Cannot connect to iCloud server on iPad after installing latest update

I cannot access iCloud through iPad since installing latest update. Keep getting Accept the new terms etc" but can't do so through the setting s page

When I go to the settings page to access iCloud and click on terms and conditions it gives the message

Similar Messages

  • HT201412 None of my apps works after installing latest update.

    After installing latest update on my iPad 2, none of my apps work.  I click on the app, it flicks and goes back to home screen. Powering iPad off and restarting it did not work.  Please help.

    Did you update the apps? Check app store. Most of them had updates to support the iOS 5.1.1. It's been out a while

  • After installing latest update the contact photos don't show on incoming call

    After installing latest update the contact photos don't show on incoming call

    Possible iTunes issue:
    Try the following after adding photos.
    Go to file
    Then Home Sharing
    Select photos to share
    Click on All Photos already selected Do anyway
    When Apply turns black click on Apply
    Now go to Apple TV to see if photos there
    Or restart iTunes.
    Works for me every time photos do not appear on my Apple TV 3
    Hopefully will work for you.

  • What is cloudflare and why is it on my ipad after the latest update?

    I am trying to access etsy.com via safari on my ipad. I keep getting this message.
    "You've requested a page on a website (etsy.com) that is on the CloudFlare network. CloudFlare is unable to resolve your requested domain."
    Thiss has only started after my latest update earlier this week. This seems to be the only website where I get this message. Can someone please tell me who is cloudflare, why am I getting this message and  how do I fix this.
    Thanks for any help. I am not a techie so plain English is good.
    gaila

    I'm not sure why you posted the Pinterest extension link, but I had no problem accessing etsy.com. Try clearing Safari, force close the app and then reset your iPad. Then see if you can access the website.
    Go to Settings> Safari> Clear Cookies and Data.
    In order to close apps in iOS 7, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    SInce you are not that techie, by your own admission, if you can't get the hang of force closing the app, just clear Safari and reset the iPad and then try again.

  • Saving Issues after installing latest update

    Today, after installing an update to my Acrobat XI Standard, I am getting an error message when trying to save .pdfs from an email to my server. The error message is: The document could not be saved. There was a problem reading this document (21). Any way to fix this?

    Hi JasBell,
    Which server are you trying to save to?
    What happens if you copy the document to the local computer first and then copy to the server?
    Regards,
    Rave

  • Cannot connect to iCloud server after 10.9.4 update.

    Attaching EtreCheck information.  Connection doctor states: Could not connect to iCloud iMap server.  Restart of mail did not work. Reboot of computer did not work.
    Thank you for any help you can provide.
    EtreCheck version: 1.9.12 (48)
    Report generated July 19, 2014 at 10:06:48 AM MST
    Hardware Information:
      iMac (27-inch, Late 2013) (Verified)
      iMac - model: iMac14,2
      1 3.5 GHz Intel Core i7 CPU: 4 cores
      32 GB RAM
    Video Information:
      NVIDIA GeForce GTX 780M - VRAM: 4096 MB
      iMac 2560 x 1440
    System Software:
      OS X 10.9.4 (13E28) - Uptime: 0 days 0:16:41
    Disk Information:
      APPLE SSD SD0128F disk0 : (121.33 GB)
      EFI (disk0s1) <not mounted>: 209.7 MB
      disk0s2 (disk0s2) <not mounted>: 120.99 GB
      Boot OS X (disk0s3) <not mounted>: 134.2 MB
      APPLE HDD ST3000DM001 disk1 : (3 TB)
      EFI (disk1s1) <not mounted>: 209.7 MB
      disk1s2 (disk1s2) <not mounted>: 3 TB
      Recovery HD (disk1s3) <not mounted>: 650 MB
    USB Information:
      Apple Inc. BRCM20702 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple, Inc. Keyboard Hub
      Apple Inc. Apple Keyboard
      HP Photosmart 6520 series
    Thunderbolt Information:
      Apple Inc. thunderbolt_bus
    Gatekeeper:
      Mac App Store and identified developers
    Kernel Extensions:
      [not loaded] com.philips.iokit.DLconnect (85 - SDK 10.4) Support
      [not loaded] com.roxio.TDIXController (2.0) Support
    Launch Daemons:
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.adobe.SwitchBoard.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [loaded] com.oracle.java.Helper-Tool.plist Support
      [loaded] com.oracle.java.JavaUpdateHelper.plist Support
      [running] com.parallels.mobile.dispatcher.launchdaemon.plist Support
      [loaded] com.parallels.mobile.kextloader.launchdaemon.plist Support
    Launch Agents:
      [not loaded] com.adobe.AAM.Updater-1.0.plist Support
      [running] com.fujitsu.pfu.ScanSnap.AOUMonitor.plist Support
      [running] com.newwellnesssolutions.DLconnectMonitor.plist Support
      [loaded] com.oracle.java.Java-Updater.plist Support
      [loaded] com.parallels.mobile.prl_deskctl_agent.launchagent.plist Support
    User Launch Agents:
      [loaded] com.adobe.AAM.Updater-1.0.plist Support
      [loaded] com.adobe.ARM.[...].plist Support
      [loaded] com.parallels.mobile.startgui.launchagent.plist Support
      [running] jp.co.pfu.ScanSnap.SearchablePDFConverter.plist Support
    User Login Items:
      iTunesHelper
      Dropbox
      ScanSnap Manager
    Internet Plug-ins:
      Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 Support
      FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
      Default Browser: Version: 537 - SDK 10.9
      AdobePDFViewerNPAPI: Version: 10.1.10 Support
      AdobePDFViewer: Version: 10.1.10 Support
      Flash Player: Version: 14.0.0.145 - SDK 10.6 Support
      QuickTime Plugin: Version: 7.7.3
      SharePointBrowserPlugin: Version: 14.4.2 - SDK 10.6 Support
      JavaAppletPlugin: Version: Java 7 Update 60 Check version
    Safari Extensions:
      Save to Pocket: Version: 1.9.1
      Open in Internet Explorer: Version: 1.0
    Audio Plug-ins:
      BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
      AirPlay: Version: 2.0 - SDK 10.9
      AppleAVBAudio: Version: 203.2 - SDK 10.9
      iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins:
      Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    3rd Party Preference Panes:
      Flash Player  Support
      Flip4Mac WMV  Support
      Java  Support
    Time Machine:
      Auto backup: YES
      Volumes being backed up:
      Destinations:
      Data [Network] (Last used)
      Total size: 3 
      Total number of backups: 55
      Oldest backup: 2014-01-26 04:43:07 +0000
      Last backup: 2014-07-19 15:22:17 +0000
      Size of backup disk: Excellent
      Backup size 3  > (Disk size 0 B X 3)
      Time Machine details may not be accurate.
      All volumes being backed up may not be listed.
    Top Processes by CPU:
          1% WindowServer
          1% fontd
          1% SearchablePDFConverterOCR
          0% dpd
    Top Processes by Memory:
      295 MB Mail
      164 MB mds_stores
      164 MB CalendarAgent
      131 MB com.apple.IconServicesAgent
      131 MB ScanSnap Manager
    Virtual Memory Information:
      27.47 GB Free RAM
      2.37 GB Active RAM
      433 MB Inactive RAM
      1.74 GB Wired RAM
      419 MB Page-ins
      0 B Page-outs

    Restart the router and the broadband device, if they're separate. If there's no change, see below.
    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Cannot Connect to iCloud server on my PC

    I receive the following error when trying to log into iCloud on my Windows 7 (64Bit) PC:
    "Connection Error iCloud encountered an error while trying to connect to the server"
    I get this error message when using 2 different Win7 PC's - does anyone know what the problem might be?
    There are no other issues with my iPone 4s, iPad or account access - just can't log into iCloud from my PCs.
    Thanks in advance for any help!

    I am sooooo frustrated - I did the "find my friends" app and it still comes up - unable to connect to server.  How does this get fixed.  HELP!
    and why doesn apple not solve this issue.

  • HT201263 Problems with ipad after installing security update iOS 7.0.6

    Cannot get my iPad 2 out of recovery mode after installing the security update iOS 7.0.6
    have tried plugging in to iTunes- on computer but doesn't get iPad out of recovery mode!  Help?!?

    Did you already try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again? You will not lose data by resetting, but it can cure some glitches.
    If this does not work, try to connect in recovery mode, explained here:
    iOS: Unable to update or restore

  • After installing latest update cannot access "messenger options" under the options tab

    After installing Firefox latest update I cannot access "messenger options" under the options tab. The other tabs, themes and mail options work when clicked but nothing happens when I click "messenger options" It works fine in IE.

    When I go to the settings page to access iCloud and click on terms and conditions it gives the message

  • Why did my iPad go into recovery mode after installing latest update?

    I installed the latest update for the operating system and when my ipad 3 restarted, I get a unresponsive screen with a iTunes logo in the middle and a picture of the charging cord on the screen.  It does not let me do anything with it.  Any ideas?

    Why it happened nobody can know for sure. Did the download stall? Do you run antivirus software that can interfere with the download? Did your internet connection cut out?
    There could be any number of reasons why it happened. Were you able to restore the iPad and get it up and running again?

  • HP Power Advisor has stopped working after installing latest updates

    I have been using HP Power Advisor successfully on my Lenovo X230 running Windows 7.  After installing the latest Power Advisor updates it no longer works.  I can select a voltage from the dropdown on the Input Voltage screen but nothing happens when I click on the Go button, as if it is disabled.  I've tried re-installing the download package which works fine but it stops working again as soon as I install the latest updates.  Any ideas how to solve this?

    Well on the website for HP power Advisor, it specifically says, 
    "Accurately estimate power consumption of your HP server and storage products"
    There could be many different things interrupting your use of the program, but I'm going to say that maybe your largest problem with using the HP software designed for HP machines is your Lenovo.
    Sorry,
    Good Luck!
    Did I help you? Please give me a Thumbs up to help let others know!

  • After installing latest update Realplayer recording no longer works, I think Mozila is using a library file with the same name

    After installing the latest update to Firefox onto Vista operating system the record part of real player no longer works, I think Mozila and Real are using a library file with the same name and the Mozila update is overwriting a Realplayer library file.

    I was giong to say, "Help me, Adobe Joe Kenobi", but it looks like you're growing a beard waiting for an answer, too.
    The same thing happened to me today. I trusted the "update" message since it was from Adobe, and apprently did so at my own peril. Now I get the "failed to load Core dll" message with a secondary reference to a memory address.
    Just an observation, but what good are these forums when there are no answers? I see this problem as "Caused by Adobe Update", and would expect them to troublshoot and offer up a remedy. Since you've been waiting over two months with no response, I suppose it's time to trek off wasting more of my precious time to fix their problem. If I find the solution, I'll post it back to you.
    May the Force be with you.
    Mark

  • G4 will not boot up after installing latest update

    Just installed latest OS 10 update (10.4.8 or 9?) Mac will not boot up. The ring sounds on start up and the apple shows on video but it never gets to the rotating circle. It has been over an hour. I have restarted twice to no avail. I have also disconnect all peripheral. Do you have any suggestions as to what to do next?

    Hi-
    Welcome to Discussions!
    Try a boot in safe mode (startup holding"shift" key after chime). This will help determine if you have conflicting drivers, fonts,etc. present, and helps bypass damaged software components:
    http://docs.info.apple.com/article.html?artnum=107393
    If successful, run Disk Utility. If not, try a single user boot, and run fsck:
    http://docs.info.apple.com/article.html?artnum=106214
    Alternatively, boot from your OS install disk, and run Disk Utility.
    Post back with your results, please!
    G4 AGP(450)Sawtooth   Mac OS X (10.4.8)   2ghzPPC,1.62gbSDRAM, ATI9800, DVR-109,(IntHD)120&160,LaCie160,23"Cinema Display

  • T60 WLAN COMPLETELY GONE after installing latest Update Intel Wireless WiFi Link for Windows XP

    I just reinstalled a T60 from scratch TWICE  to the point of updating  - Intel Wireless Wifi Link for Windows XP -
    Just after that very latest Update (3.1.1.1 or so?)  there is no WLAN possible and I had to find out, that  a system restore is impossible either! (Simply does not work and asks me to get another point and try again)
    I have a full backup done by acronis 2010 so that does not bother me so very much.
    The point is that I like to WARN everybody to install that Update to their T60  e.g. 2008YWJ !!!
    (contains 3945AGB WLAN Module!)
    After Updating U HAVE NO CHANCE TO REPAIR IT! U get always the problem signature 
    szAppName: AcSvc.exe  szAppVer: 5.6.1.33  szModName: PfMgrApi.dll
    szModVer : 13.0.0.2  offset: 000d4912
    and the System wants to report that stuff to MicroSoft...again and again...every time u
    start AccessConnections.
    U can DEinstall AccessConnections and Intel Wireless Wifi Link for XP completely, reboot
     and REinstall it....just 2 get the same messages and NO WLAN anymore.
    I could not get out of this Driver Installation Hell until I did a complete Recovery Install and
     I got back to Hell when System Update REinstalled Intel Wireless WiFi Link for XP
    automagically...;-(((
    And again NO CHANCE to roll back, No chance to get rid of that annoying bug. This time I have an ACRONIS-Image so I can spare some time....
    Somebody shoud really CHECK this, because it should not be possible to break down an completely NICE RUNNING Thinkpad THIS WAY just by updating it! As it took me abaout 12 Hours of Administration by now I
    really would apreciate to help whomever to find out what the hell is responsible 4 this !!!
    Why is XP System Restore not working on an T60 to roll back to Point b4 installation of this Update???
    (I could  not use that Thinkvantage-System Recovery because it did not even get all its updates by the 
    time the system went in limbo during install! What i defintely can say is that it breaks at exactely
    same point when Intel Wifi Updates is installed...
    I do my Acronis Restore now and try 2 avoid this Update....;-(
    if anybody KNOWS how to get that system 2 an earlier point of an install orgy i whould be thankful to get that information...
    I am keeping alive 12 Thinkpads here R40 R50 T42 T43 T60 T61p T400 T500 and  NEVER
    experienced problems like this in many  years!
    cheers
        GAL9000

    gal9000, welcome to the forum,
    have you tried running windows system restore from safe mode? It usually works then because some anti-virus softwares will prevent it from running successfully from "normal" windows.
    Hope this helps.
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • After installing latest update Macbook won't start up.

    After installing the latest update my macbook won't start up. Instead of the login screen I get a flashing map icon with a question mark. My uncle says that means it can't find the startup disk and I had to startup from the install disk holding C but it didn't work. I'm quite desperate because I need my macbook for school (writing & producing music). I type this on a friend's computer... How can I fix this? Or do I really have to go to a mac store and part from my macbook for an unknown time...? :'(
    I don't exactly know what version I have (can't check it now either) but it's at least 10.6.something and I always install the updates...

    Hi
    Anything unusual happen during the 10.5.3 update installation phase?
    What type of iMac are you using? Your tag says G5 but also Intel core processors - it can't be both.
    Try this:
    -First unplug your computer and wait 10 minutes
    -Next, simultaneously reinsert the power cord while pressing the power button for 5 seconds then release
    -Press the power button again to start the computer - this resets the computer's system management unit (SMU) which controls your machines power functions.
    -Next, press/hold down the P/R/option/command keys for 3 Apple chimes. This clears the machine's PRAM. After the 3rd chime release those keys and immediately hold down the Shift key to put the machine into Safe User Mode
    -If you get to a log-in screen (may take several minutes as repair functions are occurring on the boot), log-in. When the login is complete, restart the computer as usual.
    If no go, I suggest taking the machine to a certified Apple tech, or if you live near an Apple store to the Genius Bar.
    Post back
    Message was edited by: Hawaiian_Starman

Maybe you are looking for