Cannot backup my files / copy my files and folders due to error message " The operation can't be completed because an item with the name ".DS_Store" already exists. "

Hi Apple community!
I have a [rather worrying] problem.
When I try to copy all my files from my documents on my mac [or the entire documents folder] into an external drive, I get this error message
" The operation can’t be completed because an item with the name “.DS_Store” already exists. "
I am not given an option to skip this file or anything else.
But I simply cannot complete the operation!
I have tried deleting a few of the .ds_store files, [both in the original and in the destinations]
but no success.
The same thing keeps happening.
At first, this was just happening when I was trying to backup to my dropbox folder [the one on my mac's harddrive, which gets synced to the cloud],
but then I tried to back up my documents to my external hard drive, and I realized it is giving me the same error message.
So effectively, it seems I cannot backup my files anywhere!
Any help or advice would be greatly appreciated.
Thank you.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Similar Messages

Problem with copying to external drives 10.8.3 "the operation can't be completed because an item with the name .ds_store exists"

After upgrading from 10.7.5 to 10.8.3 I cannot copy certain folders to any external drive. the operation can't be completed because an item with the name .ds_store exists. I have seen this problem in discussions for many years with no real solution. Does anyone have a resolution? Please help. This is very frustrating as I work in two locations and copy folders back in forth all the time.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

The operation can't be completed because some items had to be skipped. For each item, choose File Get Info, make sure "Locked" is deselected, and then check t

The following error comes up when I try to install the updated Firefox:
"The operation can’t be completed because some items had to be skipped. For each item, choose File > Get Info, make sure “Locked” is deselected, and then check the Sharing & Permissions section. When you are sure the items are unlocked and not designated as Read Only or No Access, try again."
When I follow the instructions in the error message, it shows that my user name has read and write access. There are a couple other items that are read only. I tried to change this to read and write, but the Sharing and Permissions options are greyed out and will not let me change them. What is the work around for this? I would really like to install the new firefox.
Thanks.

Hello,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default('''This will NOT delete profile info such as bookmarks and history'''):
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
Thank you.

Can't copy Aperature Library to external. Get this error "The operation can't be completed because an item is being modified."

I have been trying to find a solution to this problem by browsing this forum but I can't seem to find a solution.
As many others have decided to do I want to copy my Aperature library to an external FW 800 drive as my laptop space is dwindling. It seems all you need to do is copy the Library from the finder which can also be revealed in the preference if Aperature. When copying it seems to transfer for a few seconds but then I get this error "The operation can’t be completed because an item is being modified." I have formatted the drive correctly and there is no issues with Aperature itself so why do you think I am having this error? What can I do to copy this Library to my external?

Reboot your machine make sure Aperture doesn't start (as Lion is liable to do) and try it.

The operation can't be completed because an unexped error occurred (error code-50). This appears when I'm copying a file to the drive and then I wasn't able to edit to my drive. Then this morning I can't open my project file. What to do?

Message: The operation can't be completed because an unexped error occurred (error code-50).
This appears when I'm copying a file to the drive and then I wasn't able to edit to my drive.
Then this morning I can't open my project file. I get this message: The project appears to be damaged, it cannot be opened.
What should I do!??
I have moved my project onto 2 different external hard-drives now.

Hi There,
After looking around for this error, it seems to be related to OS, we would recommend you to contact Apple support for this.
Thanks,
Atul Saini

I renamed a power point a file and now when I try to open it it keeps giving me the error code -108. If I try to open or copy it say: The operation can't be completed because one or more required items can't be found. (Error code -43). What do I do?

I renamed a power point a file and now when I try to open it it keeps giving me the error code -108. If I try to open or copy it say: The operation can’t be completed because one or more required items can’t be found. (Error code -43). What do I do?

Post in Microsoft's Powerpoint (Mac) message boards.

Problems copying iTunes folder to an external hard drive - "The operation can't be completed because the item FILE NAME is in use"

Hi,
I have been trying to back up my iTunes folder from my MacBook hard drive over to a new LaCie external hard drive. However, whenever I try to do it at some point during the copying I keep getting the warning "The operation can’t be completed because the item FILE NAME is in use". Each time I have tried it, it is always a different file name that comes up and at different points of the copying. Following the warning, the copying stops and cannot be restarted.
I tried copying the iTunes folder to another Lacie external hard drive that I have, and it worked fine so I am guessing that it maybe something wrong with the hard drive.
I've been trying various approaches all day and can't seem to get anywhere with it - all very frustrating, so any help would be much appreciated!
Thanks.

If you don't have other backup data on it, reformatting external drive could solve the problem.

I get this message "The operation can't be completed because an unexpected error occurred (error code -50)" when I try and add any files to my Time Capsule

I get this message "The operation can’t be completed because an unexpected error occurred (error code -50)" when I try and add or delete any files to my Time Capsule. It just started happening a week ago.

I would get an external drive today and copy all your stuff off the TC.. forget trying to load more onto it. There is a good chance after 3years (A 2TB should be only about 2years tops), the disk or the TC itself is on the way out. Do it immediately. If TM is also failing to backup you need to recognise symtoms of impending doom.
Unfortunately the error messages are archane and it is hard to discover their meaning.
You also cannot verify a network drive.. you can verify the TM sparsebundle though so do that.
A5. http://pondini.org/TM/Troubleshooting.html
Reboot the whole network from off.. certainly if you run later OS it can simply lose the drive..
If you still fail to be able to copy to the TC.. then get that external and copy off it. Tell us if you can do that.

I keep on getting this error when i try to copy files to my 2T Time Capsule, Please help im running out of space on my MacBook Pro.... The operation can't be completed because an unexpected error occurred (error code -50)

I keep on getting this error when i try to copy files to my 2T Time Capsule, Please help im running out of space on my MacBook Pro....
The operation can’t be completed because an unexpected error occurred (error code -50)

I would get an external drive today and copy all your stuff off the TC.. forget trying to load more onto it. There is a good chance after 3years (A 2TB should be only about 2years tops), the disk or the TC itself is on the way out. Do it immediately. If TM is also failing to backup you need to recognise symtoms of impending doom.
Unfortunately the error messages are archane and it is hard to discover their meaning.
You also cannot verify a network drive.. you can verify the TM sparsebundle though so do that.
A5. http://pondini.org/TM/Troubleshooting.html
Reboot the whole network from off.. certainly if you run later OS it can simply lose the drive..
If you still fail to be able to copy to the TC.. then get that external and copy off it. Tell us if you can do that.

I have one folder on an XSAN that one machine can not make changes to. Whenever I try to duplicate or copy a file in this folder I get 'The operation can't be completed because an unexpected error occurred (error code -50).'?

I have one folder on an XSAN that one machine can not make changes to. Whenever I try to duplicate or copy a file in this folder I get 'The operation can’t be completed because an unexpected error occurred (error code -50).'
The permissions are fine, and I have trashed the finder plist and reset the NVRAM.
Anyone have a answer?
Thanks

Tips I received so far (thanks to A-Mac via Twitter http://www.a-mac.nl and Remco Kalf http://www.remcokalf.nl/)
- make sure you have at least 10% of your harddisk in free space (I had only 5%).
- do a PRAM-reset (http://support.apple.com/kb/ht1379)
- perform a hardware test (http://support.apple.com/kb/HT1509)
- make a complete backup (with for example Carbone Clone Copier, see http://www.bombich.com/)
- after complete backup: use diskwarrior (boot from Diskwarrior DVD, first perform diagnostics, then perform "Rebuild" which rebuilds your file directory).
So far I only cleared up some space on my HD, and already the problem occurs less.
Still, I will go through the other tips too.
(will post progress)

Cannot delete file: The operation can't be completed because the item "DataReferences" is in use.

I have a My Book TB Drive where all of my Time Machine backups go to. I decided to delete some older version of backups. They ended up in my trash can. When I deleted the items in my trash can, all of them erased with the exception of one file. This file refuses to go! I have tried "Empty Trash", "Secure Empty Trash" and holding the Option Key + "Secure Empty Trash". Each time the I get the following error: The operation can’t be completed because the item “DataReferences” is in use.
If I unplug the My Book TB Drvie, the file dissapears from the trash can. If I plug it back in, it reappears.
I am not sure what to do anymore. Any suggestions?
Thanks!
MacMini
Mountain Lion (Error originated in OS X)
My Book TB (External Hard Drive)

I found an article on how to allow third party apps. Posted it below just in case if anyone is interested.
http://www.computeraudiophile.com/f11-software/your-security-preferences-allow-i nstallation-only-apps-mac-app-store-and-identified-developers-12789/
Anyhow, I was able to do the double click on the trash it.I tried the "fast" version and the "really stuck" version and unfortunately, none of the options worked.
Any other suggestions?

Can't copy file to network drive as "The operation can't be completed because the [Filename] is in use

Following upgrade to Yosemite I now can't copy files from iMac to my network HDD in external media center. I have iMac connected by wi-fi to airport extreme and media center connected to airport extreme by cable. I can see the HDD as a network drive on my iMac and can initiate the copy but right when copy process is finished I see "The operation can’t be completed because the [Filename] is in use". I am trying to copy different media files downloaded from internet which are not used by any program and stored on my hard drive. I actually can copy small files of 1mb and it works but anything above 20mb is halted. I can also move/copy/delete the file on iMac. Cant understand the nature of the problem. I tried to format external HDD as EXT2/EXT3/NTFS but same outcome.
OS X Yosemite 10.10.3 | iMac late 2009 | Apple Airport Extreme | Dune HD Base 3D mediacenter

Have you tried a restart or logging out/in?
Some more ideas.
Re: The operation can’t be completed because the item “ " is in use.

I'm trying to delete files from and external disk and i get this: The operation can't be completed because an unexpected error occurred (error code -1407) can somebody help me? files do not get deleted..and the trash not emptied.. thanks

I'm trying to delete files from an external disc and it doesn't let me couse this pops up:
The operation can’t be completed because an unexpected error occurred (error code -1407)
Please what does it mean? I also have a file in the trash of my mac book named something similar to: a'*.'*.'*'.*.
and this cannot be deleted either..
Please let me know what I can do.
I also have many files in the external disc that I need so I cannot do a format..
Thank you.
Best Regards
Karin

Have you tried putting the file from your Drobo, onto your computer, then onto to the external hard drive?

I tried to empty the trash, full of back up file from my hard disk and it just says: "The operation can't be completed because an unexpected error occurred (error code -8003)"

I have an external hard disk of 319.73 GB that I use as back up memory and where I put all the movies and other files that I can't leave on the computer as they occupy too much memory space . One day I was deleting all the previous dated back up to have more space on it , but had to stop the trash for doing it cause it was taking too long and now every time that I try to empty the trash it just says "The operation can’t be completed because an unexpected error occurred (error code -8003)" and even if I press CONTINUE it won't empting it . I'm not really pratical with this things and I tried already to find out the solution here and on Google but apparently nobody ever had a similar error code and I don't know what else to do.
I've a MacBook Pro with a Mac OS X 10.6.8 Version.
Thanks again for the help and sorry if I did some english mistakes !
PEACE & LOVE

Hey donnie90,
It seems like this article might be the best for helping you address this issue:
You can't empty the Trash or move a file to the Trash
http://support.apple.com/kb/ht1526
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Can't move any files... "The operation can't be completed because you don't have permission to access some of the items."

This is a strange one... I just recently did a complete format/reinstall of Lion because of very poor performance after upgrading.
So I'm on a totally fresh system, no TimeMachine restore or anything. I've installed all my apps from scratch - no prefrence file backups or anything. Everything is fresh.
Yesterday I tried to copy a file from one folder to another and I got the error "The operation can’t be completed because you don’t have permission to access some of the items". Checked file permissions... repaired disk permissions... made sure I was logged in as admin (I only have one account)... everything looks good.
This is now happening when trying to copy any files anywhere on my machine... Very frustrating.
There's a couple strange side-effects I've noticed:
- I can move & copy files just fine in terminal... without sudo...
- The little lock icon in the bottom right of the Get Info window doesn't do anything - I can't unlock it. I can still edit the permissions for the file/folder but I can't select the "apply to enclosed items..." option.
Does anybody know what the heck is going on?

jsd2 wrote:
Try creating a new admin user account, logging into it, and then creating some new items on the Desktop and elsewhere. Does the same thing happen there?
Ok the strangeness continues!
I created a new "TestAdmin" account, but it doesn't show up in the Users & Groups prefrences sidebar... The /Users/testadmin folder was created, but the account doesn't show up in the prefrences or login window...
I tried a reboot to see if the account would show up and it still doesnt.... However after the reboot I am now able to copy files again!
I'm paranoid that the problem will show up again since I have no idea what fixed it. I tried rebooting previously after repairing permissions which didn't solve the issue so it's not like I haven't rebooted since it started.
And now I have the issue of not being able to create user accounts.
A little dissapointed with Lion to be honest... the new features are cool but there are so many little bugs it really feels half-baked.

Cannot backup my files / copy my files and folders due to error message " The operation can't be completed because an item with the name ".DS_Store" already exists. "

Similar Messages

Maybe you are looking for