Cancel M/t Doc with Quality Stock

Dear All,
        I am facing the problem in cancellation of material document with Quality Stock.
I am explaining my scenario, when GR is posted the stock directly comes to Quality stock because, QM is activated.After that QM users release the quality plan in QA32.Then, u know it comes to Un-restriced stock.After that inventory person trying to cancel this material document in MIGO(cancellation) transaction, but the system not allowing to post.So, what we are doing, cancel in MB01 transaction with respect to PO itself in that case, we are manually removing the "X'indicator for quality stock when we posting.
But, in purchase order history, its showing the 102 Mvt.type.But, its not showing in J1iex(Posted-101) document flow (cancel-102) not showing for item wise Excise data.Part-1 entries not all cancelling with respect to excise.
I also check the scenario of GR - Quality Stock & Cancel(MIGO) - Quality stock. the J1iex document flow correctly updating..
But, the GR - Quality Stock, Cancel(MB01) - Un-restricted Stock, J1iex document flow not all updating..
Please resolve my issue experts!!!
From sas..

Hello,
It is std SAp functionality in CIN.
The part1 entries will get cancelled only if the material document is cancelled through transaction MIGO - Cancellation.
It won't get updated if you are using MBST or MB01/MIGO with 102 movement type.
Once QC has released the stock, it is not possible to cancel the material document through MIGO-Cancellation.
But for that, what you can do is that cancel the Usage decision  (UD) done through QA32. Check the below SAP Notes for UD reversal logic.
33924  - Reversing usage decisions
175842 - Inspection lot: Reversal of goods movements from UD
Regards
Gregory Mathews

Similar Messages

  • Cancel billing doc with Accounting doc clearing

    Dear gurus ,
    the scenario is that  we have a billing doc with wrong pricing and the relative accounting doc has cleared status,then we use VF11 to cancel the billing doc , the system give the information  "Document #### saved (no automatic clearing)" .Message no VF216 .
    My question is,  based on the new cancellation function module AC_DOCUMENT_REVERSE, as note 1259505 description (The most evident effect of the new cancellation procedure is the automatic clearing of the accounting documents.), is that legal or illegal ,the system cancel the billing doc without checking the status of the related accounting doc ?
    IF that is the standard reaction ,how can I make some change or config to make sure that ,the billing doc with cleared  accounting doc can't not be cancelled without reseting the status of accounting doc to "not cleared"?
    Thanks in advance ,
    Ryan
    Edited by: deyi chen on Jun 8, 2011 5:03 AM

    Hi,
    In my scenario system still cancel the invoice which is cleared but should not any accounting impact of canceled invoice
    Even if you try to release manually by VF02 the massage will appear
    Automatic clearing of billing document 12345
    and canc. doc. 17777 not poss.
    If don't want to allow creation of cancel invoice if origin invoice is cleared then do some enhancement.
    Kapil

  • How to revert stock in quality stock after qty issued with movemt type 704

    Hi Experts,
    User issued qty from quality stock to cost centre trough T-Code MI10. Inspection lot against the issue qty has status u201CREL CALC SPCO PRII CROK QLCHu201D This lot has been generated through mov  101 against PO (GR). After doing GR qty posted in quality stock. By mistake user has issued qty from quality stock to cost centre trough T-Code MI10. For same movement type was 704.
    Now they want same qty back in quality stock also they want to do UD for the same. How to get back this stock in quality stock?
    Awaiting for your expert reply.
    Thanks and Regards,
    Sandy

    hi Sandy,
    Quickest and easiest option without lot of configuration and process change for your scneario will be ,
    The transaction code is MB0A.
    The steps for executing the above trancode is as follows.
    Inputs:-
    Posting date : UD date.
    Movement type : 102
    Enter relevant plant, storage location, vendor and the material code
    The purchase order/sch.agreement for the given vendor-matl-plant combination will be displayed.
    Select the correct PO and click adopt selected.
    The material with quantities to be reversed will appear in various line items. Select the correct quantity for which the reversal to be made.
    Click adopt + details
    Enter storage location
    Remove "X" in the stocktype field
    Save.
    Material document will be generated.
    The correct material could be inwarded again and correct usage decision can be taken  against this lot.  
    Get approval from Materials and  Finance guys.   As long as your accounting documents nurlifies each other  ,  you should be good to go.
    If not  you have to use the same proess   witht twiests , with other movement types for which you have activated  inspection type.
    Hope this helps
    Cheers
    Rav

  • Mass Transfer Posting From Quality Stock to Return Stock with FI Effect

    Dear Gurus,
    1 Is there any way To do Transfer Posting At a stretch 1500 material list from Quality Stock to Returns Stock within a plant ?...
    2 Effect of Financial Entries eg Cost ?..
    Thanks & Regards
    Darvesh

    Hi Shoib,
    Is there any way To do Transfer Posting At a stretch 1500 material list from Quality Stock to Returns Stock within a plant ?...
    2 Effect of Financial Entries eg Cost ?..
    Sol:  1  ans is No. You Can not  transfer a 1500 material  from quality to unrestricted stock, Cause  the  Transfer of material is based on Either  PO or material doument
         If you  still want to do it  Chek with your ABAper to  develop a BDC  wich can transfer the material and or each PO  it should crreate a Accounting Document

  • Pls tell me the exact formula for calculation of Safty Stock with quality example

    Pls tell me the exact formula for calculation of Safty Stock with quality example

    Hi Devendra,
    safety stock is a quantity of stock which should be planned to be in inventory to protect against fluctuations in demand or supply. Therefore it is considered in planning.
    The Product Planning Details screen is mainly a planning screen, giving an overview on the planning situation for a product in a planning area. The projected stock reflects the planning behavior, displaying the shortages relevant for the planning run.
    As the safety stock has to be always in stock, the projected stock takes it into account as an immediate demand. That is why it reduces the projected stock, for example, if the stock on-hand is 0, then the initial planning situation for the product with a safety stock shows a negative projected stock.
    For more information please check the help document “Material Planning Settings “ under section safety stock which explain with pictorial rep.
    hope it help you.
    Regards,
    Suresh

  • How can we distinguish quality stock in APO with unrestricted stock

    Hi Friends,
    Please tell me the steps required to distinguish quality stock in APO with unrestricted stock.
    With regards,
    Balaji Sajja
    Edited by: Balaji Sajja on Mar 29, 2011 5:49 AM

    Hi Balaji,
                 I am not sure about which steps you want exactly to differentiate the stocks However, I can tell you the differentiation of stocks by ATP category.APO maps stocks as orders, and uses ATP categories to differentiate between the various stock types. SAP APO manages storage locations as sub-locations and batches as versions.
    we can differentiate the Unrestricted Stock & Quality Stock by ATP category.
    Quality Stock = ATP Category-CF - InspctnStk - Stock in quality inspection &
    Unrestricted Stock = ATP Category CC-Stock- Valuated, unrestricted-use stock
    In any view, product view/receipt view, under ATP category column, you will see these ATP Categories by which you can differentiate them.
    Regards,
    Saurabh

  • Quality Plan - Quality Stock

    Hi All Experts
    I had a prolonged problem related to Quality Plan / Quality Stocks . We are a manufacturing firm procuring lot of components from outside (BOP). Some of the items are marked for quality inspection prior to be posted as Un restricted stocks .
    The Problem is that I procured a item say "X" which is defined as Quality Inspected item in Material Master . At the time of Goods Receipt (MIGO) the document was generated wrongly eg the qty inwarded 40 against the actual 50 nos(mvt type 101) . The Document get generated and was approved in quality also and the stocks simply moved to unrestricted stocks . *Now when the problem was tracked and we tried to reverse the above MIGO document the system is unable to do the same as the MIGO doc is trying to trace the stocks as Quality inspection but against the " Quality Plan " it has already moved to Un restricted stocks .*
    I am not able to find the solution for the same as I am not very much competent with Quality Module .
    Pls revert back at the earliest with your suggestions as it is required to close the Year end activities
    Rgds
    Manoj

    Dear Manoj,
                       Go to MIGO ---> Select A01(GOODS RECIEPT) & R01 (PURCHAGE ORDER) -> Enter PO no. & select the item to be reversed.-> Movement type -- 102 -> Enter Delivery note no.-> Enter Quantity to be cancelled ---> Select stock type where stock is available /posted previously (Unrestricted) ---> POST IT & note the no. Then go to QA12 -> Enter its inspection lot no. -> go to Usage decision--> Functions -> Cancel Lot--> Then SAVE it. Thus the inspection lot also cancelled.
    Check this Reversed Quantity in PO by T-Code ME23N. This quantity will reversed in to that PO. Now you can again do the GR of correct Quantity.
    Please check & revert.

  • Canceling a billing doc for which accounting doc not yet generated

    Hello,
    I have strange issue in canceling billing doc. What happened user created Intercompany billing doc IV against a delivery and accounting doc also released to FI. After that he found that value in that IV doc is not correct so he went and cancelled that doc IV and he created internal credit memo IG .But for this IG the accounting doc not generated due to FI period closing. Because the IV is created in the month of Oct and IG is created in the month of Nov'07.Due to this issue Accounting document not generated for this IG doc.
    But unfortunately by mistake he went cancelled the IG doc and it created IV again. Now what happened both IG and new IV created are showing in cancelled status. This is because if we cancel a billing doc for which accounting doc not created, then both doc will turning into cancelled status in doc flow. This is confirmed similar situation in my quality box and confirmed.
    Now can anybody come across this kind of issue and tell me what is the best approach to handle this kind of situation.
    Thanks
    Mathi

    Hi Nina
    As you are doing Delivery and then billing  with the service item category ZTAD , so go to VOV7 and check wheather the Billing Relevance ( Delivery related billing ) has been maintained or not .
    Also check wheather in VTLA & VTFL copy controls  ,  ZTAD item category has been maintained or not
    Regards
    Srinath

  • Error while cancelling GR material is at Block stock

    Hi,
      I have created a GR for material QM view is maintain , after GR material updated from QM it is rejected,  then we have transfer it in Blocked stock in QA11  now we want to cancel the GR,  but while GR  cancel with MBST or MIGO  the stock type it is shoing as X  i.e quality stock  now in quality stock is 0  because material is at blocked stock.  so while cancelling it is giving error as  Deficit of SL Stck.in qual.insp 5,000 NO : 928 MS10 S101
      how to solve this,
      regards,
       zafar

    Hi
    you have to move the stock first quality only.  once you got the stock in quality you can send the material to vendor with (122) movement type.
    For your reference:
    1. SAP NOTE 175842 needs to be implemeted first.
    2. User Exit QEVA0008 needs to be activated.
    3. Then First of all reverse the UD by transaction QA12, by clicking the Customer Function Tab.
    4. Now the stock can be reversed for the same Lot by running program RQEVAC50 in SE38.
    above procedure you have to do must if amterial belongs to quality.
    laxman

  • Problem with Material Stock

    Dear all,
    My client wants to implement POD as the customer wants to be billed only on receipt of the material.
    We have made the necessary setting for POD.
    Now when we do PGI for the delivery the stock for that material is moved by 601 movement type. This stock is not reflected in MMBE nor does its movement is captured in MM51 (till doc is released through VLPOD).
    How can i keep the track of this material.
    I am looking for report same as MMBE where it gives list of all material in our plant(s) + special stock (Consignment stock) + other details like quality stock etc etc.
    This is required during checking the stock at month at for that month.
    Please guide.
    Thanks
    Shailendra Panhale
    Edited by: Shailendra Panhale on Mar 25, 2009 10:06 AM

    MB5B calculates backwards from today all the material documents and arrives at the stock quantities. The stock values are the values associated with each material document, either debit or credit. Apart from the material documents the price change documents (which get generated when MR21 is done) also will be taken into account for arriving at stock value.
    I think probably price change (MR21) might have been done on back date after 31.01.08.
    Regards,
    GSL.

  • Cancellation of sales order with subsequent documents

    hi,
    i created an order on IDES followed with a delivery, a transfer order , posted the goods issue and created the billing doc. with ref. to del.
    no accounting documents were generated when i checked the billing doc. I cancelled the billing doc. and now it shows the status of the invoice and invoice cancellation as CANCELLED, but when i try to delete the delivery, it says : BILLING OPERATION. FOR ITEM 10 AND 20 EXISTS AND TRANSFER ORDER FOR ITEM 20 EXISTS...
    wat do i do now ? been trying to cancel the order , if u ask me to cancel goods issue, then plz guide me how that is done too ?
    thnx in advance.

    To cancel the goods issue, you have to cancel the material document created. Use VL09 to cancel the Goods Issue. Use LT15 or LT0G for Transfer order cancellation, VF11 cancels the billing document and VF26 cancels the invoice list(if created). Check your document flow to see if there are any documents. Make sure you check the document flow for all the items, not just the header.
    Srinivas
    Welcome to the forums at SDN. I see that you registered today. Please go through the community guidelines located on the left side of your SDN page.

  • Cancellation of billing document with out cancellation of excise invoice

    Dear Sir,
    I want to control the cancelation of billing doccument. Condition is that with out cancellation of excise invoice there should not be any cancellation of billing document and delivery document.
    REgards
    Bharat

    You can try with Routines
    Create a routine (can take the routines no 5 / 6 as reference to create the new routine and mention not to cancel the billing doc if it is referenced to create any excise invoice) and assign the same in the required billing type definition.
    Thanks
    Harikishan

  • Remove quality stock

    Hi,
    we currently have stock in quality inspection, but no inspection lots. I've tried to manually create an inspection lot (QA01) and then in QA11 release this stock to unrestricted. So far, I have not been able to move anything from quality stock. Inspection lot origin is 05.
    Are there any specific settings I'm missing?
    Thanks in advance!
    Br,
    Lars

    >
    Lars H wrote:
    > QVM2 could most likely do the trick for me, but now I'm having problems assigning lot quantity to the inspection lot. I guess I need the inspection lot in status SPRQ, but all I get is REL and CALC.
    Please understand excisting QI qty you can't assign to manual created insp lot or in other words manual created lot will not get SPRQ status.
    If you don't have any lot with status SPRQ that means you can do stock posting with 321 movement tupe with t-code MB1B. During this transaction if you get error message like inventory posting possible in QM only, in this case you can remove qty with cycle/ inventory posting t-code (MI01/ MI04/ MI07).
    Hope this helps.
    Thanks!!!

  • After UD stock is in Quality stock

    Hi All,
       I am getting a problem with the Inspection lot, After doing UD for the inspection lot , System status is showing   UD   ICCO SPCO STUP HUM means stock posting is completed but actually the stock is not moving from quality stock to Unrestricted stock. Can anyone help in this problem?
    Neel

    Hello Neel,
    Did it happened  in one of the 4.6 version of SAP ? I guess I have seen something similar in 4.6C earlier ? If it  is has happened as one of the case then perform the posting in QA12 but if it  is been observed quite often then I will suggest to raise an OSS note as the lots status is already 'Stock posting completed'.
    Cheers
    Kaushik

  • Material in quality stock to unrestricted

    Hi,
    I have a material in quality stock and I want to  transfer it  to unrestricted. No inspection lot exists of that material  and all the usage desicions have been taken. I have read to generate a manual inspection lot with insp. type 08 or 0800, but I don't if its correct and how can I do that?
    regards,

    Please check the exact flow of the process.
    For a Material with Inspection setup in QM view of material master.
    step1
    The moment you post GR , the stock will be received into QI status in IM
    and in WM stock will be under storage type GR Area External Rcpts Q status .
    Step2.
    Using LT06 create a TO for the Material document IM stock will be in QI status
    WM stock will be under selected storage type (during TO processing ) in QI status.
    step3.
    Then complete the usage decision against the Inspection lot using QA32.
    movement type 321 is triggered and stock moves from QI to unrestricted stock in IM.
    step4.
    Confirm the TO created in Step 3.
    step 5.
    create a TO against PCN created in Step 3.and confirm.Stock will be in unrestricted status , available stock in WM.
    Since you are saying that stock is in Q status at WM level.
    pl. check if any PCN, TO is open for the Material
    and try to close those by either creating a TO against PCN - LT05
    or confirm if TO exist by using Lt12.

Maybe you are looking for

  • HP w1907 microphone?

    I have an HP Pavilion a6112n PC running Vista and an HP w1907 monitor.  I just signed up for a Skype account and tried to make a call.  I could hear and see my friend, but she couldn't hear me.  My Skype message said that it can't detect a mic sound

  • OSB Branch Problem

    Hi there, I have created a set of Business Services backed by SOAP services and then Proxy Services for each (3). The three Proxy Services are then configured in a new "Wrapper" Proxy Service which uses one of the Request Parameters to do a Branch. T

  • My MacBook Pro will not powerup (even when connected to power supply).

    My MacBook Pro will not powerup (even when connected to power supply). The caps lock key is the only light on.

  • Is CS5 Web Premium compatible with Windows 7 64 bit?

    I just placed an order for CS5 Web Premium. I just assumed that if a software states compatible with windows, that is sufficient. I bought a license for Quikbooks books Accounting Software and just read in the very fine print not compatible with 64 b

  • MDX formulae reduces application performance

    Hi, I have few MDX formulae in my account dimension which is built as per our reporting requirements. But unfortunately having these formulae in greately affecting the performance. It takes 7- 8 minutes to generate a report if I have formulae. Can an