Cannot convert character sets for one or more characters Error message
Hello,
I am getting this error message "Cannot convert character sets for one or more characters" when i try to transfer the data from Application server file as CSV to PSA.
Using T-code AL11
Under SAP Directory I open my file I can able to see all contents of my file right?
But i can't able to see all my data because of this I am getting ths error message?
I am loading Master data attribute
Is there any limitation on record length?
Please share your thought..
Thansk
Which length should not exceed 60.
When i load the same file from local workstation I can able to load no error message
Why I am getting if i load same file from application server?
Thanks
Similar Messages
-
Cannot convert character sets for one or more characters
Hello,
Issue:
Source File: Test.csv
Source file dropped on application server as csv file via FTP
Total records in csv file 102396
I can able to load only 38,000 records after that I am getting error message " convert character sets for one or more characters" while loading into PSA .
If i load same csv file from local workstation I am not getting any error message I can able to load total 102396 records.
I am guessing while FTP the file into Application server some invalid codes adding?
But I am FTP 7 files, out of 7 I am unable to load only 1 file.
Anybody have faced this kind of problem please share with me I will assign full points
ThanksI checked lower case option for all IO
When i checked the PSA failed log no of records processed is "0 of 0" my question is with out processing single record system is througing this error message.
When i use same file loading from local workstation no error message
I am thinking when I FTP the file from AS/400 to BI Application Server(Linex) some invalid characters are adding but how can we track that invalid char?
Gurus please share your thoughts on this I will assign full points.
Thanks, -
Flat File Load Issue - Cannot convert character sets for one or more charac
We have recently upgraded our production BW system to SPS 17 (BW SP19)
and we have issues loading flat files (contain Chinese, Japanese and
Korean characters) which worked fine before the upgrade. The Asian
languages appear as invalid characters (garbled) as we can see in PSA. The Character Set
Settings was previously set as Default Setting and it worked fine until
the upgrade abd we referred to note 1130965 and with the code page 1100
the load went through (without the Cannot convert character sets for one or more characters error) however the Asian language characters will appear
as invalid characters. We tried all the code pages suggested in the note e.g.
4102, 4103 etc on the info packages but it did not work. Note that the
flat files are encoded in UTF-8.I checked lower case option for all IO
When i checked the PSA failed log no of records processed is "0 of 0" my question is with out processing single record system is througing this error message.
When i use same file loading from local workstation no error message
I am thinking when I FTP the file from AS/400 to BI Application Server(Linex) some invalid characters are adding but how can we track that invalid char?
Gurus please share your thoughts on this I will assign full points.
Thanks, -
Convert character sets for one or more characters
Hello,
Issue:
Source File: Test.csv
Source file dropped on application server as csv file via FTP
Total records in csv file 102396
while loading into PSA I can able to load only 38,000 records after that I am getting error message " convert character sets for one or more characters" .
If i load same csv file from local workstation I am not getting any error message I can able to load total 102396 records.
Anybody have faced this kind of problem please share with me I will assign full points
ThanksHi,
check
Flatfile Issue
Regards,
Arek -
I have updated to the lastest OS on my IPad3. No problem there. Then found I could no longer access my Itunes as there was a message 'Cannot be used as it requires version 10.6.3 or later. Go to ... and download'. I have tried four times and it won't work. I get another message saying I must sign in as administrator or contact my system administrator. I am the only one who uses this PC and have no idea what my administrator password is. Now I cannot use ITunes. Please help if you can. Thank you. Eileen Frost
Many thanks diesel. I cannot remember ever having an administrator password. Looks like I shall have to do a restore on my PC and not bother with the updates. Or maybe I could find my password from somewhere ? When I went into control panel I found a box with administrator and my name and it said password protected so I must have had one at some time. Any ideas on how I could find it ? Many thanks anyway. I always use a password to sign on but obviously that is not it. Eileen
-
Problem in material extension- material is blocked for one or more plant
Hi,
I am extending material from one plant to another plant but when i reach in accounting 1 deta system shows error material is blocked for one or more plant.
Message no. M3562
Diagnosis
You wanted to make a change in the material master record which requires that the master record is blocked in all plants.
A change of this kind includes, for example, the entry of a valuation type that allows single batch valuation, or changing of the batch management requirement if the batches have a cross-plant definition in your system.
System Response
The change required cannot be made until the material can be blocked by the current transaction in all plants
How to solve it. Please guide me..Hi Nitesh,
From the error desc it appears you are making a change that has an impact on more than one plant. probably while extending you are trying to change a value for the new plant where the extension is being made.
make sure if this change is needed, its blocked in the plants for the field which has a diff value. you might have to modify the value of the field causing diff across the other plants also to make it uniform.
regards
sadhu kishore -
Hi!
We have fatal or critical error message on Microsoft Intune Portal but all agents are working just fine. Before opening support ticket we would like to hear comments from the experts on this forum. We would also like to fix this error before starting to
manage mobile devices with Intune.
Error message on Intune Portal:
"Microsoft Intune was unable to set the desired mobile device policy for one or more users due to the following error: A2CE0100"
Repeated: 19 times.
Class: (System) Policy
Random Fatal error message on C:\Program Files\Microsoft\OnlineManagement\Logs\PolicyAgent.log found from one Windows 8.1 client:
2015-02-21 08:49:20:704 2852 1ab0 FATAL: DocumentProvider::IndicateToConsumer/pp->ProcessPolicies(NULL, NULL, NULL, NULL) failed with error 0x800704d5.
That said, we are not facing any specific problem but we would like to find symptom of this repeating error message on Intune Portal . We would appreciate to get any thoughts about this case.
Br.
JukkaHi Jukka,
Mobile policy doesn't apply to clients using the Full Client download. Please open a support case so the team can assist in further troubleshooting.
Thanks,
Jon L. - MSFT - This posting is provided "AS IS" with no warranties and confers no rights. -
I have pdf files in European languages and want to be able to enter non-English characters in the "find" function. How does one install other character sets for use with Acrobat Pro XI?
Have you tried applying the update by going to Help>Updates within Photoshop Lightroom? The update should be using the same licensing? Did you perhaps customize the installation location? Finally which operating system are you using?
-
Will print more than one copy when set for one copy,
prints whole page including the folder list on the left and the adverts on the rtght which overlap the email text,
also print multiple copies even when set for one copyHi there @HoundDog4
Welcome to the community
I will certainly do my best to help you with the printing issues you're facing! However, I am going to ask that you please let me know some more helpful information to help me research the problem for you.
Please respond to me with the following. If there are any steps here that you have not tried, please try them before responding and include the result:
What printer(s) are installed on the computer?
How is the printer connected (USB/ wireless/ wired/ Bluetooth)?
What is the Operating System of the computer?
Have you tested hardware functionality (made copies from the printers front panel)?
Have you tried printing from different programs?
Have you tried uninstalling and reinstalling the software?
If you're running Windows, run the Print and Scan Doctor and include the results.
Did you make any recent changes to your set up (physical move, upgrade, downgrade, new software installed, new router, etc)?
Is the printer plugged directly into the wall outlet (avoiding power bars and surge protectors)?
Have you completed all Windows/Mac OS Updates?
Have you tried using a different USB/Ethernet cable?
Thank you!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
Expdp with network_link and different character sets for source and target?
DB versions 10.2 and 10.1
Is there any limitation for implementing expdp with network_link but target and source have different character sets?
I tried with many combinations, but only had success when target and source have the same character sets. In other combinations there was invalid character set conversion (loose of some characters in VARCHAR2 and CLOB fields).
I didn't find anything on the internet, forums or Oracle documentation. There was only limitation for transportable tablespace mode export (Database Utilities).
ThanksHi DBA-One
This link
http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14215/dp_overview.htm#CEGFCFFI
is from Database Utilities 10g Release 2 (10.2) (I read it many times)
There is only one thing about different character sets.
I quote:
Data Pump supports character set conversion for both direct path and external tables. Most of the restrictions that exist for character set conversions in the original Import utility do not apply to Data Pump. The one case in which character set conversions are not supported under the Data Pump is when using transportable tablespaces.
Parameter VERSION also doesn't play role here, because the behaviour (character set) is the same if I use for target and source only 10.2 or (10.2 and 10.1) respectivly. -
Hello everyone :
I can't switchover to primary. following is error and information.
RHEL 6.3 x86-64
Oracle database 11.2.0.3.0 Enterprise edition
Primary database = orclprmy
Standby database = orclstby1
##### /etc/hosts on orclstby1
[root@orclstby1 admin]# cat /etc/hosts
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
192.168.50.211 ttprmy
192.168.50.212 orclstby1
### DG broker error
DGMGRL for Linux: Version 11.2.0.3.0 - 64bit Production
Copyright (c) 2000, 2009, Oracle. All rights reserved.
Welcome to DGMGRL, type "help" for information.
Connected.
DGMGRL> show configuration;
Configuration - TTDGConfig1
Protection Mode: MaxPerformance
Databases:
orclstby1 - Primary database
Error: ORA-16778: redo transport error for one or more databases
orclprmy - Physical standby database
Fast-Start Failover: DISABLED
Configuration Status:
ERROR
DGMGRL>
########### listener.ora on orclstby1
[root@orclstby1 admin]# cat listener.ora
# listener.ora Network Configuration File: /u2/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = orclstby1)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME=orcl)
(SID_NAME = orclstby1)
(ORACLE_HOME = /u2/oracle/product/11.2.0/dbhome_1)
(SID_DESC =
(GLOBAL_DBNAME=orclstby1)
(SID_NAME = orclstby1)
(ORACLE_HOME = /u2/oracle/product/11.2.0/dbhome_1)
(SID_DESC =
(GLOBAL_DBNAME=orclstby1_DGMGRL)
(SID_NAME = orclstby1)
(ORACLE_HOME = /u2/oracle/product/11.2.0/dbhome_1)
ADR_BASE_LISTENER = /u2/oracle
############## tnsnames.ora on orclstby1
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.212)(PORT = 1521))
(CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orcl))
orclprmy =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.211)(PORT = 1521))
(CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orclprmy))
orclprmy_DGMGRL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.211)(PORT = 1521))
(CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orclprmy_DGMGRL))
orclstby1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.212)(PORT = 1521))
(CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orclstby1))
orclstby1_DGMGRL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.212)(PORT = 1521))
(CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orclstby1_DGMGRL))
##### alert log on orclstby1.
Fatal NI connect error 12504, connecting to:
(DESCRIPTION=(CONNECT_DATA=(SERVICE_NAME=)(CID=(PROGRAM=oracle)(HOST=orclstby1)(USER=oracle)))(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.50.211)(PORT=1521)))
VERSION INFORMATION:
TNS for Linux: Version 11.2.0.3.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 11.2.0.3.0 - Production
Time: 06-SEP-2013 13:19:55
Tracing not turned on.
Tns error struct:
ns main err code: 12564
TNS-12564: TNS:connection refused
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
There is problem in alert log.
In the /etc/hosts file. The standby server (orclstby1) ip is 192.168.50.212. but alert log is 192.168.50.211.
Is any idea?
Thanks for help.
消息编辑者为:user4914135#### on primary database
SQL> select dest_name,status,target,archiver,schedule, valid_type,valid_role,db_unique_name,error from v$archive_dest;
DEST_NAME STATUS TARGET ARCHIVER SCHEDULE VALID_TYPE VALID_ROLE DB_UNIQUE_NAME
ERROR
LOG_ARCHIVE_DEST_1 VALID LOCAL ARCH ACTIVE ALL_LOGFILES ALL_ROLES orclprmy
LOG_ARCHIVE_DEST_2 VALID REMOTE LGWR PENDING ALL_LOGFILES PRIMARY_ROLE orclstby1
LOG_ARCHIVE_DEST_3 INACTIVE LOCAL ARCH INACTIVE ALL_LOGFILES ALL_ROLES NONE
#### on standby database
SQL> select dest_name,status,target,archiver,schedule, valid_type,valid_role,db_unique_name,error from v$archive_dest;
DEST_NAME STATUS TARGET ARCHIVER SCHEDULE VALID_TYPE VALID_ROLE DB_UNIQUE_NAME
ERROR
LOG_ARCHIVE_DEST_1 VALID PRIMARY ARCH ACTIVE ALL_LOGFILES ALL_ROLES orclstby1
LOG_ARCHIVE_DEST_2 ERROR STANDBY LGWR PENDING ONLINE_LOGFILE PRIMARY_ROLE orclprmy
ORA-12504: TNS:listener was not given the SERVICE_NAME in
CONNECT_DATA
LOG_ARCHIVE_DEST_3 INACTIVE PRIMARY ARCH INACTIVE ALL_LOGFILES ALL_ROLES NONE
#### log_archive_dest on primary database
SQL> show parameter log_archive_dest
NAME TYPE VALUE
log_archive_dest string
log_archive_dest_1 string location=/u3/arch/orcl vali
d_for=(ALL_LOGFILES,ALL_ROLES)
db_unique_name=orclprmy
log_archive_dest_10 string
log_archive_dest_11 string
log_archive_dest_12 string
log_archive_dest_13 string
log_archive_dest_14 string
log_archive_dest_15 string
log_archive_dest_16 string
log_archive_dest_17 string
log_archive_dest_18 string
log_archive_dest_19 string
log_archive_dest_2 string service="orclstby1", LGWR ASYNC
NOAFFIRM delay=0 optional comp
ression=disable max_failure=0
max_connections=1 reopen=300 d
b_unique_name="orclstby1" net_ti
meout=30, valid_for=(all_logfi
les,primary_role)
log_archive_dest_20 string
log_archive_dest_21 string
log_archive_dest_22 string
#### log_archive_dest on standby database
SQL> show parameter log_archive_dest
NAME TYPE VALUE
log_archive_dest string
log_archive_dest_1 string location=/u3/arch/orclstby1 vali
d_for=(ALL_LOGFILES,ALL_ROLES)
db_unique_name=orclstby1
log_archive_dest_10 string
log_archive_dest_11 string
log_archive_dest_12 string
log_archive_dest_13 string
log_archive_dest_14 string
log_archive_dest_15 string
log_archive_dest_16 string
log_archive_dest_17 string
log_archive_dest_18 string
log_archive_dest_19 string
log_archive_dest_2 string service=orclprmy ASYNC valid_for
=(ONLINE_LOGFILE,PRIMARY_ROLE)
db_unique_name=orclprmy
log_archive_dest_20 string
log_archive_dest_21 string
log_archive_dest_22 string
log_archive_dest_23 string
log_archive_dest_24 string
log_archive_dest_25 string
#### spfile on standby database
</u2/oracle/product/11.2.0/dbhome_1/dbs> strings spfileorclstby1.ora
orcl.__db_cache_size=1040187392
orclstby1.__db_cache_size=1090519040
orcl.__java_pool_size=16777216
orclstby1.__java_pool_size=16777216
orcl.__large_pool_size=16777216
orclstby1.__large_pool_size=16777216
orcl.__oracle_base='/u2/oracle'#ORACLE_BASE set from environment
orclstby1.__oracle_base='/u2/oracle'#ORACLE_BASE set from environment
orcl.__pga_aggregate_target=536870912
orclstby1.__pga_aggregate_target=536870912
orcl.__sga_target=1610612736
orclstby1.__sga_target=161061273
orcl.__shared_io_pool_size=0
orclstby1.__shared_io_pool_size=0
orcl.__shared_pool_size=503316480
orclstby1.__shared_pool_size=469762048
orcl.__streams_pool_size=16777216
orclstby1.__streams_pool_size=0
*.archive_lag_target=0
*.audit_file_dest='/u2/oracle/admin/orclstby1/adump'
*.audit_trail='db'
*.compatible='11.2.0.0.0'
*.control_files='/u2/oracle/oradata/orclstby1/control01.ctl','/u2/oracle/fast_recovery_area/orclstby1/control02.ctl'
*.db_block_size=8192
*.db_domain=''
*.db_file_nam
e_convert='orcl','orclstby1'
*.db_name='orcl'
*.db_recovery_file_dest='/u2/oracle/fast_recovery_area'
*.db_recovery_file_dest_size=5218762752
*.db_unique_name='orclstby1'
*.deferred_segment_creation=FALSE
*.dg_broker_start=TRUE
*.diagnostic_dest='/u2/oracle'
*.fal_client='orclstby1'
*.fal_server='orclprmy'
*.log_archive_config='dg_config=(orclprmy,orclstby1)'
*.log_archive_dest_1='location=/u3/arch/orclstby1 valid_for=(ALL_LOGFILES,ALL_ROLES) db_unique_name=orclstby1'
*.log_archive_dest_2='ser
vice=orclprmy ASYNC valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=orclprmy'
*.log_archive_dest_state_2='ENABLE'
orcl.log_archive_format='orcl_%t_%s_%r.arc'
*.log_archive_format='orclstby1_%t_%s_%r.arc'
orclstby1.log_archive_format='orclstby1_%t_%s_%r.arc'
*.log_archive_max_processes=4
*.log_archive_min_succeed_dest=1
orcl.log_archive_trace=0
orclstby1.log_archive_trace=0
*.log_file_name_convert='orcl','orclstby1'
*.open_cursors=300
*.pga_aggregate_target=536870912
*.processes=
1500
*.remote_login_passwordfile='EXCLUSIVE'
*.sessions=1655
*.sga_target=1610612736
*.standby_file_management='AUTO'
*.undo_tablespace='UNDOTBS1'
</u2/oracle/product/11.2.0/dbhome_1/dbs>
Thank you for your help. -
Multiple Character set for NLS
Hi,
I'm using Oracle 8i database. Is it possible to set the different character set for the database? The requirement is to support the two different character set data, one (main) Japanese character set and other Simplified Japanese. Or is there any other way in which i can store these data (Japanese & Chinese)?
Thanks & Regards,
JayeshPlease don't get me wrong. Currently it is set in the windows database. I did not set nls_lang at the command prompt before import into windows. However nls_lang is already set and it is character set WE8ISO8859P1 the same as the value I specified in creation script, besides the other two values AMERICAN, AMERICA. They are now same in both solaris and windows. Only the character sets are different because I specified a different one. So, is it ok or do I now need another fresh import this time with nls_lang set to AMERICAN_AMERICA.UTF8 ?
-
May i use nls_charset12 to convert character set before executeQuery()?
i got a problem for the db nls character set
isn't us7ascii, so while retreiving data from database the data stored in ResultSet is changed to UTF-8 format. thus, my question is - how to convert character set before my executuing the method
executeQuery() or any other methods would be appreciated.
thanks in advice,This is Tommy. I saw your post on Oracle Forum. Can you give me the classes12.zip, classes12_g.zip, and nls_charset12.zip ?!
Thx in advance !!
Tommy fromTaiwan ( July 3, 2001 ) -
I'm using Firefox 3.6.17, and have installed Rikaichan 2.02. Once I've installed the Japanese-English dictionary, I then click on Rikaichan to get it started, and it always gives a "Javascript Application" error:
'''"The index for one or more dictionaries needs to be created. This may take a while on slower computers"'''
Rikaichan always works fine on my laptop, but I just can't seem to install it properly at work. Is there some sort of office security screwing it up?venicespent,
Boot into your Mavericks Recovery partition by hold down the command and R keys whilst booting. You'll see a screen that looks like this:
Click on the Disk Utility item to open Disk Utility. You should see your boot drive (usually named "Macintosh HD" unless you've changed it) in the column on the left of the screen. Select your boot partition and click on the "Verify" button. Let your Mac do it's thing - if you get green text telling you that everything seems to be OK, then your disk should not be damaged. If, however, you get red text telling you that the disk needs to be repaired, click on the "Repair" button. If the disk can be repaired, you should be good to go. If the disk cannot be repaired then the drive is damaged.
But before you do anything, make certain that you have backups!!!
Clinton
MacBook Pro (15-inch Late 2011), OS Mavericks 10.9.4, 16GB RAM, 960GB SSD, 27” Apple Thunderbolt Display -
Item cost not found for one or more items - Inventory Posting
Good Day Mentors,
My user has encountered an error during Inventory Posting and its "Item cost not found for one or more items".
The specific Message ID from SAP's System Message Log is 10001287.
I found a similar post which addresses this error here.
But unfortunately it did not help me solve my user's problem.
I already checked if the items had a defined "Item Cost" in the Item Master Data Inventory Tab, and they all have "Item Cost" defined.
I'm not sure if this will help, but below is the Inventory Audit Report of one of the items that is throwing the "Item cost not found" error.
I am not a business consultant neither am I literate in accounting, so thanks for the patience.
SAP Version: 9.0 PL5
Valuation Method: Moving Average
Thanks in advance!
SeanHi Augusto and Raviraj,
I've already verified in our production database the points you made:
- Is the "Manage Item cost per warehouse" selected in the Basic Initialization Screen?
YES
- Is the "Manage Inventory by Warehouse" ticked/checked in the "Inventory Data" tab of the "Item Master Data" screen?
YES
* I apologize for not have been able to give this information upfront.
Anyway, the database only has one warehouse at the moment.
I've checked the items, like the item in the screen shot above, and it does have an item cost.
Below is the screenshot of the sample item from my original post,
Thanks in advance!
Sean
Maybe you are looking for
-
Checkpoint Not Complete in NOARCHIVELOG mode
Hi, This is first time I am seeing this. In my 11.1.0.7 development database on SOLARIS, I see checkpoint not complete message in alert log file and my database is running in NOARCHIVELOG mode. Can any expert throw light on this that why this warning
-
RAM... Leopard and Adobe CS3
hello ive recently purchased a new 2.4 macbook pro... maxed it out to 4GB ram with a 7200 rpm drive! running leopard and the adobe creative suite 3 master collection! Question 1) my computer tells me that i have 4GB of ram, but photoshop / after effe
-
How to know the account group of an customer?
as title, thnaks for your help.
-
Could you play a live stream from safari to apple tv without going through itunes?
could you play a live stream from safari to apple tv without going through itunes?
-
i need to declare a remote cursor in a when button pressed trigger declare cursor cursor_name is select statement .... from table@remote database begin open the cusror select statement insert locally end; q: how can i declare it