Cannot access configuration for cisco srp527w voice
I am trying to input my SIP configuration to the cisco srp527w voice set up but there is nothing there that I can input. All I can see is info, system, user 1 user 2. When I go to system, it ask for IVR user password...I tried using admin and cisco nothing change. Appreciate if some could help. thanks
Make sure you have filled out all of the HTTP/HTTPS credential data in DCR for these devices. RME will only use HTTPS to fetch VPN concentrator configurations.
Similar Messages
-
Hi All,
Our problem is, we have Cisco Works LMS 3.0.1. cannot archieve configuration for cisco 3000 series vpn concentrator.
Any help would be greatly appreciated.
Thanks in advance.
SamirMake sure you have filled out all of the HTTP/HTTPS credential data in DCR for these devices. RME will only use HTTPS to fetch VPN concentrator configurations.
-
RAID Configurations for Cisco servers
Hi All,
What is the RAID configuration for Cisco Appliance(Version 8.5) like CUCM, CUPS, CUIC, Unity etc?RAID Configuration will be done while installtion itself or we need to do it explicitly?
Regards,
AdithyaHi Geoff,
Thanks for the reply. Just wanted to know whether if this RAID configuartion is similar to the other server RAID where we install Cisco applications.(Like OS & Application Software is RAID 1 and Database is RAID10).
Regards,
Adithya -
Cisco works LMS 3.0.1 does not archiever configuration for cisco 7201 router
Hi All,
We have Cisco works LMS 3.0.1 and it does not archiever configuration for cisco 7201 router.
Any help would be appriciated.
Thanks in advance
SamirHi,
*** Device Details for d0151-100 ***
Protocol ==> Unknown / Not Applicable
Selected Protocols with order ==> TFTP,SSH,HTTPS
Execution Result:
Unable to get results of job execution for device. Retry the job after increasing the job result wait time using the option:Resource Manager Essentials -> Admin -> Config Mgmt -> Archive Mgmt ->Fetch Settings
This is the error while doing syn archieve.
I am not sure about Rtr7000 version but we have latest Rtr7000.
Waiting for your kind reply.
Samir -
How we archieve configuration for Cisco ASA 5500 series appliances
Hi,
We need to archieve configuration for Cisco ASA 5500 series appliances.
We have Cisco works LMS 3.0.1.
Device package installed is 4.2
Any help would be appricated.
Thanks in advance.
SamirHi ,
Thanks for your answer.
Right now we are using TACAS to login in to the ASA. That means we need single username and password to login via
Cisoworks. Am I correct ?
Waiting for your reply.
thanks,
Samir -
CANNOT ACCESS DOWNLOAD FOR READER EVEN WITH CHANGED PASSWORD
CANNOT ACCESS DOWNLOAD FOR ADOBE READER EVEN WITH A CHANGED PASSWORD AND I HAVE BEEN ON CHAT
There are several possibilities as to why a user account may
not be correctly available or a password to it reset to fix it.
One of them may be, if the short name of the computer or of
an account was changed by the user; and later the system
may appear different or changed, with some of the user acct
settings or preferences no longer as they were prior to that.
There is a way to create a new admin level user account and
then move the older user info into the new account; then go
in and delete the other one. I am not certain as to how to do
this; but the topic has come up in these discussions, and the
general path is about the same from Panther through Leopard.
A few details may be named different, but similar as things go.
• Mac OS X: *How to change user short name* or home directory name:
http://support.apple.com/kb/ht1428
• How do I change owner's name in my Mac:
http://www.askdavetaylor.com/howto_change_owners_name_applemac.html
While these kinds of details may not be behind the exact problem in
the computer in question, directory and user account issues do often
have similar causes. Often, they are user-caused events. If the general
Directory of information on the hard disk drive has a problem, the use
of a third-party disk tool such as Disk Warrior is usually advised. If that
were needed, usually more evidence across the system would appear.
There may be a way to use a Setup Assistant to recreate a new user
experience and start over with a new admin account and user name.
Then go into the system to ferret out the old user info.
+Sorry I can't be of more help; as I am being distracted by an elderly+
+person who can't figure out why I am online or what it means to be.+
Good luck & happy computing! -
Have used bilmac@mac email address for years last couple of weeks am getting message icloud needs password which it then rejects, when I try to reset password,they want email to verify i cannot access email and the security question is D. O B. it tells me I have wrong date of birth. so I am stumped, any ideas bilmac
COME ON PEOPLE. (WHY ARE THE LETTERS SO BIG HERE?) I AM VERY OLD AND JUST LIKE THINGS TO STAY THE SAME. I DID NOT, DO NOT, WANT ICLOUD TO DO ANYTHING I HAVE NOT USED IT AT ALL YET IT HAS MANAGED TO MESS UP MY EMAIL ADDRESS WHICH I HAVE BEEN USING FOR YEARS, IT ASKS FOR PASSWORD THEN REJECTS AND WHEN I TRY TO RESET WITH APPLE ID THEY ASK FOR SECURITY AS I CANNOT ACCESS THE EMAIL ADDRESS THEY HAVE FOR ME BECAUSE ICLOUD ASKS FOR PASSWORD, THEN APPLE TELL ME I DONT KNOW MY OWN DATE OF BIRTH, VERY CONFUSING
-
Optimal configuration for Cisco E3000 Router
Hi All,
Following are the details of my current home network setup, I would like to hear more recommendations and drawbacks of this setup.
ISP has provided with a Cisco DPC3825 DOCSIS 3.0 Gateway which has 4 Ethernet ports and a wireless networking but only 2.4 GHz.. This router is connected to the cable CPE box to internet. I have enabled the Firewall features of this router and disabled the Wireless network. This has also the DHCP server running.
The Second router is a Cisco E3000 which supports 2.4 GHz / GHz wireless networking. Connection to gateway is made via the 1st Ethernet port of gateway and then to the Internet port of E3000 router. I have connected my wireless devices to E3000 with GHz wifi lan. This router also has the firewall activated and DHCP server running as well.
Both routers have WEP2 Personal / AES security configured. Currently these two devices are on two different IP ranges ..etc gateway is 192.168.0.1 and e3000 is 192.168.1.1.
The E3000 is primarily configured for my online video for TV (Panasonic Vireacast). Please let me know if this is the best configuration or any other possible options.
Thanks,
RGThis configuration is called LAN to WAN configuration and this is the best configuration considering that you want to behave both the router as a router.
Because the other confiuration would be LAN to LAN then you can only use 1 router as a router and 2nd router as a switch.
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=529c188bc0ee4f7da79ffc22f2be33ec_4579.xml&pid=80&r...
The first configuration in the article is is LAN to LAN, scroll down the window for LAN to WAN configuration. -
TACACS+ configuration for Cisco ASA
I tired configuring TACACS+ configuration for ASA but unable to complete it. I have ACS 3.3 for all other Cisco Routers and Switches
Leo,
I was looking around and come across this post. It's very late, however, wanted to add my inputs for other community members.
RSA Token/One-Time-Password support available with ASDM only in SINGLE ROUTED MODE. If you are in Single Routed Mode, you can do OTP with ASDM if you are running ASA 8.2+ with ASDM 6.2+.
If the firewall is running in multi-context and transparent mode. It won't work. Below is the enhancement request that was filed for the same feature to be supported.
CSCtf23419 ASDM OTP authentication support in multi-context and transparent modes
With WLC is yet not possible and there is a enhancement request filed.
CSCuf61598 WLC: Need ability to support multiple sessions via OTP authentication
~BR
Jatin Katyal
**Do rate helpful posts** -
Cannot access site for bonus software download included in printer purchase
cannot access novadevelopment.com
Works fine for me. Try a different browser.
http://www.novadevelopment.com/
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired! -
Configuration for Cisco SPA112
Anyone managed to configure SPA112 adaptor for incoming calls?
I have configured for outgoing and able to make calls but incomming just nothing.....
I have 1 channel and one number associated to the SIP account
Firewall ports 5060 - 5062 are allowed through
internal IP address has ports forwarded to itI think you're the first one to post that the Cicso SPA 112 will work for outgoing calls. Would you be able to send me the configuration on how you accomplished this and what settings you used?
Do you use Skype out credits or simply dial from one Skype account to the other? I would assume you do not have a Skype-IN account?? -
Since yesterday afternoon, I keep getting a message that Facebook is taking too long to load and I cannot access it. I cannot tell if it is a Facebook problem or a problem with Firefox. I have looked at everything I can look at, but can see no problem. I am able to access everything else. HELP!
== URL of affected sites ==
http://facebook.comlog4j is not Commons Logging. They're different packages. You can use log4j within Commons Logging, but they're not the same thing and their classes are not interchangeable.
It looks like this thing is using Commons Logging. -
Cannot access ASA5510 for first time config ASDM or PING
Hi
I have a fresh out the box asa5510 with 8.4 on it.
I have built these before but for some reason cannot get this one to work. I am consoled on, have applied the following config but can still not ping to or from, can not asdm, cannot http/s. Arp table shows device it tries to ping, but device trying to pping it has incomplete arp entry.
I am really stumped, does anyone have any idea?
Please also see attached diagram for topology.
Thanks in advance
ciscoasa(config)# show run
: Saved
ASA Version 8.4(4)1
hostname ciscoasa
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
shutdown
no nameif
no security-level
no ip address
interface Ethernet0/1
shutdown
no nameif
no security-level
no ip address
interface Ethernet0/2
shutdown
no nameif
no security-level
no ip address
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
nameif management
security-level 0
ip address 10.90.255.99 255.255.255.128
ftp mode passive
access-list MANAGEMENT extended permit ip 10.0.0.0 255.0.0.0 10.0.0.0 255.0.0.0
access-list MANAGEMENT extended permit icmp 10.0.0.0 255.0.0.0 10.0.0.0 255.0.0.0
access-list MANAGEMENT extended deny ip any any
pager lines 24
logging enable
logging console debugging
logging buffered warnings
mtu management 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
icmp permit any management
no asdm history enable
arp timeout 14400
route management 0.0.0.0 0.0.0.0 10.90.255.126 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 0.0.0.0 0.0.0.0 management
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
telnet timeout 5
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect ip-options
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http
https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email
[email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:79dc4cfc6161dcbd01a016ad9a2a2ca5
: end
%ASA-7-111009: User 'enable_15' executed cmd: show running-config
ciscoasa(config)#Hi,
In this configuration:
interface Management0/0
nameif management
security-level 0
ip address 10.90.255.99 255.255.255.128
access-list MANAGEMENT extended permit ip 10.0.0.0 255.0.0.0 10.0.0.0 255.0.0.0 // ACE1
access-list MANAGEMENT extended permit icmp 10.0.0.0 255.0.0.0 10.0.0.0 255.0.0.0 // ACE2
access-list MANAGEMENT extended deny ip any any // ACE3
In ACE1 the network 10.0.0.0/8 in the destination is not in the same network with 10.90.255.0/25 (MGMT interface)
Can you try these ACEs:
access-list MANAGEMENT extended permit ip 10.0.0.0 255.0.0.0 10.90.255.0 255.255.255.128
access-list MANAGEMENT extended permit icmp 10.0.0.0 255.0.0.0 10.90.255.0 255.255.255.128
access-list MANAGEMENT extended deny ip any any
I agree with Jouni, in first time use a PC directly to the MGMT interface.
and use the clear arp command to clear the ARP cache
Best regards -
Collector Configuration for Cisco LMS
Hi,
I have a cisco LMS 3.2 , what collectors need to be configured inorder to get the critical alarms such as HighBroadcast Rate in networkDevice Fault Manager (DFM) is the module or application that would give you these kind of alerts;
a quick overview about DFM can be found here
first I recommend to install all available updates and patches for LMS;
after the initial discovery of LMS to get your devices into DCR you have to import device into DFM as described here
DFM is working with SNMP polling, thus you should get the events in the AAD (Alerts and Activities Display) if DFM has SNMP access to your devices;
Be aware, that DFM counts non-unicast packekts for the HighBroadcast Rate (broadcast and multicast packets; ifInNUcastPkts + ifOutNUcastPkts)
also read the user guide for DFM to get a general understanding of DFM -
LZW 4G LTE Router Configuration for Cisco 881W (Teleworker, VPN)
I can't get the configuration of the the router to allow traffic on my company's VPN. The router is connected to the internet and otherwise works fine but whenever I attempt to connect via Cisco AnyConnect or the Cisco router, I can connect but can't access any intranet resource, email, etc. In essence, I can authenticate but can't do anything.
I've tried contacting NetGear and they referred me to Verizon. I contact Verizon and Technical Support does not have any information about how to configure their own routers. I'm waiting to hear back from an escalation group in my company's technical support.
I tried opening ports for UDP/TCP already and I attempted to create a static route but the router tells me that my info in incorrect (but I have no idea what is wrong either).
Has anyone come across a similar situation or could help point me in a direction towards a solution?
Thansk.Check with the network administrators for your company. They should be able to confirm the version of your Cisco AnyConnect VPN and the requirements that it needs to open and sustain a tunnel. Once you learn the requirements you can come back to the VZW forums for assistance on configuring your device.
Normally when a VPN authenticates but does not allow any communcation it means that there is a port, firewall rule or NAT feature conflict somewhere on the local network. For example, the old Cisco IPSec VPN requires UDP ports 500/4500, IP 50 and TCP 10000 to be open in addition to NAT-T enabled on the VPN server. Your company may have customized the VPN for thier enviornment so you really need the details before you can move forward.
A good link I like to save for instances like this (old Cisco VPN):
http://www.canvassystems.com/blog/articletype/articleview/articleid/14/how-to-fix-cisco-vpn-client-error-412.aspx
Maybe you are looking for
-
24" iMac for Good for Pro Use?
Hi, I am considering getting a 24" iMac. I would like to get a Mac Pro with a pro display but my budget does not stretch that far. I have no worries about the speed of the Duo 2 Core 2.4Ghz, my concern is about the DISPLAY. I am going to be working i
-
Budget check only after release?
hi, i maintain cost activity in project and when i save it, it checks against the budget... is it possible such that it will check the cost activity only upon release of the activity? in other words, i can save it (even if it has greater amount than
-
Photo Stream on Aperture making duplicates
I've been using photo stream with Aperture and my iphone with no problems since it first came out. But suddenly this week the photo stream feature on aperture started acting strange. Now every time I open Aperture, it downloads a new copy of photos t
-
Problems with a adaptec ash-1233 card
i am tryin to install a pci card in my computer so i can use the full 200 gigs of my HD and this is the only pci/ ata adapter card i could find. does anyone know how i can get this to work with my computer that i have now? i have a blue and white g3
-
No Bootable Device problem on MacBook Pro
Okay, so I wanted to try to install Windows on my device using Bootcamp assistant. I partitioned it, but did not continue with the installation because I found out about parallels Desktop and changed my mind. After installing windows 7 using parallel