Cannot access USB storage

I had a E3200 for more than a year and everything is fine. I have a 128G USB key attached to the usb port and had no problem sharing the content with any user connected to the router. In the last 2 days I started having problem accessing the USB key. When my WIN8.1 came up, I saw notification saying "not able to cnnect to all network drives" and I cannot get to the USB key anymore. The other router function is fine (every user can access internet with no problem). I tried to check using the admin interface. But 192.168.1.1 did not return the admin login (using IE or Chrome).
I powered off and power on the router, I can than get to admin and saw no problem with the USB Stoarage and I also was able to get the USB content on my file explorer. This stayed OK when I was using my laptop (may be for 1 or 2 hrs). But the next time I power on my laptop, I got the problem again (cannot get to the USB drive and 192.168.1,1 did not return login prompt). Power off and power on the E3200 will do the trick again. Any suggestion on how I can find out what is wrong ?
Solved!
Go to Solution.

To help us isolate the situation, try accessing your files using other laptops. If all of the devices are affected, it would be best if you'll check if the firmware is up to date. If it is, you may try to re-flash the firmware.
To download the update instructions and the latest firmware, go to this link, http://support.linksys.com/en-apac/support/routers/E3200.
It is recommended to do a factory reset after successfully updating the firmware. Reconfigure the router and observe its performance.

Similar Messages

Cannot Access USB Storage on WRT610N From My Computer

Hi ,
I am uable to access my files on the USB Storage Device connected to WRT610. Its configured properly. I can see the drive on my network. When I double click it asks for password which I enter and it takes me to the shared folder. But when I click it it says Not Accessible....You donot have the persmission. FTP works fine.
I have noticed that on the disk page in the Shared Folder Area when you click on the Summary, the box with Groups With Access is Empty. Whereas on the FTP area in the same summary it clearly mentions the admin group.
I have tried every thing including factory reset, hard reset, using new group, new user name etc...but no joy.
The technician from Linsys even spent an hour on my computer and ultimately he gave up and gave me number to contact technical support.
Any Ideas Guys. Its driving me mad!!!
Regards
Nilesh

Let me know the current firmware version in the Router? If the firmware in the Router is an older version then upgrade it with the latest one which can be downloaded from the Linksys/Cisco website. After successful firmware upgrade you need to reset the Router. It is recommended to reset the router once. Steps to reset the router:
Push the reset button on router for 30 seconds, turn off the router wait for 30 seconds and then power it on. Power light should blink when you perform the reset process.
After reset, reconfigure the router and then check the connectivity status of the storage..
NOTE: Before upgrading the firmware must disconnect the USB DRIVE. As the drive connect may corrupt data on the drive, so as a precaution make sure the user safely disconnects the drive by using the button in the Storage page that says Safely Remove Disk

Cannot access usb ethernet after upgrade

I upgraded from 10.5.5 to 10.5.8 via download and now cannot access USB Ethernet. Select "Network" in System Preferences & all I get is "beach ball." When I disconnect USB Ethernet, Network appears. I had to use Apple USB Ethernet adaptor because Ethernet board got fried and did not want to buy new Mac. Can I go back to 10.5.0 then to 10.5.5 combo? If so, how?

Solved my own problem. Reinstalled 10.5 then the 10.5.5 Combo updater and now USB Ethernet works. I guess I will stay away from any further updates after this. So, my ancient eMac lives for another day.

Air cannot access USB Drive on OS X

I am having a problem seeing a connected USB thumb drive in
the fileSystemTree under OS X. I can see the drive when i run the
app under Linux or Windows, however i just cannot find the
connected drive in OS X. anybody have any suggestions, or
workarounds?

ok so i found a work around for this issue. apparently in OS
X you can't see all the drives mounted when using air by default.
to get around this i just created a new file and resolved the path
to "file:///Volumes/" this takes you to the "volumes" folder to
which you can access all mounted drives on your system. if you are
using a filesystemtree, as i was, you can then set the "directory"
property to this newly created file. now you will see all your
mounted drives (usb storage drives included) in your
filesystemtree!

Cannot access key storage in Visual Administrator

Hi,
I cannot access the key storage node (==> Host ==> Server ==> Services ==> Key Storage) in Visual Administrator.
Everytime I click on the key storage node an error message pops up. It says:
<b>IAIK security library not found
java.lang.NoClassDefFoundError:iaik/security/provider/IAIK</b>
According to SAP (http://help.sap.com/saphelp_nw04/helpdata/en/e9/a1dd44d2c83c43afb5ec8a4292f3e0/content.htm) the SAP Cryptographic Toolkit has to be installed to use the Key Storage functionality of the Visual Administrator. The SAP Cryptographic toolkit has been deployed.
Does anyone know where I can get that library and where I am supposed to put it? We work with <b>SAP NetWeaver '04 WebAS Java 6.40 SP14</b>.
I appreciate any kind of help.
Regards,
Martin

Hi,
The missing class should be in the iaik_jce.jar
archive. This archive is present in folder \usr\sap\<SID>
\sys\global\security\lib\tools(or)engine.
Copying this archive to the visual admin's <j2ee-install>
\admin\lib folder, this workaround can solve your issue.
You may also need unlimited strength jurisdiction
policy depending on your JDK version. For more info:
http://help.sap.com/saphelp_nw04/helpdata/en/e9/a1dd44d2c83c43afb5ec8a4292f3e0/content.htm ->
Deploying SAP Java Cryptographic Toolkit.
Also check SAP Note: 891666
Hope it helps..
Regards
Srikishan

Cannot access USB flash drive. - Access Denied

Have HP flash drive that I cannot access any files. The computer reads the USB drive ltter but then gives me the message access denied. Tried on other computer and works fine. Even works on this computer in safe mode, but not in regular mode.

Hello @thecos99,
I understand that your desktop computer is not able to read the information on the USB flash drive, and that it indicates that the "Access is Denied". I would be happy to assist you in this matter!
To further diagnose this issue, I recommend following the steps in this document on Troubleshooting USB Connections (Windows 7). This should help enable your system to recognize the USB drive.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Cannot Access USB Hard Disk

I have a USB hub connected to my airport with a printer and USB hard disk attached. I can see in manual setup in AirPort utility that both the printer and the hard disk are set up and connected. The printer prints wirelessly.
My problem is that I cannot find the hard disk on my computer in order to take and put in files. Where is the hard disk located???

In the Airport Utility /Disks/File Sharing make sure 'Enable file sharing' is checked. Select your choice for access (Secure Shared Disks).
Airport Disk Utility: I have enabled 'Automatically discover AirPort Disks' as well as 'Show Airport Disks in the menu bar'. My action for the Airport is 'Connect with Password'.
More often than not every disk I add to the hub (which is attached to the base station), shows up immediately. When it doesn't, I simply use the menu bar icon, click on the airport name and click 'OK' once the disk availability box appears. My oresent setup is to remember the password in my keychain.
Note: since updating the firmware as well as Airport application, I have had no issues with hard drive access or, in particular, printer access.

How can I see file with chinese name in Sunray USB storage?

hi, All
I installed Sunray4u3 on Solaris0805. the application server is win2003EE.
I accessed usb storage from win2003, but I can only see files with English name , and could not see files with chinese name. Why? who can help?
best regards
xiong wei

You might want to make sure your credit card is listed in the billing information associated with your Apple ID (see http://support.apple.com/kb/ht1918).
Also, to change the From name that appears when you address emails on and iOS device, go to Settings>Mail,Contacts,Calendars...tap your iCloud email account, tap you iCloud account at the top, tap Mail at the bottom, then enter the name you want to use in the Name field at the top.
To change the From name on your Mac Mail, go to icloud.com, sign into your account, open Mail, click the gear shaped icon on the bottom left and choose Preferences, go to the Accounts tab and enter the name you want to use in the Full Name field and click Done. Then quit Mail on your Mac and re-open it. Your new From name should now appear in the drop-down list when you compose a new email.

Remotely access usb western digital 2tb storage connected to airport

Hi everyone, just wanted get some feedback on this set up, if it is possible, and how to configure the settings properly. I want my Netgear n600 router Version 1 + Airport Express + WD 2tb hard drive to = a personal cloud that I can remotely access. I have a netgear n600 WNDR3400 that has a 2.4ghz and a 5.0ghz wifi network capability. I 30-30-30 flashed the netgear n600 router so that I have dd-wrt firmware( DD-WRT v24-sp2 (12/08/11) mega) running on the router instead of the restrictive built-in netgear web interface. I have an Airport Express 802.11g version 6.3 that I have connected to the netgear n600 router via ethernet cable. Connected to the airport express, via usb 2.0, is a Western Digital 2tb hard drive (externally powered). When I am booted up from the internal macbook pro hard drive mac side (I also have Bootcamp Windows 7 installed that I can boot from) my mac's time machine application starts backing up to the WD hard drive when I connect the usb hard drive to my macbook pro. The entire WD hard drive is formatted as HFS+, however I am considering partitioning the WD at least 3 ways, 1250 gigs HFS+ for mac storage, 500 gigs NFTS for windows storage, 250 gigs for unux / linux storage to host my website. I want to remotely access the WD storage space connected to the Airport Express, specifically, each individual hard drive partition based upon what remote system I am using and the respective partition storage format. If I am on a windows computer, I want to have a 500 gig "cloud" that I can access any computer via a windows Start -> Run or map the network drive. I want the same home server ability as a 1250 gig cloud that any mac can access. I want to have remote read or write priviledges when I connect to this server through the mac finder. Similarly, I want to connect through a linux terminal to have access to my 250gig partition for unix. One last thing, I want to host my website on the WD plugged into my Airport Express. Does anyone have any suggestions what dd-wrt settings I need to change to make this work? I do not understand port forwarding very well at all. I think I understand that I need to have a static ip address and then forward the ports. I just do not know what to set my static ip to, or what settings I need to change in the dd-wrt web interface for forwarding ports. Can anyone please tell me which ports do I forward to remotely access my usb storage and personal website? Any help would be greatly appreciated!
Much obliged, Keento

The Express doesn't support HDDs.

My iPad has been disabled due to not having enough storage for backup in iCloud. I attempted to download photos to my computer, however, I get the message that no photos were found. In the meantime, I cannot access my pad.

iPad4 - unable to backup due to lack of iCloud storage . The pad is frozen. Cannot access any info.

However, if the iPad is frozen, a reset may allow you to get back into it again. It hurts nothing to try this. It is like rebooting your computer.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

I upgraded new software onto my iphone 4 however it stopped syncing and said error so when i tried to access my phone the itunes USB was showing in my phone screen and now i cannot access my phone

i upgraded new software onto my iphone 4 however it stopped syncing and said error so when i tried to access my phone the itunes USB was showing in my phone screen and now i cannot access my phone

When it stopped and said error, what was the error? You are saying that you disconnected the phone from the computer and all you see is the USB showing on the phone? Then you need to reconnect to the computer and restore the phone.

"Site System Status Summarizer still cannot access storage object" after DB Move

After our SCCM server was up and running, the DBAs moved the SQL Site Database to a new drive which is a supported SQL Operation according to this Support document:
https://support.microsoft.com/en-us/kb/2709082
Using the methods described by the above document we were able to restore functionality to SCCM but I am still seeing Informational messages in the SMS_SITE_SYSTEM_STATUS_SUMMARIZER component.
Site System Status Summarizer still cannot access storage object "\\<SQLServer>\S$\SMS_<SQLServer>" on site system "\\<SQLServer>". The operating system reported error 67: The network name cannot be found.
Possible cause: The site system is turned off, not connected to the network, or not functioning properly.
Solution: Verify that the site system is turned on, connected to the network, and functioning properly.
Possible cause: Site System Status Summarizer does not have sufficient access rights to connect to the site system and access the storage object.
Solution: Verify that the accounts are properly configured to allow the site to connect to the site system and access the storage object.
Possible cause: Network problems are preventing Site System Status Summarizer from connecting to the site system.
Solution: Investigate and correct any problems on your network.
Possible cause: You took the site system out of service and do not intend on using it as a site system any more.
Solution: Remove the site system from the list of site systems used by this site; this list appears under Site Systems in the Configuration Manager Console.
Possible cause: You accidentally deleted the storage object or took the storage object out of service.
Solution: The components will eventually detect that the storage object no longer exists on the site system and will either recreate it or choose a new storage object. Monitor the status messages reported by other site components to verify that this
occurs properly.
The storage object has been inaccessible since "14/03/2015 1:23:20 AM". When you correct the problem and Site System Status Summarizer successfully accesses the storage object, Site System Status Summarizer will set the storage object's status
to OK, providing that the storage object has sufficient free space.
I have run a site reset to try and fix this but the site server still seems to be trying to access files on the old drive. Is there a method to get SCCM to start looking for these files on the NEW DB drive (H$) in my case?

Was a site reset performed at all yet? This has to be done.
Torsten Meringer | http://www.mssccmfaq.de
Yes, I tried a site reset prior to making this post. I was sure I had read that this should resolve the issue but unfortunately it seems a site reset did not resolve the issue.
Since we are running a virtualized environment, is it possible the old drive has to still exist prior to running the site reset? If we add a small "S" drive back to the server and run the site reset again, might that help?

I have a router that has a readyshare USB storage access port that has mp4's of movies. So how can I view them from my iPad 2 ?

I have a router that has a readyshare USB storage access port that has mp4's of movies. So how can I view them from my iPad 2 ?

I just bought a NETGEAR WNDR3400v2".
I own a mac, running 10.7 and an ipad 1.
I can access my USB stick, on the netgear wireless router, from my mac or ipad.
From a mac or ipad .... http://readyshare.routerlogin.net/shares/USB_Storage/ or just http://readyshare.routerlogin.net/shares
Also, on a mac only, try, go > connect to server> smb://readyshare
Works for me!

WRT350N FTP access to USB storage

I have my WRT350N setup. all computers within my LAN can access my usb storage device. I can not access my usb storage device using a computer outside my LAN.
if you log on to 99.225.89.229:8080 it will ask you for user id and pass word to log into my router.
if you try to log on to 99.225.89.229:21 it wont even connect asking you for a user id and password.
my guess is the router is not allowing port 21 to be accessed, but I'm not sure. Any one know how to fix this problem?

Upgrade the router with a latest firmware first..
Once its upgraded reset the router for 30 sec and then reconfigure the router again..
Open the FTP port 21 on the port range triggering option.
Basically port range triggering is for the incomming ports and when you try to access the USB from outside LAN then this port 21 will help you with it..

My MacBook w/ OSX 10.6.8 cannot access my external Time Machine Backup USB Drive. It says it is a Read Only drive. When I went to change permissions I found all pernissions were listed as "Custom" and I could not reset them to "Read Write". Any help!

My MacBook w/ OSX 10.6.8 cannot access my external Time Machine Backup USB Drive. It says it is a Read Only drive. When I went to change permissions I found all pernissions were listed as "Custom" and I could not reset them to "Read Write". Any help would be appreciated.

This can be done easily with ethernet.
Please follow the instructions strictly.
To make it easier I want you to do this overnight so you can turn off all your current connection to the internet.
Just go to the airport fan in to the top right and turn airport off.
Get ethernet cable and connect the laptop to the TC lan port.. ie <-> ones.
Press and hold the reset on the TC for about 10sec. until the front led flashes rapidly.
Open the airport utility.. go to manual setup and change the wireless to off. (so other people around you cannot join your network of one).
Ignore all the errors.. they won't stop the backup working.
Go to the TM and reselect the backup target disk as the TC.
It should start after 2min and run through to completion.
That is it.. for a backup of many GB it might take a few hours.. so make sure the laptop has power plugged in and the sleep is off.. (on early ones I think this is needed but I am a late arrival to the scene).. sleep doesn't affect later OS.

Cannot access USB storage

Similar Messages

Maybe you are looking for