Cannot cancel print job on network B9180

I have a B9180 network connected printer with an IP number. A print job is registered and cannot be printed or cancelled from the computer that created the job. I have cancelled the job on the printer using the X button because it would not cancel from the computer.. The computer has been restarted, but the print job is still registered in the printer cue (Vista 64) for the printer.  I can select the job and select cancel, the printer says it is cancelling, but does not complete the cancel.
I cannot print any new jobs due to the bad job shown in the cue.
Can someone tell me how can I cancel the bad print job and clear the cue on the computer? I have tried everything I know.
Thanks
Solved.

By Pravin Chalise
Big Computer, Kirtipur, Kathmandu, Nepal
Please go through instructions carefully:
Ist Method:
a) Open your computer and go to printer (control pannl (your printer))
b) Double click printer icon. It lists all the print jobs.
c) Right click your que job>choose 'Delete' or 'Cancle'
2nd Method:
a) Go to spool folder eg: C:\WINDOWS\system32\spool\PRINTERS (in most cases)
b) select all jobs which are in que.... and simply delete them.
Thanks !!
(tested on my computer at Canon LBP 2900)

Similar Messages

  • Cannot cancel print job - error ePC 551

    I cannot cancel print jobs, when i click the cancel option I get and error code ePC551

    Resolved...just had to go into Devices and Printers, select the printer and cancel the job.

  • Cannot cancel print jobs from queue in Windows

    We have some print jobs we sent to the Bonjour printer when we were off network, they still show in the windows queue, but we cannot cancel them, any suggestions?
    Matt

    Short of removing Bonjour, then reloading it, not much. Presuming you're using Windows, have you tried deleting them, then turning off the computer, then turning it back on? Sometimes that does it.
    Doc

  • Cannot Cancel Print Job!!!

    Hi, I have tried everything, disconneting everything, but nothing works, the program apparently does not work, the normal way to just delete a job is not working, have hp deskjet f2210, and it will not cancel the print job no matter what I do! Any ideas? Thank you in advance for reading and trying to help me!

    Oh yes, don't you just love having to reboot your PC to clear up the print queue?  Well, I don't and have been using a little freeware app called "Stalled Printer Repair".  Google will find it for you.  I don't even think it needs to be installed.  You just run it.  I have found that it almost always cleans things up without having to kill processes and reboot.  Nice!
    --Larry

  • HPf4280 Cannot cancel print job

    I have a print job in que that will not let me cancel. It is not "paused" please help
    Thanks!

    Hey @Ninja1987 ,
    Thank you for joining us on the HP Forums today, hope you enjoy your time with us!
    I understand you have a print job stuck in the print queue.
    Use the HP Print and Scan Doctor.
    Click here to download and run the Print and Scan Doctor >>> www.hp.com/go/tools
    Have a nice day!
    I worked for HP.

  • Linux client can't cancel print jobs in print monitor

    CUPS print server on Mac OS X server 10.4
    CentOS 4.4 linux client
    - Mac OS X server and CentOS linux client on different authentication sources
    The CentOS 4.4 linux client is configured for CUPS printing and pointed to the Mac OS X server CUPS print service.
    The linux client can successfully print to available printers servered by the Mac OS X server.
    The linux client has a print monitor. Normal user on linux client cannot cancel print jobs thru this print monitor. Selection of print job and pressing the 'cancel' button do not effect a cancel. Admin user on Mac OS X print server can cancel the job from the print server.
    Is authorization required for a client to cancel a CUPS print job on the client?
    Is same authentication setup required for both client and server?
    Thanks,
    -Neil

    Hi,
    From the Desktop, hold down the Windows key and press R.  Into the Run window, type services.msc and hit enter.  Browse down to the print spooler service, right click it and select Properties then click on the Stop button.  Now browse to C:\Windows\System32\Spool\PRINTERS and delete the job inside this folder - You may need to click a prompt to gain the appropriate authority to open the PRINTERS folder.
    Restart the computer and you should find the document(s) have been removed.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Pictures are not shown when saving to PDF.  Cannot Preview Print Job.

    Help! Pictures are not shown when saving to PDF.  Cannot Preview Print Job.

    I guess you need to fix it
    Or if you would like some help provide some information - there are no mind reader supporting this forum and we can only work with the information you give us - right not that is "it does not work"
    iPhoto has no "save to PDF" function - exactly what are you doing? and what exactly do you want to do?
    LN

  • Goto saving images into a pdf and a message comes up " cannot start print job"

    I an having a problem with my lightroom 4- I goto save my images into a PDF and it comes up " cannot start print job" and wont even save the images. What can be the problem, ive never had the situation before.

    Hi Sasha,
    Using Acrobat, you can create forms that are called AcroForms. The forms created in LC Designer are called XFA (XML Forms Architecture) and are more data centric. While both will open in Acrobat, they are completely different animals.
    The issue with users not being able to save the data with Reader is that the form is not Reader Enabled. You can Reader Enable a form using one of two methods:
    Reader Enable the form using Acrobat Professional (V8 or below) or Acrobat Standard (V9 or above). Note there are licensing restrictions.
    Reader Enable the form using the full server product Adobe LiveCycle Reader Extensions ES2.5. This involves additional licensing fees.
    Have a look here: http://assure.ly/etkFNU, at the features that are available depending on whether the user has Acrobat or Reader; if the form is Reader Enabled; and how the form was Reader Enabled.
    The issue of Reader Enabling would also apply to AcroForms.
    I don't think that you need to dive into LC Designer just yet, as forms created in LC Designer face the same issues about Reader Enabling as forms developed in Acrobat.
    If your usage complies with the EULA, then you could Reader Enable your form in Acrobat.
    Hope that helps,
    Niall

  • UNABLE TO CANCEL PRINT JOB THAT KEEPS PRINTING SAME COPIES

    How do you cancel print job on a HP Deskjet D1520 with Windows Vista?
    THANKS!

    Since this printer does not have a physical "Cancel" button, the easiest way of stopping a document print is to clear the document from the Print Queue.
    To remove a document from the print queue manually:
    1. Depending upon your operating system, do one of the following:
    • Windows Vista: On the Windows taskbar, click Start, click Control Panel, and
    then click Printers.
    • Windows XP: On the Windows taskbar, click Start, click Control Panel, and
    then click Printers and Faxes.
    • Windows 2000: On the Windows taskbar, click Start, point to Settings, and
    then click Printers.
    2. Double-click the icon for your product to open the print queue.
    3. On the Printer menu, highlight the document, click Cancel or Purge Print Document,
    and then click Yes to confirm.
    Now, if the document has already started printing and you want to stop it before it finishes; then simply lift the top access door which will pause printing. Remove the document from the print queue now. If it is no longer in the print queue, then power off the printer. Wait about 30 seconds and power on the printer again. This should have stopped the document from printing.
    007OHMSS
    I was a support engineer for HP.
    If the advice resolved the situation, please mark it as a solution. Thank you.

  • Delete "Cancel Print Job" pop up

    5.23.11
    Every time my HP Officejet Pro L7780 starts printing,
    a pop up screen appears in the lower right hand corner
    of my monitor: "Cancel Print Job". How do I prevent this
    popup from displaying?
    Dell 690, WinXP-Pro
    Sincerely,
                                              Ralphgold

     Hi @TJBar, and welcome to the HP Forums!
    I see you're looking into how to cancel your print jobs.  I would like to assist.
    When printing, on the front panel of your printer you will see a large red 'X'.  This will allow you to cancel any print jobs by touching the X.
    Please let me know if you have any questions.  Thanks for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • How to cancel print job with control panel on HP8610

    Is there a way to cancel a print using the control panel of the HP8610 rather than using task manager?
    This question was solved.
    View Solution.

    Welcome to the forums LucyRicky!
    I understand you are looking to cancel print jobs with your Officejet 8610. I have found 2 guides for you to show you how to cancel them.
    Windows: Cancel printing
    Mac: Archived - Mac OS X: How to Delete Printers and Print Job Lists in the Print Center
    I hope that helps resolve your question.
    Happy Thursday
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Can not cancel print job hp officejet 8500 in windows 8

    I can not cancel print job for a HP officejet 8500 in windows 8
    This question was solved.
    View Solution.

    Hi,
    From the Desktop, hold down the Windows key and press R.  Into the Run window, type services.msc and hit enter.  Browse down to the print spooler service, right click it and select Properties then click on the Stop button.  Now browse to C:\Windows\System32\Spool\PRINTERS and delete the job inside this folder - You may need to click a prompt to gain the appropriate authority to open the PRINTERS folder.
    Restart the computer and you should find the document(s) have been removed.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • How do I cancel printer job queue? CanonBJC-250 will not function because of long queue. cannot find control.

    Apparently the print order was pressed several times. Now there is a long list of print orders and the printer will not work.

    This is more of a Ubuntu-related question than a Firefox one. When print jobs are queued up, you should get a printer icon in the notification area (beside your clock by default). Clicking on the printer should allow you options to cancel the print jobs. Give it a try -- I can't guarantee if it works as I haven't got any printers installed in my Ubuntu.

  • How to cancel printing jobs that are in the queue? Model is : HP Laserjet 3055

    I wanted to print a 200 page book from my laptop, so I pluged in the printer to the laptop and pressed print on laptop. Then immediately decided not to print it, so I pressed cancel on printer. But the job has not been canceled at all. Every time I try to print something the it always starts with the job I wanted to cancel in the beginning. And on the laptop the message block asks if I wish to add to printing queue. 
    I would like to cancel the job that is sitting in the queue on the printer for good, if anyone can advise please help me, very desperate!!!
    Thank you 
    Robertha
    This question was solved.
    View Solution.

    Hi Robertha,
    Open the printers folder, and then double click on the printer. Click printer, and then cancel all documents.
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • HP LaserJet 300 M375 nw cancels print job after a few pages

    I just received a new replacement MFP through the insurance I purchased through Office Depo. I have uninstalled and reinstalled the software on my desktop and my work laptop in order to get this one working.  I'm on wifi with both computers. The printer is automatically cancelling my print jobs after 7 - 9 pgs when I'm trying to print 25 or 50 pages at one time.  Also, I'm not able to get the "scan" icon to show up on my desktop on my laptop.

    Hello! Could you please provide more information regarding the issue, such as which version of MAC OS X you are using? Any additional information such as error messages or lights on the printer will be helpful in resolving your issue. Thanks!
    Help the community by marking this post as a solution if it solved your issue!.
    If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

Maybe you are looking for

  • I cloud downloaded all except photo stream to my mac book OS x 10.6.8 how do i get the photo stream?

    I have a 2008 macbook 10.6.8 software, I recently downloaded icloud but the photo stream isn't showing up although i have all the other elements of Icloud i.e. calender, mail, notes etc....everything except photos strream. What is the problem?  I've

  • Using the Canopus to convert dvd and Hi8 to dv

    Looking at purchasing the Canopus 100 or 110 to convert my hi8 tapes and some dvds that were taken with a sony mini-dvd unit (dont' know which one). Questions: I don't need to convert everything just snips here and there. Can I do that while importin

  • Camera/photo booth not working

    Hi. The camers and photo booth applicaions are not responding. although face time appears to work. My only action prior to them not working was to sync with apple and download an update to the ipad software. (version 4.3.5). Have restarted ipad, rese

  • Mov type.

    Hi, While I am using T code-MB1C with mov type-561,system showing error that Parameters for plant PLT1 not maintained in Inventory Management. So please give me the solution for this. Thanks, RAsh.

  • How to make a custom table?

    Ok, so an assignment is due today. I am up to the last part and what you need to do it make a custom graph, I have an iMac (OS X Yosemite) and I need to make a table like the one showed on the image I attached. If you look on the right hand side of t