Cannot delete files from hard disk (after deleting from playlists)!

all of a sudden itunes stopped allowing me to automatically delete (with the warning) a downloaded podcast so I would have to go to the hard disk manually to delte the posdcast.
How do I get the system back to what it was where I delete a podcast and then get the warning and say ok to delete from hard disk?
TIA!

Hi Chris:
2 part response:
I founf the problem--somehow my itunes folder was moved to a different part of my hard drive--once I moved it back I can delete.
I can delete as follows: when I right click and click on delete, I first delete the file from itunes library--then I get prompted if I want to delete from my hard disk by sending file to recycle bin--There is also a prompt if I do not want to see the warning--which I have on as a safety precaution. So I bet the default could remove from playlist and send file to recycle bin in one move.

Similar Messages

[solved] Boot installer from hard disk, but install from external DVD.

Hi!
I have an old notebook with broken cd-rom and without support to boot from USB disks (only "USB-FDD"). I want to install on this notebook Arch Linux! I bought an external DVD writer and I would like to only boot Arch linux, but install from external drive. How can I do it?
Last edited by gienekr (2011-12-07 14:58:49)

Mavirick wrote:Have you tried burning the ISO to a disk, putting it in the external drive and powering on the laptop? If yes and that did not work have you gone into the bios to see what your boot options are for the laptop with the external device plugged in?
Yes. My laptop does not support booting from usb-cd and usb-hdd
But I installed Arch by grub4dos to boot from iso, connect external dvd and start installation. System successfully detected the dvd drive so I could install a new system!

How to recovery the deleted files from hard disk like images,media files

How to recovery the deleted files from hard disk like images, media files by using c#.net

It's important to define deleted and recovery. You can recover file from the recycle bin using the Win API. Here's an
example in C/C++. You need to
pinvoke SHFileOperation.

Use previous "Delete from hard disk" checked state?

Is there any way for the program to use the previous "Also delete selected item(s) from the hard disk" checked state in the file deletion confirmation dialog? It gets tedious to check it every time I want to delete a file and if I forget to do it I will have an extra file sitting on my hard disk not in my catalog.

A quick shortcut that I use is to hit the spacebar (checks/unchecks the "delete from
hard disk" option), then hit the enter key to complete the process.
Michael

I have limited storage laptop, I want to delete music from hard-disk

I have a limited storage laptop, I want to delete music from hard-disk and just leave it on my 60Gb ipod, BUT I dont want to have to log in as a guest every time.
Any suggestions

Follow the instructions in this article and then delete the songs from your computer; they will not be deleted from the iPod automatically. You should have or make another copy of the songs before deleting them from the computer, as they can easily be lost if they are only on the iPod.
(16173)

Hi, i'm new in my macbook air! i miss deleted my external hard disk few day ago and i had spend 45GBP to recovery the data! but the problem now is the text document is locked i not even can read and open the document! any solution??? urgent

hi, i'm new in macbook air, i was miss formatted and delete all my data on my external hard disk (pic, microsoft office document and etc). i spend 45gbp to install the software fianlly recovery all the data! but why my text document can't open and read?? what's is the problem?? because i'm still a student i hv alot of assignment file cant be read and open but nect week is the deadline of submission and i have no back up of all document. So any useful suggetion solution?? i've try the way alt+command+i to unlock but it doesn't work!! help! URGENT

when i open the file it appear some digits and word tat i couldn't understand. and the tool bar stated "Locked"
example: 422583321135679999=@ABBCCEEFGHIKJHMIFFFHFHDCEGFFBI\cb[C?@<=>=;;;<;>>>?<>B@>?==< =>?>@A?>?@<==<;:::899:89>:9;99;9:;<;66988;359<==9987789:8::9;>>=799<>:88856::;<: 99====<::98988;;96677998887866:89::;99647878665797698899;8466646763/121120+031/1 2/.1.,.0//.+/,+.0220/0.-/21-++--1---+-.+-.--/=Pdoxx
the digits and words tat appear on my document!
i used MiniTool Mac data to recovery! actually b4 tat i'm using hp computer and i saved all my files in my external hard disk. When i using mac i installed the NTFS-3G but it still cant read my external hard disk and i miss deleted and formatted all the data in my external hard disk. after tat my friends suggest me to purchased the software to recover all the data,finally i got all my photo back except my microsoft office files.
i purchased miscrosoft office software for my mac yesterday but the files still cant be read and couldnt recover back the document tat i saved! i was upset to spent alot of money but still cant get my document back!!

HT201077 Is there a way to delete files locally, on iPad, after they have been backed up in iCloud, without losing any files?

Is there a way to delete files locally, on iPad, after they have been backed up in iCloud, without losing any files? Because iCloud is seeming like it actually doesn't back up anything.. Just clogs up all storage space on every device with duplicate images/videos. I am looking for a delete when backed up feature. Does that exist?

quote:
Originally posted by:
Michael Hager
The problem with any boxed software is that the developers
can NEVER know how every possible customer will use the software.
That's why, as a developer, they need to make
the software have MANY more checkboxes in the options screen to
allow the user to use the software the way they need to, not the
way the developers THINK they will need to. Just look at Microsoft
as a poor example of this--I am never so frustrated as when trying
to use ANY of their Office products, which make easy tasks
difficult and do not include some of the most common options that
competing products have.
quote:
The Dreamweaver check out system actually works very well if
it’s set up properly and administered strictly. If you set it
up on your testing server with everyone set up on their work
stations correctly it will tell you who has a file locked for
editing. Once everyone is working as a team with good supervision
and division of tasks under a strict policy set by management,
Dreamweaver will work very well for your purposes. You
shouldn’t have to lock and unlock files manually since the
check in-check out function will do it for you nicely. When you are
satisfied that all is well with the site or particular pages, then
someone in a managing position can release or authorize release to
the live site.
The problem is that I am the only person using
DW in the organization, everyone else is using Frontpage...blah...
You and Murray have both alluded to a separate "testing"
server. Perhaps I can make this system work by setting up the
testing server as a duplicate of the development server in my site
manager. Then I would have to manually publish the files from the
testing server to the live production server myself. What a pain!!!
I can not believe that I am the only person in the world that has a
setup like this -- it seems very common to me. I would assume most
government organizations are set up identically as us.
<sigh>

Copy a file from hard disk to a jar

Is there any way to copy a file from hard disk to a jar file?

hajani wrote:
No, I want to copy a file into an other jar file (like a zip or a rar file)
Edited by: hajani on Dec 7, 2008 4:11 AMIf you really do mean 'jar' file an not 'zip' or 'rar' then you can use class java.util.jar.JarFile and write your own code. If you don't feel like writing a load of code then and you can guarantee that the 'jar' executable is going to be available then you could use Runtime.exec() or it's cousin ProcessBuilder. If you mean a 'zip' file then you could use class java.util.zip.ZipFile and write a load of code. If you mean a 'rar' file then you will either have to find a 'rar' class library or again use Runtime.exec().

How can i delete photos from iphone 4s after transferring from pc?

How can I delete photos from iphone 4s after transferring from pc?

acapetown is the one who really solved this for me: his suggestion to create an empty folder and sync to that was THE ONLY solution that actually worked for my iphone 4s. Everything else about uncheckign "sync" and unchecking events DID NOT WORK. I think there is more than one glitch in this system because I noticed a lot of other people struggling with the question. Now my phone is light as a feather again and I can actually benefit from backup to the Cloud. Thanks acapetown!

Adding music folder from hard disk to itunes causes the original music to vanish

what is causing itunes to delete original music folder from hard disk when selecting add folder to itunes

iTunes doesn't have any automatic way of re-creating your directory structure in terms of folders and playlists in iTunes. You will have to drag each music folder to a playlist and then arrange these in folders inside of iTunes (which I warn you can can slow down iTunes a lot). I guess the once chance of speeding this up will be if somebody has written an Applescript to do it, but I don't remeber seeing any anywhere.

Noise from hard disk

Hi, everyone.
I bought a new mackbook pro in this Jan. Recently, I hear some not continuously noise from hard disk, especially when i open a file in hard disk or verify the hard disk. Is something wrong with my hard disk?
Thanks

This hard disk clicking is a know problem for many laptops. If you search it on Google, you will find a lot of discussions about it in the Unbuntu Linux forums. In most cases, it is due to the Advanced Power Management (APM) feature of notebook hard drives. The default APM settings of these drives are aggressive so as to extend notebook battery life. As a consequence, the HD tries to park its actuator head to the ramp whenever it judges the system as idle. However, OS X or some third-party applications may access the hard disk quite often, resulting in a park/unpark cycle every few seconds.
Every of these cycles is counted as one load/unload cycle. Most notebook drives support up to 600,000 load/unload cycles. If a hard drive parks its head every few seconds, it may shorten its life by "using up" the cycles more quickly.
I had the same problem on my Powerbook with a Hitachi Travelstar 5K160 80GB PATA drive. I heard the frequent clicking sound right after I installed it into the laptop. The SMART status appeared to be Verified, and there was no problem with the drive itself. After searching on Google and Hitachi web site, I found the causes and solved the problem using the Hitachi Feature Tool. For other HD brands, I have no experience at all.
Basically, Travelstar 5K160 drives have three idle modes, from which a user can set one as the deepest idle state:
1) Active Idle: the actuator head is parked near the center of the disk, and power usage is 45-55% less than performance level. Recovery time to active mode is about 20ms.
2) Low Power Idle: this is usually the factory default idle mode. The head is UNLOADED to the ramp and the power consumption is 60-65% less than the performance level. Recovery time is about 300ms.
3) Low RPM idle: in this idle mode, the hard disk will spin down to a lower RPM speed. More power is saved but recovery time is much longer. (I can hear the disk spin down and spin up again a few times per minute. There is also a lag in system reaction time.)
To get rid of the hard disk clicking, you need to set Active Idle as the deepest APM idle mode. To do it on a Hitachi hard disk, you need Hitachi Feature Tool, and a Windows laptop with the same HD interface as your drive (PATA or SATA). Sadly, the feature tool is only for Windows and Linux.
You can download Hitachi Feature Tool 2.10 as an ISO image here: http://www.hitachigst.com/hdd/support/download.htm#FeatureTool and burn it into a bootable CD. The userguide of the tool is available on the same page.
Then, take out your hard drive from your Macbook and install it into a Windows laptop. Boot the machine using the Feature Tool bootable CD. Choose "Change Advanced Power Mode" from the drop-down menu.
The default value is 128 (Low Power Idle). Just increase the value toward Performance, until you see the APM mode over the value bar becomes Active Idle (starting from 192). Click OK and Exit the feature tool. Switch off the Windows laptop and take out the hard disk. Install it into your Macbook. You will not hear the clicking sound again when system is idle. The lowest APM mode will be Active Idle and hence the drive will not park its head to the ramp during operions.
If your hard drive is a Hitachi Travelstar 5K160, you can find the 5K160 specifications version 1.1 from Hitachi web site. On page 69 of the document, it explains the APM idle modes. On page 145 about the register values of the APM modes.
To set Active Idle as the deepest idle mode may adversely affect battery life. (I haven't yet tested it myself) However, there seem not to be a big difference than the Low Power Idle, according to the datasheet of 5K160. For this model, power consumption of Active Idle is 0.8W, while that of Low Power Idle is 0.6W, on average.
Hope this is helpful.

Finder requires password to delete files, Trash does not show deleted files. Please help me resolve.

Deleting folders/files causes the password pop up interface to appear, does not seem to matter where the file/folder is. After deleting, it should appear in the trash, but does not. Moving files is not affected, with the exception of moving files into Trash. This did not happen in the morning.
Accessing ~/.Trash gives following message "The folder “.Trash” can’t be opened because you don’t have permission to see its contents." .Trash is hidden, and i can't view its permission from the Get info page.
I am the owner of the laptop, i don't understand why this is happening. The other thread with similar problems involved a software upgrade and had problems with moving files also, whereas my MBP was okay this morning, i didn't do anything else from then till now.
i did a ls -al ~ on the terminal, relevant lines as follows
drwx------
10 root staff
340 Jan 18 02:09 .Trash
compared to desktop, which i had no problems (yet, not sure)
drwx------+
30 Mac   staff
1020 Jan 18 02:08 Desktop
i don't understand the notation, reading up about them does not clarify any more then to confuse me further.
My user is "Mac", ~/ goes to folder "Mac"
Please help, I have tried booting from save mode, and it is the same.

Visit The XLab FAQs and read the FAQ on solving Trash issues. You can also try using Trash It! 5.1 to fix the problem. Or you can try this:
Open the Terminal in the Utilities folder and paste the following at the prompt:
    sudo rm -Rf ~/.Trash
Press RETURN. Enter your admin password when prompted. It will not echo to the screen. Press RETURN again.
(Should anyone tell you this is dangerous or unnecessary, please ignore the comment.)

VirtualBox from hard disk, nvidia glx conflict

Howdy folks, I recently started getting into arch linux and set it up for dual booting. Being a graphics engine developer for multiple platforms I began to work on adding support for linux.
What I was trying to set up was so that I can use VirtualBox to load my arch install from hard disk, which I have gotten running, so that I can use virtual box to test if things work when developing simultaneously for windows, and boot over to arch for performance optimization type stuff.
The problem I am having however is that in VirtualBox I can not get the glx extensions to load, looking at the log file it's definitely trying to load the nvidia glx extensions. My PC has an Nvidia Geforce 9600GT, so for proper support in arch I of course installed the drivers for it.
As per suggested in the wiki I removed the xorg.conf (actually just renamed it), along with a few other files in /etc/X11/xorg.conf.d that were causing problems in virtual box (mainly the 20-nvidia.conf file). I have verified it does boot into arch with full 3D support as it did when the xorg.conf was in place. But still having the problems getting the glx extension to load when inside VirtualBox.
I would greatly appreciate any help ya'll can provide, being able to load my arch install from virtual box would make developing this graphics engine of mine so much easier. But I still want to be able to boot into arch. Having to use a VirtualBox instance booting from a virtual hard disk is a real pain since it add to the places I need to sync up source code.

I think you misunderstood ngoonee. Just trying to get open gl working from within virtual box, I know it's only serving as a layer over the graphics stuff.
The problem however is that to allow gpu acceleration when I boot into it, the nvidia driver will need to remain there. But it appears the glx in the nvidia driver will not play nice with what virtual box needs.
Idea is to use the same arch install for both virtual box and the dual boot.
Last edited by chronosifter (2010-07-21 04:28:54)

HT1338 exe files won't open after downloaded from Safari on my Mac OS X 10.4.11

exe files won't open after downloaded from Safari on my Mac OS X 10.4.11

I use the free Unarchiver: http://unarchiver.c3.cx/unarchiver
I have just tested it on a self-extracting Windows Internet Explorer and it opened it first time on my Mac.
However, as you have been told, normally Windows executable files cannot be opened or used on Macs.

Can't access Time Capsule's hard disk after Lion upgrade

I haven't been able to access my TC's hard disk after I upgraded to Lion.
I used to manually backup files to the volume but I can't do it anymore. I can't see the disk in the Finder's sidebar. Devices are all checked in Finder's preferences for sidebar and my WiFi/Internet works fine. Airport Utility doesn't show any problems and upgraded to OS X 10.7.1 but still no luck. I also tried to hook my laptop with ethernet cable and my TC but it didn't work either.
Any ideas?

I'm new to Time Capsule, but I think I have the same problem. I thought I could use Time Capsule as a hard drive, but it comes on and off in my finder. Is this normal?

Cannot delete files from hard disk (after deleting from playlists)!

Similar Messages

Maybe you are looking for