Cannot delete Mac OSX partition, need help

Hi,
     I recently checked my storage space on my 256 GB Macbook Pro and realized that I only have 199 GB of total available space.  Checking the Disk Utility, it appears that somehow I ended up with an "Untitled 2" partition that is taking up about 20 GB.  This partition is listed as being "free space", but I cannot delete it or otherwise adjust how much space it is taking up.  I think the partition might have been created when I installed the public Yosemite beta on a separate partition, however, it seems that I did not delete it correctly or something.  How can I restore my hard drive to only having the default "Macintosh HD" and delete the partition to free up space?  Thanks so much for any help.

Hi,
     I recently checked my storage space on my 256 GB Macbook Pro and realized that I only have 199 GB of total available space.  Checking the Disk Utility, it appears that somehow I ended up with an "Untitled 2" partition that is taking up about 20 GB.  This partition is listed as being "free space", but I cannot delete it or otherwise adjust how much space it is taking up.  I think the partition might have been created when I installed the public Yosemite beta on a separate partition, however, it seems that I did not delete it correctly or something.  How can I restore my hard drive to only having the default "Macintosh HD" and delete the partition to free up space?  Thanks so much for any help.

Similar Messages

  • Cannot perform Mac OSX recovery need help

    Morning forum
    I am hoping that I can find the help to my issue here as I need this machine up for business. I m having trouble reinstalling the OS as it is stating that it cannot find the system folder (folder with ?). I have tried to perform recovery installation holding down command R and also the other option of holding X down whilst boot up but it seems the keyboard shortcuts are not working or is there a more serious problem. I tied the RAID sets yesterday and all came back all drives seem to be ok. I am baffled as to what I can do. Any help is always appreciated.
    Regards

    You have no recovery partition. This is a normal condition if your boot volume is a RAID.
    You have several options for reinstalling.
    1. If you have access to a local, unencrypted Time Machine backup volume, and if that volume has a backup of a Mac (not necessarily this one) that was running the same major version of OS X and did have a Recovery partition, then you can boot from the Time Machine volume into Recovery by holding down the option key at the startup chime. Encrypted Time Machine volumes are not bootable, nor are network backups.
    2. If your Mac shipped with OS X 10.7 or later preinstalled, or if it's one of the computers that can be upgraded to use OS X Internet Recovery, you may be able to netboot from an Apple server by holding down the key combination option-R  at the startup chime. Release the keys when you see a spinning globe.
     Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication. 
    3. Use Recovery Disk Assistant (RDA) on another Mac running the same major version of OS X as yours to create a bootable USB device. Boot your Mac from the device by holding down the option key at startup.Warning: All existing data on the USB device will be erased when you use RDA.
    Once you've booted into Recovery, the OS X Utilities screen will appear. Follow the prompts to reinstall OS X. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
    If none of the above choices is open to you, then you'll have to start over from an OS X 10.6.8 installation. There's no need to overwrite your existing boot volume; you can use an external drive. Install 10.6 from the DVD you originally used to upgrade, or that came with the machine. Run Software Update and install all available updates. Log into the App Store with the Apple ID you used to buy 10.7 or later, and download the installer. When you run it, be sure to choose the right drive to install on.

  • Wanted to restore macbook but cannot reinstall mac osx lion, any help?

    tried to reinstall mac os x lion after buying a 2009 macbook air from someone. just wanted to reset the machine to factory settings, but everytime i try the screen says it is temporarily unavailable. anyway to help this problem?

    Hi tonysaez,
    I apologize, I'm a bit unclear exactly when or in what context you are seeing the "temporarily unavailable" message. If you are having issues restoring your Mac to factory settings, you may find the steps outlined in the following articles helpful:
    OS X: About OS X Recovery - Apple Support
    OS X: How to erase and install - Apple Support
    What to do before selling or giving away your Mac - Apple Support
    Regards,
    - Brenden

  • Blank Grey Screen on start up cannot access MAC OSX frozen up

    Blank grey screen on start up Cannot get into the Mac osx side, even if I do not hold down the option key it goes to the Windows side but key boad / mouse does not work. I want to get into the mac side so I can delete the windows partition. HELP PLEASE!!!!!!!!!!!!!!!

    See Here >  http://support.apple.com/kb/ts2570

  • Cannot Install Mac OSX on this Computer!! HELPPPP!

    Well here is the situation. I have a PowerMac G4 (Digital Audio). i had it upgraded a year ago to a 1.53Ghz G4 Processor, 1.5 GB Ram, I have a 160GB HD, and a 40GB HD. All the firmware is up to date. i went to Install leopard and the OS didn't recognise my system configuration. i called Apple and well all i got was " That I basically made a custom PC and Leopard will not recognise the Hardware and configuration. "Cannot Install Mac OSX on this Computer" was the message I got
    So I had to revert Back to Jaguar and I'm hating it. Any help on this one, or should I cut my loses and sell Leopard?

    am currious too as i have a g4 dual processor 800 and am wondering if it will install on it. the dp has plenty of hp to run it. if yours is showing as a 1.5 in profiler should install. but one glitch could be many sonnet upgrades do a trade off and a faster processor but they down clock the fsb speed to get it. check and see if fsb is at least 133. i do pc service for a living and love mac for my own use but apple is a bit arrogant on it's software as to install specs and not offering a uninstaller option. on that windows is a lot more friendly and flexable.

  • Can't install windows to mac osx partition!

    Hi, I had 2 partitions in my macbook pro, 1 for mac osx and 1 for bootcamp, and I wanted to install mac osx to a firewire hard drive, but i messed it up and installed mac osx OVER the bootcamp partition.
    Now I have 2 mac osx partitions on the macbook pro, and can't reformat the partition to reinstall bootcamp.
    Is there a way to reformat that partition and reinstall bootcamp (windows)?
    Thanks in advance!

    That is why backup should be #1 and last.
    You have to return (ie, reformat) your drive probably back to one partition with just Mac OS before you can use Boot Camp Assistant.
    While at it, just clone one of your Mac OS volumes over to FW now. Later, with Windows installed, make an image of that (WinClone) while in Mac OS to your FW drive also.

  • Photoshop CS5 crashes when trying to print. I recently updated to Mac OSX Mavericks. Help?

    Photoshop CS5 crashes when trying to print. I recently updated to Mac OSX Mavericks. Help?

    Hi, Chris. Thanks for giving this query a look. I have the same problem. All documents print on my HP Deskjet 932C except Photoshop files since I updated to Mavericks.
    My CS5 version is 9.0 x64. Mavericks is 10.9.4.
    I checked the HP drivers and HP doesn't have one for OS X newer than 10.4.
    I tried printing out the detailed report (very long!) and this page rejected the reply as spam. Can we provide the text as an attachment?

  • I just bought an iPad and each time I click on the iTunes button it says "cannot connect to iTunes" I need help on this urgently

    I just bought an iPad2 and each time I click on the iTunes button it says "cannot connect to iTunes" I need help on this urgently

    Try a Reset...
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    Basic troubleshooting
    From Here
    http://www.apple.com/support/ipad/basics/

  • Cannot install Mac OSx to harddrive

    cannot install Mac OSx to harddrive

    Plus what model of MBP are you attempt to do this install?
    What are the hardware specs on it?
    Allan

  • What do I do if I cannot download mac osx due to no space on my computer?

    I cannot download Mac OSX due to not enough space on my computer. What do I do to
    create space?

    Free up space.
    Freeing Up Space on The Hard Drive
      1. See Lion/Mountain Lion/Mavericks' Storage Display.
      2. You can remove data from your Home folder except for the /Home/Library/ folder.
      3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
      4. Also see Freeing space on your Mac OS X startup disk.
      5. See Where did my Disk Space go?.
      6. See The Storage Display.
    You must Empty the Trash in order to recover the space they occupied on the hard drive.
    You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
    Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.

  • HT1212 I cannot remember my passcode and need help to change/reset my passcode.  I need this information in simple terms.  I have attempted to follow the instructions above without success

    I cannot remember my passcode and need help to change/reset my passcode.  I have tried to reset using the instructions on the website without success.  Please explain to me in simple easy terms how to access my ipod.  Thanks

    Forgotten Screen-Lock Passcode
    Connect the iOS device to your computer and try to make a backup
    iOS: How to back up
    Then restore via iTunes. The iPod will be erased. Place the iOS device in Recovery Mode if necessary to allow the restore.
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up    
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store    
    You can also Google for YouTube videos that show how to do it

  • Just got an iphone 4 from my dad and its his old iphone and i was gonna delete his account so i can put my account on the iphone but he does not remember the  password so I couldnt delete it. I need help deleting it without a password

    just got an iphone 4 from my dad and its his old iphone and i was gonna delete his account so i can put my account on the iphone but he does not remember the  password so I couldnt delete it. I need help deleting it without a password.

    If the iPad has Activation Lock - that is, it's asking for the previous owner's Apple ID and password to activate the device or to turn off Find My iPhone - then you will need that information. There's no way around it If your father can't remember the password, he'll need to recover it.
    http://iforgot.apple.com
    If he can't do it via that page, then he'll have to call Apple Support and ask to speak with Account Security.
    If that's not the "password" you meant, please post back and clarify.
    Regards.

  • Cannot open Photoshop?? Need help. I got the creative Cloud.

    Cannot open Photoshop?? Need help. I got the creative Cloud.

    Mee too it works.. im really happy
    Am 01.10.2014 19:42, schrieb sam.am:
    >
          Cannot open Photoshop?? Need help. I got the creative Cloud.
    created by sam.am <https://forums.adobe.com/people/sam.am> in /Adobe
    Creative Cloud/ - View the full discussion
    <https://forums.adobe.com/message/6781543#6781543>

  • I bought CS6 and got the Serial Number, but when I install, it said cannot verify this number, I need help!

    I bought CS6 and got the Serial Number, but when I install, it said cannot verify this number, I need help!

    Contact Adobe (You may need the chat option):
    Contact Customer Care

  • HELP PLEASE cannot install Mac Osx

    hey I really need help please!
    I tried to modified my dock using my resources folder in the dock components but I surely did something wrong cause when I tried to click on time machine, it said that I need the right osx version.
    So I restarted my computer but it just wont start, i see the spinning gear over and over again. So i decided to reinstall mac os x tiger and to reupgrade to leopard afterwards.
    I restart m computer, hold C, get to the install process and when I need to choose my volume, I choose my HD, the one in the iMac but its says cannot install on it because of a Volumecheck problem...
    I really need to reinstall it without loosing my data on it I have some important photos for my work, I NEED THEM!
    HELP!

    Hello and welcome to the Apple boards
    If you have been using Time Machine, you can restore your system from it using the Leopard DVD and following the instructions on this link:
    http://www.peachpit.com/articles/article.aspx?p=1091577&seqNum=6
    You might first try booting from the DVD and repairing your HD first. The tools are in the Utility folder on the DVD
    You boot into the DVD by starting the computer and holding down the "C" key.
    Hope this helps a bit.

Maybe you are looking for

  • Error in Creating a Chart Web Part Connected to a List-Column named "" already belongs to this DataTable

    Hi, I am trying to create a Chart Web Part that is connected to a list.  I inserted a Chart Web Part on the page. In Step 1, I chose, Connect to a List. In Step 2, I chose the List, "QPAPForm" After I connect to the list (QPAPForm), and I get to step

  • Data_parameter

    Dear All, How I can use DATA_PARAMETER in 10g forms to pass record group to report. Thanks for advance

  • Aggregate one-to-many relationship problem

    Hello, After migrating from Toplink 9i I've stumbled across a problem with our aggregate objects. Toplink Workbench reports no errors and generates a nice XML but in runtime I get this error whenever a aggregate function is used. [TopLink fin]: 2008.

  • Macbook: Slow to Sleep

    I have a new aluminum Macbook with 10.5.6. I just started noticing when I select "Sleep" from the Apple menu the screen will go blank, the indicator light is still on solid. It stays this way for about 20 seconds then finally it goes to sleep. The ha

  • Product calculation in combination with additive cost and mixed costing

    Hello all, I want to calculate trading good. I have defined a mixed costing for this article. Additional I had entered additive costs for the same article. When I run the calculation, it works only with the definitions of the mixed costing. Does the