Can you use an application in hyper-v environment in Windows server from each client computer or that is not possible?

hi,
I like to know besides running 2 or more operating systems,like exchange or SQL ect .
what other benefits it has for example when you install 2-3 applications in t hyper_v environment can you use those applications from each client computer or that is not possible at all. ( I don't mean cloud )
thanks
johan
h.david

thanks,
so , now what is the benefit of hyper-v role on essential 2012r2 . it that means that I can install only one operating system on it only one instance and no more. also I can run some applications on this server just like you say with RDP licence
for each user to acces this virtual server!
and if I want more instances then I have to get datacenter.
johan
h.david

Similar Messages

Tried my k3772-z modem to connect macbook air to internet and got the message: you can't use this application with this version of mac os x. Is there a setting that needs to be changed?

Tried my k3772-z modem to connect macbook air to internet and got the message: you can't use this application with this version of mac os x. Is there a setting that needs to be changed?

I can't help you with a direct answer. For third-party devices you should contact the vendor (Vodafone).
If you have an iPhone (or an Android phone with hot-spot capability) you can use that to connect to the Internet without paying for a separate cellular service.

How to recognize if application is installed using "Install Application on Remote Desktop" option on Windows Server 2008 R2

How to recognize if application is installed using "Install application on remote desktop..." option in Control Panel in Windows Server 2008 R2?
Basically, as administrator, I can't say if the user installed application using "Install application on remote desktop..." in Control Panel or he just installed it by clicking the .msi executable. I can't find anything that makes any difference.
I could not find anything in the registry. I am quite confused.
Thanks,
Aleksandar9

Hi,
Thank you for your posting in Windows Server Forum.
Please make sure that you are using category view of control panel-programs to check the application. And in addition to “install application on Remote Desktop server” user can also use command line also.
change user /install
change user /execute
change user /query
“The first time you run the application, it searches the home directory for its .ini files. If the .ini files are not found in the home directory, but are found in the system directory, Terminal Services copies the .ini files to the home directory, ensuring
that each user has a unique copy of the application .ini files. Each user should have a unique copy of the .ini files for an application. This prevents instances where different users might have incompatible application configurations.” (Quoted formthis
article).
Hope it helps!
Thanks,
Dharmesh

Can you use a self signed certificate on an external Edge Server interface?

Hi,
I have a small lab deployment for evaluation purposes. The Lync FE server works great for internal users. I have now added an Edge server. For the internal interface, I have a self signed certificate from our internal CA. (no problem there) For the external
interface, I have a self signed certificate from our own external CA. I have installed the cert on the client machine of the external user and installed it for trusted operation. I have used the RUCT and digicert tools to prove that the external self signed
cert is valid (root and intermediate have been checked for validity).
At first, when logging in from the Lync 2013 client on the external users machine, I would get an error from Lync about the cert being untrusted. I have now fixed that error by adding it as trusted. At this point, there are no errors or warnings in the Event
Viewer (in the application or system logs) However, I receive the following error from the Lync client, "Were having trouble connecting to the server... blah, blah".
Here is my question. Does the Microsoft Lync 2013 client and/or the "testconnectivity.microsoft.com" tool specifically prevent or forbid the use of self signed certificates on the external interface of an Edge server? They seem too.
I can tell if the certificate is my problem or something else. Any ideas on how to trouble shoot this?
Thx

Drago,
Thanks for all your help. I got it working.
My problem with the Lync client error, "Were having trouble connecting to the server... blah, blah", was NOT a certificate error. It was a problem with my Lync Server Topology. (My sip default domain needed to match my user login domain.)
Let me update everyone about self-signed certificates:
YES, you can self-sign a certificate on your external edge server. It is a pain, but possible.
I have a self signed certificate from our own external CA. I have installed the cert on the client machine of the external user for trusted operation. I have used the RUCT and digicert tools to prove that the external self signed cert is valid (root and
intermediate have been checked for validity).
Here are my notes:
Create/enable your own external Certificate Authority (CA) running on a server with internet access.
On the Lync Edge Server, run the "Lync Server 2013 - Development Wizard".
Click "Install or Update Lync Server System". (Lync will automatically determine its deployment state)
You should have already completed: Step1 and Step 2.
Run or Run Again "Step 3: Request, Install or Assign Certificates".
Install the "Edge internal" certificate.
Click "Request" button to run the "Certificate Request" wizard.
You use can "Send the request immediately to an online certificate authority" option to connect to your internal CA, and create the certificate.
Once the certificate has been created, use "Import Certificate" to import it.
Once imported, on the Edge Server, go to: (Control Panel -> Administrative Tools -> Internet Information Services (ISS) Manager -> Server Certificates -> Complete Certificate Request...
In the Lync deployment wizard - Certificate Wizard, "Assign the newly imported "edge internal" certificate.
Install the "Edge External" certificate (public Internet).
Click the "Request" button to run the "Certificate Request" wizard.
Press "next"
Select "Prepare the request now, but send it later (offline certificate request).
Supply the "Certificate Request File" name and location. (You will need the file later. It should have the file extension ".req").
Click next on the "Specify Alternate Certificate Template". (which means you are using the default options)
Give it a Friendly Name. Bit Length = 2048. I selected "Mark the certificate's private key as exportable" option.
Fill in the organization info.
Fill in the Geographical Information.
The wizard should automatically fill-in the "Subject name:" and "subject alternative name:' fields.
Select your "Configured SIP domains"
"Configure Additional Subject Alternative Names" if you want. Otherwise, next.
Verify the "certificate Request Summary". Click next.
Run the wizard script to "Complete". The wizard will create a file containing the certificate request with the file extension ".req". (Let's assume the file name is "myCert.req")
Move your myCert.req file to your external CA. Have your CA issue the cert (based on myCert.req) and export the new cert to a file. I save it as a P7B certificate. (Let's call it "ExternalCert.p7b")
In the Lync Deployment wizard - Certificate Wizard, click on "Import Certificate" for ExternalCert.p7b.
Once imported, on the Edge Server, go to: (Control Panel -> Administrative Tools -> Internet Information Services (ISS) Manager -> Server Certificates -> Complete Certificate Request... (assign it a friendly name. Let's say "EXTERNAL-EDGE")
For the "External Edge certificate (public Internet), click "Assign".
The "Certificate Assignment" wizard will run.
Click next.
From the list, select your cert "EXTERNAL-EDGE".
Finish the wizard to "complete".
You are finished on the server.
Move the "ExternalCert.p7b" file to the machine running the lync client. Install the cert via the "Certificate Import Wizard".
When installing it to a particular Certificate Store, select the "Place all certificates in the following store" option.
Browse
Select "Trusted Root Certification Authorities"
Finish the wizard.

HT4818 Can you use both Bootcamp and Parallels with the same Windows 7 installed

I have Parallels installed with Windows 7. Can I use both Bootcamp and Parallels on the same machine depending on whether I just want to work in Windows all day (Bootcamp) or alternate during the same session (Parallels)?

You can, yes. But there is a complication: once you activate windows it will only be activated for one of the two methods you use. So, let's say you install into boot camp and activate windows. You can then install Parallels and it will find your boot camp installation, but when running in Parallels, Windows will report that it is not activated. Or, you can activate it in Parallels and when running in Boot Camp Windows will report that it is not activated. The reason for this is because Windows thinks it is running on different computers depending on how you boot it. This may not be an issue for you if you run Windows a lot one way and just occasionally the other way, so be sure to activate Windows in whichever method you use more often. Hope this helps!

Can you use ipad to back up photos and then remove them from iphone?

I have a 16gb iphone which is reaching its usage limits. I also have a 120gb ipad and want to use this to store my photos in order to free up space on my iphone. Is it possible to set this up?

Solomon.may wrote:
Thanks for the response.
I do not yet have IOS8 due to the lack of space on the phone.
Update via iTunes, it requires much less space than trying to do it over the air.
However, I presently have sufficient space on the icloud. If I delete a photo from my camera roll will it fee up space and allow me to retain them on photostream?
It will free up space, but not enough, hundreds will need to be deleted. Read my previous post.

Can I use my Intel-based MacBook to boot into Windows 7 from an external HDD?

Okay, so I need to use Windows for some simple applications. Problem is, I don't have a Windows desktop anymore and while I have both Windows and Linux partitions along with Mountain Lion on my installed hard drive, I'm probably going to wipe said drive and just use the entire partition for Mountain Lion. That said, I'd like to use an extra hard drive I have lying around to boot Windows.
My questions are:
1. Does my MacBook support USB boot to Windows?
2. If my laptop does support this, can someone point me to a set of good reliable instructions to install Windows onto the external hard drive and boot into it by USB?
Thank you; have a blessed day!

You seem to have a triple boot system that was done using the 10.6 installer disk and a copy of rEFIt.
I know because I had the same thing once.
I can tell you what will happen if you decide to upgrade 10.7 or 10.8
1: The EFI and GUID is going to change, rEFIt hasn't been updated in ages since 10.7 started rolling out back in about June 2011. There will be adverse effects with rEFIt so I hear.
2: The 10.8 upgrader is going to barf at your triple boot system, it will upgrade the 10.6 partition but warn you that the 10.8 RecoveryHD partition (10.7 and 10.8 both install) that it normally installs at the very bottom of the drive will not be installed and you can't enable Filevault.
Intel Mac's can have only 4 bootable partitions on the drive, the 10.7+ installer is normally dealing with EFI, MacintoshHD, BOOTCAMP, RecoveryHD. It barfs at anything else it doesn't understand and will not install RecoveryHD partition, which on a non-Internet Recovery capable hardware is required to reinstall the currently upgraded OS X operating system version. But you can always go back to the 10.6 disks and wipe and restore that way or via 10.6 USB boot key.
http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
So with 10.7+ you'll have to use something like Carbon Copy Cloner for the OS X partition.
So since rEFIt is going to be hosed, so will your ability to use the EFI based program to boot into the three operating systems at boot time.
I assume you found this out and why you want to dump Windows on a external drive. However Apple's EFI doesn't recognize Linux as a boot option.
There is a rEFIt fork that will allow Linux to boot on a Mac: http://www.rodsbooks.com/ubuntu-efi/index.html
Windows as you now know can't be booted off a external drive, however if your use of it is minor, you may want to consider using a virtual machine to run it in OS X or Linux instead using the free VirtualBox.
Windows in BootCamp or Virtual Machine?
You should Carbon Copy Cloner the OS X 10.6 partition to a external GUID OS X Extended J (JHFS+) drive.
You can use WinClone 3 in OS X to clone the Windows partition to a external drive, but it's a backup only, no booting capability. Restoring it will boot on the internal drive of course.
Linux you should already know how to clone it to a external drive using dd.
I advise you use the 10.6 install disks to set up your new partition scheme, but your going to have to uninstall rEFIt and return the machine and firmware back to basic Apple factory system as possible before doing anything.
EFI doesn't get erased, it resides in NVRAM and the EFI partition, controls the at boot key commands to boot off OS X install disks, so it's important to uninstall rEFIt completely before upgrading OS X.
If the Windows version your using is XP, to install that first using BootCamp in a fresh 10.6 install and reverse clone using WinClone before upgrading to 10.7 or above. It will be grandfathered in, but can't be reinstalled later.

Can you please assist me in increasing the speed of my server

hai friends,
i am using 4.7ee on windows Can you please assist me in increasing the speed of my server.....

nice hint, but not usefull.
how you are going to set virtual memory???
the maximum virtual address space of a process depends on the architecture (32/64 bit) and - if 32 bit Exectuable - on
- if running on 32 Bit Operating System /3GB and /userva boot.ini options
- if running on 64 Bit Operating System: max 4 GB
as long as your application is able to allocate enough memory your pagefiles are sized sufficiently. If you add physical memory, you normaly can decrease the pagefile size.
1 GB physical is much too less. Depending on the number of users on the server and depending on the SAP Release I would at least recommend to use 4 GB.
regards
Peter

How do you repair ntoskrnl.exe error or system error in windows server 2008 and 2012

hi,
can you repair system file errors like ntoskrnl.exe in windows server 2008 and 2012 like like before in windows server 2003 ?
the steps were repairing ntoskrnl.exe error in windows server 2003
1- have a 2003 cd and from that cd start recovery console and copy from i386 directory ntldr and ntdetect.com to windows /system32 directory on the server and then repairing
2- MBR with fixmbr command and then rebuild BOT.INI file with bootcfg/rebuild .
now my question is how you repair or solve such problem with ntoskrnl.exe error in windows server 2008 and windows server 2012
thanks
johan
h.david

first this wil take a lot of time for windows 2008 and 2012 ,
and what about windows 2003 I thing this has no startup repair
thanks
johan
h.david
What will take a lot of time? Repair or clean install? These days one can standup a new VM and have an operating system on it in around 20 minutes or so.
Correct server 2003 is file based deployment and completely different OS from repair perspective as well.
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Can you use BBB iplayer application with Apple Tv

Can you use BBC iplayer application on Apple TV. I live in Spain

The iPad/iPhone need to be on the same section of the network as the Apple TV. connect the Apple TV to the wireless router instead of the AT&T router. If you can, connect the other devices as well...

What application can you use to open a file with the .acc extension?

What application can you use to open a file with the .acc extension?

http://www.fileinfo.com/extension/acc

Can you use the same Apple ID on more than one MacBook Pro for updates and applications?

We just got a few new MacBook Pro's and when I went to install updates it said I need to make an Apple ID. Can you use the same Apple ID and email address for that Apple ID on multiple machines, or do I need them both to be unique per machine? I'm not sure how that works when you have multiple machines.

An Apple ID is a user name you use for everything you do with Apple. Creating an account for an Apple service, such as the iTunes Store or the App Store, creates an Apple ID. Apple ID allows you to access other Apple services. So you can use the same Apple ID for up to 10 Macs associated with it.
To create an Apple ID you need to enter your full name and your primary email address as your Apple ID. This will be used as the contact email address for your account.

Can i use other application on ipad such as microsoft excel or word? how?

can i use other application on ipad such as microsoft excel or word? how?

'Normal' PC and Mac (OS X) software do not work on the iPad (iOS), they are different operating systems. You can only install apps from the iTunes App Store on your computer or the App Store app directly on your iPad.
Numbers (http://itunes.apple.com/us/app/numbers/id361304891?mt=8) and Pages (http://itunes.apple.com/us/app/pages/id361309726?mt=8) are two options, as are third-party apps such as Documents To Go :
'normal' version : http://itunes.apple.com/us/app/documents-to-go-office-suite/id317117961?mt=8
premium version : http://itunes.apple.com/us/app/documents-to-go-premium-office/id317107309?mt=8

How can you use symbols in Windows 7 on a IMac 27

How can you use symbols @$€%£¥ in Windows 7 on a IMac 27 mid 2011? I tried what was normally done on Windows and got nothing. Alt plus numbers and nothing happens, what am I missing?

Frosted Flake,
Are you referring to an equivalent to the Windows Character Map Application (charmap.exe) that allowed you to see the various characters available in each font, and then give you an ALT-nnn number you could key to use the character you wanted ?
If so you can use the Special Characters from the Edit menu of most applications. Once you have located the character/symbol you want double click it and it will be entered wherever you cursor is located in your application.
Further information can be found here :
http://support.apple.com/kb/PH3871
Hope this helps
Cheers
AF

Can you use idvd on a new mac?

can you download a version of idvd to run on a new mac laptop running 10.9?
If not how can you successfully chapter (with a title page menu featuring still and animated ties in a selectable main menu) and burn a dvd?

If iDVD was not preinstalled on your Mac you'll have to obtain it by purchasing a copy of the iLife 09 disk from a 3rd party retailier like Amazon.com: ilife 09: Software or eBay.com. Why, because iDVD (and iWeb) was discontinued by Apple over a year ago.
Why iLife 09 instead of 11?
If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides themes from iDVD 5-7. The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them.
Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
This shows the iDVD contents in the iLife 09 disc via Pacifist:
You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
Export the slideshow out of iPhoto as a QT movie file via the Export button in the lower toolbar. Select Size = Medium or Large.
Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
Follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
YES, iDVD will run on Mavericks.
OT

Can you use an application in hyper-v environment in Windows server from each client computer or that is not possible?

Similar Messages

Maybe you are looking for