Can you use a wired ethernet to internet AND wireless to apple tv

since getting the appletv, i had connected it wirelessly through the apple extreme (n) base station and kept my internet setup with gigaport #1 with no problem. since the latest updates, apple tv is very sensitive....does not work if the wired ports are used and will not even show up in iTunes.....anyone having similar problems? anyone able to fix this? thanks

thanks WC.
i saw this post and went to my account, changed it from m/c to none and saw my total update (I had recently rented 2 HD movies so my account decreased accordingly)
BUT, before I left the pay't information screen, I chose cancel instead of done. I wanted to leave my CC there for iphone purchases (and b/c we can't use GCs yet).
Anyhoo, it still worked - and I'm glad it did b/c I just purchased $100 in GCs from the latest best buy sale.
Cheers,
Keebler

Similar Messages

Can you use home sharing betweeen a pc and a mac

can you use homing sharing between a mac and a pc?

in iTunes on both machines turn on home sharing from the advanced menu using the same Apple ID.
have a look at this support article.

HT1947 Can you use your iPad alone for sharing iTunes music to apple tv without having your pc on?

Can you use your iPad alone to share iTunes music to apple tv without having to use your pc?

Do you have any music stored on your iPad or is it all on your PC?
If the music is stored on your iPad, then double tap the home button, swipe (left to right motion) and you will see the volume/brightness controls/AirPlay. Tap on AirPlay and select ATV. Then go into the music app

Can you use time capsule for your mac and have readynas backup your pc's on the same network

Can you use time capsule for your mac and use readynas to back up your pc's on the same network

Sure, that is trivial setup.. they both have different names and IP addresses.
You should be able to use ReadyNas for TM backup but you should check the latest state of play for that.

Can you use Time Capsule on a windows and 2 macs at the same time.

Can you use Time Capsule on a windows and 2 macs at the same time as either a backup for one and a seperate HD drive for two?

Yes.
From one viewpoint the Time Capsule is just NAS (Networked Attached Storage) and it supports the file sharing protocols necessary for both Windows and Macs.
From the viewpoint of the Macs it can also be used by Time Machine for backups.
As NAS it can be used for storing files, and there are many backup software packages that support NAS on both Windows and Macs.
In addition from a networking point of view it can serve as a router, wireless access point etc.

Can I use HP Pro 8600 with usb and wireless at the same time

Can I use HP Pro 8600 with usb and wireless at the same time? Sometimes I cannot get the wireless to work, it seems to be my laptop. It would be nice if I could use the usb, but it doesn't work. What should / can I do, if anything?
Sam

Hi,
Same physical printer but when connecting to SAME computer using both USB and wireless it becomes two (logical) printers. Probably your default prnter is the wireless one, you have to select the right printer before print .
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Can i use iport capsule to store movie and play with apple tv, can i use iport time capsule to store movie and play with apple tv?

Hi
Can i use iport storage to store movie and play using apple tv?

hi Alley_Cat
Thanks, if understand it correctly, apple tv was not able to browse directly content/storage from iport capsule?
tq

Can you use a debit card to purchase and download apps or does it have to be a credit card

can i use a debit mastercard to download apps or does it have to be a credit card? I used my debit card to buy and download afew apps but now i cant even download free apps without being asked for my billing info and when i enter the info it says it is incorrect when it isnt.

I think it has to do with the way that you order thru ATT. When you order, they put a hold on your account for the purchase amount. In 3-5 days( for PNC) when PNC doesn't see the purchase go thru, they release the funds. ATT will take the money when your phone ships. If you go to the Apple store, they don't take a deposit. They put your name on the priority list and you only give your card when you pick your phone up.

Can you use migration assistant between 10.4 and 10.8

I'm trying to use migration assistant to transfer applications and files from a G5 imac running 10.4.11 to a brand new iMac i5 on 10.8.2. Have connected through ethernet cable but machines don't recognise each other!
Is this an OS problem or a PowerPC vs Intel issue?

Be careful about trying to migrate applications from a G5 to an Intel mac running Mt. Lion (10.8.x). They may not work. Rosetta is no longer supported, so older applications that ran on your G5 may not run at all on your new iMac. And even some 'universal' apps that ran on 10.4 (Tiger) will not run well if at all on Mt. Lion.
It would be best if you install current versions of the applications you are interested in, from scrtach, instead of migrating what are now very old versions.

Can you use PSE files between windows pc and mac book?

Can you open and save PSE files on a windows pc and mac book that are on an external HD?

Yes, The operation works like it is for all other softwares.
Thanks,
Garry

I can't find icloud setting in my internet and wireless options in the system preferences though help pages assure me I can. how do I do this ?

How do I set up icloud on my macand my ipad ?

Your signature says you are running 10.6.5: this is not compatible with iCloud. The minimum requirement is Lion 10.7.2; the preference pane does not appear on earlier systems.
You can set up iCloud on your iPad as long as it's running iOS5 or 6:
http://www.apple.com/icloud/setup/ios.html
You are severely limited in what you can do in Snow Leopard: you should update to 10.6.8, and then the situation is described in this page:
iCloud and Snow Leopard

Can I use my WRT54GS as an internet & printer wireless router?

... or is the WRT54GS only for internet & I need to use a different product for wireless printing?
Thank you for any help you can give,
Michele

Is your Printer is a Wireless Printer or its an Normal USP port Printer ?
If your printer is an Normal USB Port printer then you need to buy a Print Server ( WPS54G or WPSM54G). So once you configure your Print server you will be able to Print from all your computers Wired / Wirelessly.

How can you use one NetStream to publish video and audio from another NetStream in AS3?

Let's say one of your client programs in AS3 is able to receive live video and audio from a NetStream and play it on the screen. How could you make it also take that video/audio stream that it's receiving, copy it over into another NetStream, and publish it elsewhere? I need to know how to do with this regardless of whether RTMP, RTMFP, or some mixture is involved. The reason why the stream needs to be relayed this way is a real long story, but it's necessary in this particular case. Thanks!

RTMP is TCP, which has higher overhead and latency because it guarantees packets are delivered (handshaking, causing latency and overhead). It also doesn't allow you to share connections directly between clients forcing the server to do all the work.
RTMFP uses UDP, which is a choice protocol for streaming video because it's the opposite. It's lossy which decreases latency and overhead from no retransmissions and most importantly (in some applications) allows you to connect directly from one Flash Player to another Flash Player (p2p) so the server overhead is dramatically reduced. The server is only required to negotiate the initial connection and then it's up to the clients to continue to facilitate that.
How you code your one to many or many to many relationship broadcast network will be based entirely on which of those you choose.
URLStream is very common to use in p2p. Here's an older Adobe article on p2p and an alternate quick old video tutorial (FP10) as a quick simple example of p2p over RTMFP you can view the source of.

How many apple devices can you use with the same e-mail and bank details

Any help needed thanks guys

You can use as many as you own and want to use. If you have 10 iPads, 10 iPhones an on and on and on .....
Are you having a problem with something?

Can you use a custom cursor with drag and drop?

Hi there! I'm a newbie flash user and working on a simulation for a graduate course in instructional design. I'm using Flash Professional CC on Mac. Here's what I'm trying to do. I have several draggable sprites on the stage and three target sprites. I have specified the original x,y locations of the sprites and have set the end x,y locations as those of each of the three targets. Items must be dragged to one of the three targets.
Some questions:
1. Can I specify more than one End x,y location for a draggable sprite? I'm creating a lesson to teach kindergartners how to sort lunchroom waste. If they have a napkin, for example, it could either go into the compost OR into the recycling. In cases like this where an item could really be placed into more than one bin, I want them to get it right if they do either of those things, rather than forcing them to choose which one.
2. To make my project more "fun" for kids, I wanted to customize the cursor with a graphic of hand. When I tried this in the flash file it works perfectly until I add the drag and drop functionality for the wasted items. Then the cursor will more around but not pick up any items. Once I revert back to the standard pointer, the correct drag and drop functionality is restored.
3. I have it set to snap back to the original location if learner attempts to drop the item on the wrong target. I want to be able to play a sound file when that happens, as well as play a sound file when it lands on the correct target, as well as shrink the item and change its opacity so that it appears invisible. I want to give the illusion of it being placed into the bin. I have no idea as to the proper way to code these events so that they happen.
4. I've watched dozens of hours of youtube tutorials before coming here. I'm a quick study, but am very new to action script. In one of the videos the developer showed referencing an external action script file which I don't think is an option in CC. The coding method he used seemed much more streamlined and "clean" than the chunks I'm working with now. Is there an easy way for me to code information about these objects than the way I've got it here now? I hate starting new things with bad habits. The perils of self-teaching.
Thanks!
I'm pasting my code from the actions panel below so you can see what's going on:
stop();
/* Custom Mouse Cursor
Replaces the default mouse cursor with the specified symbol instance.
stage.addChild(customcursor);
customcursor.mouseEnabled = false;
customcursor.addEventListener(Event.ENTER_FRAME, fl_CustomMouseCursor);
function fl_CustomMouseCursor(event:Event)
customcursor.x = stage.mouseX;
customcursor.y = stage.mouseY;
Mouse.hide();
//To restore the default mouse pointer, uncomment the following lines:
customcursor.removeEventListener(Event.ENTER_FRAME, fl_CustomMouseCursor);
stage.removeChild(customcursor);
Mouse.show();
//set up variables and objects for dragging
var offset:int = 10;
var appleStartX:int = 243;
var appleStartY:int = 156;
var appleEndX:int = 522;
var appleEndY:int = 22;
apple.buttonMode = true;
apple.addEventListener(MouseEvent.MOUSE_DOWN, startDragging);
apple.addEventListener(MouseEvent.MOUSE_UP, stopDragging);
var cupStartX:int = 39;
var cupStartY:int = 266;
var cupEndX:int = 520;
var cupEndY:int = 175;
cup.buttonMode = true;
cup.addEventListener(MouseEvent.MOUSE_DOWN, startDragging);
cup.addEventListener(MouseEvent.MOUSE_UP, stopDragging);
var barStartX:int = 178;
var barStartY:int = 234;
var barEndX:int = 522;
var barEndY:int = 22;
bar.buttonMode = true;
bar.addEventListener(MouseEvent.MOUSE_DOWN, startDragging);
bar.addEventListener(MouseEvent.MOUSE_UP, stopDragging);
var orangeStartX:int = 284;
var orangeStartY:int = 102;
var orangeEndX:int = 522;
var orangeEndY:int = 22;
orange.buttonMode = true;
orange.addEventListener(MouseEvent.MOUSE_DOWN, startDragging);
orange.addEventListener(MouseEvent.MOUSE_UP, stopDragging);
var bottleStartX:int = 172;
var bottleStartY:int = 303;
var bottleEndX:int = 520;
var bottleEndY:int = 175;
bottle.buttonMode = true;
bottle.addEventListener(MouseEvent.MOUSE_DOWN, startDragging);
bottle.addEventListener(MouseEvent.MOUSE_UP, stopDragging);
var bananaStartX:int = 113;
var bananaStartY:int = 123;
var bananaEndX:int = 522;
var bananaEndY:int = 22;
banana.buttonMode = true;
banana.addEventListener(MouseEvent.MOUSE_DOWN, startDragging);
banana.addEventListener(MouseEvent.MOUSE_UP, stopDragging);
var napkinStartX:int = 248;
var napkinStartY:int = 271;
var napkinEndX:int = 520;
var napkinEndY:int = 175;
napkin.buttonMode = true;
napkin.addEventListener(MouseEvent.MOUSE_DOWN, startDragging);
napkin.addEventListener(MouseEvent.MOUSE_UP, stopDragging);
var yogurtStartX:int = 27;
var yogurtStartY:int = 136;
var yogurtEndX:int = 518;
var yogurtEndY:int = 329;
yogurt.buttonMode = true;
yogurt.addEventListener(MouseEvent.MOUSE_DOWN, startDragging);
yogurt.addEventListener(MouseEvent.MOUSE_UP, stopDragging);
var strawberryStartX:int = 120;
var strawberryStartY:int = 285;
var strawberryEndX:int = 522;
var strawberryEndY:int = 22;
strawberry.buttonMode = true;
strawberry.addEventListener(MouseEvent.MOUSE_DOWN, startDragging);
strawberry.addEventListener(MouseEvent.MOUSE_UP, stopDragging);
var sandwichStartX:int = 7;
var sandwichStartY:int = 364;
var sandwichEndX:int = 522;
var sandwichEndY:int = 22;
sandwich.buttonMode = true;
sandwich.addEventListener(MouseEvent.MOUSE_DOWN, startDragging);
sandwich.addEventListener(MouseEvent.MOUSE_UP, stopDragging);
var juiceStartX:int = 88;
var juiceStartY:int = 347;
var juiceEndX:int = 518;
var juiceEndY:int = 329;
juice.buttonMode = true;
juice.addEventListener(MouseEvent.MOUSE_DOWN, startDragging);
juice.addEventListener(MouseEvent.MOUSE_UP, stopDragging);
var foilStartX:int = 39;
var foilStartY:int = 416;
var foilEndX:int = 520;
var foilEndY:int = 175;
foil.buttonMode = true;
foil.addEventListener(MouseEvent.MOUSE_DOWN, startDragging);
foil.addEventListener(MouseEvent.MOUSE_UP, stopDragging);
var waxbagStartX:int = 235;
var waxbagStartY:int = 342;
var waxbagEndX:int = 522;
var waxbagEndY:int = 22;
waxbag.buttonMode = true;
waxbag.addEventListener(MouseEvent.MOUSE_DOWN, startDragging);
waxbag.addEventListener(MouseEvent.MOUSE_UP, stopDragging);
function startDragging (e:MouseEvent) {
e.currentTarget.startDrag();
function stopDragging (e:MouseEvent) {
e.currentTarget.stopDrag();
switch (e.currentTarget) {
case apple:
if (apple.x < appleEndX - offset || apple.x > appleEndX + offset || apple.y < appleEndY - offset || apple.y > appleEndY + offset) {
apple.x = appleStartX;
apple.y = appleStartY;
else {
apple.x = appleEndX;
apple.y = appleEndY;
//checkGame();
break;
case sandwich:
if (sandwich.x < sandwichEndX - offset || sandwich.x > sandwichEndX + offset || sandwich.y < sandwichEndY - offset || sandwich.y > sandwichEndY + offset) {
sandwich.x = sandwichStartX;
sandwich.y = sandwichStartY;
else {
sandwich.x = sandwichEndX;
sandwich.y = sandwichEndY;
//checkGame();
break;
case orange:
if (orange.x < orangeEndX - offset || orange.x > orangeEndX + offset || orange.y < orangeEndY - offset || orange.y > orangeEndY + offset) {
orange.x = orangeStartX;
orange.y = orangeStartY;
else {
orange.x = orangeEndX;
orange.y = orangeEndY;
//checkGame();
break;
case strawberry:
if (strawberry.x < strawberryEndX - offset || strawberry.x > strawberryEndX + offset || strawberry.y < strawberryEndY - offset || strawberry.y > strawberryEndY + offset) {
strawberry.x = strawberryStartX;
strawberry.y = strawberryStartY;
else {
strawberry.x = strawberryEndX;
strawberry.y = strawberryEndY;
//checkGame();
break;
case napkin:
if (napkin.x < napkinEndX - offset || napkin.x > napkinEndX + offset || napkin.y < napkinEndY - offset || napkin.y > napkinEndY + offset) {
napkin.x = napkinStartX;
napkin.y = napkinStartY;
else {
napkin.x = napkinEndX;
napkin.y = napkinEndY;
//checkGame();
break;
case bar:
if (bar.x < barEndX - offset || bar.x > barEndX + offset || bar.y < barEndY - offset || bar.y > barEndY + offset) {
bar.x = barStartX;
bar.y = barStartY;
else {
bar.x = barEndX;
bar.y = barEndY;
//checkGame();
break;
case juice:
if (juice.x < juiceEndX - offset || juice.x > juiceEndX + offset || juice.y < juiceEndY - offset || juice.y > juiceEndY + offset) {
juice.x = juiceStartX;
juice.y = juiceStartY;
else {
juice.x = juiceEndX;
juice.y = juiceEndY;
//checkGame();
break;
case foil:
if (foil.x < foilEndX - offset || foil.x > foilEndX + offset || foil.y < foilEndY - offset || foil.y > foilEndY + offset) {
foil.x = foilStartX;
foil.y = foilStartY;
else {
foil.x = foilEndX;
foil.y = foilEndY;
//checkGame();
break;
case banana:
if (banana.x < bananaEndX - offset || banana.x > bananaEndX + offset || banana.y < bananaEndY - offset || banana.y > bananaEndY + offset) {
banana.x = bananaStartX;
banana.y = bananaStartY;
else {
banana.x = bananaEndX;
banana.y = bananaEndY;
//checkGame();
break;
case bottle:
if (bottle.x < bottleEndX - offset || bottle.x > bottleEndX + offset || bottle.y < bottleEndY - offset || bottle.y > bottleEndY + offset) {
bottle.x = bottleStartX;
bottle.y = bottleStartY;
else {
bottle.x = bottleEndX;
bottle.y = bottleEndY;
//checkGame();
break;
case waxbag:
if (waxbag.x < waxbagEndX - offset || waxbag.x > waxbagEndX + offset || waxbag.y < waxbagEndY - offset || waxbag.y > waxbagEndY + offset) {
waxbag.x = waxbagStartX;
waxbag.y = waxbagStartY;
else {
waxbag.x = waxbagEndX;
waxbag.y = waxbagEndY;
//checkGame();
break;
case cup:
if (cup.x < cupEndX - offset || cup.x > cupEndX + offset || cup.y < cupEndY - offset || cup.y > cupEndY + offset) {
cup.x = cupStartX;
cup.y = cupStartY;
else {
cup.x = cupEndX;
cup.y = cupEndY;
//checkGame();
break;
case yogurt:
if (yogurt.x < yogurtEndX - offset || yogurt.x > yogurtEndX + offset || yogurt.y < yogurtEndY - offset || yogurt.y > yogurtEndY + offset) {
yogurt.x = yogurtStartX;
yogurt.y = yogurtStartY;
else {
waxbag.x = waxbagEndX;
waxbag.y = waxbagEndY;
//checkGame();

Some questions:
1. Can I specify more than one End x,y location for a draggable sprite?
yes, use an if-else statement
I'm creating a lesson to teach kindergartners how to sort lunchroom waste. If they have a napkin, for example, it could either go into the compost OR into the recycling. In cases like this where an item could really be placed into more than one bin, I want them to get it right if they do either of those things, rather than forcing them to choose which one.
2. To make my project more "fun" for kids, I wanted to customize the cursor with a graphic of hand. When I tried this in the flash file it works perfectly until I add the drag and drop functionality for the wasted items. Then the cursor will more around but not pick up any items. Once I revert back to the standard pointer, the correct drag and drop functionality is restored.
assign your cursor's mouseEnabled property to false:
yourcursor.mouseEnabled=false;
3. I have it set to snap back to the original location if learner attempts to drop the item on the wrong target. I want to be able to play a sound file when that happens, as well as play a sound file when it lands on the correct target, as well as shrink the item and change its opacity so that it appears invisible. I want to give the illusion of it being placed into the bin. I have no idea as to the proper way to code these events so that they happen.
use the sound class to create a sound:
// initialize your correct sound once with
var correctSound:Sound=new CorrectSound(); // add an mp3 sound to your library and assign it class = CorrectSound
// apply the play() method everytime you want your sound to play:
correctSound.play();
// change an object's opacity:
someobject.alpha = .3; // partially visible
someobject.alpha = 1; // fully visible
someobject.visible=false; // not visible, at all.
// change an object's scale
someobject.scaleX=someobject.scaleY=.5; // shink width and height by 2
someobject.scaleX=someobject.scaleY=1; // resize to original
4. I've watched dozens of hours of youtube tutorials before coming here. I'm a quick study, but am very new to action script. In one of the videos the developer showed referencing an external action script file which I don't think is an option in CC. The coding method he used seemed much more streamlined and "clean" than the chunks I'm working with now. Is there an easy way for me to code information about these objects than the way I've got it here now? I hate starting new things with bad habits. The perils of self-teaching.
you could google:
actionscript 3 class coding
actionscript 3 object oriented programming
p.s. you can simplify and streamline your coding by learning about arrays and using hitTestObject.

Can you use a wired ethernet to internet AND wireless to apple tv

Similar Messages

Maybe you are looking for