Cannot construct URL for runtime check using entries in SLD

Hi,
we are using high availability for PI 7.1 and are facing to the problem to construct the url for Communication channel monitoring etcv. in rwb.
In the exchange profile it looks good. Is there another place to check parameters for sld?
Thanks in advance
Frank
Message: Cannot construct URL for runtime check using entries in SLD for component af.rbi.s3p1028; correct the entries in SLD
Stacktrace:
com.sap.aii.rwb.exceptions.OperationFailedException: Cannot construct URL for runtime check using entries in SLD for component af.rbi.s3p1028; correct the entries in SLD
at com.sap.aii.rwb.core.XIJavaRTCComponent.getConnector(XIJavaRTCComponent.java:211)
at com.sap.aii.rwb.core.XIRTCComponent.ping(XIRTCComponent.java:209)
at com.sap.aii.rwb.web.componentmonitoring.model.CompTestModel.doPing(CompTestModel.java:623)
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.doPing(CmDynPage.java:428)
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.updateTests(CmDynPage.java:528)
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.selectNode(CmDynPage.java:555)
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.process_treeClick(CmDynPage.java:484)

Hello
A combination of the notes below should resolve this error:
#764176 Error in XI due to inconsistent SLD contents
#1117249 Incomplete Registration of PI components in SLD
#1334053 No automatic PI 7.10 SLD Registration
#1278563 Specification of message server host in Exchange Profile
Regards
Mark

Similar Messages

Cannot Set URL For Report Server SSL Binding In SSRS 2008R2

Hi,
I have an SSL certificate that has a number of subject alternate names and I need the SSL binding for the report server and the report manager to be against one of these names, not the certificate name.
However, while it is possible to set the host header for a non-SSL identity and therefore control the URL reserved, it does not seem possible to set this for an SSL identity - the edit dialogue box simply generates the URL when you choose the certificate
from the dropdown box.
How do I set the URL for a report server SSL binding?
Cheers
Dan

Hi Charlie,
You are correct, i am configuring SSL connections on a native mode report server and i want to configure a custom URL for it.
However, my issue is not that I cannot see the certficate - it is that I cannot set a custom URL for SSL connections. Apologies, I should have written up an example of what I am seeing:-
I have installed a certificate for a.company.com. It shows up fine in the certificate list/dropdown for configuring the web service URL SSL certificate.
I can set a host header for non-SSL traffic for a.company.com and the binding succeeds. I can also set an SSL identity in the same Advanced Multiple Web Site Configuration window for a.company.com and this also binds correctly.
However, the certficate is like a wildcard in that it supports 4 more URLs in its subject alternate name property. I would like to set an SSL identity for b.company.com which is one of those entries.
As an aside, the certificate is also installed in IIS and succeeds in binding to b.company.com. I mention this as it shows that the certificate appears to be installed correctly and is working in its wildcard-like capacity.
I can also successfully set a host header for b.company.com for the report server for non-SSL traffic. It is b.company.com that I would like to host the report server and manager under.
The issue I have is that if I try to add an SSL identity for the report server web service for b.company.com using the Advanced Multiple Web Site Configuration window, there is no editable box for URL and so it does not allow me to set the URL/host
header - it therefore always binds to a.company.com.
I have scoured the boards for answers and there have been a couple of mentions, but neither has worked for me.
This one talks about adding the required
https://b.company.com/reportserver to the rsreportserver.config file and the OP describes the issue pretty much exactly as I am experiencing plus the responder talks about this guidance as coming from MS support - however when I followed the steps the result
is the same as without the configuration:-
http://www.sql-server-performance.com/forum/threads/ssrs-2008-host-headers-and-ssl.28571/
Another suggestion (for which I have lost the link) was to amend the URL config in that file directly and add the required entry. Both posters claim it has worked for them so I am sure that using a wildcard certificate with SSRS does work! I think in my
case I am missing some extra steps as it is fine to amend the config file directly, but I don't think this actually kicks off the SSL/URL binding process which is what the dialogue window does.
Hope this helps in explaining further. I am sure this is resolvable as I cannot believe the only option for SSRS is to bind to a single domain name and ignore the other wildcard/alternate options.
Cheers
Dan

How to implement MICR Fonts for AP Checks using XML Publisher

Hello -
We are upgrading from Oracle 11.5.9 to R12.1.1
I have created the RTF template for AP checks. Everything works except that now I have ti implement MICR fonts. Our earlier solution was through Optio, which I can not use now.
Please help me find necessary documentation to find ALL of the steps required to implement MICR fonts in the XMLP/RTF/PDF environment. Also, do we have to buy the fonts files, or are they available for free to download. We are using HP-UX 9000.
Thanks
Rajeev Goyal
Edited by: rajeevgoyal on Sep 17, 2009 10:14 AM

Using MICR in XMLP is like using any other special font (i.e. barcode). Please see below some link on how to have the fonts(MICR) working on your templates. Also, you could buy fonts but may want to try first on the MICR font shipped with the BI Publisher Desktop (i.e. C:\Program Files\Oracle\BI Publisher\BI Publisher Desktop\Template Builder for Word\fonts).
http://blogs.oracle.com/xmlpublisher/2006/06/how_to_install_a_font_using_xm.html
http://blogs.oracle.com/xmlpublisher/2007/05/barcoding_101.html
regards,..

Interpretation of values in log generated for auth checks(using RSECADMIN)

Hi experts
Could you please help me in reading the error log which is created using transaction RSECADMIN.My question is in particular about the interpretation of the values which occurs in front of the authorization relevant characteristics in the section "main checks" of the error log.
For example if I run a query , assumption(user is configured for auth. logs using rsecadmin and then finally when the query gets completed we see the authorization logs using rsecadmin only). Then in the log it shows what values were checked for the authorizations against authorized values/sets. Lets say there are 2 characteristics char1 and char2 which have hierarchies below them and I run a query with some values(any random nodes from hierarchy below char 1) for Char 1 and some values(any random nodes from hierarchy below char 2) for char2 in the query selection screen and after I run the query and see the log then below values are shown for log:
Authorization Check
Detail Check for InfoProvider <INFOPROV >
and then comes the section related to value checks ( MAIN CHECK)
Main Check
Subselection (Technical SUBNR) 1
Following Set Is Checked                           Comparison with Following Authorized Set
Characteristic | Contents                           Characteristics | Contents                                                                               result
Char 1           | Node 0 4 0                           Char 1           | All values of nodes for Char1 for which user is authorized.          Ok/NOK
                     | 121339 1
Char 2          | Node 3 1 98
                   | 121333 1                             Char 2                | All values of nodes for char 2 which user is authorized             Ok/NOK
Could you please help in getting how shall I interperate the values which are being checked.I mean how exactly should i get the characteristic values from the below shown values
Char 1           | Node 0 4 0
                     | 121339 1
Char 2          | Node 3 1 98
                   | 121333 1
I know that this might have some sids related to those values which are passed as nodes in the query selections but I am not sure how shall I get the values which are being passed for checks to the authorized set of values using above notification from sap.
Could you please help me so that I can find out what values are passed for checks .
I actually want to know how shall I use the values 0 4 0 121339 1 after the node for char 1 and 3 1 98 121333 after the node for char2.
The values for the authorized set can be knows as they are shown at the end of the log but nothing is said about the node values which are passed for being checked.
Please give me light on above so that i can use above informtion to find out what actually the user is not authorized for.
I hope I explained the requirement to best of levels but still if this is not clear , please let me know.It might be possible that while posting the question some lines get merged (apology for the same but i could not fine the best way to put the same here).
Thanks
Vishal

Hi Chandu
Thanks for reply. But using the transaction RSECPROT and seeing the log from the rsecadmin both are same as the main program related to both of them is RSEC_PROTOCOL_MAIN.
My question was related to this generated log only. I know that is in readable format but in log when you see what values are being checked against the authorized set then the part which is not clear to me is that what does the values in front of characteristic (for the node is selected as input value ( selection filter ) to see the data ) signifies.
Please see example above (as given by me) and please help in interpreation of those generated values in front of charactertistics char1 and char2 (if possible) .
Regards
Vishal

Get host and port to construct url for report call [SOLVED]

I'm calling reports via web.show_document and want to dynamically construct the URL based upon where the form is running.
I have sys_context('USERENV', 'HOST') for the host part.
How can I get the port?
Edited by: New Rodeo on Sep 19, 2008 12:32 PM

Storing the reports url in a db-table works for configurations with one ias, but in applications which are spread other more than one ias, all accessing the same db you may come into rouble.
We created a new entry in the [APPLICATION].env like REPORTSSERVER_URL=http://myhost:myport/reports/rwservlet?server=XYZ and then
read this in forms at runtime usinf TOOL_ENV-builtins.
hope this helps

Create url for displaying PDF using 'WDY_CONSTRUCT_URL'

From my webdynpro i want to display a pdf file, in de FM a url is constructed, does anybody know where i can change the fact a url is http or https.
CALL FUNCTION 'WDY_CONSTRUCT_URL'
    EXPORTING
      application         = 'ZHF_PDF'
      PARAMETERS          = lt_params
    IMPORTING
      out_url             = lv_url
    EXCEPTIONS
      invalid_application = 1
      OTHERS              = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

data out_host type string.
    data out_port type string.
    data out_protocol type string.
    call method cl_http_server=>if_http_server~get_location
          exporting
            server       = cl_wdr_task=>server
          importing
            host         = out_host
            port         = out_port
            out_protocol = out_protocol.
out_protocol will have 'HTTP' or 'HTTPS'

URL and Hostname of an entry in SLD do not show FQDN - ??

check out the screenshot here:
http://img247.imageshack.us/my.php?image=sldos0.jpg
All systems in our SLD look like that - they do not show fully qualified domain names for URL and Host. And I don't mean in the display of the hyperlink only, because the link target itself does not use FQDN either.
anyone know where SLD pulls the URL and Host info from??
Edited by: Jason Schweitzer on Mar 7, 2008 6:12 PM

I found the answer myself. The popup help wasn't working on my system because of weirdness on my laptop. After I rebooted the help properly displayed the answer.
SystemHome
The name of the computer system that is most important for the system. By convention, the database host name is used. In the Java environment, the value can be got from the system property SAPDBHOST. This property is a part of the compound name of class SAP_J2EEEngineCluster. By default, host names in SLD are written lower case without any network domain.
Maximum length: 64

How to get RSS feed url for site?

Is there a way to get the RSS feed url for a blog using Safari? I'm currently using FF for this since it is very simple. But that's about the only reason I use FF. Would be nice not to need two tools.
I don't want to subscribe to the site in Safari. I have an RSS Reader app that I plug the url into. I just want to see the url.

For some reason they removed that handy feature from Safari. But, there is an Extension called RSS Menu, which will add a button on your toolbar, giving you that function back.

Cannot download songs - Unable to check for purchases...

Hello everybody,
This week-end I tried to upgrade my library to iTunes Plus. Everything went fine.
But the problem is that I have 228 files to download, and I cannot do it, because iTunes tries to check for purchases... and then it stops by saying that it was unable to check for purchases.
I can connect to iTunes Stores, I can check my account, I can see all purchases I've done since the beginning of my account, I can do everything!
Except that iTunes does not allow me to download my files...
I have checked on my Mac OS X 10.5 iTunes... and in a Windows XP iTunes.
It's the same story.
I have put the topic on Windows, but Mac/Windows... same problem for me now...
Do you have any idea what is wrong? I suppose since Apple is doing many maintenance... they could have some issue with the Purchasing server.
Can you buy and download songs? Am I the only one with this problem?
Just to inform you, I've read all the info and contacted the Apple tech support, and except giving me all sort of "not usefull" tips like firewall check/download accelerator removal (which I don't have). Checking for error codes (I have no error code, just that he cannot check the purchasing server), ... and check the internet connection (which works for EVERYTHING except for this purchasing server!).
So any help would be great!
Thank you in advance!
Alessandro

I have a hunch it is something wrong on Apple's end with having 200+ downloads queued. Some other folks with hundreds of DLs were having this same problem.
What I would do, is contact iTS support and ask them to clear your DL queue so you can have fewer DLs wiating in line. THen when you get the first batch, go on to the 2nd batch.
The magic number mentioned in the other thread seemed to be 69 DLs....you could try searching for it.
Use the "Contact Us" button on this page and give them the URL of this topic you started
http://www.apple.com/support/itunes/store/download/

Using a variable to insert into a URL for redirecting clients

I got a good one, can anyone help on this?
Using RoboHelp Version 8.02.208.
My company uses MicroStrategy to deploy several web-based data analysis products.
Each of these data products (there are 5) are deployed on different servers.
I have set up a single source WebHelp project and use build tags for product specific help output.
(I also have to modify the Start Page, TOC and Default Topic settings prior to generating each product help)
Everything on this works fine and is not a problem.
We have just implemented an Excel add-in for one of the products.
That add-in uses a locally installed CHM file for its help.
In order to provide customized help that can be updated without forcing the clients to reinstall the CHM help file locally, the source for the CHM file has one dummy topic. In that topic, I have used HTML code to redirect the client to the WebHelp for the product and have integrated the Excel add-in help to that product’s customized help. The result is that the CHM file is opened locally in the HTML help viewer. Inside the HTML help viewer window, I open the WebHelp.
The redirect HARD CODES the URL with the product specific server name and Start Page help topic.
That works fine and is not a problem for ONE PRODUCT.
We are in the process of adding this Excel add-in to other products.
Now here is where I cannot get this to work with my implementation.
The URL for each product is different and to make matters worse, the Start Page is different for each product as well.
So, I am working on options for implementation of multiple products and here is my question:
(1)    The following is an example of the redirect in the single topic of the CHM file:
<meta http-equiv="refresh" content="0;URL=https://server.com/ProductName/WebHelp/StartPage.htm#mergedProjects/ExcelPlugIn/ Overview.htm" />
(2)    The red portion of the URL above will need to be modified to support each individual product with a custom server, product name and start page HTM file name.
Is there a way to:
(1)    Add a variable in this HTML code
(2)    Once the product is identified, update the variable with the product specific URL content
(3)    Integrate the variable into the target URL of the HTML code that does the redirect
I think this is either not possible or more work than needed. My other option is to provide standalone Excel add-in help on a server and just have the Excel plug-in go to that (right now it is integrated into the product specific help and the client has access to the plug-in help AND the application help all at the same place).
Thanks to all in advance for any help/suggestions.
Michael F Weart
[email protected]

Thanks for the feedback - here is more informtion on the challenges of this implementation:
I can only distribute one CHM file to cover all 5 web-based products that can be accessed through the Excel plug-in.
Regardless of which of our 5 products is used to install the plug-in on the client's local hard drive, the same installer is used.
That one CHM file is installed locally on the client's hard drive.
(The out of the box CHM file for the plug-in only has general plug-in help content the locl install causes problems for updating the content).
We needed to be able to easily update the help without inconveniencing the clients.
So, I am not creating 5 different CHM files for each installer, since there is only one installer regardless of how many of the 5 products they have.
The plug-in has a server setting and web service setting for each product and the client must choose which they are accessing when they fire up the plug-in.
They may be accessing the plug-in for any of our 5 web-based products they have subscriptions for.
Which means, the one CHM file must be able to:
(1) determine the product they are accessing
(2) direct to one of the 5 servers with the online help.
Each of the 5 online helps are deployed on separate servers with different URL links (and the helps have all different URL links as well).
These online webhelp outputs have some identical content but also some customized content for the specific product they are actually accessing.
My original approach was pretty much the same as William's above. Have a variable in the CHM help, determine the server they are accessing from the plug-in and insert the customized portion of the URL to access the appropriate webhelp.
Keep the ideas/suggestions coming.
I also have a development person looking into how to update a variable on the CHM side to populate the URL.
Michael F Weart
[email protected]

What is the correct firmware update check URL for a Westell VersaLink 327W?

Hi, I was wondering what the correct URL is for the modem to check for updated firmware on the Westell VersaLink 327w. My model is the D90-327W15-06 and its current firmware is 04.04.03
To clarify, I'm looking for the URL that goes in the box at the top of the upgrade page in the router's advanced settings. That link is a screenshot of what my page currently looks like.
Since I first got this modem 2 or 3 years ago, it has never been able to properly check for updates. I've tried changing the URL to point to the Verizon support page for manually downloading the firmware but that doesn't seem to work either. I'm guessing the URL should point to a specific file, possibly an xml or something? I don't remember what the original address in the box was but it didn't work anyway.
I'm pretty sure I am running the latest version (04.04.03) and manually upgrading isn't a problem if a new version comes out but its always bugged me that the built-in check has never worked right for me so I figured I'd ask on here for the heck of it. At the very least I'd like it to be able to check version information even if it can't upgrade automatically.
Does the built-in firmware check work for anyone else using the 327w or similar model? If so, could you kindly copy/paste the URL on your modem's firmware page? Even if you have a different modem, it might help me figure out the right address for my own. Thanks!

#1 Go to http://www.verizon.net/central/vzc.portal?_nfpb=true&_pageLabel=vzc_help_contentDisplay&linkflag=use...
#2 Make sure that use save as.
#3 After you save the file, go into your router's upgrade screen.
#4 Then use the file that you downloaded earlier to upgrade the router..
If you have any questions as how to do this..
#1 Be sure to take screen shots.
#2 And be sure that you use tinypic.com as your image host.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Cannot make a cache safe URL for "1025/styles/Themable/corev4.css", file not found. Please verify that the file exists under the layouts directory.

HI
i restored a sharepoint web 80 application in our test domain
and after when i browse the new web application
it says
Cannot make a cache safe URL for "1025/styles/Themable/corev4.css", file not found. Please verify that the file exists under the layouts directory.
adil

Hi adil,
According to your description, my understanding is that you encountered the error “Cannot make a cache safe URL for "1025/styles/Themable/corev4.css", file not found. Please verify that the file
exists under the layouts directory.” .
The issue happens in
We have customized master page
In the master page, we use path the script/style file like this: <SharePoint:CssRegistration name="<% $SPUrl:~SiteCollection/Style Library/coe/mainCOE.css%>"
runat="server"/>
While using the dynamic path in a multiple languages enabled site, language Id(1033 etc) will be added to the path automatically. That cause the file to be not found.
To solve the issue, please download the Arabic language pack http://www.microsoft.com/en-us/download/details.aspx?id=3411 ,
install it on your SharePoint and refresh your browser.
Reference:
http://sharepoint-community.net/profiles/blogs/cannot-make-a-cache-safe-url-for-1036-sytles-themable-corev4-css
Best Regards,
Eric
Eric Tao
TechNet Community Support

ALV check box in a cell uneditable for already checked entry

Hi all,
I have written program to display ALV with a column having check boxes.
I have requirement to make ALV-chech box in a cell uneditable for some other login for already checked entry.
Please guide me for the same..

Hi,
If it is list, try using events and then call it in reuse_alv_grid_display.
Sample code from SDN
**events
REFRESH:IT_EVENTS.
CLEAR:X_EVENTS,IT_EVENTS.
X_EVENTS-NAME = SLIS_EV_END_OF_LIST.
X_EVENTS-FORM = 'MODIFY_LIST'.
APPEND X_EVENTS TO IT_EVENTS.
CLEAR X_EVENTS.
END-OF-SELECTION.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
      I_CALLBACK_PROGRAM = SY-REPID
      IT_FIELDCAT        = IT_FIELDCAT
      IT_EVENTS          = IT_EVENTS
    TABLES
      T_OUTTAB           = ITAB
    EXCEPTIONS
      PROGRAM_ERROR      = 1
      OTHERS             = 2.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
FORM MODIFY_LIST.
data: l_lines type i.
describe table itab lines l_lines.
L_LINES = L_LINES + 3.
"because we have 3 lines extra occupied by lables.
"if we have header,i mean top of page add the no.of lines
"how many ever top of page have + 3 for labels.
DO L_LINES TIMES.
    read table it_chg with key INDEX = sy-index.
    if sy-subrc = 0.
**This code is for reading the out put line
**and modify accordinlg to our requiremnet.
**don't chnage this.
      READ LINE SY-INDEX INDEX SY-LSIND.
      IF SY-SUBRC = 0.
        MODIFY LINE SY-INDEX INDEX SY-LSIND
                   FIELD FORMAT ITAB-NAME INPUT.
      ENDIF.
    ENDIF.
ENDDO.
ENDFORM.                    "MODIFY_LIST

Authority check in infoset query for field with multiple entries

how can i perform the authority check in sq02 "at selection screen" for a multiple entry field
e.g. EKORG low 0001 - high 0005
or EKORG 0001, 0004, 0005
I already added the following statements
How the field for EKORG check must be filled
if EKORG is initial.
message 'Bitte Einkaufsorganisation wählen' TYPE 'E'.
endif.
AUTHORITY-CHECK OBJECT 'M_BEST_EKO'
ID 'ACTVT' FIELD '03'
ID 'EKORG' FIELD ?????.
IF sy-subrc = 4.
MESSAGE 'Keine Berechtigung für EKORG sy-subrc 4' TYPE 'E'.
ENDIF.

hi,
which event do you use for your coding ?
it must be AT SELECTION-SCREEN
A.

Could not execute auto check for display colors using command /usr/

I am trying to Install Oracle 10g R2 on Solaris X86 32 bit
I am connecting to system from my windows vista laptop through putty... I get the following error...
$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5.10. Actual 5.10
Passed
Checking Temp space: must be greater than 250 MB. Actual 1214 MB Passed
Checking swap space: must be greater than 500 MB. Actual 1799 MB Passed
Checking monitor: must be configured to display at least 256 colors
>>> Could not execute auto check for display colors using command /usr/openw
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,at which time they will be rechecked.
Continue? (y/n) [n] n
User Selected: No
Exiting Oracle Universal Installer, log for this session can be found at /tmp/Or
I have done the following:-
# DISPLAY=192.168.1.133:0.0; export DISPLAY
# echo $DISPLAY
192.168.1.133:0.0
# xhost+
xhost+: not found
# xclock
xclock: not found
I know that I have to do the following:-
1. Install SUNWxwplt package ========> Is already Installed
2. Set DISPLAY variable
3. Execute xhost + on target (set in DISPLAY) computer
# pkginfo -i SUNWxwplt
system SUNWxwplt X Window System platform software
Some sites claim xming and some xwindows etc.... Plz give me a step by step instruction as how to overcome this..
bash-3.00# /usr/openwin/bin/xclock
Error: Can't open display:
bash-3.00# DISPLAY=192.168.1.133:0.0; export DISPLAY; echo DISPLAY
DISPLAY
bash-3.00# echo $DISPLAY
192.168.1.133:0.0
bash-3.00# /usr/openwin/bin/xclock
Error: Can't open display: 192.168.1.133:0.0
bash-3.00# pwd
bash-3.00# find . -name xhost
./usr/openwin/bin/xhost
^C
bash-3.00# /usr/openwin/bin/xhost +
/usr/openwin/bin/xhost: unable to open display "192.168.1.133:0.0"
bash-3.00#
# echo $PATH
/usr/sbin:/usr/bin
I have also gone through the below ... but was not of much help
Unable to execute runInstaller: Check if the DISPLAY variable is set
Plz help
Edited by: [email protected] on Feb 11, 2009 5:16 AM

bash-3.00# echo $SHELL
/sbin/sh
bash-3.00# echo $DISPLAY
bash-3.00# DISPLAY=192.168.1.133:0.0;export DISPLAY
bash-3.00# echo $DISPLAY
192.168.1.133:0.0
bash-3.00# /usr/openwin/bin/xclock
Error: Can't open display: 192.168.1.133:0.0
bash-3.00# man xclock
No manual entry for xclock.
bash-3.00# /usr/openwin/bin/xhost +
/usr/openwin/bin/xhost: unable to open display "192.168.1.133:0.0"
bash-3.00#

Cannot construct URL for runtime check using entries in SLD

Similar Messages

Maybe you are looking for