Cannot access internet after upgrading to IOS 6.1.2 on iphone 4

cannot access internet after upgrading to IOS 6.1.2 on iphone 4.

ok here is the issue.
After i upgraded the IOS to IOS 6.1.2 I'm not able to use mobile internet as i have a data sim card.
As the settings provided by the service provider are not compatible with IOS 6.1.2 and the service provider cannot do anything about it, as it's something that has to be ressolved by apple.

Similar Messages

  • Is anyone having trouble with accessing email after upgrading to iOS 6?

    Is anyone having trouble with accessing email after upgrading to iOS 6?

    Is anyone having trouble with accessing email after upgrading to iOS 6?

  • After upgrading to ios 5.1 on my iphone 3gs, the battery percentage dosent work well, it dosent move. how can i fix the problem?

    after upgrading to ios 5.1 on my iphone 3gs, the battery percentage dosent work well, it dosent move. how can i fix the problem?

    Have you tried doing turning the battery level display off and then General -> "Reset all settings"? You won't loose any data and that should do the trick.

  • My problem is that after upgrade to IOS 6.1.3 my iphone not sounds! dont have sounds notifications for whatssap, FB, mails and can't listen music and talk with skype without headphones or speakers! only have vibrator and sound for one coming call!! what c

    My problem is that after upgrade to IOS 6.1.3 my iphone not sounds! dont have sounds notifications for whatssap, FB, mails and can't listen music and talk with skype without headphones or speakers! only have vibrator and sound for one coming call!! what can i do!???? Thanks a lot for help me!!!!

    I have a nearly identical problem with my Ipad 3. Mine is the left channel. I've yet to find help, but have found a number of other posts on this and other forums discussing the issue. People have tried restore, reset etc. Also, cleaning the ports with compressed air or cotton swabs. It appears to be a software issue, but no one is sure.
    Along with the original poster, I'd appreciate any help.
    As far as the 'level 6' poster, if you're going to be rude, please don't bother. Hope it was just a bad day.

  • After Upgrade to IOS 6.1, find my iPhone's map cannot see the street or city, especially in China, can we change back to google map in this app?

    After Upgrade to IOS 6.1 also with "find my iPhone" app, the map when locate my iphone cannot see the street or city, especially in China, can we change back to google map in this app?
    If the map cannot show details, how can we find my iphone? And it seem Apple just have an good idea for customer only but it is not function, why need to use Apple map in "Find my Iphone" if we all know it is not a good map!
    So stupid Apple!!!!!

    https://itunes.apple.com/us/app/google-maps/id585027354?mt=8
    It won't help find your iPhone, however.

  • Unable to browse Internet after upgrading to IOS 6

    After upgrading to IOS 6 (6.0.1), I have this strange issue.
    My iPhone suddenly after every alternative day stops browsing Internet. It connects to wireless succesfully but fails to browse Internet.
    I need to reset my network setting and reconnect to the network. But this is annoying any suggestions

    Does your phone receive a valid ip address from your router?
    Does it work fine when connected to other wifi networks?  If so, then I'd say your router is the culprit.

  • "Cannot Determine Location" after upgrading to iOS 6.1

    After upgrading to iOS 6.1 all the applications that rely on location can no longer update the location, they show the old location before the update. I tested the apple map, google map and earth applications and all behave same.  I flipped and flopped settings->privacy->location services but no change.
    Anyone else having the same problem?

    Solved it! A full power down and up cycle solves the problem.

  • [SOLVED] Samba cannot access shares after upgrade

    After upgrading samba and smbclient from 4.0.6-1 to 4.0.7-3 I can no longer connect to shares or authenticate with server in general.
    Cannot establish new connections. Already connected ones still works.
    Downgrading samba to 4.0.6-1 does not change that.
    Downgrading smbclient to 4.0.6-1 returns everything back to normal.
    I did reload daemons and restart samba.
    sudo systemctl --system daemon-reload
    sudo systemctl reload-or-restart samba.service
    Am I missing something?
    Logs reveal this error, which I did not find anywhere.
    /var/log/samba/log.smbd:
    [2013/07/17 14:50:45.729619, 0] ../source3/auth/auth.c:380(load_auth_module)
    load_auth_module: can't find auth method samba4!
    Last edited by liepumartins (2013-07-29 08:47:21)

    Removed samba completely and installed again.
    sudo pacman -R sama smbclient
    sudo pacman -S samba
    After this Samba did not start, like it used to before. Important bit of error message:
    /usr/bin/samba: error while loading shared libraries: libwinbind-client.so: cannot open shared object file
    So I did reinstall for some dependencies, that I thought might be responsible.
    sudo pacman -S libwbclient libldap ldb libaio libbsd
    Most likely it would be enough with libwbclient and libldap.
    I will mark this as solved.
    Last edited by liepumartins (2013-07-29 08:57:31)

  • Cannot access mail after upgrading from tiger to leopard

    When I accessed Mail from applications after installing leopard I received the following message "You cannot use this version of the application Mail with this version of MacOSX" any advice please?

    Hello Hannah:
    Welcome to Apple discussions.
    I think we need a bit more information.
    What method did you use to upgrade?
    What Mail level is on your system (highlight the Mail icon in your application folder and then +"get info.")+
    Barry

  • Problems with Hotspot, EDGE, and 3G internet after upgraded to iOS 4.3

    I just upgraded my iPhone 3GS to iOS version 4.3 , but after I installed it, the Personal Hotspot badge on Settings>General>Network appears, but it keeps at the "loading circle" sign (the same one when the iPhone is turning off). Besides that I realized that my 3G internet is not working, neither EDGE. none of the 3G or EDGE icons appears next to my carrier bundle, how it usually do. Wifi is working though. I tried to solve the problem restoring the iPhone, but the problem persisted even after the restore. What's happening to my iPhone 3GS?

    Hi man!
    have the same equipment and the same problem, who is your mobile operator?
    I'm from Chile and my operator is Movistar, I think they blocked the service hotspots.
    Best regards

  • HT1386 After upgrading itune on my computer to 10.5 and after upgrading to ios 5 on my 3g iphone, and after backup on my computer, my iphone simplay cannot open up. The screen lights up but it I keep getting the message, "there is no sim in your phone. Th

    I have upgraded itunes on m computer to 10.5. When I connected my iphone to the computer I was told that ios 5 is ready to be downloaded, and that I should back  up my iphone before doing the download. I did. Now I want to get my iphone back on and it just can't . The screen lights up, i select language and network but it tells me that my phone cannot be activated because the activation service is temporarily unavailable. what do i do?

    Try a Hard Reset.....
    Press and hold the Wake / Sleep button AND the Home button at the same time, keep them both pressed until the Apple Logo appears on the screen, it can take 10 or more seconds.  Ignore the swipe to turn off message.

  • Cannot access internet after updating to 4.2.1

    I updated my phone today to 4.2.1 and now I can't access the internet at all.

    Error messages?
    Is the issue with cellular data? Wi-Fi? both?
    Have you done the basics of reset, reboot, restore?

  • Cannot access Aperture after upgrade

    Hi, does anybody know how to re install aperture 3-1-2 that is not recognised on OS X Yosemite. I have tried upgrading since, but this didn't work.
    Are my pictures and Raw files retrievable? I am willing to buy Aperture again as a last resort, but will i still get my files back.
    Does anyone know an alternative please. Thanks Andy.

    Hi, does anybody know how to re install aperture 3-1-2 that is not recognised on OS X Yosemite.
    Did you buy Aperture 3.1.2 from the AppStore, or do you have a version with a serial number?
    The update to Aperture 3.6 is only available from the App Store. Before you can use the AppStore update, an Aperture version with a serial number has to be associated with your AppleID. This was easier, when Mavericks and the Aperture 3.5.1 update came out.
    Install Aperture 3.1.2, even if it will show a crossed out icon.
    Then launch the AppStore, sign in with your AppleID and look at the "Purchases" tab. Is Aperture listed as "Accept"? Or showing on the Updates page?
    If you do not see it at the Purchases tab, quit the AppStore again, then make sure, the Language&Region" in the   System preferences are set to English USA, restart your Mac and try again.  This worked for some forum members, to get the update to show at the AppStore.
    If all fails, contact Apple Support and ask for a redeem code, so you can download Aperture 3.6 for free:
    You will need to provide a proof op purchase of Aperture and insist to talk to the manager.
    Use this link: http://www.apple.com/support/mac/app-store/contact/
    Apple sent redeem codes for Aperture 3.6 to several users who had bought the version on disks, if they could provide a serial number, so they could download the update for free.  See for example this discussion: (The post marked as the solution)
    Re: Aperture update not possible after update to Yosemite
    It is really unfortunate you missed the window of opportunity with Mavericks MacOS X 10.9.5, when the update was easy.

  • Problems with conference calls(adding and merging calls) after upgrade to ios 8.1.2 on iphone 5s

    I am having weird problem intermittently with adding calls or merging them or swapping them. The issue happens 8 out of 10 times whenever I try to do a conference call. This issue came up after I upgraded to 8,1.2. Never experienced this in 8.1.1 or previous version.
    Some of the scenarios that I have experienced is:
    1. While on the call, when I try to add a new contact, it just doesn't dial the second number.
    2. Sometimes the second number gets dialed, cannot merge the calls.
    3. After talking to the second person, cannot go back to the first call.
    I am very sure that this is not a carrier issue as it worked flawlessly before upgrade.
    Anyone experienced this before? Any suggestions?

    Thanks for the above infromation. I did a complete restore of my iphone through iTunes connecting it to my computer via cable. iOS8.1.3 was re-installed. I then added back my settings and data which were backed up prior to restoring the phone. I still have the same issue with conferencing and adding a third caller. When I hit the [+] box, the existing caller is not put on hold. The phone appears to be making a call but it is not dialing to the 3rd party. Shortly thereafter, the Merge icon appears but there is no active call to merge with. I have tried this several times using my wife's iPhone and our home phone to set up a 3-way call. I know it is not working because the 3rd phone (our home phone) does not ring. Is this a hardware problem? My wife's iPhone 6 works with no problem and was purchased the same time I purchased my iPhone 6. Probably time for a visit to the Apple Store unless there is another solution.
    iPhone 6; iOS 8.1.3; Carrier: Verizon

  • After upgrading to iOS 8.1.1 my iPhone 5s is saying no service what do I do?

    HELPMe Please

    If you're in your carrier's coverage area
    Follow these steps, testing after each.
    Tap Settings > Enable Airplane Mode, wait five seconds, then turn off airplane mode.
    Restart your device.
    Remove the SIM card. If the SIM card is damaged, worn, or bent, or if it's too big or small for the SIM tray, contact your carrier for a new one. Then reinsert the SIM card.
    Check for a carrier-settings update: Connect to a Wi-Fi network, tap Settings > General > About, and install any available carrier-settings updates. If you can't connect to Wi-Fi, connect your device to a computer that has iTunes.
    Update your iPhone to the latest version of iOS.
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings. This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.
    Contact your carrier to check for any network or account issues.
    Restore your iPhone.
    If you see No Service while roaming or traveling
    You might be outside of your carrier's coverage area. If you're traveling internationally, you'll need an international roaming plan to use your iPhone or iPad.

Maybe you are looking for

  • Mountain Lion Mail cannot search for non-alpha characters in Subject Lines

    Under 10.8.3, Mail 6.3 often cannot successfully find messages if the search string contains a non-alpha character. I have only tested this searching for Subject lines that are KNOWN to contain non-alpha characters Specfic examples: Subject starts wi

  • Transition stuck in Photo Album theme between video clips

    I'm working with iMovie 11 and it's the second time this is happening to me. I made a movie using the Photo Album theme that combines video from my iphone and photos. I have a 27 minute movie and I'm pretty much done except that I haven't added music

  • Change Trading Partner

    Hi, How do you change the trading partner in a posted document?  We want to clear an account but there is a problem with the trading partner in one of the line items and we can not change the trading partner as it is greyed out.

  • How to use system call in assembler

    I write codes to display the dictionary using C, and it can run well,and then I want to use system call in assembler to realize the same function ,but it doesn't display the dictionary,how to correct it? Look: //C #include <stdio.h> int main() char *

  • How to handle thousands of clients without using Overlapped I/O?

    Is there's a way that allows me to handle thousands of clients without using Overlapped I/O? Based on what I know select() can only handle 64 sockets, and it is not a good idea to increase this limit (by overriding FD_SETSIZE).