Cannot access my photos at WD using iPhoto after Mavericks!
Cannot access my photos at WD using iPhoto after Mavericks!
Did it.
iPhoto opens nicely but without the photos:-(
However I can reach the them by: WD > iPhoto Library and then right click Show Package Content > Originals
All the photos are there and reachable manually.
I am guessing that there should be a software patch/update by either Apple or WD to bridge the photo portfolio at the external disk and the iPhoto.
Thanks your efforts.
Similar Messages
-
I copied a lot of photos from an iphone to a DVD using a Windows 7 laptop, now I cannot access those photos on the DVD. HELP! In Windows Exlporer I can see the data on the disk in the details but when I click on it nothing appears as if there is nothing on it.
It should. So they aren't shown in the Last Import smart album, right? Try the following:
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - Run Option #4, Rebuild Database, followed by Option #1 if needed.
OT -
I just installed Yosemite. iPhoto is gone, and Photos does not open. Instead, I am prompted to update to the latest version. The App Store tells me that is not available in the US. What do I do? Cannot access any photos.
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Download and install the OS X Yosemite 10.10.3 Combo Update.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
Cannot access my photos on computer. Time machine no longer shows IPhoto in Backups from 2 weeks ago
Cannot access my photos in IPhoto it will not open. Time machine has not backed up IPhoto for the last two weeks.
There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have. -
I have photoshop cc and a mac book pro. I cannot access my photos from photoshop. I can go to iPhoto and click edit to edit them in photoshop, but photoshop won't open them. I want to do a collage, so I need to get to more than one photo.
See if exporting them helps:
Exporting From iPhoto | Apple Support Communities
Gene -
IMovie Cannot Access your Photos or videos - To enable access..blah blah..doesnt work
The error I am receiving is ...
iMovie cannot access your photos or videos
To enable access open the Settings app, tap location services and set the imovie switch to ON
I have done this and continue to get the message.
What am I doing wrong?
I am using an IPad with OS 6.01OH AND it started happening when I went to IOS 6.01
IT was working fine before that time. -
I recently upgraded to Yosemite 10.10.2 and Aperture 2.1.4 will no longer open. I cannot access my photos and I don't want to pay for latest version of Aperture since this application is no longer going to be supported. How can I get my pictures?
If you want just the originals, then you can go into the Aperture library (right click on it and do "show package contents"). Inside is a directory called "Masters" and you can find the original files in a bunch of subfolders.
But... you'll lose all adjustments, keywords, and other information, and just have the files as they were imported originally from the cameras.
Easiest is probably to buy Aperture and update everything, and then migrate to the Photos application down the road if that's what you want. Aperture 3.0 came out in 2010 (five years ago!) so it's not like you've upgraded in a while -
since installing the latest update on my iphone 3gs this afternoon whatsapp now says it cannot access my photos. I have gone to settings-location services- but whatsapp is not listed in the list below. Please help!!!!
Contact Whatsapp for support.
There is no logical expectation for Whatsapp to be listed under location services or for that to have any affect on what the app can access. -
I have just upgraded to the new OS X V. 10.10.3 but cannot access my iCloud Drive documents using the resident Pages and Numbers software on my MacBook Pro. Help is needed to access those documents using the resident software on my MacBook Pro rather than the Beta software on iCloud.com.
I have iCloud Drive set on the Finder sidebar and use that to open the Numbers Spreadsheet on iCloud.
OSX 10.10.3
Best. -
I have an iPhone 4S running software 5.1 (9B179) and cannot sync the photos in PhotoStream with iPhoto '11 v 9.2.1 (628). There's no option to update iPhoto and no option of PhotoStream (which is enabled on my phone). Can anyone help?
Thanks, Peter.
The "link related" and "text related" crashes were what I interpretted here, too, though I'm at a loss on how to proceed given that this is a fresh system and applications. This is happening with multiple InDesign projects in a design office environment where many others work on the same files and none of the other computers are having problems with these files. I've removed the same files listed (thank you for those) before and did so effectively with creating the new user account to test with, but it had no effect. I just tried again though, as these files could easily have becone corrupt again if they were being written to when InDesign crashed. Will let you know if that makes any difference. I've also gone through and completely cleaned out the fonts again and once more cleared the font caches. If need be I'll reboot this system into safe mode and try that way.
Best,
Mike -
Just downloaded Mt Lion on to my imac and now cannot access my photos from adobe cs4
just downloaded mt lion onto my imac and now i cannot access my photos from adobe cs4
Hope you made a Backup?
I work with Cs 5 on mac os X.6.8
and will wait a lttle bit to install mountain Lion.
I´ve heard too much about technical Problems.
I loaded MT and make a disc image from it with right mouse klick and safe it on my seperate disk.
I will put MT on an emty disk to test it, but I can wait.
Never change a winning Team ;-)
I wish you fix that Problem next time, sorry I can´t help in this case. -
Unable to send photo through email using iphoto theme (designs)
Unable to send photo through email using iPhoto theme (designs) using the SHARE button.
Error message:
Your email did not go through because the server did not reply.
Check your Internet connection.
If the connection is working properly, the email server may be down.
Try sending your email again later.Your email did not go through because the server did not reply.
Check your Internet connection.
If the connection is working properly, the email server may be down.
Try sending your email again later.
Are you using Yosemite and not apple's Mail app? Then you may need to set up an app-specific password: See the post below:
Re: I am using iPhoto version 9.6 and I can no longer get an email sent with a photo attached. I get an error message saying the email did not go through because the server did not reply. I can send the photo with Mail. Help!in response to Gary Kissler
This solution is for those of you using 2-step verification for your Apple ID and are using iCloud as the mail server that you are trying to mail photos with.
I too had this issue. The problem in my case occurred because I had setup 2-step authentication for my Apple ID. If you have done this then you will get the error message "the mail server did not recognize your email/password...". To solve the problem go to:
https://appleid.apple.com
Click "Manage Your Apple ID"
Verify your identity with the device you selected (if this step does not show up then you have not likely set up 2-step authentication and this is not your solution)
Click Password and Security in the left column
Click Generate an app-specific password
Enter iPhoto as the name of the app
Copy the password and paste this into the password box in iPhoto where you would normally enter your apple ID (in the mail account section in iPhoto preferences).
And...voila' (I hope) -
I have inadvertently changed a file permission setting. When opening Aperture I get the following; "Aperture cannot access this library. To use this library make sure it's file permissions are set correctly". I am an old dude new to Mac OS. Looked in settings but have no idea how to allow file sharing to myself. I have been using Aperture actively for 6 weeks. I'm the only one using this Mac. What up?
Back up all data now.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. You can demote it back to standard status when this step has been completed.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Drag or copy — do not type — the following line into the Terminal window, then press return:
sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:20 ~ $_ ; chmod -R -N ~ $_ 2> /dev/null
Be sure to select the whole line by triple-clicking anywhere in it. You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning. If you don’t have a login password, you’ll need to set one before you can run the command.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select Utilities ▹ Terminal from the menu bar. A text window opens.
In the Terminal window, type this:
resetpassword
That's one word with no spaces. Then press return. A Reset Password window opens. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select ▹ Restart from the menu bar. -
I have reset my Apple ID & Password but I still cannot access the music I purchased using another computer, ID & PW. It keeps saying that my computer is not authorize to play the songs. I have tried everything and nothing seems to work. Help!
iPod touches or any iDevices from Apple sync only to one computer. If you sync to a different computer, all your music will be replace with the music from the new computer's iTunes. If the music were purchased from iTunes, you can re-download them again otherwise the music on iPod touch will be deleted. Do you have iTunes backup?
-
How do i access my photos in iCloud using Windows Vista?
How do i access my photos in iCloud using Windows Vista?
You can access your photos from photo stream on any of your devices.
If you delete photos from the camera roll they aren't deleted from photo stream, if that's what you are asking.
My webpage here might help you understand the various ways photos can be saved on your device and some of the advantages and disadvantages associated with each method.
Maybe you are looking for
-
Purpose of Payment - in payment file
Hi All Is there any field available to capture purpose of payment in the payment file. I have seen one field SCB indicator.. regards Gopal
-
How do I get a network connection with an Arch rescue CD? [solved]
trying to get my system back up as this has also happened to me after a -Syu https://bbs.archlinux.org/viewtopic.php?id=93107 In my case I get mounting ' ' failed No such device Failed to mount the real root device. Bailing out, piss off. or similar,
-
PO Form Personalization affecting for False condition.
Hello All, I have done with PO(Enter PO) form personalization to disable the Cancel functionality from tools Menu for 'Goods' Line Type. The condition am using for personalization is (:PO_LINES.LINE_TYPE= 'Goods') AND (:PO_HEADERS.DOC_TYPE_NAME =
-
Hi All, I have tryed to created the widget to print for entire captivate slides within a single shot. But i have failed to do that. So i have planned to make the entire slide as a separate screenshot then put it in the click event. While i have compi
-
Using a tablet with windows 7 and multitouch screen and the actual firefox version. If i open google maps and want to zoom the map with the zoom gesture, firefox zooms the hole browser window including the tools instead of the map. If i open another