Cannot access web server internally with ea6200
I have the same problem as found in these posts:
http://community.linksys.com/t5/Wireless-Routers/Cannot-access-server-internally/m-p/743969/highligh...
http://community.linksys.com/t5/Wired-Routers/Accessing-Internal-Web-Servers-External-OK-Internal-No...
http://community.linksys.com/t5/Wireless-Routers/EA6500-NAT-Redirection-Bug/td-p/583820/highlight/fa...
Basically, I can't access my local http http server. Like the other posters, this is a new router and I've never had this problem before. I know very little about networking, but I am a developer and need my server to be accessible on my LAN.
The only things I’ve done since setting up the router are:
Setup the wifi security
Enable the media prioritization as a user suggested in the last link I posted.
Forward ports 80 and 8080 – I did this knowing that it made no sense because I only care about local access, but since nothing else with this stupid router makes any sense, I figured, “what the hell!”
I really appreciate any help I can get. I’m thinking about just ordering a new router and sending this PoS back to newegg.
Hi jerred121, I've done a bit of a research about this feature. There is what we call DNS Rebinding Attacks, certain actions will not work from behind the router, this is for your own protection. I know it worked before with older routers.
If you need to access your server locally, you can use the private IP of that device rather than the public IP.
Similar Messages
-
How do i solve - cannot access web server - error message when creating a project in 4.5 with PHP
Screenshot of how it looks when i try to show a ms access form inside a iframe:
http://oi58.tinypic.com/2vj4ish.jpg -
NAC GUEST SERVER CANNOT ACCESS WEB CONSOLE
Hello,
I have a NAC guest server. I can access CLI but cannot access web console. I used both the https:// ip address/admin and http://ip address/admin. Please what could be the solution of this issue?
thank you and best regards.
EdwinEdwin,
Are the various necessary services running on that server? Post the output of following commands:
ps auwwwx
chkconfig --list
service httpd status
service postgresql status
Faisal -
SPA122 cannot access web configuration utility
The new SPA122 device connected to router through DHCP.
I can see IP-address on router's web page, can ping it, and receive it with ****110# IVR command.
But I cannot access web configuration utility in the browser: the page is unavailible. I tried to allow WAN access with ****7932#1#1 IVR action - the problrem still on.
Can You give me any advice what to do.You can also connect to the lan/ethernet side of the device, do an ipconfig /renew
You should get an address on the 192.168.15 network, the default for the router in the ATA is 192.168.15.1
Then you can set up the non default password, enable the wan web server (administration tab I think).
dlm... -
I'm trying to connect to my work's VPN. I am connected to the VPN, but I cannot access the server. I keep getting a message that says the server may not exist or is unavailable. I know that’s not the case because my coworkers are connected. Can someone please help me?
I have the same problem. It is only with tv shows and only with programs I have downloaded after the software update.
Apple support sent me the above link too....but it doesn't solve the problem...my computer is authorized and the content is in my library and will play on my Mac air, but it will not sync the tv shows, it keeps saying my computer isn't authorized for it.
No answers here, but you are definitely not alone with this issue. -
BIB-7000 Cannot access X Server : For only Graphical Dashboard
Version : 11.5.10.2
There is abnormal behavior only for graphical dashboard. However, PDF reports are running fine completion with no error.
pls advice what is the caused of this issue.oracle0282 wrote:
Version : 11.5.10.2
There is abnormal behavior only for graphical dashboard. However, PDF reports are running fine completion with no error.
pls advice what is the caused of this issue.What is the navigation path?
Please also see these docs.
11.5.9/11.5.10: Account Manager Dashboard Error: "You Have Encountered An Unexpected Error" with Exception Error: "Java.Lang.RuntimeException: BIB-7000 Cannot Access X Server" [ID 390519.1]
'BIB-7000 Cannot access X Server' Error Clicking on Details Button in Compensation Workbench Approvals Task [ID 558420.1]
Opening Reporting Page (Tab) Results In Java Exception Error: BIB-7000 Cannot Access X Server [ID 337899.1]
BIB-7000 Server Error On Navigating To Oracle Marketing Audience Workbench [ID 433209.1]
How to Test X-Server in JSP Module [ID 461497.1]
Clicking Configure icon in DBI gives You have encountered an unexpected error. Please contact the System Administrator for assistance [ID 303422.1]
Troubleshooting FNDREPRINT Framework in 11.5.10 [ID 330351.1]
ATTEMPING TO VIEW GRAPHICS OR TRYING TO CONFIGURE THE JAVA MAILER HANGS [ID 351839.1]
Thanks,
Hussein -
My application needs to a access web server. So, from that application how do i call Firefox ? And how do i pass an argument such as the url/web server ip address?
== This happened ==
Not sure how oftenTry posting at the Web Development / Standards Evangelism forum at MozillaZine. The helpers over there are more knowledgeable about web page development issues with Firefox.
[http://forums.mozillazine.org/viewforum.php?f=25]
You'll need to register and login to be able to post in that forum. -
Am running Lion on MacBook. Suddenly cannot access web with Safari or Firefox. Email OK and Network diagnostics says my internet connection appears to be working correctly". No problems with my iMac on same network.
What exactly happens when you try to load a web page?
-
SRKIM: Bis dashboard 에서 BIB-7000 Cannot Access X Server Error
PURPOSE
Bis dashboard page 에서 발생하는 BIB-7000 Cannot Access X Server error 를 해결한다.
Problem Description
Graph를 보여 주는 BIS dashboard page 에 접근 시 아래와 같은 error 가 발생한다.
Error
You have encountered an unexpected error. Please contact the System Administrator for assistance.
Click here for exception details.
On clicking the link, exception stack would be displayed where
“java.lang.RuntimeException: BIB-7000 Cannot access X Server" is displayed
Workaround
N/A
Solution Description
1. Applications 와 Database tier 의 context file 에서 "s_display" 변수가 제대로 설정 되었는지 확인 한다.
Nav : Application (OAM) > AutoConfig > Edit Parameters
"s_display" 변수는 반드시 아래와 같은 형식으로 설정 되어 있어야 하며 해당 Display Server 가 반드시 running 상태 여야 한다.
"DISPLAY <hostname or ip address>:0.0"
2. 'root' user 로 Display Server에 접속 하여 DISPLAY 환경 변수를 아래와 같이 설정한다.
For csh:
% setenv DISPLAY <hostname or ip address>:0.0
example: setenv DISPLAY 192.168.1.128:0.0
For sh, ksh and bash:
$ DISPLAY=<hostname or ip address>:0.0; export DISPLAY
example: DISPLAY=192.168.1.128:0.0; export DISPLAY
3. adstpall.sh script 을 이용하여 application services 를 다시 시작한다.
Reference Documents
Note. 390519.1 Java.Lang.Runtimeexception: BIB-7000 Cannot Access X Serveroracle0282 wrote:
Version : 11.5.10.2
There is abnormal behavior only for graphical dashboard. However, PDF reports are running fine completion with no error.
pls advice what is the caused of this issue.What is the navigation path?
Please also see these docs.
11.5.9/11.5.10: Account Manager Dashboard Error: "You Have Encountered An Unexpected Error" with Exception Error: "Java.Lang.RuntimeException: BIB-7000 Cannot Access X Server" [ID 390519.1]
'BIB-7000 Cannot access X Server' Error Clicking on Details Button in Compensation Workbench Approvals Task [ID 558420.1]
Opening Reporting Page (Tab) Results In Java Exception Error: BIB-7000 Cannot Access X Server [ID 337899.1]
BIB-7000 Server Error On Navigating To Oracle Marketing Audience Workbench [ID 433209.1]
How to Test X-Server in JSP Module [ID 461497.1]
Clicking Configure icon in DBI gives You have encountered an unexpected error. Please contact the System Administrator for assistance [ID 303422.1]
Troubleshooting FNDREPRINT Framework in 11.5.10 [ID 330351.1]
ATTEMPING TO VIEW GRAPHICS OR TRYING TO CONFIGURE THE JAVA MAILER HANGS [ID 351839.1]
Thanks,
Hussein -
when Update to 10.7.2 ,I cannot access to any site with ssl connection and fail to open safari and keychain, unless restart computer and login in with Guest account.
OS:10.7.2
Macbook Pro 2010-mid 13inchI also have the same problem, however if I use Firefox or Opera sites with ssl connection work fine. Still, I can't use Google Chrome (ssl), Safari (ssl), the Mac app store (generally), or the iTunes store (generally). Both the iTunes store, Safari and the app store won't respond, and Chrome displays this error: (net::ERR_TIMED_OUT). The problem persists regardless of what network I'm using. Also, when trying to access the keychain or iCloud, the process will not start (will hang). I didn't have these problems at all before updating to 10.7.2.
Sometimes rebooting helps, and sometimes not. If the problem disappears by rebooting, then it only lasts a few minutes before it reappears. It is very frustrating, especially since there doesn't seem to be any obvious or consistent way of which to fix it.
I'm also using a Macbook Pro 13-inch mid 2010. -
I updated iphone 4s to 7.02 and now cannot access icloud server.
I updated iphone 4s to 7.02 and now cannot access icloud server.
One of these:
Restart:
1. Press and hold the Sleep/Wake button until the red "slide to power off" slider appears, and then slide the slider.
2. Press and hold the Sleep/Wake button until the Apple logo appears.
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data
Restore from backup
Restore as new
http://support.apple.com/kb/HT1414 -
I cannot access my Hotmail account with Safari on my MacBookAir but I can access it on my Mac/Safari and also from my PCs. Has anyone experienced the same? Does anyone know a fix for this?
To find out if it's system wide or user specific, try this...
Open System Preferences>Users & Groups, unlock the lock, click on the little plus icon, make a new admin account, log out & into the new account.
Does it work in the new account? -
Suddenly on my iPad I cannot access web links via emails but can on my iphone
Suddenly I Cannot access web links via emails on my iPad but can on my iPhone. Is there something in my settings I need to change?
Restart
https://www.apple.com/support/iphone/assistant/phone/#section_1 -
I purchased a movie via Apple TV/iTunes but it says that I cannot access the server at this time. In summary, I can't download the movie. This problem has persisted for 4-5 days now. Any suggestions? BTW, I upgraded to Yosemite on my iMac last weekend. Thanks!
You need more RAM.
http://www.thexlab.com/faqs/lackofram.html
Mostly iTunes, mail, finder, google chrome, and one or two other programs.
What are the "two other programs?" The ones you named shouldn't be consuming all your RAM, even if open concurrently. But I've heard (I don't use it) 10.7 is a memory hog.
Closing open apps may not solve the problem, since that memory is still being held in reserve for them.
This problem is usually caused by a combination of low RAM and low disk space.I am very puzzled when you say you have 895GB left on the drive. That should be an enormous amount of room for the memory to page out (write) to.
Message was edited by: WZZZ -
Problem with NAT? can get to web server internally but not externally
We are trying to setup our helpdesk software website so external users
can access it. However, we have been unsuccessful. We don't have any
issues accessing it internally from our 10.1.1.X LAN
We have had our ISP setup a public DNS "A" record of
customerservice.amerinet-gpo.com which resolves to 198.88.234.40 and that
appears to be working.
Next we added a NAT to our Firewall to take 198.88.234.40 traffic and put
it to the local IP of 10.1.1.23 which is our local address for the
webserver running the helpdesk software.
We also made sure that BM filters are allowing traffic on ports 80 and
443 to the local IP as well.
We have 4 other webservers (on a separate servers than our helpdesk
software website) that are exposed to the outside in this same manner and
all work fine.
The helpdesk website is on Windows 2003 server SP1 running IIS 6.0. Our
firewall server is NetWare 6 SP5 and BM 3.7 SP3.
I have tried to just telnet to the public IP of 198.88.234.40 on port 80
and it times out. I can't understand why, and have checked my entries on
BM and even deleted and re did them 3 times to make sure I didn't make a
mistake. I even have another web server on that block NAT'd the same way
and it works (198.88.234.36), if you telnet to it on port 80 it goes
right away.
What else can I try? Any insight would be greatly appreciated!
Thanks,
SCOTT> > ok, the easiest way to calculate valid addresses is to use an IP
subnet
> > calculator. The one I like the most is the free utility by Wildpackets
> >
http://www.wildpackets.com/products/...tcalc/overview
> >
> > Anyway, with a 255.255.255.248 network mask the valid IP addresses
> > associated to the primary address of your BM server are in the range:
> > 198.88.234.33-198.88.234.38
> > therefore .40 isn't included. Actually .40 is the subnet identifier
of
> a
> > separate subnet. The addresses from .33 to .38 are the ones you can
use.
> >
> > --
> > Cat
> > NSC Volunteer Sysop
>
> I was mistaken, the subnet for that block is 255.255.255.240 so I was
> told by our ISP that our range was is 198.88.234.32 to 198.88.234.47
or
> 14 usable IPs since first and last are unusable.
>
> We have 3 different IP blocks from our ISP, the above 198.88.234.32 one
> with the 255.255.255.240 subnet, then a 199.217.136.184 with
> 255.255.255.248 subnet and finally a 198.88.233.1 with a
255.255.255.248
> subnet.
>
> So I think we should be able to use the 198.88.234.40 address.
>
> SCOTT
>
I was really hoping that we had the wrong sub net in BM for the
198.88.234.32 block! When I read your post last night, I thought that's
gotta be it...sadly I checked and it does have it as 255.255.255.240 when
I look in inetcfg under bindings. I even checked our Cisco router as
well to make sure it had the sub net correct since this is the first time
I've tried to use an IP above 198.88.234.36. The router looked fine as
well. Is there anyplace else that this could be wrong, maybe a config
file on BM or something?
Thx,
SCOTT V.
Maybe you are looking for
-
Classification is not working after SR2 up grade to SR3
Hello, After we installed the new MAM 3.0 SR3, we cannot see the classification at the technical objects. In SR3 the classification has its own sync bo MAM30_018. We are on 4.70 R3 at SP26. Anyone has experienced this or have any idea how to fix this
-
Manage more than one news module in the same website
Hi, I am wondering if it is possible to manage more than one News module in the same website and have them all display different content. Like a news module in the News section displaying announcements and a press section module displaying press rela
-
What is the shift fields filter for?...
Hi everyone, I exported a movie from after effects in "animation" and imported it to FCP. it automatically added a 'shift fields' filter set to +1. this filter makes the focus soft and i am wondering why it is there and if i need it at all (i don't e
-
Dreamweaver CS6 beendet sich beim Starten
Hallo zusammen, ich habe derzeit ein Problem mit meinem Adobe Dreamweaver CS6. Beim Starten des Programms erscheint wie gewohnt das "Lade-Fenster". Wenn Dreamweaver dann fertig geladen hat beendet sich die Anwendung jedoch und das ganz Automatisch oh
-
About game programming.. please....help
How to define game map for java midlet If I see the rpg game, it have default map. I want to know how to translate it to code in midlet? The map will be existed image or dynamicly generated? Like Prince of Persia Midlet version, I wond