Can you use Forefront protection 2010 on a Exchange 2013 sp1 on-premises server?
Is it possible?
What are the alternatives if we exclude Exchange online protection?
Does this mean if you migrate from exchange 2010 to exchange 2013 you have "thrown your money away" for purchising forefront solution? Are there any "upgrade" forefront less-cost solution from 2010 to alternative versions?
with best regards,
bostjanc
Hi,
The following KB lists the supported Exchange Server versions.
http://technet.microsoft.com/en-us/library/ff921059.aspx
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Similar Messages
-
Can you use the Airport Express A1264 as an AP and a DHCP server at the same time?
Can you use the Airport Express A1264 as an Access Point and a DHCP server at the same time?
I would like to use it as a DHCP server and AP at the same time in my LAN (no internet, just local machines through a few switches). I was lead to belive this could be the case from a few networking friends that haven't been friendly enough to help me out setting it up.I need it to act as a dLink/Cisco/Linksys/etc basic wifi router, in the fact that you can access it via wifi, and it will spit out DHCP addresses (192.168.1.xxx) to everything wired downstream of it.
I want to simultaniously provide a Wifi connection and a LAN connection at the same time
Thanks,
BRad -
Error in moving exchange 2010 mailboxes to Exchange 2013 SP1 during migration
Dear All,
We were running Exchange 2010 SP3 with MBX/HT/CAS role in single server. Now we are migrating our exchange 2010 to Exchange 2013 SP1. After configuring co-existence and during the mailbox move from Exchange 2010 to Exchange 2013 SP1, we are facing below
error. Please help to troubleshot. As per our search on net, people were suggesting that it can be due to not able to resolve NetBIOS name. We checked same and we are able to ping both servers by NetBIOS and FQDN names.
[PS] C:\Windows\system32>New-MoveRequest -Identity
'[email protected]' -TargetDatabase "CI-DB01"
MapiExceptionNetworkError: Unable to make connection to the server. (hr=0x80004005, ec=2423)
Diagnostic context:
Lid: 14744 dwParam: 0x0 Msg: EEInfo: Status: 1722
Lid: 9624 dwParam: 0x0 Msg: EEInfo: Detection location: 323
Lid: 13720 dwParam: 0x0 Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 0
Lid: 62184
Lid: 16280 dwParam: 0x0 Msg: EEInfo: ComputerName: n/a
Lid: 8600 dwParam: 0x0 Msg: EEInfo: ProcessID: 6004
Lid: 12696 dwParam: 0x0 Msg: EEInfo: Generation Time: 0414-08-21T09:10:43.8970000Z
Lid: 10648 dwParam: 0x0 Msg: EEInfo: Generating component: 18
Lid: 14744 dwParam: 0x0 Msg: EEInfo: Status: 1237
Lid: 9624 dwParam: 0x0 Msg: EEInfo: Detection location: 313
Lid: 13720 dwParam: 0x0 Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 0
Lid: 62184
Lid: 16280 dwParam: 0x0 Msg: EEInfo: ComputerName: n/a
Lid: 8600 dwParam: 0x0 Msg: EEInfo: ProcessID: 6004
Lid: 12696 dwParam: 0x0 Msg: EEInfo: Generation Time: 0414-08-21T09:10:43.8970000Z
Lid: 10648 dwParam: 0x0 Msg: EEInfo: Generating component: 18
Lid: 14744 dwParam: 0x0 Msg: EEInfo: Status: 10060
Lid: 9624 dwParam: 0x0 Msg: EEInfo: Detection location: 311
Lid: 13720 dwParam: 0x0 Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 3
Lid: 12952 dwParam: 0x0 Msg: EEInfo: prm[0]: Long val: 22964
Lid: 15000 dwParam: 0x0 Msg: EEInfo: prm[1]: Pointer val: 0x0
Lid: 15000 dwParam: 0x0 Msg: EEInfo: prm[2]: Pointer val: 0xFE01A8C000000000
Lid: 62184
Lid: 16280 dwParam: 0x0 Msg: EEInfo: ComputerName: n/a
Lid: 8600 dwParam: 0x0 Msg: EEInfo: ProcessID: 6004
Lid: 12696 dwParam: 0x0 Msg: EEInfo: Generation Time: 0414-08-21T09:10:43.8970000Z
Lid: 10648 dwParam: 0x0 Msg: EEInfo: Generating component: 18
Lid: 14744 dwParam: 0x0 Msg: EEInfo: Status: 10060
Lid: 9624 dwParam: 0x0 Msg: EEInfo: Detection location: 318
Lid: 13720 dwParam: 0x0 Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 0
Lid: 53361 StoreEc: 0x977
Lid: 51859
Lid: 33649 StoreEc: 0x977
Lid: 43315
Lid: 58225 StoreEc: 0x977
Lid: 39912 StoreEc: 0x977
Lid: 54129 StoreEc: 0x977
Lid: 50519
Lid: 59735 StoreEc: 0x977
Lid: 59199
Lid: 27356 StoreEc: 0x977
Lid: 65279
Lid: 52465 StoreEc: 0x977
Lid: 60065
Lid: 33777 StoreEc: 0x977
Lid: 59805
Lid: 52487 StoreEc: 0x977
Lid: 19778
Lid: 27970 StoreEc: 0x977
Lid: 17730
Lid: 25922 StoreEc: 0x977
+ CategoryInfo : NotSpecified: (:) [New-MoveRequest], RemoteTransientException
+ FullyQualifiedErrorId : [Server=Exch01,RequestId=f6886977-92f1-4148-991b-aa76b449aff5,TimeStamp=8/21/2014 9:1
0:43 AM] [FailureCategory=Cmdlet-RemoteTransientException] 7FCC37,Microsoft.Exchange.Management.RecipientTasks.New
MoveRequest
+ PSComputerName : Exch01.domain.local
Please help as we are stuck here!!
Thanks in advance!!Can yo ping server by name not by FQDN? e.g. ping server1.
Make sure firewall/antivirus not blocking communication. Disable antivirus and try
Thanks,
MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. -
What can you use to protect trackpad
I have a macbook pro and am trying to find a protective cover for the trackpad. I found a plastic cover for the keyboard at my Apple store but they did not have anything to protect the trackpad in case water spills on it (which unfortunately happened to me, hence my trip to the Apple store). I am looking for something I can put over the trackpad but still be able to use it.
Thank you"I am looking for something I can put over the trackpad but still be able to use it."
I doubt it. The least expensive and prudent thing you can do is keep liquids way from your Mac. -
Coexistence & Upgrade Exchange 2010 SP3 Unified Messaging to Exchange 2013 SP1 UM
Hello Experts,
We're doing Exchange 2010 SP3 to Exchange 2013 SP1 upgrade.
This upgrade also include Unified Messaging component which is currently working with Exchange 2010 SP3 and Lync 2013.
We have one dial plan and its SIP URI and Secured.
Looking for high level steps to plan coexistence and upgrade of Unified Messaging from Exchange 2010 SP3 to Exchange 2013 SP1 integrated with Lync 2013. I'll also appreciate tips on what kind of certificate and its Subject name(s).
Microsoft documentation is not very clear and I found it confusing for my scenario. Since I we don't want any downtime for UM users, looking for some help.
Thanks in advance for help.
-DKHello Hinte,
Thanks for the information. I have been to this article which explains fresh deployment but doesn't address coexistence and migration scenario.
I'm looking for high level steps only. Can anyone validate and suggest if I'm missing something!
1) Install new CAS+MBX Server
2) Move system mailbox as per MS documentation to Exchange 2013 MBX
3) On CAS+MBX Server Enabled internal CA trusted Cert for UM Services.Internal
CA certs contain only CAS+MBX server's FQDN only.UM services Startup Mode is set to "Dual".
4) Assigned existing SIP URI Based Exchange 2010 Dial plan to New Exchange 2013 Servers.
5) Run Exchucutil.ps1
in Exchange 2013 and OcsUMUtil in Lync 2013 (Again?)
Will this be enough or Do I need to create New Auto attendant or
Haunt Group etc?
Thanks for all the help! -
if the Microsoft Forefront Protection 2010 for Exchange Server can use for exchange server 2013?
thanks for your reply!
what's protection software can use for exchange server 2013?
Hi,
Most (if not all) of the bigger vendors has a product that supports Exchange 2013, so look them up.
Exchange 2013 has some Anti-Spam and Anti-Malware Protection functionality that you can read about here:
http://technet.microsoft.com/en-us/library/jj150481(v=exchg.150).aspx
Martina Miskovic -
Forefront Protection 2010 for SharePoint Expiring
We're still running "Forefront Protection 2010 for SharePoint" on SharePoint 2010. We're receiving notifications that the license will expire in 30 days. At this point I plan to just allow it to expire (we will be upgrading to SP 2013
soon). Does anyone know if there will be any impact on SharePoint once this expires. I would really like to hear from Microsoft unless anyone has direct experience with "Forefront Protection 2010 for SharePoint" expiring.
Thanks!Hi mikea730,
If you were licensed to use one of the products that are listed in the "Applies to" section on November 30, 2012, Microsoft will continue to support your subscription through December 31, 2015. If your subscription expires before December 31, 2015, and if
it cannot be renewed because the product is no longer available, you can extend your Expiration Date through December 31, 2015 so that you can have additional time to migrate to an alternative solution.
More information, please refer to the link below:
http://support.microsoft.com/kb/2793998/en-us
The worst scenario is that the Forefront Protection 2010 for SharePoint can not scan SharePoint document libraries, it cannot affect the function of SharePoint 2010.
In addition, we have a special forum for ForeFront Protection for SharePoint :
http://social.technet.microsoft.com/Forums/en-US/home?forum=FSSPNext , you can create a new thread in this forum, more experts will assist you.
I hope this helps.
Thanks,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support -
Discontinuing Forefront Protection 2010 for Exchange
Hi
Microsoft is discontinuing any further releases of Forefont Protection 2010 for Exchange Server:
http://blogs.technet.com/b/server-cloud/archive/2012/09/12/important-changes-to-forefront-product-roadmaps.aspx
We have a lot of customers with on-premises Exchange Servers, to which we sold Forefont Protection 2010 for Exchange Server.
What is the alternative for that product, Forefront Online Protection?
What is the Scenario, if a customer don't want his mx record to point to Microsoft?
Regards
PeterHi,
I'm sorry but yesterday I was working with a customer.
This is going to be a long post :-)
Exchange 2010 has no native antivirus/malware protection. This kind of protection is provided by Forefront Protection 2010 for Exchange.
Those filters provide antispam protection therefore from this point of view I wouldn't consider them a replacement for Groupshield AV protection on Exchange 2010.
This is the fast answer :-)
Let's move to the longer one.
There are going to be a lot of assumptions because I don't know your environment at all and this is something which should be carefully planned and tailored based on your business needs.
Assumptions:
You have an Exchange 2010 Organization
There are no Edge servers
You are following the common scenario with an AV for Exchange (Groupshield) running on Hub and Mailbox servers, Postini for Inbound/Outbound traffic protection from AV and SPAM (MX record pointing to Postini) and an AV for Filesystem running on the Exchange
servers
You are planning to move to Exchange 2013 in the future (let's say 6 months/1 year from now)
You are open to discuss a Microsoft-oriented solution without 3rd party software
We are not going to discuss licensing (we are lucky and someone else will decide for us :-))
We are not going to discuss the differences between Postini/Groupshield/Forefront/Exchange agents because I don't know them well enough to tell you something which would make sense and I'm still discussing if it was better the Commodore 64 or the Amiga
(obviously Commodore 64)
We are looking for a solution which should cover as many scenarios as possible
Short-term objective: Achieve antivirus/antispam protection on Exchange 2010 and get rid of Groupshield (and may be of Postini with it)
Long-term objective: Migrate to 2013 and leverage the antimalware and antispam agents included in the product
Act 1 - Short-term objective:
Inbound/outbound traffic:
The antispam agents can be installed on an Exchange 2010 Hub server but the place where they should be used is the Edge server.
Solution 1: Replace Postini with 2 Exchange 2010 Edge servers (MX record pointing to the Edge servers). Antivirus protection will be provided by Forefront Protection 2010 for Exchange (FPE) . Antispam protection by Exchange 2010 and FPE (which expands the antispam
capabilities of Exchange 2010)
Solution 2: Replace Postini with Forefront Online Protection for Exchange (FOPE)
Internal traffic:
Solution: FPE will replace Groupshield on the Hub servers. No antispam agents installed. FPE will be installed as a Transport Agent
Database Content (aka all that stuff that doesn't pass through transport):
Not all Exchange data are passing through the Hub transport (i.e. Drafts, Calendar, Contacts, Public Folders, etc...)
Solution 1: FPE will replace Groupshield on the Mailbox servers. FPE will leverage the Virus API (VSAPI) to access the content of the Store
Solution 2: The AV installed on your clients has an Outlook plug-in which scans the content of the store client-side
This should provide enough AV/antispam protection and you will have an homogeneous solution where all components are able to interact smoothly (Outlook Junk Mail, Antispam agents, safe senders, safe recipients, etc...) without much effort in terms of 3rd
party plug-ins, different administration consoles, different places where you have to check if the message has been blocked.
I know what is going to be the fate of Forefront but this is to meet our short-term/immediate objectives. From now on we will have until December 2015 to plan our migration to Exchange 2013.
The screen fades to black. Voice-over announces that you migrated to Exchange 2013 :-)
Act 2 - Long-term objective:
Inbound/Outbound traffic:
Solution 1: Leverage the AV and antispam agents on your published MBX/CAS servers
Solution 2: Use FOPE
Internal Traffic:
Solution: Leverage the AV agent on your MBX/CAS servers
Database content:
In Exchange 2013 the VSAPI is dead. Any AV for Exchange will have to use transport agents on Exchange 2013. The only possible exceptions is using Web Services for the On-demand scan of a limited number of mailboxes.
Solution: The AV installed on your clients has an Outlook plug-in which scans the content of the store client-side
The screen fades to black. Credits.
There are a few considerations related to these design changes which demonstrates that IMHO they are a good choice but they would be too long to discuss in this post and they would probably be OT. I'm thinking to write a blog when I'll have some time.
IMPORTANT: These are just my 2 pence. You should discuss this with someone which knows your infrastructure. The above solutions are at best incomplete because there a lot more factors which come into play when choosing a design like this.
My personal advice is to involve your TAM (if you have one) and work with my colleagues to find the solution best suited for your company.
Bye
Gabriele
P.S. Pure self-advertising: If you are in Switzerland you are not far from me :-D
-- Gabriele Tansini [MSFT] This posting is provided "AS IS" with no warranties, and confers no rights" -
Spam notification on Microsoft Forefront Protection 2010 for Exchange Server
Hello
I'm using Microsoft Forefront Protection 2010 for Exchange Server on edge Exchange2010 SP2.
I did know I can't configure any notification for detected spam, because the result would be that the users inbox would be spammed with Forefront notifications instead of the real spam.
http://social.technet.microsoft.com/Forums/forefront/en-US/6c293ded-8e61-44a1-ac25-bb685ecd1c7c/notification-spam-forefront-for-exchange-2010
But I can't find the Forefront notifications in tracking logs.
Is it usual ?
if not, why the Forefront notifications was't send?
Thanks for any ideas.
HirokoHi,
I checked smtp log of our Exchange server.
But I think I can't search the logs.
Could you please tell me the word of error on smtp
log.
Thanks for any ideas.
Hiroko -
Running forefront protection 2010 for exchange. The version of Exchange we are running is Exchange Server 2007 sp3 rollup 13. I am seeing that half our engines are not updating for forefront. Currently we are running version 10.1.0746 sp1 for Forefront.
I would like to get this up to the newest version which I think is SP2. Where can I download just the service pack 2 and will I have any problem with the version of exchange I am running. Thanks in advance for any help.
JohnHi,
I guess you are talking about Microsoft Forefront Security for Exchange Server.
You could have a look on the following blog.
http://blogs.technet.com/b/fss/archive/2009/12/10/migrating-from-forefront-security-for-exchange-server-to-forefront-protection-2010-for-exchange-server.aspx
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Forefront protection 2010 for Exchange server - License Expiry.
Hi All,
We have forefront protection 2010 for exchnage server installed on my exchange 2010 servers. I see the expiry date set on the forefront console is 31st Mar 2014.
as per the below KB article's:
http://support.microsoft.com/kb/2793998?wa=wsignin1.0
http://technet.microsoft.com/en-us/library/ee358857.aspx
the support to the product is available till 31st Dec 2015.
My question is: how to extend the license for the forefront on all my exchnage servers? Should i have to change my license agreement number in the console or should i retain the same and just
extend the dates till 31st Dec 2015.
Also, how can we ensure that the change is effective and no issues after 31st Mar 2014.
Please help.
Thanks -
Sujit
Thanks and Regards - SujitHi,
the problem here is that you can't buy FPE anymore so you can't extend the license.
It will work if you change the license number and the date, but that means that you run FPE without a valid license! You should contact your local Microsoft branch to make sure you are safe with this.
Greetings
Christian
Christian Groebner MVP Forefront -
Replacement for Forefront Protection 2010 for exchange server.
Hello Team,
I have Forefront Protection 2010 installed on my Exchnage 2010 servers and the same is getting expired in March 1st week 2014. I also got to know Microsoft will stop support for the same very soon so i am really worried to get this license renewed or not?
Or please suggest any other product for same which can easily be replaced and has same or more features than Forefront also can easily be integrated with Exchange.
Thanks for taking your time and going through my querry and your valuable feedback will be really appreciated.
Thanks in Advance -
Sujitraj
Thanks and Regards - SujitHi,
Actually, FOPE or EOP may be your better selection.
http://technet.microsoft.com/en-us/library/jj723137(v=exchg.150).aspx
http://technet.microsoft.com/en-us/library/jj723146(v=exchg.150).aspx
http://technet.microsoft.com/en-us/library/ff715245.aspx
Best Regards
Quan Gu -
Can you use your imac as a monitor for you mac book pro laptop?
Can you use your imac as a monitor for you mac book pro laptop?
I have two computer one being a new mac book pro and the other being a slightly older imac desktop. I am wanting to know if you can use the desktop as a screen for my mac book pro. I just to mirror the laptop onto the desktop because it is more powerful, instead of getting another display for my laptop.
Is this possible and what connections do I need?
ThanksHello, we need more info on the iMac, not positive but I think it requires a 2010 or newer iMac & a Mini Display Port cable.
So we know more about it...
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
Hardware Overview:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 6 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.21f4 -
Can you use the same Apple ID on more than one MacBook Pro for updates and applications?
We just got a few new MacBook Pro's and when I went to install updates it said I need to make an Apple ID. Can you use the same Apple ID and email address for that Apple ID on multiple machines, or do I need them both to be unique per machine? I'm not sure how that works when you have multiple machines.
An Apple ID is a user name you use for everything you do with Apple. Creating an account for an Apple service, such as the iTunes Store or the App Store, creates an Apple ID. Apple ID allows you to access other Apple services. So you can use the same Apple ID for up to 10 Macs associated with it.
To create an Apple ID you need to enter your full name and your primary email address as your Apple ID. This will be used as the contact email address for your account. -
How many Ipods can you use with one Itunes account?
How many iPods can you use/sync with one iTunes account?
PT wrote:
Macistotle wrote:
Unless you have DRM still haunting your tunes ... Then you can only use those songs on 5 devices. Otherwise, connect as many as you like (as stated above).
No, you can sync your DRM tracks to an unlimited number of iPods (but only authorized to play on 5 different computers/user accounts)
Patrick
So I can sync two iPods to my iTunes account and sync the same digital copy movies that come with some o' my DVDs to both ipods? Do movies make a difference really, DRM-Wise? Thanks in advance.
Maybe you are looking for
-
BAPI_CUSTOMERQUOTATION_CHANGE
Good afternoon: I am using BAPI_CUSTOMERQUOTATION_CHANGE for changing my conditions value, i am filling the tables CONDITIONS_IN and CONDITIONS_INX and in the CONDITIONS_IN table I am filling the COND_UPDAT = 'U' and in CONDITIONS_INX -UPDATEFLAG =
-
Urgent:Error while deploying the BPEL process
Hi, I am doing a BPEL process to insert some data into employees table depending upon the employee Number. Means before inserting data, a check should be made whether that employee number already exists or not.If it exists then we have to update the
-
Why, When i download something on my MBA 2013 it doesn't work?
A few days ago i purchased a MBA mid 2013. When i downloaded Adobe Flash Player it didnt work the first time. When I went into the downloads section the downloaded part was faded and i could not open it. I deleted it and downloaded it again and that
-
You can try responding here if you want.
-
When I export photos to IPhoto slideshow they crop more and more after each play. Is this common?