Cannot connect to Wi-Fi under Windows 7 in Boot Camp

I installed Windows 6 x64 the other day, installed fine, installed the Boot Camp software off my Mac OS X Install disc just fine. Everything works except that I cannot connect to my home Wi-Fi network, it says that information could not be gathered from this access point or something to that effect (in OS X at the moment, can't remember the exact message). But, if I turn on Wi-Fi tethering on my phone, I can connect to that just fine.
Any ideas?

Wrong section, oops

Similar Messages

Wifi under windows 7 boot camp keeps dying

I have been running windows 7 64 bit under Boot Camp for just under a week, and last night have started to have some pretty serious issues with the built in wifi.
Periodically, without any consistent cause, when I am booted into Windows 7, my internet connection begins to degrade. Not disconnect or anything, just taking on like 60% packet loss or more, pings to both my default gateway (the wifi router) as well as to anything further out on the internet. My ipad, iphone, macbook pro are all fine and able to use the internet at the same time without issue, its only the imac booted into Windows 7. I can reboot with no change, still completely unusable (unable to load even a single web page) for Windows 7. reboot to OSX, no issues. Its not the router, or the ISP, its JUST when I'm in win7 using wifi. I've changed IPs, used a static DNS, measured wifi, etc. I was using this setup for almost a week before the issues started, and I'm assuming its something wrong with Windows7. Fully patched and up to date, both OSX and Win7.
I finally figured out that I can temporarily fix the problem by resetting the driver for the wifi interface under the Network Adaptor troubleshoot wizard in Windows, this buys me between 5 minutes to half an hour before the issue starts up again. Nothing else I've found will fix the issue even temporarily.
I finally ran a 50 ft ethernet cable from the imac to the router and this has for now solved the intermittent issue, but its not sustainable this way as I cannot leave the cords like this. But clearly there seems to be an issue with the wifi driver in windows that boot camp is using.
Can anyone provide some suggestions of what to look for within windows or a way to debug this more directly? I used the BootCamp assistant to burn a DVD of drivers at install time and I believe they were the most recent versions, but not sure how to check further. Device manager reports I am using the Atheros AR938x Wireless adaptor, and this is a mid-2011 27" iMac running Lion.

I'm having the same problem. Wifi loses connection after 5-ish minutes.
Wondering if it's an issue with the 802.11n drivers...? Seems a little more stable on the "g" networks.
This has been happening since the latest OS X update. I have a mid-2010 Macbook Pro 15".

Connecting to Wireless Network Using Windows in Boot Camp

Hello!
I installed Windows on my MacBook Pro, and I know how connect to the internet using Mac OS X, but I have no idea how to connect to my AirPort network in Windows. I know it must be simple, but I just don't know what to do.
Thank you!

I went to Microsoft's site and looked up how to connect to a wireless network. You have to enter the wireless address or something into Internet Explorer.
-Hope this helps!

I cannot connect to an update for windows for adobe premiere elements 9 ar to change my sign-in. it gives me an error message 400 saying photo shop is unavailable. this makes the second day.

I cannot connect to an update for windows for adobe premiere elements 9 ar to change my sign-in. it gives me an error message 400 saying photo shop is unavailable. this makes the second day.

This is a user to user forum, not Adobe support
Select a topic, then click I STILL NEED HELP to start Premiere Elements Online chat
-http://helpx.adobe.com/contact.html?step=PRE

Cannot connect to itunes store on windows pc

Cannot connect to itunes store using windows pc. Also trying to update 1st generation ipod touch.

Try:
Can't connect to the iTunes Store
What is the problem/question on updating the 1G iPod?
It can only go to iOS 3.1.3 that you get here.
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)

After trying all kind of possible solutions Itunes cannot connect to the store. Windows 7

after trying all kind of possible solutions Itunes cannot connect to the store. Windows 7

With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Windows 7 - Boot Camp - No Internet Connection

Hello,
I just installed windows 7 (enterprise 64bit) onto my iMac (running the latest OS). When I log onto the Windows 7 OS it says I have no internet connection. I use wireless, is this a problem with my network working with windows 7? wireless works on Mountain Lion just fine. Any tips on how to resolve this issue? I looked online for help and it says to reinstall the drivers from the boot camp CD. But these were old post when they use to have CDs for Boot Camp, it is now just an application on my mac. I would appreciate any help or suggestions.
Thank you,
Zach

Welcome to the Apple Support Communities
Windows requires Boot Camp drivers to work correctly on a Mac.
1. Press Option key when your Mac starts and choose Macintosh HD.
2. Open Boot Camp Assistant, download the Boot Camp drivers and burn them into an USB disk or DVD.
3. Start in Windows and install Boot Camp drivers

When you load Windows via Boot Camp Assistant program and run Windows does not recognize the "usb" outlets cannot identify the device through the Dvd or flash

When you load Windows via Boot Camp Assistant program and run Windows does not recognize the "usb" outlets cannot identify the device through the Dvd or flash

Did you install BC drivers on the Windows side?

How can I get Windows 7 Boot Camp to find my Magic Mouse?

Hey!
So I just bought a Magic Mouse and it works flawlessly in OS X.
But when I use Windows 7 Boot Camp I can't find the mouse to add it as a new device. My bluetooth works just fine and I have the Boot Camp 3.3 drivers.
I tried rebooting, turning the mouse off and on, read a bunch of guides on the internet but no one is having issues CONNECTING the mouse, only getting it to work, so my research is proving to be hard.
Can you guys help me?
Thanks!

Hi Maia,
Can you please mention your MAC model (MBA 2011, MBP, iMac?). Which OS X version?. Have you problems pairing other bluetooth devices?
You may want to try the following setps.
1.- First make sure that you have the latest EFI and software updates. Including latest bootcamp bluetooth drivers.
2.- Unpair MM in Mac OSX
3.- Do a Nvram and SMC reset:
http://support.apple.com/kb/ht1379
4.- Restart
5.- Pair your MM under Mac OSX
6.- Boot on Bootcamp assiging bootcamp as a starting partition
7.- Add your device.
Let me know if that worked, there are another tricks you can try but I need additional information.

GTA 4 on windows 7 BOOT camp texture problem, macbook pro 13 january 2011 help .

GTA 4 on windows 7 BOOT camp texture problem, macbook pro 13 january 2011 help .
any
my problem looks like this
http://www.youtube.com/watch?v=PGzgS57THMo
gta 4 steam !

If GTA IV believes the system is under specification even though the computer is powerful enough to run the game with higher settings, the following will fix this problem.
This will work if your problem looks like this: "resource usage 230/60" and you can't change any other setting
Just follow the steps:
Step 1: Create a text file named ‘commandline.txt’ (without the " ")
Step 2: Put the following statement inside it:
i5 users: -availablevidmem 18.0 (with the -)
i7 users: -availablevidmem 22.0 (with the -)
Step 3: Open the main GTAIV folder (C/ program files (86)/ rockstar games/ GTA IV) and copy the commandline.txt file into it.
Step 4: locate the file "GTAIV.exe" (in GTA main folder)
Right click the file and select Properties
Under the shortcut tab, you will see an area that says Target
Modify the Target adding the command line after the last quotation mark (just add the statement you added in commandline.txt)
(remember, i5 users: -availablevidmem 18.0 / i7 users: -availablevidmem 22.0)
It should look something like this:
Make sure to add space between " and -"
I hope This helps, although late cx

New Retina MBP + Windows 7 boot camp = no nVidia GPU

I'm hoping someone will correct me wrong on this...
I have a brand new 15" Retina MBP 2.6GHz 16GB RAM 500 SSD.
After finally getting Windows 7 SP1 installed (along with countless updates ) and boot camp 4.0, I have noticed some display problems. My only reslution options are: 1600x1200 (which looks stretched), 1280x1024 (reallly stretched), and lesser resolutions with which I didn't bother. This didn't seem to make sense given the nVidia 650M.
Also, NONE of the external video ports are working (Thunderbolt to DisplayPort, HDMI to HDMI, HDMI to DVI) -- they're simply not getting a signal at all.
So I went into device manager, and the 650M is not even showing up as being installed! All I see is "Standard VGA Graphics Adapter", which tells me Windows is only acknowledging the integrated Intel graphics.
I can't simply install an nVidia driver, as it can't see the device onto which that driver would be applicable.
I assumed this was an issue of the "automatic graphics switching." Apple confirmed this, telling me that Windows doesn't have an option to choose between displays. I couldn't find a way to trigger it with any third party app, either (including Adobe After Effects).
Further, Apple claims 64-bit drivers aren't yet available for this GPU, so even if I could switch it over, I'd have to step down to a 32-bit install.
So, basically, my boot camp side looks like a netbook.
I cannot be the only one experiencing this!
Thanks in advance,
Andrew

Paul22 wrote:
You can't install the windows support software before you partition. 1. Start boot camp in OS X and create the windows support CD; 2. Install windows using boot camp; 3. Install windows support software from the CD that you made.
I followed the boot camp manual exactly and the Nvidia drivers were not installed. I had to go into the Nvidia drivers directory in the windows support CD and manually run the setup.exe file. After that, the drivers were installed.
Note: when you create your windows partition in boot camp, you will select custom, and then format. It is critical that you format your boot camp partition and not your OS X partition. It will not say boot camp, but you can tell it's the right one by its size. For example, if you selected a 40 GB size for boot camp, the size of the drive you select to format should be 40 GB.
Paul
That is exactly what I said, are you sure you wanted to reply to me?
FYI, In a normal Bootcamp installation the partition will be named Bootcamp

I have an older Mac Pro (2006). I want to install Boot Camp and Windows. I have installrg a purchased Snow Leapord on the machine. To install Windows, am I limited to Windows 7? And where are the Windows 7/Boot Camp Drivers? On the OS disk? Download? Tha

I have an older Mac Pro (2006). I want to install Boot Camp and Windows. I have installed a boxed Snow Leapord on the machine. And it says the download of the Boot camp drivers cannot continue because they are not available. But at that point I have not inserted a windows disk, so how does it know i have XP?
So it appears I am limited to Windows 7? And where are the Windows 7/Boot Camp Drivers? On the OS disk?
Finally, since I have necer considered Windows 7 before, I assume there are no compatability issues with mainstream applications that were running in XP?
Thank you.

You're welcome
Just remember to reformat the partition (bootcamp partition) to NTFS with the windows installer, ensure to pick the correct partition.

Windows 7 boot camp

Hello. I got little problem today with bootcamp.
Few days ago I updated yousemite and bootcamp worked fine after that. Today I used yosemite and remember my partion in bootcamp is getting small and I wanted to give more space for windows. Sure I wasn`t able to just drag more space for bootcamp so I thought it could be ok to do new partion in machintosh disk in windows format as well and I made 3rd disk there as planning to be able to use that disk in windows. After that I continued my suff with os x and later tried to start windows via boot camp as I always do. Mac started reboot and suddenly black screen came and top left there was blinking line ( - ) and nothing happened after 10min.
So I just shut down my mac by pressing the on/off button and started it as os x after that. Went to disk ultility and removed that extra partion what I did earlier and tried to start windows again and same thing happened. When I`m booting my mac and pressing alt while that I`m not able to choose boot camp. I can just choose os x or recovery 10...
I also ran os x repair stuff and tried again but didn`t work. In general I think everything should be like before I did any new partion. But simply cannot choose bootcamp but I`m able to see bootcamp in disk ultility and I can choose restart mac using boot camp when using os x.
Sure I don`t have any back ups, so it`s kind a ankward. Hope I can start use windows/bootcamp without reinstall it.
So in the nutshell when I trying to boot windows when using os x I can choose start as a windows using bootcamp and after that it starts booting. After that black screen appear and I can see only white line in top left in the screen. Nothing really going to happen after that.
And when I`m booting and pressing alt I`m not able to choose bootcamp, just os x or recovery.

here.
ville:~ villehietalahti$ sudo fdisk /dev/disk0
Password:
Disk: /dev/disk0    geometry: 30401/255/63 [488397168 sectors]
Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: EE 1023 254 63 - 1023 254 63 [         1 -     409639] <Unknown ID>
2: AF 1023 254 63 - 1023 254 63 [    409640 - 425910456] HFS+
3: AB 1023 254 63 - 1023 254 63 [ 426320096 -    1269536] Darwin Boot
4: 0C 1023 254 63 - 1023 254 63 [ 427589632 -   60807168] Win95 FAT32L
ville:~ villehietalahti$ sudo dd if=/dev/rdisk0s4 count=1 2>/dev/null | hexdump -C
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS    .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 80 7c 19 |........?.....|.|
00000020 00 00 00 00 80 00 80 00 ff d7 9f 03 00 00 00 00 |................|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 e4 f1 41 28 34 42 28 f8 |..........A(4B(.|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 |t.............A |
00000190 64 69 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 |disk read error |
000001a0 6f 63 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d |occurred...BOOTM|
000001b0 47 52 20 69 73 20 6d 69 73 73 69 6e 67 00 0d 0a |GR is missing...|
000001c0 42 4f 4f 54 4d 47 52 20 69 73 20 63 6f 6d 70 72 |BOOTMGR is compr|
000001d0 65 73 73 65 64 00 0d 0a 50 72 65 73 73 20 43 74 |essed...Press Ct|
000001e0 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f 20 72 65 |rl+Alt+Del to re|
000001f0 73 74 61 72 74 0d 0a 00 8c a9 be d6 00 00 55 aa |start.........U.|
00000200

Simple question. Will my Magic Mouse work in Windows 8 Boot Camp 5.1 (Mavericks)

I think my question says it all. My magic mouse is not working and will not pair with my Windows 8 Boot Camp install done from the Mavericks Boot Camp setup. Should it work? Does it not work? Thanks.

you don't mention what mac you have because I suspect that the bluetooth driver for windows only support 1 input at the time over bluetooth
my magic trackpad works fine with bluetooth but my bluetooth mice require being run as usb device it can't connect using bluetooth at all

Windows 7 boot camp audio...too loud, even after fix

I've just recently upgraded to Windows 7 (32-bit) and also updated to Boot Camp 4.0 as well.
Once the Boot Camp update finished, the audio was scratchy and distorted. Fortunately I've installed the most recent version of Realtek HD Audio drivers.
The sound just gets clearer and however it gets too darn loud even it's on the middle volume. I've looked upon the sound manager from Realtek drivers but there isn't any advanced sound controls to keep the sound low and balanced.
Does anybody happened to this before and give me some good solution so to make the sound as balanced as possible?
By the way, it happened to me before when I was running Windows XP SP3 under the previous Boot Camp version. Then I've discovered the advanced controls to get the sound low and balanced and it worked like a charm! I wonder if I could do the same thing on Windows 7?

Just so you're aware dude this is a common issue with those running any version of Windows!! lol

Cannot connect to Wi-Fi under Windows 7 in Boot Camp

Similar Messages

Maybe you are looking for