Cannot create new virtual network adapter on logical switch team

I am currently moving from Hyper-V 2012 to Hyper-V 2012 R2 and in turn I have just installed SCVMM 2012 R2. I am using SCVMM 2012 R2 to create some NIC teams which I have done no problem in the past with SCVMM 2012 SP1. Now we have everything set up just
like we did in the past and it seems to create the NIC team just fine. The problem is when I try to create a New Virtual Network Adapter, when I click the button, it immediately says:
VMM cannot create the virtual network adapter. Either there are no VM networks associated with the network sites that the uplink port profile "Logical Network Name" Connects to, or the VM networks associated with those network sites all use Hyper-V
network virtualization.
Now I've checked and the VM Network is assigned to the logical network that is associated with the Network Site that contains the host I'm working with. I've also tried disabling Hyper-V network virtualization but that didn't change anything and I thought
that it's always enabled on 2012 R2 anyway.
I would like to gain network connectivity to this team at least for testing purposes and we also are planning on building a Hyper-V cluster. Were some new restrictions added in 2012 R2 to prevent creating virtual network adapters in this scenario or am I
doing something wrong?
Any information would be helpful. Thank you in advance for your time!

Hi Sir,
Glad to hear that the problem has been solved , thanks for your sharing .
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Similar Messages

  • Network Gurus: How to create a "virtual" network adapter?

    We have an older Xserve (G4) with dual ethernet ports, running OS X Server 10.4 and FileMaker Server 5.5. One of the ethernet ports is connected to an internal network (behind the firewall), the other to an external network (in front of the firewall). There are appropriate IP addresses on each port. Thing is, I need FileMaker Server to be able to serve databases on BOTH network ports and it doesn’t seem to be capable. There’s a “preferred IP address” setting which lets me select the internal or external addresses, but not both.
    Is there a way to create a "virtual" network adapter that I can point FileMaker Server to, but have all traffic from both ethernet ports go through this "virtual" adapter? Sort of like a 'software router'?

    IMHO, a far, far better solution would be to turn on the VPN server built-into your Mac OS X Server.
    That way remote users can connect to the VPN (automatically, even) and get assigned an IP address in the internal network. You gain a high degree of security knowing that only known, trusted external users can access your database. If you do configure Filemaker to listed on your public interface you have no practical way of preventing rogue users from accessing your data.
    Since your server already has the VPN server installed, and any modern (or even semi-modern) client should be able to connect to it, I wouldn't look any further.

  • Virtual Network Adapter (vEthernet) unauthenticated

    Hi, 
    I have a problem, with configuring a Virtual Network Adapter on SC VMM. 
    I created a logical switch with two physical network adapter (team) and add a virtual network adapter to the logical switch. After that a virtual network adapter will be created on the hyper-v host, but with the status "domain.local (unauthenticated).
    With another hyper-v host it work without problems. 
    I tried to remove and recreate all that stuff but without success. 
    Do someone know that problem? Or can help to find a solution? 
    Thank you for the help.
    Br, 
    Andi

    Hi Sir,
    I searched for this issue but it seems  none fits your case :
    https://social.technet.microsoft.com/Forums/windows/en-US/ca343a3c-c61e-4816-9a96-d973386db2e2/network-shows-as-unauthenticatedchanged-my-network-profile-to-public
    Did you try to manually configure teaming on that hyper-v host , still same result ?
    Best Regards,
    Elton Ji
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

  • Is there a way to create a virtual network using C# and the Azure SDK/API?

    I don't see a clear way to create an Azure Virtual Network using the SDK.
    I have all the methods to create the virtual network configuration, but no way to submit it:
    IList<string> VirtualNetworkAddressPrefixes = new List<string>();
    IList<string> LocalNetworkAddressPrefixes = new List<string>();
    IList<NetworkListResponse.DnsServer> DNSServers = new List<NetworkListResponse.DnsServer>();
    IList<NetworkListResponse.Subnet> Subnets = new List<NetworkListResponse.Subnet>();
    NetworkListResponse.Gateway Gateway = new NetworkListResponse.Gateway();
    IList<NetworkListResponse.LocalNetworkSite> LocalSites = new List<NetworkListResponse.LocalNetworkSite>();
    IList<NetworkListResponse.Connection> Connections = new List<NetworkListResponse.Connection>();
    VirtualNetworkAddressPrefixes.Add("a.b.c.d/cidr");
    DNSServers.Add(new NetworkListResponse.DnsServer() { Name = "TestDNS1", Address = "a.b.c.d" });
    Subnets.Add(new NetworkListResponse.Subnet() { Name = "Subnet-1", AddressPrefix = "a.b.c.d/cidr" });
    Subnets.Add(new NetworkListResponse.Subnet() { Name = "GatewaySubnet", AddressPrefix = "a.b.c.d/cidr" });
    Connections.Add(new NetworkListResponse.Connection() { Type = LocalNetworkConnectionType.IPSecurity });
    LocalNetworkAddressPrefixes.Add("a.b.c.d/cidr");
    LocalSites.Add(new NetworkListResponse.LocalNetworkSite()
    Name = "On-Prem",
    Connections = Connections,
    VpnGatewayAddress = "a.b.c.d",
    AddressSpace = new NetworkListResponse.AddressSpace() { AddressPrefixes = LocalNetworkAddressPrefixes }
    Gateway.Sites = LocalSites;
    Gateway.Profile = GatewayProfile.ExtraLarge;
    NetworkManagementClient netMgmtClient = new NetworkManagementClient(CloudCredentials);
    NetworkListResponse netlistresp = GlobalSettings.mainWindow.netMgmtClient.Networks.List();
    netlistresp.VirtualNetworkSites
    .Add(new NetworkListResponse.VirtualNetworkSite()
    Name = "TestVirtualNetwork",
    AddressSpace = new NetworkListResponse.AddressSpace() { AddressPrefixes = VirtualNetworkAddressPrefixes },
    DnsServers = DNSServers,
    Subnets = Subnets,
    AffinityGroup = "East US",
    Gateway = Gateway,
    Label = "LabelValue"
    I have also created the entire XML response and sent it to the NetworkManagementClient -> Networks.SetConfiguration() method, but it appears this command expects the virtual network to already be in existence. If anyone could give guidance, it would be
    appreciated.

    Hi,
    As discuss above , we have to create the XML response  ,before that first you have to
    GetConfiguration() details of existing virtual network. 
    string.format("@<NetworkConfiguration xmlns:xsd='http://www.w3.org/2001/XMLSchema' xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance' xmlns='http://schemas.microsoft.com/ServiceHosting/2011/07/NetworkConfiguration'>
                <VirtualNetworkConfiguration>
                <Dns />
                <VirtualNetworkSites>
                <VirtualNetworkSite name=""{0}"" Location=""{1}"">
                <AddressSpace>
                <AddressPrefix>10.0.0.0/8</AddressPrefix>
                </AddressSpace>
                <Subnets>
                <Subnet name=""Subnet-2"">
                <AddressPrefix>10.0.0.0/11</AddressPrefix>
                </Subnet>
                </Subnets>
                </VirtualNetworkSite>",Networkname,location)+(@"<VirtualNetworkSite name=""demodsf1"" Location=""West Europe"">
            <AddressSpace>
              <AddressPrefix>10.0.0.0/8</AddressPrefix>
            </AddressSpace>
            <Subnets>
              <Subnet name=""Subnet-1"">
                <AddressPrefix>10.0.0.0/11</AddressPrefix>
              </Subnet>
            </Subnets>
          </VirtualNetworkSite>  </VirtualNetworkSites>
                </VirtualNetworkConfiguration>
                </NetworkConfiguration>")
    you have to append the node for existing node with new values , i got it its adding new virtual network 
    Best regards,

  • Help! New Virtual Network not showing up in list of networks....

    I am attempting to move a current vm in one virtual network to a new virtual network. I am at the step in the process where I will create a new virtual machine with the disks of the deleted VM from the original virtual network. I am unable to choose the
    new virtual network name under Choose Affinity Group or Virtual Network. It is not listed.....Any advice???? I am able to see the virtual network lsited on the portal under Virtual networks

    Hey,
    Did you follow all the processes in moving to a different Network?
    Here are two links to aid you:
    1. You can do it via GUI:
    http://blogs.msdn.com/b/karldb/archive/2013/12/13/moving-an-existing-virtual-machine-into-a-virtual-network-subnet-without-losing-your-virtual-hard-disk-or-your-mind.aspx
    2. Or via powershell
    https://msdn.microsoft.com/en-us/library/azure/dn643636.aspx?f=255&MSPPError=-2147217396
    Good luck
    Cheers
    Amjad

  • How to create azure virtual network by programming

    Hi everyone
    i want to create azure virtual network by programming
    Doese anyone know how?
    My way is create xml network config
    and then call powershell
    Set-AzureVNetConfig-ConfigurationPath
    But if on manage portal is exist any network
    It is impossible to create new azure virtual network
    Thank in advance,
    QP

    Hello pham van quyen,
    I am assuming that you are downloading the XML file from the portal and then editing it before you create the Virtual Network. You should be able to create a virtual network by using the set-azureVNETconfig command. But if you are connecting a gateway, please
    use the Set-AzureVNetGateway.
    I would suggest you to follow this tutorial that will give you information on Windows Azure Network using PowerShell:
    http://blogs.technet.com/b/kevinremde/archive/2013/01/19/create-a-windows-azure-network-using-powershell-31-days-of-servers-in-the-cloud-part-19-of-31.aspx
    If you are having issues with this, please let me know the related errors or failures.
    Thanks,
    Syed Irfan Hussain

  • How to install microsoft hosted virtual network adapter

    I have a HP 20- A225IN windows 8.1 All in one PC
    I accidentally uninstall the Microsoft hosted virtual network adapter from Network Adapters under Device Manager.
    please tell me how to install this adapter again?

    I have a video that covers the steps to install the Microsoft Loopback Adapter in Windows 7.  Hope this helps...
    http://www.youtube.com/watch?v=R9674zGHxrE
    Guides and tutorials, visit
    ITGeared.com.

  • Cannot create new folders in Outlook

    I just bought a new PC computer.  I installed MSFT Office Professional Plus 2010.  I opened Outlook and added in (i) the pst folder I had set up from my previous Vista
    computer (also with Outlook 2010), (ii) my hotmail account, (iii) my at&t/yahoo account and (iv) my gmail account.  I cannot create new folders in any of them.
    When I right click anywhere in the navigation pane and select "New Folder..." I get the following error message:
    "Outlook cannot read the registry information.
    -Close and restart Outlook.
    -Reinstall Outlook
    -Reinstall Microsoft Exchange or other e-mail system."
    I tried all three, including removing and reinstalling Office and removing all of the email accounts/pst files and re-adding and still have the problem.
    If I try to right-click properties on any of the accounts, I get the same error message, with the following additional language first:
    "Cannot display 'General' page. This page will remain visible, but is not available."
    Not sure what is left to try.
    Appreciate any ideas.

    Hi
    Thank you for using
    Microsoft Office for IT Professionals Forums.
    From your description, If the PC from clean install, you can follow these steps to test this issue.
    1.      
    Start the Outlook in safe mode,
    Press and hold the CTRL key,
    and then click Outlook.
    If the problem does not occur in the safe mode, this issue might be related to some third-party add-ins in the Office program, we can try to disable them.
    2.      
    Create a New profile & PST file to test this issue
    If this problem does not occur in the new Outlook profile & PST, the old Outlook profile is corrupted. We can delete that and use a new Outlook profile.
    3.      
    Make sure the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office
    key permissions to allow full permissions to all users
    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might
    occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how
    to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:
    322756  How
    to back up and restore the registry in Windows
    a)     
    Exit Outlook if it is running.
    b)     
    Click
    Start, and then click Run. Copy and paste (or type) the following command in the
    Open box, and then press ENTER: regedit
    c)     
    Locate and select the following key:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office
    d)     
    On the
    Edit menu, click Permissions.
    e)     
    Click the registry key for the user who is currently logged on, and ensure that
    Read and Full Control permissions are both set to
    Allow.
    f)      
    Click the Advanced button, ensure that the user who is currently logged on is selected, that
    Full Control is listed in the Permissions
    column, and that This Key and Subkeys is listed in the
    Apply to column.
    g)     
    Click to select the Replace permission entries on all child objects with entries shown here that apply to child objects check box, and clear
    the check box
    Windows 7: Include inheritable permissions from this
    object’s parent
    Windows XP: Inherit from parent the permission entries that apply to child objects. Include these with entries explicitly defined here.
    h)     
    When you are prompted to continue, click Remove.
    i)      
    Click Apply, and then click Yes when you are prompted to continue.
    j)      
    Click OK, and then click OK again.
    k)     
    On the Registry menu, click Exit.
    Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
    I can do for you, please feel free to let me know.
    Hope that helps.
    Sincerely
    William Zhou CHNPlease remember to mark the replies as answers if they help and unmark them if they provide no help.

  • Cannot create new folder?

    I have just moved to a new hosting and have connected to it
    and I can edit files. When I try to add a folder to the remove I'll
    get
    "An FTP error occured - cannot create new folder .
    Access denied. The file may not exist or there could be a
    permission problem".
    Any idea?

    Hi,
    Did you make any changes before the issue appears?
    Before going further, you may try the
    system restore to go back to a previous status and check the result.
    Tracy Cai
    TechNet Community Support

  • Cannot Create New Mailbox

    Hi all,
    First of all I already create a similar thread : http://social.technet.microsoft.com/Forums/en-US/b8f88745-ca79-43f9-8857-3b87781e5c19/rbac-to-create-mailbox?forum=exchangesvradmin 
    I got a problem in my Exchange Server 2013 environment. I cannot create new mailbox (new user) from ECP. But I can create new mailbox and choose existing user.
    Active Directory operation failed on DC.mydomain.com. This error is not retriable. Additional information: Access is denied. Active directory response: 00000005: SecErr: DSID-031A121F, problem 4003 (INSUFF_ACCESS_RIGHTS), data 0 
    already try with no luck :
    re-inherit the permission.
    setup /prepareAD
    I create new user and assign Org Management & Domain Admin
    how to check whether the permission in my AD is correct ? or any idea should I start troubleshooting ?
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
    Krisna Ismayanto | My blogs: Krisna Ismayanto | Twitter:
    @ikrisna

    solved by executing setup.exe /preparedomain
    and I found one of the server in container ADSIEdit were disabled inheritance. execute setup.exe /prepareAD, reboot the server (because it
    ask for it), then execute setup.exe /preparedomain
    cheers ! :)
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
    Krisna Ismayanto | My blogs: Krisna Ismayanto | Twitter:
    @ikrisna

  • BO4 - cannot create new universe connections

    Hi,
    In Universe Design Tool, trying to create new universe connections but not allowing this.
    Doesn't show all the data access drivers we have installed.
    Can migrate connections fine from XIR2 fine and reports run O.K
    Why cannot create new universe connections
    Many Thanks

    Hi,
    there are some notes about this in the knowldge base. Here are a couple:
    For ODBC, Note   1272557 - Data Access Drivers missing while creating a new connection in Designer
    for JDBC, Note 1481410 - JDBC Drivers do not appear in the List Of Drivers when Creating a New Universe Connection in Universe Designer
    Can you hit www.service.sap.com/notes to look them up?
    Regards,
    H

  • AGN Virtual Network Adapter

    Why does AGN Network adapter install and what does it do?
    I had two icons in network connections:
    1. AGN Virtual Network Adapter
    2. Local Area Connection
    I am connected to an adsl router and am able to connect OK.
    I disabled the AGN Virtual network adapter and am still able to connect ok.

    Sorry, let me further add I get the following messages from Access connections after the wireless connection fails....
    Error code: 011
    Veyify that the encryption settings (WEP/TKIS/AES) specified in this profile match those expected by the wireless network
    and
    Verify that the wireless adapter in your computer has not been restricted from accessing the radio channels being used by the wireless newtork.
    and
    The wireless network name (SSID) specified in this profile shares the same radio channel as another wireless network that is in range.  To attempt to resolve this conflict, click repair.
    None of these messages are helpful or should be the problem.  I had been using wireless access on this laptop with the same router for several years before 'uprading' the dirver...that's when my problems started.

  • How to create an Virtual resource Adapter in SUN IDM 7.1?

    Hi,
    Can anyone know how to create an Virtual resource Adapter in SUN IDM 7.1?
    Regards
    Damodar

    Hi Dinesh,
    Try using waveset.adminRoles
    Thanks

  • After upgrade to 6.3.4 cannot create new bookmarks by dragging nor open existing bookmark properties

    Just upgraded to 3.64. Now I cannot create new bookmarks either by dragging a URL or trying to create a new one in organize bookmarks. For existing bookmarks when I hit properties on the pop up menu all I get is a title bar that says "bookmark properties for (name of bookmark)" but I can't resize it or otherwise manipulate the title bar to access information or change the properties

    Hello Victor.
    You may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
    Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
    If you want support for one of your add-ons, you'll need to contact its author.

  • HT5577 i bought  recently a second hand apple i phone 4s but now i cannot creat new apple id

    i bought  recently a second hand apple i phone 4s but now i cannot creat new apple id .

    I suspect you're referring to the 3 free iCloud account limit on an iOS device. If so, there's no way around this. Once that limit is reached, you'll have to create the iCloud account on another iOS device or computer, then setup that account on your phone.

Maybe you are looking for

  • Reduce out put field length of alv output in back ground

    Hi all, Is there a way to reduce the output length of the field in back groundfor ALV out put Its back ground I have thsi things in my field catalog wa_fieldcat-outputlen = 10. wa_fieldcat-ddic_outputlen = 10. If the field has value of length 10 char

  • Thinkpad E540 Dual External Monitors

    Hi, I'm looking to purchase the Core I7 E540, and see it comes with the Nvidia 740M chipset. I've found confirmation that the core I5 with intel 4600 graphics supports muliple monitors over both HDMI and VGA simultaneously - giving 3 seperate display

  • Adding space in equations

    I know this must be obvious but I cannot figure out how to add a space in FM's equation editor. I know how to do it in LaTeX. What I want to do is an equation like: Mortality Rate = exp (R) / k*exp (1+R) I can use MortalityRate but if I put in a real

  • Fetching row affected by a query

    Hi =) I've my execQuery method here that returns a ResultSet of results. I would like to know the rows returned, but I cannot find a count, lenght or size method in the ResultSet class. �Hoy can i count the number of Rows affected by a query? public

  • HT5312 iforget my answers security question for appel id

    iforget my answers security question for appel id