Cannot access ebay, it says cannot find server

cannot access ebay, it says cannot find server

Thanks, this seems to have worked. I held the alt / command keys down until it fully opened. Previously I have only been holding them down as I click on the icon. I had to use the last option rather than the repair permissions but it seems to have done the trick, cheers

Similar Messages

Ios7 now installed on my iphone 4S, emails show up but I cannot access them, message says cannot get mail - server failed. Why is this happening?

My message titles appear but I cannot access them since they are greyed out. Message in front says server failed. Messages accessable on regular computer, why the problem? Yesterday I installed ios7 on my iphone 4s..

I have this question too! I updated my Iphone iOS software last night and this morning, I cannot access my mail as it says that I cannot connect to the server. On both my Iphone and Macbook, when I open mail- it says that the server rejected my password for ICloud. I can also log in to ICloud online, so I know that it isn't my password- HOWEVER, when I try to access mail through the cloud online, it tells me that it is unable to obtain my mail. Is there an iCloud server problem currently? Is it a software problem? Please help with any suggestions! Thanks in advance.

Cannot access mailbox hosted on remote EX2010 server through OWA

Our Internet facing OWA is published through our EX2013 server as MAIL.CONTOSO.COM
We have multiple sites acrossed global. OWA proxy from EX2013 to EX2010 works fine for NZ and US. But for some reason when tries to access mailbox on UK EX2010 SP3 server through the EX2013 OWA, I got error below:
OWA-Error: Microsoft.Exchange.Data.Storage.NotSupportedWithServerVersionException
X-OWA-Version: 15.0.775.32
X-FEServer: EX2013-CAS
X-BEServer: EX2013-CAS
Checked the mailbox ExchangeVersion on the UK EX2010 server, it is 0.10 (14.0.100.0) same as NZ and US EX2010 mailbox users.

What is the version using get-exchangeServer | FL *Version* ? 2010 Sp3 is required at a minimum : Build 14.3.123.4
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

When I go to options I cannot access "content" so I cannot make any changes to popups

I've been getting a lot of popups and want to check if I have block popups clicked but I cannot access the "content" tab under options. I can click on all the other tabs but the "content" tab just shows the last tab I clicked on...

One reason for lots of pop-ups is a bad add-on. I suggest starting your cleanup here:
(1) Open the Windows '''Control Panel''', Uninstall a Program. After the list loads, click the "Installed on" column heading to group the infections, I mean, additions, by date. This can help in smoking out undisclosed bundle items that snuck in with some software you agreed to install. Take out as much trash as possible here.
(2) Open Firefox's '''Add-ons page''' using either:
* Ctrl+Shift+a
* "3-bar" menu button (or Tools menu) > Add-ons
In the left column, click '''Plugins'''. Set nonessential and unrecognized plugins to "Never Activate".
In the left column, click '''Extensions'''. Then, if in doubt, disable (or Remove, if possible) unrecognized and unwanted extensions.
Often a link will appear above at least one disabled extension to restart Firefox. You can complete your work on the tab and click one of the links as the last step.
Any improvement?
(3) You can search for remaining issues with the '''scanning/cleaning tools''' listed in our support article: [[Troubleshoot Firefox issues caused by malware]]. These on-demand scanners are free and take considerable time to run. If they finish quickly and especially if they require payment, you may have a serious infection. I suggest the specialized forums listed in the article in that case.

Since downloading Firefox 5 last week, we cannot access the internet. The message "server not found" pops up along with the statement "firefox can't find the server at (whatever webpage you enter). How can this problem be fixed..other browsers stink.

as stated above. I don't know what else to say.

(The annoying error) Internet Explorer cannot display this page Solved
This problem can be solved in seconds with just 8 or 10 clicks of your mouse. As you are reading this you are already in Internet explorer. At the top left hand side of your screen you should see the below words.
File Edit View Favourites Tools Help
If you can't see the above words then right click on any blank area on the third bar from the top of your screen and click on menu bar
Now click on Tools then click on Internet Options. Then click on the Advanced tab at the top right hand side of that page. Now click on the Reset button near the bottom right hand side. Now close and then re-open your Internet explorer.
That's it folks you're all done! Best regards to you all, PROBE

Cannot access created sharepoint site other than server machine

I have installed SP2013 in windowsserver2008, i have chosen standalone server while configuring the server. I have created a toplevel
site using Central Admin with Admin permissions. I opened the newly created site in the browser successfully. But i cannot connect this site from another machine using browser, i can able to open the site in the same installed server not in another machine
using a browser. Can you please suggest me how can i share the created site to users to get work around.

This sounds like a networking/dns issue and nothing related to SharePoint. Once your networking is setup correctly, you should be able to access the farm with the url http://{Server Name}/. But there has to be a dns entry for [Server Name] on your
domain controller that points to the ip address of your SharePoint server and the SharePoint Server has to be reachable over the network on port 80.
Doug Hemminger http://www.sharepointdoug.com
What is the way to find out the network/ dns issue?
And how to solve if any of this has >

Cannot access OWA/ECP except on the server

Hope someone can help.
Out of the blue, we cannot seem to be able to access ecp by mail.domain.com format.
On the server we can access OWA via https://mail.contoso.com
Internally, accessing OWA works via https://mail.contoso.com
Going to our static ip address externally via https://<office-ip>/owa does not work. mail.contoso.com doesn't either.
I have restarted the server with no luck. It appears all services are running, however I had to start Microsoft Exchange Transport Delivery.
We can receive emails and check them via the server itself.
Any ideas what the problem is?
The port is forwarded to the Exchange server and appears to be open. I'm going to contact our ISP but since it's a business account, it should just work. Emails are being received on port 25.
Thanks
Could this be a firewall issue? HTTP and HTTPS are allowed for all and enabled.

Hi
Check your certificates and ensure that they have the correct entries ?
Check your firewall and ensure that the NATing is done correctly
Check your public DNS settings
Check your OWA authentication settings
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
(MVP)

OS 10.4 clients cannot access Shared Mac folder on W2k Server - URGENT

We have a network of about 25 computers, 10 or so of them are Mac OS 10.4, the rest are Win XP Pro PCs. We have a server dedicated to file sharing. We basically have one main shared folder called "FILES". This is shared for PCs and Macs. Recently after a restart of the server (for regular maintenance), the Macs could not see the shared Mac volume (FILES), PCs could access the share without a problem. After a few minutes (15 or so) the Macs could all of a sudden see the share and
everything was fine.
However, we just restarted the server again and we're having the same issue again. The difference is, this time, after waiting for a few hours, the Macs still cannot see the Mac Share. The macs connect to the server via TCP/IP, the users use their usernames and passwords and can connect to the server, however, the only volume they see is the Micrsoft UAM volume.
When we created a different folder and shared it (through MMC), the Macs could see and access that one.
We get an Event ID 12061 in the System Event Log as the user tries to connect to the share. I found a Microsoft KB article, but no solution to the problem was given. http://support.microsoft.com/kb/q136300/
Here are some things I have tried to remedy the issue, please keep in mind we cannot change the name of the share (FILES) becuase of the thousands of file mappings in quark, etc.:
Again Restarted Server
Stopped Sharing the folder, then reshared it
Stopped sharing the folder
Uninstalled / Reinstalled Appletalk Protocol from network adapter
Uninstalled / Reinstalled File Services for Macintosh [Restarted]
Uninstalled / Reinstalled Appletalk Protocol from network adapter again [Restarted]
Reshared the folder
Created a new mac share called TEST (Macs could see and access)
Moved data from Files to TEST, now Macs could not see TEST
Moved data back to FILES
Created a folder called FILES2, moved data from FILES to FILES2
Stopped sharing FILES (PC and Mac), renamed FILES to FILES1
Renamed FILES2 to FILES (Macs could not see volume)
It seems as though the problem is with an individual file or two, which sort of corresponds the what Microsoft has written regarding the error.
Has anyone had any experience with this issue? Any insight or solution to this issue is greatly appreciated.
Thank you!

It's very important to be as specific as possible when discussion network service access. In your question, it sounds like you want the macs to attach to FILES using SMB/CIFS, but you also call it a Mac share, so it's not obvious if you mean an AFP share or just a share for Macs to use.
You should know that the Macs can connect to either AFP or SMB volumes, and they can browse for SMB over TCP/IP and AFP over both TCP/IP and Appletalk (Appletalk must be turned on and browsing active in Directory Access).
Connecting via SMB to a volume hosted on Windows2K or higher server will fail with the default settings, which require secure connections not supported by Mac OS X (because Samba doesn't support it). To overcome that problem, see this article:
http://www.macosxhints.com/article.php?story=20030922153448490&query=-5000
(scroll down to one of the top-level replies, which explains in detail how to deactivate secure connections)
You might also be able to improve reliability by editing the SMB settings in Directory Access and setting a WINS server, but it depends on your network.

HT201210 I cannot access to the Apple iOS update server.

I need iOS 4.2 for several useful apps but I can't update it. I tried every trick suggested on support.apple.com, without success. I took an appointment at a Genius bar in London for next wednesday.
Thanks for any help.
Pierre

Any error numbers given? If yes, check this article for more info:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. FollowiTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.
Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good network.

Cannot access photos in iPhoto through Finder

I recently upgraded to iLife 8 from 7 because of a hard drive crash.
If I open Finder to look for a picture, and I click on the iPhoto Library, it opens up iPhoto, instead of showing me the folder in Finder.
Also, if I want to upload a picture file from my iPhoto library to the internet (i.e. an e-mail attachment), I can't, because I can't click on the iPhoto Library folder to open up the pictures.
Any ideas on how to change this? In the previous version I had, it would open like any other folder with files in it. That's what I want to happen again.

cpops
With iPhoto 7 (iLife 08) the old iPhoto Library Folder is now a Unix Style Package File. The change was made to the format of the iPhoto library because many users were inadvertently corrupting their library by browsing through it with other software or making changes in it themselves.
It has never been the correct way to access the files by rooting through the iPhoto Library Folder - there are no user serviceable parts there and any time you do you risk damaging the Library.
There are many, many ways to access your files in iPhoto:
*For Users of 10.5 Only*
You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Apple-Click for selecting multiple pics.
Uploaded with plasq's Skitch!
You can access the Library from the New Message Window in Mail:
Uploaded with plasq's Skitch!
*For users of 10.4 and 10.5* ...
Many internet sites such as Flickr and SmugMug have plug-ins for accessing the iPhoto Library. If the site you want to use doesn’t then some, one or any of these will also work:
To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. However, if you're using Gmail you can use iPhoto2GMail
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
*If you want to access the files with iPhoto not running*:
Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
All of the above are faster and safer than rooting through the folders.
Regards
TD

I am trying to restore my iphone but i cannot access icloud to turn off find my iphone,what do i do?

help

You'll have to access icloud.com on a non-ios device and remove the phone from your account. If only iOS devices are available you would have to download the Find my iPhone App to do this.
Instructions at http://support.apple.com/kb/ph2702

Cannot access deployed JDeveloper App in Weblogic Server

I have built and successfully deployed an Oracle JDeveloper 11.1.2.2.0 web application using ADF security to a clustered (two servers) Weblogic 10.3.5.0 server. The login page comes up when I type in the URL but upon submitting the login page I get the following error:
Dec 3, 2012 10:35:47 AM MST ServletContext-/ContractRateAdjustmentWebAppView Info BEA-000000 JspServlet error: Servlet unable to dispatch to the following requested page: The following exception occurred:java.io.FileNotFoundException: /index.jsp
The is no index.jsp page in my application. Why is this page being looked for?

Thank you for the reply.
But Just I wnt to know some stuff related to ant command...
As this is my first deployment in weblogic 8.1.
This is what i have done...
1> Created a folder "ifejbproc" in...
D:\bea\weblogic81\samples\server\examples\src\examples\ejb20
2> And I copied following files to "ifejbproc" folder
application.xml
ejb-jar.xml
weblogic-ejb-jar.xml
build.xml <I created it as you seen in the previous msg>
com <Folder that consists of java class files>
3>Then I ran the setExamplesEnv.cmd in command prompt located in,
D:\bea\weblogic81\samples\domains\examples
4>Then I changed the cmd path to,
CD D:\bea\weblogic81\samples\server\examples\src\examples\ejb20\ifejbproc
5> Then I ran the ant command.
When i ran this command It created a ifejbproc.jar file but it did not included the java class files the ifejbproc.jar file.
Is any thing I need to do with the build.xml
Note: I commented the compile tag in build.xml
Waiting for your reply.
Thx,
babloo.

I cannot access facebook. Says password is wrong

Each Time I try to sign into Facebook it says password invalid. Tried changing password but still no success. Please help.

Is this happening on Safari AND the Application, or just the application?
If it's only happening on the app, delete it, and then re-download it, if it's failing after that, it would be an issue with the application. If it happens on both the web based Facebook and the Facebook application, it's an issue with something in your account.
Either way, you would need to look into contacting Facebook's support group

ICloud full, cannot access iCloud drive and cannot deleter files...

I am getting messages saying that my iCloud is full. Okay, I get it. So I look up how to free up space and find all the instructions on how to not have apps sync (which I've done) and to delete photos (which I've done), yet it's still full. I'm sure there are plenty of audio files on there that could be taken off as I do have iTunes Match however, I cannot for the life of me figure out HOW to delete any files off iCloud. I have tried accessing iCloud Drive on various computers and I get error messages and pop screens telling me to reload - shocker. So, how in the **** am I supposed to figure out what is taking up all this space on my iCloud and then, how do I delete it? I don't really "save" anything so I'm not sure what to do. Anyone else having the same issue and if so, any solutions? I do not want to buy more space but I want to be able to back up my phone. Technology is great when works, but this isn't working and it's frustrating. Thanks for anyone that has any helpful advice.

The following may have something that will help: Manage your iCloud storage - Apple Support

I buy an ipad from a man abot one month ago now it is asking for apple id of precios owner i cannot access his id and cannot know his id what can i do i dont have any information of the owner from which i bought it what can i do iam in trouble and i am pa

the given is problem

If the previous owner did not remove his iCloud account from the iPad, and you cannot contact him, you have wasted your money.
This is a security feature which cannot be bypassed.

Cannot access ebay, it says cannot find server

Similar Messages

Maybe you are looking for