows would allow for double drive letters, say ZZ:\, but still, I have a handful of letters to use - just too many externals for those letters...
    Happy editing,
    Hunt

  • Can you have Firefox and IE browsers both at the same time and if so, do you have the choice of choosing one for a default browser?

    I am using IE Explorer now presently. I want to be able to download and install the SEO Blogger tool from Wordtracker but it says that I have to have Firefox as the browser. Since I have everything else already set up under IE, I don't want to have to change all that just so I can download one program.
    Can you help?
    Thanks,
    David Craig

    You can have both browsers installed and running at the same time. You can also choose what one to have as the default browser.

  • Can you use more then one micro photo on the same comput

    i have had my micro photo for a year it works great i just bought another one but my computer wont recognize it. what gives?they are the same player zen micro ohoto 8 gigs

    It should work fine. Both my Microphoto's work connected on XP Pro at the same time, I just have to keep track of which one has what kind of music. Have you tried scanning for plug and play devices, what kind of operating sys are you running? And what software are you trying to sync with.
    Message Edited by VRevolution on 05-23-200706:45 AM

  • Can i use a track pad and mouse at the same time

    can i use a track pad and a mouse at the same time

    If you mean can you have them both connected at the same time, then it's a yes. I have both connected and use the mouse for some functions and the trackpad for others... works a charm.

  • Can you charge and play shuffle (2nd gen) at the same time?!

    we purchased a shuffle to run our 'on hold' music at work, and its a pain in the arse to remember to charge it every night. im so used to my iPod video that lets me charge and play at the same time...
    any suggestions?!

    Hi Jen,
    I have the USB Power Adapter plugged into a power
    outlet and the shuffle plugged into the adapter. I'm
    running a headphone to RCA cable to an audio
    receiver's inputs. This allows me to listen to all my
    songs on the Shuffle without needing to have a
    computer near by. I've been using this set up since I
    bought the Shuffle. I have to mention that the
    Shuffle I own is 1st Gen...
    Again, hope this helps.
    With all due respect, Rick, Jen (the original poster) was asking about how to charge+play a SECOND GENERATION Shuffle...you might note that fact is even included in the Subject field...
    But now that you've mentioned yours is a 1st Gen Shuffle... 1st Gen Shuffles ARE available from the online Apple Store as refurbished for $49. Perhaps she should think about getting one of those?

  • Can you listen to iTunes on two computers at the same time?

    If I've got iTunes playing on one computer, is it possible to listen on another computer on the same network what's playing on the first computer? I've often got two computers on the go over two floors and it would be smart if they were playing the same music at the same time. Thanks for your help.

    Hi Andy, if you want to listen through remote speakers connected to an AirPort Express you can choose the remote speakers (or computer) from the pop-up menu at the bottom of the iTunes window
    However, to the best of my knowledge you can only listen to iTunes through one set of speakers at a time.

Maybe you are looking for