Can you use footnotes AND endnotes in the same document?

I just found out today that I have to have both footnotes (for comments and annotations) and section endnotes (for citations), to follow the formatting guidelines for my thesis... do you know if it's possible to use both with Pages '09?  I've spent a long time formatting as it is and really don't want to transfer my document to Word or anything (since I'll lose some of my settings)...  I would appreciate any suggestions!  Thanks!

The style of footnote/endnote is part of the Document settings so it appears that only one applies per document.
You could switch between them and copy the endnotes as ordinary text into a document which has footnotes.
That would be the only workaround I can think of.
Peter

Similar Messages

  • Can you use VGA and DisplayPort at the same time.

    I have a T500 with the ATI graphics. I currently have it set up with only a VGA monitor. I am wanting to also get the DisplayPort to VGA adapter. Will I still be able to use both external monitors and my laptop monitor? If anyone has done this let me know. I have read that you can use VGA and DVI but neither of my monitors have DVI.

    Exceptions are used when there are some mistakes , or exceeds the supposed values, we can highligt that in different colours for enabling the validator to notice easily. In this we are giving conditions for considering the value as exceptions. suppose, if the values is out of the range -1 to +1 then exception.
    But conditions can be considered as the restrictions given in measure level also. So please elaborate what you meant by conditions

  • Can we use exceptions and conditions at the same time?

    can we use exceptions and conditions at the same time? Are there any dependencies between exceptions an conditions?

    Exceptions are used when there are some mistakes , or exceeds the supposed values, we can highligt that in different colours for enabling the validator to notice easily. In this we are giving conditions for considering the value as exceptions. suppose, if the values is out of the range -1 to +1 then exception.
    But conditions can be considered as the restrictions given in measure level also. So please elaborate what you meant by conditions

  • Prompted to upgrade iTunes on computer. Won't let me and get error message MSVVR80.dll not found. Attempted to reinstall, won't let me. Can you have iTunes and iCloud on the same computer?

    Prompted to upgrade iTunes on computer. Won't let me and get error message MSVVR80.dll not found. Attempted to reinstall, won't let me. Can you have iTunes and iCloud on the same computer?

    Try following the instructions of tt2 in https://discussions.apple.com/thread/5822086

  • Can you have pages and word on the same computer

    can you have pages and word on the same computer

    Sure, I do (my Office is 2008 but I keep it around for some things I get from work).

  • My SB Audigy 2 card can't use headset and musicamplifier at the same time

    Hi, i just bought a SB Audigy 2 [D400] and i have downloaded drivers and programs. I run Windows XP SP2.
    The soundcard works fine but it is very very annoying that i physically have to change the jack in the green=line out jack from headset to musicamplifier when i want to use my musicamplifier and change back the jack in the green=line out from musicamplifier to headset when i just want to use the headset/headphones .
    In the shop they told my that i can connect both amplifier and headset at the same time and then with creative software control whether there is sound in the headset or in the amplifier. But i can't simple get it work.
    I tried to use the green to the amplifier and the headset/speakers in the black (line out 2) and then with creative speaker settings softeware choose headphones but still the ampliefier receive the sound and no sound in the headphones. Why? In fact no matter what configuration i try the headphones doesn't work.
    But if i change the jacks so headset is in the green line out then only headset is working and the amplifier doesn't work no matter i put it in sort=line out 2 jack or orange=line out 3 jack.
    Can somebody here tell me if it is possible or not to connect both headset and external amplifier and control by software which to play? and how?
    please help, thx.
    Michael

    If you can have an ASIO compatible music playing system, then it might be possible to have system like you wish when using Creative Audigy 2 card. Since ASIO bypasses Windows Audio System, you can use both 'drivers' (ASIO - WDM/MME/DS) side by side.
    Say you want to play a game (using headset /w mic) and someone other like to listen music at the same time. With ASIO capable system you can output your music for example to "center L/R (stereo) channels" and same time output sounds from other source (using MME/DS/WDM drivers) to normal output channel (Front L/R). Only thing is, you need to set your speakersystem to 4 or 6 (depending which other channel you're using) (and for better 'balance' to adjust "angle" on THX console. You get the THX console by installing Audigy 2 Zs software).
    Try for example http://img332.imageshack.us/img332/463/djs9mo.jpg[/img] width="406" alt="Image Hosted by ImageShack.us" >
    Another option:
    Say you want to play music through external amplifier and play game online with your headset + microphone (eg. others but you listen the music, you play games)
    --> try free http://img332.imageshack.us/img332/4589/tbp7rz.jpg[/img] width="406" alt="Image Hosted by ImageShack.us" >
    If you use ASIO on BeatPort Player you can select L/R individually from the list(s). Same rules as described earlier.
    = You can play from 2 different sources simultaoneusly (ASIO + WDM/MME/DS) to two different outputs without disturbance. The other (WDM/MME/DS) source is set 'automatically' output to (Audigy) "green" port, and the other (ASIO) to "black" or "orange" port (as set).
    .jtpMessage Edited by jutapa on 09-5-2005 05:30 AM

  • Can WRT54G use WPA and WEP at the same time?

    I used to have a smc 802.11b wireless router and a dlink 802.11b wireless print server.
    In order to have WPA and a firewall, I replaced the wireless router with a linksys WRT54G.
    Then I realize the dlink print server, even though it has the "g" keyword in the model name, does not do WPA (DP-G321).
    Do I have to buy a 802.11g wireless print server? Or is there another solution?
    I don't supposed the linksys router can do both WPA and WEP at the same time?
    Connecting the print server to the router with a cable is not feasible. They are on different floors.

    both of your devices are has a wireless b technology settings, just set a wep encryption on your network rather than wpa because some wireless b devices don;t work with wpa. with regards to your query if wep and wpa can be used at the same time, the answer is no.

  • How to place footnotes and endnotes on the same page?

    I have a word document with nearly about 64 footnotes and 500 endnotes. Endnotes are basically references guiding to other sources which are quoted in the book.
    My client has asked me to place all endnotes (references) of each page at the bottom of the page itself along with footnotes, but they shouldn't merge with footnotes. The reason for that he related that it makes easier for the reader to check the reference of the quote immediately at the bottom of the page, instead of flipping over all the pages and going to the end of the book everytime.
    How to do this? Can anyone enlighten me?

    Endnote placeholders are usually customizable to wherever you want them to be.
    How to do this? Can anyone enlighten me?
    I'm not sure if you're asking this question from a aesthetic design perspective or from a functionality perspective.
    Either way, I guess this link should give you some clarity: http://carijansen.com/2010/11/13/footnotes-and-endnotes-with-indesign/
    Also, there is already a thread in this forum that should answer your question - http://forums.adobe.com/thread/681891
    You may also want to review these links for cross-referencing that cuts down lot of time which came out in CS4 by request:
    http://www.adobe.com/designcenter-archive/indesign/articles/lrvid4024_id.html
    http://www.adobepress.com/articles/article.asp?p=1332860&seqNum=5
    Message was edited by: Sudarshan Thiagarajan
    Reason: A couple of more links to detail cross-referencing feature

  • Can you use 2 apple tvs on the same network with different apple ids and how would your devices know which apple tv to stream to?

    Hi,
    I was looking into purchasing 2 apple tvs and was wondering if they can be setup with different apple ids. I need to have mine setup with my id and be able to hook my devices to it , but have the one in a bedroom hooked to a different apple id and have my friend's devices stream to that one and not mine.  Is this possible?

    Welcome to the Apple Community.
    In order that your Apple TV only streamed from your iTunes Library and your friends to your friends, you would both have to have different homesharing ID's.
    So far as devices go, any device on a network can stream over AirPlay to an Apple TV, to ensure each of you couldn't stream to the others device you can enable a password via the Apple TV which would then need entering when you used a device for AirPlay.
    Shouldn't be a problem to do what you want to do.

  • Can you use 2 bluetooth headphones at the same time with ipad?

    I'd like to purchase 2 bluetooth headsets for my elderly parents to use with their ipad for FaceTime. They both typically use FaceTime at the same time to talk to their grandkids, but have difficulty hearing just using the ipad speaker. Is it possible to utilize 2 bluetooth headsets at the same time with ipad. If not, what's the best alternative? (Wired headsets will not work as they also are often caring for another young grandchild at the time and can't be tethered)

    You can only pair to one BT headset at a time.
    As an alternative, have you considered a BT speaker  so you can increase the volume of the Facetime call?

  • Can you use two iPod's on the same computer?

    I currently have an iPod Video, and my mother wants to get a shuffle or nano. The problem is, we only have one computer that will let iTunes run. Is it possible to use two iPods on the same computer, or even with the same iTunes?

    See these articles about using more than one iPod on one computer, and with either one or more iTunes libraries.
    Multiple iPod installations.
    How to use multiple iPods with one computer.
    If you have the latest iTunes, an easy way to create a new library is to hold down the 'alt' key whilst opening iTunes (for Macs), or hold down the 'shift' key (for Windows).
    This will give you the option of either using the current iTunes library or creating a new one.
    There are various methods of transferring different songs to different iPods with a single iTunes library.
    One is to manage the songs manually.
    With this setting, you can drag and drop songs/playlists etc onto the iPod from iTunes, and also delete and/or edit songs which are currently on the iPod without affecting the iTunes library.
    If you wish to keep the convenience of automatic sync, then you could set the iPods to sync with "selected playlists". This setting can be found in the iPod summary screen under the 'music' tab. With this setting, different playlists can be transferred and later deleted from each iPod without affecting any playlists stored in iTunes or the playlists on the other iPods.
    Also, on the 'summary' main page you will see the option to "only sync checked items". With this setting selected, if you remove the check marks from any songs in iTunes, they will not be transferred to the iPod. You can restore the check mark if you want to put the songs back on the iPod at a later date.
    Be aware that when playing songs in iTunes, any songs that do not have a check mark against them will be skipped over and will not be played.

  • G510 Can´t use keyboard and mouse at the same time

    I got my y50-70 laptop four days ago for gaming and when i played portal for the first time i noticed I had a really hard time playing it. It wasn't until I was at Glados that I realized that it was because my laptop wouldn't recognize my finger movements while i was using the keys.
     Ive been researching this for the past day and can't find the solution, and I believe its because my settings seem to be different? Ive looked at multiple solutions and everything says to turn palm checking off, but I dont have that option? I can turn it down, just not off (it does nothing btw). I was wondering if anyone else has found the solution to this problem yet and came here.
    It would really help if you had pictures so I can figure out where to go in settings (a lot of the things Ive read has told me to go to a certain settings tab that I cant find??. Thank you so much btw!

    Update: I clicked around and somehow disabled elan. My problem is solved but I no longer have two finger scrolling (my favorite feature). If you're looking for a solution to this problem and dont care about zooming, scroling, ect, what I think I did to disable it was rolled my driver for my mouse back. To get there just search for device manager, click on the one that says something about mouse, and go to the driver tab.
    If you have another suggestion please suggest it!!! I can live without two finger scroll, but would like to have it :/

  • Can we use CS6 and CC at the same time on different machines?

    We have a Creative Cloud subscription and have software downloaded to an iMac and also to a PC. I understand that we can't use the applications on both machines at the same time, but could one of my colleagues use the CS6 versions at the same time on the PC?

    Hi Carol
    A subscription to Creative Cloud gives you access to the CC version and the CS6 version of the software.  From the original question, it seemed to me that they were asking if they can share the subscription between 2 colleagues if one used the CC version and the other used the CS6 version.  That is not permitted as the subscription is licensed to one user.
    If you have a Creative Cloud subscription and a perpetual license for CS6 then you can use them concurrently on 2 machines as they are separate licenses.
    Does this help clarify?
    Thanks
    Bev

  • Can't use iPhone and Mail at the same time

    When my iPhone is on I can't receive Apple Mail on my computer. I get an error message on the computer that says another client is using the mail (or something to that effect). If I turn off the iPhone the error message usually disappears on my computer allowing me to access mail. Is there something I can do so I can keep my iPhone on and also get Apple Mail at the same time?

    Never seeing this problem.
    Are you using a MobileMe IMAP account or another provider and account? Is problem when using the Apple Mail application in OS 10.4.11 on your listed G5?
    Ernie

  • Can you fade in and fade out the same layer in the same page state?

    I am simulating a lot of touch interactions, and have a hand object that moves over the simllated screen. I want to add small "taps" under the hands to show touch; I can see how its easy to fade IN an object (say a small circle) that represents the touch; but how do I fade OUT that same object?
    Any help appreciated!
    Rob

    Hey Rob,
    I think you can achieve the effect you're looking for by using 'on click' interactions in conjunction with action sequences.
    I just made a simple example, here are the steps:
    1) Select the component you'd like to react on 'tap'
    2) In the Interactions panel, click 'Add Interaction', and select 'play action sequence'
    3) The timelines panel should now be given focus, and display the new 'on click' action sequence
    4) Select the "circle" you'd like to make the fade in followed by fade out effect.  If their opacity is set to 0 at this point, use the layers panel to select them.
    5) With the circle selected, in the timelines panel click 'add action', located at the bottom.
    6) Select 'fade' from the options available.
    7) In the properties panel, define the fade properties (for fade in, obviously set 'from' to be 0, and 'to' to be 100)
    8) Repeat steps 5 through 7, but choose from=100 and to=0
    9) Arrange the fade in, and fade out events on the timeline to get the timing choreography right.
    10) If you haven't done so already, set the opacity of your circles to be 0.
    Does this work for you?
    Is this what you were looking for?
    Let me know if you need clarification on any of the steps.
    Thanks for posting, great question!
    Tara

Maybe you are looking for