Can you use the same charging cable for both an iPhone and an IPad or are they different?  When I use the charging cable for my iPhone on my Ipad, it doesn't charge.

Can you use the same charging cable for both an iPhone and an IPad or are they different?  When I use the charging cable for my iPhone on my Ipad, it doesn't charge.

The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
 Cheers, Tom

Similar Messages

  • Can I sync the same iTunes library on both my iMac and my MacBook Pro?

    Can I sync the same iTunes library on both my iMac and my MacBook Pro?  I've been connecting my iPhone to each and it's causing problems for me with them being different, despite my purchases always being under the same Apple ID.

    The easy way to do this is to keep the library on an external drive which you can plug into either computer.  Of course this isn't always the desirable solution.  You can try routinely copying the library from computer to computer though this gets tiresome. 
    Of possible relevance:
    Using iPhone, iPad, or iPod with multiple computers - http://support.apple.com/kb/HT1202 - You can manage your iPhone, iPad, or iPod with multiple computers as long as you have set the device to "Manually manage music."  -  e.g. adding music from a second computer to an i-device.

  • How to display the same data simultaneously on both a graph and a table.

    I am a beginner.
    I would like to display a reference line(?) on dvt:graph
    whenever a row is selected on the related af:table.
    I would like to show the same data,
    simultaneously on both a graph and a table.
    Is it possible?
    I hope for a good hint. ^-^...

    Hi,
    yes. It depends on how the reference line is getting its data. If e.g you can use EL to bind it to ADF bindings then attribute bindings for attributes of the iterator that also renders the table are enough to get the current selection.
    If this is not possible you can follow http://thepeninsulasedge.com/frank_nimphius/2007/07/02/adf-faces-rc-programmatically-executing-a-button-method-using-javascript/ and create a selection listener for the table to programmatically manipulate the graph
    Frank

  • Can you set up 2 apple tv's to 1 mac and 1 itunes account to play different movies to 2 tv's?

    Can you set up 2 apple tv's to 1 mac and 1 itunes account to play different movies to 2 tv's?

    sure the appletvs just access the shared iTunes lib on the computer thats all
    it been a thing for ages before Apple TV came out where computers on the same network could also access each others shared iTunes lib
    Apple TV does the same thing only problem could be if the network is not fast enough to transfer 2 streams of data at once

  • [svn:fx-4.x] 14806: Fix the same mirroring bug in both mx: WindowedApplication and s:WindowedApplication.

    Revision: 14806
    Revision: 14806
    Author:   [email protected]
    Date:     2010-03-17 06:50:37 -0700 (Wed, 17 Mar 2010)
    Log Message:
    Fix the same mirroring bug in both mx:WindowedApplication and s:WindowedApplication.  When using air,  setActualSize is called before commitProperties/invalidateLayoutDirection so invalidateLayoutDirection needs preserve the width as well as mirror in _layoutFeatures.
    QE notes:
    Doc notes: None
    Bugs: SDK-25735, SDK-25880
    Reviewed By: Jason, Kevin
    Tests run: checkintests
    Is noteworthy for integration: No
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-25735
        http://bugs.adobe.com/jira/browse/SDK-25880
    Modified Paths:
        flex/sdk/branches/4.x/frameworks/projects/airframework/src/mx/core/WindowedApplication.as
        flex/sdk/branches/4.x/frameworks/projects/airspark/src/spark/components/WindowedApplicati on.as
        flex/sdk/branches/4.x/frameworks/projects/framework/src/mx/core/UIComponent.as

  • I have lost my iphone and now i cannot locate it even when i use the find my ipphone app

    i have lost my iphone and now i cannot locate it even when i use the find my ipphone app

    It may be off, out of battery power or no internet connection. The lower section of the following link has some other things you may want to do (change passwords, report to law enforcement and to your cellular carrier: If your iPhone, iPad, or iPod touch is lost or stolen - Apple Support

  • How much stuff can you load into a project before it starts crashing? And is there a way to tell if this is the problem that's causing the crashing?

    I'd like to know if there's a way to tell if I've loaded too much media into my premiere pro project?
    I'm getting some interesting crashing issues and suspect it's because I've loaded a bunch of stuff into the project. I guess I could go through and start deleting stuff, but I'd like to know if there's a way to tell if that's the problem first.
    I'm running cs6 latest 6.0.5. Macbook Pro i7, 16gb ram, 2tb external Gdrive storing media. I have cuda enabled.
    Thanks a lot for any help!
    Garett

    I copied text & paisted it and then draged the 3 photos from the file...then clicked on the photo then clicked the inline boxon tool bar nexed to floating one and that is how I did it
    I do not know what you mean "cut & paist"  how do I get the photo in from my picter folder if I do not drag it to the page in Pages? 
    I went to my photo folder and copied a photo and paisted the photo on the top left part of the page and it went there but there was no text to the right of photo...I could crop the photo to what ever size but no text to the right of photo...
    This is just too big of a mess of a program as it should be easier then this,,,I hav e 300 photos in this project and would have to re-paist them all...that is nuts...
    I see the button to the right of inline and floating that has 6 [lace to have the photo but the text does not float around the photo...
    If this is what your talking about this very little freedom in my page layout as I need it to let me place it where I need it to be and the wrap the text...
    There has to be an easier way to get my books ready for other formats other that Apple's iPad...iBooks Author was way eisier to make ready for iTunes...Love that program!!!
    Want my books for sale on all the other formats and was told by Apple Pages whould do it...
    I must be be out to lunch or the designers at Apple are ???

  • Hi Can you tell me any datasource whcih has both action type and wagetype.

    Hi
             Can you tell me any datasource or cube or multiprovider whcih has both action type and wagetype.
    Edited by: manukonda anil kumar on Oct 11, 2010 1:45 PM

    hi Manu,
    I think this question has been answered check the below thread.
    Datasource in HR which has both payroll and wagetype.
    Regards
    Kp

  • In app store it does not show for update it always show that all apps are updated but when i search the app it asks me to update the app ????? someone plzz help me.

    someone plzz help me i m so confused!!!

    Try resetting the phone. Push both the home and lock button at the same time until it goes off. Keep them pushed until the Apple logo come up...
    Also, try deleting the app and downloading it again.

  • My Bose SIE2i volume control does not work. (pause/play does work). This is the secone set - the apple store in Sydney replaced the firsat set that had the same problem. It was working OK and has stopped.

    My Bose SIE2i volume control does not work. (pause/play does work). This is the second set - the apple store in Sydney replaced the first set that had the same problem. It was working OK and has stopped.

    Thanks again V.K. I did check the layout, and it was listed as alphabet when I inputted the password. So that doesn't seems to the the issue.
    Just finished a truly mystifying experiment, but I put in a shorter password in the way mentioned earlier and it worked. I then systematically kept increasing the characters of that password and it seems that if the password starts to exceed about 16, it stops recognizing it. I am fairly sure it is not the password itself since it never gives an error when typing in the verification password. So unless I systematically make the exact mistake twice at the setup screen, and then don't or make a different mistake every time at the login screen, I don't think its my typing skill.
    So problem solved for now, but I am still a bit worried. Maybe I should completely reinstall and use a shorter password.
    Is there supposed to be a length limit?

  • Email Notifications for both UWL Tasks and Collaboration Tasks.

    Hello,
    I want to configure Email Notifications for both UWL Tasks and Collaboration Tasks.
    Could any one please give me the configuration steps.
    Thanks in Advance.
    Regards,
    Sridhar.

    Hi sri,
    Refer the following threads
    https://www.sdn.sap.com/irj/scn/thread?threadID=147316
    https://www.sdn.sap.com/irj/scn/thread?messageID=315715#315715
    https://www.sdn.sap.com/irj/scn/thread?messageID=1170132#1170132
    Regards,
    P.Manivannan

  • When using the same Firefox profile in Ubuntu 12.04 and Windows 8.1, how can I keep autoscrolling enabled in Firefox for Linux?

    I access the same Firefox profile in Ubuntu 12.04 and Windows 8.1 (Windows fast startup disabled). I have the newest version of Firefox (26.0) on each system.
    Every time I launch Firefox in Ubuntu after using the profile in Windows, I notice that autoscrolling is disabled. So I have to manually enable it every time after using my profile in Windows.
    Conversely, every time I launch Firefox in Windows after using the profile in Ubuntu, I'm asked whether I would like to set Firefox as my default browser. I choose "No", first making sure that there is no check mark next to "Always perform this check when starting Firefox". I have to do this every time after using my profile in Ubuntu, despite the fact that if I check my preferences in either OS, "Always check to see if Firefox is the default browser on startup" is not enabled. Note that Firefox is my default browser in Ubuntu but not in Windows, but I have no need for Firefox to check whether it's the default every time it starts in either OS.
    I don't know whether these problems are related, but it seems likely that they are. Is there a way that I can keep these settings constant, so they don't reset every time I switch operating systems?

    I'm sure that when I close the browser in either OS before switching to the other, the following two conditions are true in the Advanced tab of the Firefox Preferences menu:
    1) "Use autoscrolling" is enabled (with a check mark)
    2) "Always check to see if Firefox is the default browser on startup" is disabled (no check mark)
    The autoscrolling feature allows you to scroll by holding down the middle mouse button and moving the mouse up and down. The extension you linked to, ScrollyFox, enables scrolling by clicking a button in the Firefox UI, which is quite a different feature. So unfortunately the problems still remain.

  • Can the same I/Os be used for both scan mode and fpga mode

    Hey guys,
    I currently have this project where I want to have the same I/O in both the RT VI and FPGA VI.
    (as in use a C series module on the RT VI and FPGA VI concurrently).
    For the customer's sake, I want to keep using the scan mode for the ease of programming,
    but I want to use the I/Os in the FPGA VI to implement a safe state.
    Is this possible? Thanks.

    Either scan mode or FPGA interface. You can't use both in one project.
    Suggestion
    Setup a safe mode project or double the target in one project.

  • Can you give me a paper or document related to this phone was changed since it was broken down? I need IMEI numbers of two Iphones on the same page. Because I don't wanna save this Iphone again in my country. I paid one time for my old Iphone.

    My Iphone was changed because of broken down thanks to its warranty. I am from Turkey and I paid one time for my old Iphone to save. Can you give me a paper or document related to this phone was changed since it was broken down? I need IMEI numbers of two Iphones on the same page. Because I don't wanna save this Iphone again in my country. I paid one time for my old Iphone. If you give me a document, I don't need to save my Iphone5 and also I don't need to pay again to save in my country.

    this forum is made up of users like you, not apple employees.  We can not help you with that kind of request.

  • How do I use the same Itunes for both my IPOD and IPAD?

    How do i use itunes for both my ipod and ipad? and have everything on both of them.

    You can connect one of them to your computer's iTunes, select it on the left-hand side of iTunes, and then on the right-hand side select the Music tab and choose what to sync to that device - you can then connect, select and sync the same content to your other device.

Maybe you are looking for

  • KMODE_EXCEPTION_NOT_HANDLED in Windows 8.1

    I recently downloaded an official copy of Windows 8.1 from my school's official Dreamspark partnership. After installing Windows 8.1 and following the steps fully I had no issues for about half a day, however after I put my MacBook Pro to sleep I cou

  • AP 1141 SSIDL not showing other ssids

    I have configured our Ap 1141 with two ssid. One is the guest ssid and the other is marked to advertise in the SSIDl IE.  I can only see the guest-mode ssid in the broadcast.  I can connect to both if I manually configure the client to connect to the

  • How can I Create return order with reference to an ARCHIVED invoice

    The standard "Reference" process does not work when the invoice has been archived. Has anyone solved this problem?

  • Change the validity date in change number

    hi team, I want to change the validity date of a change number from 01.01.09 to 01.03.09. I am getting an error "A BOM has already been changed using a change number with the same valid-from date as the selected date 03.01.2009".  I can change the da

  • Trying to install Exchange Server 2013 and receive this error.

    Hello, I have a computer running Windows Server 2012 R2 Standard. I have completed all the prerequisites to install Exchange Server 2013. It all was going good until the install started. Then I received the below error. Does anyone have any suggestio