Can you use an mbox mini as an interface with Garage Band ipad? How?

I would like to use external d/a interfaces as an input to garage band on an ipad, but don't know how to connect them and set this up in Garage Band.
I have access to an mbox mini and a MOTU 828 mkii.  Any help on this?

Thanks for the response!  ...I may be trying it soon

Similar Messages

  • Is using the MBOX as an audio interface for garage band possible?

    I have an MBOX that I used with protools on my PC and it may be awhile before I finally get protools on my mac. Is it possible to use the MBOX with garageband?? and if so...are there any specs I should know about before using it?
    Message was edited by: jamos29

    Check on the digi site and/or forum for more info if you are using Snow Leopard.
    But you may be fine with a USB interface.

  • Can I use a MOTU 828mII interface with Garage Band

    I have a MOTU 828mII interface and I want to use it with Garage band. How do I set it up?

    You should be able to no problem . I might be speaking to fast .. Now you didn't say what your weapon of choice was. An iMac or what.  I use a MOTU 128. With an iMac.
    As I remember you install the software for you MOTU unit. Then go check for the newest driver and install it.
    Now for G.B... look in the preferences for GB ..  Look at the Audio/ Midi settings. There you can select the unit you want.
    Peace ...

  • Can I use a midi/usb cable to connect to garage band?

    Can I use a midi/usb cable to connect to garage band? Or do I need to buy an interface such as M-Audio. I have the M-TRACK, but haven't connected it yet.

    karbuckle10 wrote:
    Do I need two cables back and forth between the M-TRACK or just one OUT from the piano and IN from the M-TRACK?
    i must confess i haven't checked GBv10, but all previous versions (and i'm guessing GBv10 as well) have only supported MIDI-IN, so all you need is to run the keyboard's OUT to the interface's IN

  • My iPhone won't work without wifi and I can't receive or send iMessage unless I have wifi or 3G can't use Instagram, Twitter or anything to do with internet or messaging, how do i fix it?

    My iPhone won't work without wifi and I can't receive or send iMessage unless I have wifi or 3G can't use Instagram, Twitter or anything to do with internet or messaging, how do i fix it?

    For anyone else wondering how to fix this, all I did was turn my iPhone off and then turn it back on.

  • Can you use one PC for 2 different Ipods, with out erasing the others music from Itunes?

    Can you use one PC for different Ipod touch's , with out erasing the other persons Itunes music?

    Yes.  See:
    How to use multiple iPods, iPads, or iPhones with one computer

  • Can you use surround sound 5.1home theatre systems with iMac 27"?

    Can you use surround sound 5.1 home theatre systems with iMac 27"? I was thinking of using my iMac as an internet television as well as home pc. thanks

    NZane-
    Greetings and welcome to the Apple boards.
    The Mac puts out encoded 5.1. It is the function of the amplifier, receiver or decoder to take that signal and turn it into something useful. At minimum you will need a device that can accept that output and turn it into something useful.
    Most studios that I am familiar with want to be able to use their own 5.1 decoder, amp and speakers. Juicier sound!
    Luck-
    -DaddyPaycheck

  • Can you use a Mac Mini to share documents between several devices? iPhones, MacBooks, iPads, etc...? We are a home based business with several locations across the state and are having Google Drive issues, looking into Mac Mini options.

    We are having Google Drive issues (some files won't sync) and it's causing us trouble with our business communication. Is there any way to use a Mac Mini to share documents between two people in different areas similar to google drive? Would this just be done through iCloud?

    If you use Numbers, Pages and KeyNote it si very easy to sync those document among all the Apple devices. You need montain Lion on the Mac  and at least iOS 5 on the mobile devices.
    I show those document on my Mac, iPad 4 and iPhone 4S

  • Can I use 2 different iPhones (and iTunes libraries) with one ATV2?  How?

    My wife and I just bought an ATV2. We both have and use iPhone 3Gs's. I installed the remote app on both phones, but I am only able to control the ATV2 with the first phone I synced with ATV2. It doesn't seem that ATV2 cares what library it links to since the user has to turn on "Home Sharing" in their individual iTunes account. ATV2 appears to be set up so that you can choose what library you want to use (Under the settings). So can I use two different iPhones with one ATV2?

    You can home-share multiple libraries but only use one account at a time. So both phones would need to be signed in under the same apple ID.

  • How many track inputs can interface with garage band.

    Im going to buy and interface for recording multiple microphones. How many will garage band accept?

    Ben, do the letters RTFM ring any bells? There are hundreds of pages of tutorials at www.line6.com - check them first and then come back here if you
    are still stuck.

  • Can I record my MPC 1000 with garage band and how ?

    Hey,
    I got an MPC 1000 (akai) and I want to record it to Garage Band. I tried the same way with keyboard : New Track > Software instrument but no record but Garage band regonized there is a midi connected. I use a midi/usb cable between the mac and the mpc.
    Thanks for your help.

    That's ok. I check all updates and stuff.
    Thanks. Sorry for that.

  • Can you use a digital download of Windows 7 with Bootcamp?

    I want to install Windows 7 on my Mac (OSX 10.6.8), but I don't want to go out and buy a disc.
    Is it possible to use a digital download if I have the proper registration codes, etc?

    That's a pretty typical price (and actually about the lowest I've ever found) for a full install version. The upgrade disks can easily be found under $95, but won't install without access to a previous version. MS does not sell their OS cheap.
    You can find copies for somewhat less on ebay, but you have to be very selective. Many are full version copies, but were only meant to be sold with a computer bundle, so there's no guarantee they'll work on all systems. Also very many where the package has been opened. You don't want those. The serial number has already been used, or written down by the seller. Such ads will state things like the serial number has been de-authorized. Bull! You can't do that with Windows. The serial number is tagged to the computer it was installed on. There is no uninstall or any way to de-authorize or transfer the serial number.

  • Can you use a text field for email sender with E-mail button

    basically i would like to use input information from the user when someone sends an email instead of the default which is to look for a third party e-mail program like outlook. I want to bypass that and possibly use a text field that has the user input their email. some people don't use outlook so it would be nice to bypass that somehow. Is there a way to send email without the whole outlook thing, like not needing a "sender" and instead require them to input email address. I just want to receive the pdf. I am using LIVECYCLE by the way.

    You must enable POP forwarding for the account preferences via webmail access for the account.
    http://mail.google.com/support/bin/answer.py?answer=13273
    http://www.macosxhints.com/article.php?story=20041110192454841
    The instructions for enabling POP forwarding and creating the account as a POP account with an email client such as the Mail.app are available at Gmail's website.

  • Using your own AMS, how can you use BitmapData.draw() on an RTMP stream with no security exception?

    We have an Adobe AIR app written in AS3 that can view live video streams from other parties.  That being said, when trying to call BitmapData.draw() on one of those remote video streams (technically we're calling ImageSnapshot.captureImage()), we're getting a 2123 error - a security sandbox exception.  I've seen a lot of people refer to a real simple configuration in the AMS that will allow this to work for RTMP streams, but they keep posting broken links, links to posts that only vaguely mention this configuration, etc.  The one thing I did find is something that I'm having trouble applying:
    http://help.adobe.com/en_US/FlashMediaServer/3.5_SS_ASD/WS5b3ccc516d4fbf351e63e3d11a11afc9 5e-7ec3.html#WS5b3ccc516d4fbf351e63e3d11a11afc95e-7fcb
    Please don't just give me another link, unless it's to a quick, clear explanation.  How do you configure the AMS to allow people to capture screenshots from RTMP video streams?  For the above article, I've tried setting videoStreamAccess and audioStreamAccess both to "/", and even it didn't work.  We also need to be able to do this for P2P RTMFP streams, but that's really a different question.  Thanks.

    You will get a better luck if you post this question on media server forum:
    http://forums.adobe.com/community/adobe_media_server?view=discussions

  • Can you use a control reference for a graph with two channels of data?

    when i try to wire a 2-D array of data to the value property of a graph(strict control reference), it shows a conflict. The value data type only shows up as accepting a 1-D array input. I want to use control references to pass the chart data to my main vi. Will I have to change the waveform graph control reference into an array control reference to make this work?? This would require adding a while loop in the main vi to read the array data and update the graph data??

    > when i try to wire a 2-D array of data to the value property of a
    > graph(strict control reference), it shows a conflict. The value data
    > type only shows up as accepting a 1-D array input. I want to use
    > control references to pass the chart data to my main vi. Will I have
    > to change the waveform graph control reference into an array control
    > reference to make this work?? This would require adding a while loop
    > in the main vi to read the array data and update the graph data??
    I think the problem is that your waveform graph is set to take one type,
    a 1D array of doubles, and you are wiring a different type. While
    charts adapt to type when the data is wired to their terminal, they do
    not adapt to data wired to their value property. If you change the
    datatype of the graph from its terminal, then you should see the value
    property change type also and you are set.
    Greg McKaskle

Maybe you are looking for

  • How should I upload a LR Web Gallery to my dot mac account

    I want to create some galleries in my Iweb site using Light room. what should I fill in to the drop down box for the hosting site url. I ultimately want to call in the galleries from a Freeway 5 Pro generated site that will be the visitor interface.

  • How to transport infoset query to Production serveR?

    when i transport everything is transported to production server. when i run the transaction in production server it shows me the error saying . PROGRAM Does not exist .. how to resolve this.. can any one help me to transport my infoset query from ste

  • Mail password not recognized

    My iPad mail isn't recognizing my password so I can't send or receive mail i am on iOS 8.1...my server. Shaw said the error was with apple and to open my mail in Safari, which I can still do so I know I have the correct password.

  • Condition TAB in campaigns

    Hello guys, When I create a promotion condition in the tab Condition of the Marketing Planner (Campaigns), the program inmediately creates another empty row as I were going to introduce another condition. Is this a normal behaviour or is that an erro

  • HT201210 i need to restore my iPone 4 but my mac says it's not 'eligible'? what do i do?

    i need to restore my iPone 4 but my mac says it's not 'eligible'? what do i do?