Cannot Display MSG (MS Outlook) from Documentum in SAP

Hello Everyone,
We have linked SAP with Documentum to be able to retrieve documents stored in the content server. We made all the setting required in OAC0, OAC2, OAC3.
We set everything to attach objects of types PDF, DOC, XLS and MSG.
We can attach all the objects without problems and they are stored in the content server.
We display PDF, DOC, XLS in SAP without problmes but we cannot display MSG files. It´s like the extension .msg of the object is missing when we try to display in SAP. In the Documentum content server is stored ok whit its extension.
I would greatly appreciate your help if you can help me in resolving this issue.
Thanks and Regards,
Luis.

We also had the same issue. It was working prior, and suddenly we can't view .msg file (in CMOD archived storage) in portal as it no longer recognize mime type for this. This must be a new patch from outlook last week. We ended up implementing config change suggested in note 1840170, and add this mime entry in local registry. As per IBM note http://www-01.ibm.com/support/docview.wss?uid=swg21610741, it looks like there's no other choice but to do it.
We plan to push this entry to all users' computers soon.
Regards.

Similar Messages

Cannot Display PDF from Documentum in SAP

Hello Everyone,
We have linked SAP with Documentum to be able to retrieve documents stored in the content server. We made all the setting required in OAC0, OAC2, OAC3. But when we are posting a document against a Purchase Order from documentum and trying to view that PDF from "ME23" it is giving us an error message as shown below:-
"The XML page cannot be displayed
Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
An invalid character was found in text content. Error processing resource 'file:///C:/Documents and Settings/gopal.yarlagad...
But if we go into the "OAOR" I can see the document against the Purchase order. We are not able to figure out the issue regarding this. I would greatly appreciate your help if you can help me in resolving this issue.
Regards,
Gopal.

We also had the same issue. It was working prior, and suddenly we can't view .msg file (in CMOD archived storage) in portal as it no longer recognize mime type for this. This must be a new patch from outlook last week. We ended up implementing config change suggested in note 1840170, and add this mime entry in local registry. As per IBM note http://www-01.ibm.com/support/docview.wss?uid=swg21610741, it looks like there's no other choice but to do it.
We plan to push this entry to all users' computers soon.
Regards.

Cannot display the Crystal Report from BW..very Urgent

Hello Friends,
We are executing the Crystal report XI report from BW 3.50 but cannot displaying andgiving the error messgae as follows....
<b>Service cannot be Reached</b>
<b>What has happened?
URL http://sapprodbw.company.com:8112/sap/bw/sap/bw/ce_url call was terminated because the corresponding service is not available.
Note
The termination occurred in system I12 with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:sapprodbw_I12_12-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team</b>
I'm getting the above error could plz help me .. its very urgent task for us..
Thanks in advance for your valuable time...
Sreedhar G.

Hi Dinesh,
I started all the services and i checked the Test service of ICF its giving the same above error and service cannot be rezched...BASIS is also workin on the same issue but getting ...
Any help...
Message was edited by: sreedhar Gunda

Cannot display table's data from an Excel File

Hi everyone,
I have uploaded my excel table to ODI but now i got an error message on a window that whenever I try to see the info and it says more o less the following:
Oracle Data Integrator Error
Cannot display table's data.
java.sql.SOLException: [Microsoft][ODBC Excel Driver) The Microsoft Jet database engine cannot open the tile '(unknow)', It is already opened exclusively by another user, or you need permission to view its data.
Has any one faced this issue before?
I assume that it is something with the ODBC, but as far as I know it was all right.
I would really appreacite any ideas on how to solve this issue.
Best regards.
J

Something is reading your file, have you got it open in Excel?
I've had similar issues reading Excel via ODBC with OBIEE - once a process opens it you might find you need to kill whatever it was and restart it.
So its either you or the ODI Agent / Console , try restarting it if its not you.

Linking Documents from Documentum to SAP transactions

Hello Everyone,
I have been working on integrating SAP and Documentum for retreiving documents stored in Documentum from SAP. I have been searching on SDN for a while and was not successful in finding a proper solution to my problem and hence this new thread.
We have created a "Content Repository" in tcode OAC0 and made all the required config in "CSADMIN" as well.
Then we have created a new "Document Type" called "ZFI" and assigned an Object type "EKKO" and Document class "PDF" for it.
I have also created a "Document Type" called "ZFI" under "Cross-Application Components>Document Management>Control Data--> Define Document Types and also created an "Object link" to "EKKO".
Now, when our Documentum administrator is running a SAP Query from CS SAP by passing a Purchase order number, everything seems to be fine. But, if i go to "Me23" I cant see any attachement. Could anyone explain me of anything wrong in our configuration. I would greatly appreciate your help. Please, let me know if you need any clarification.
Regards,
Gopal.

Hello Gopal,
Sounds like you're close. In my experience in linking SAP Purchase orders to Documentum, I did the config somewhat differently.
First, DIRS were not involved, I do not think you need to create a Doc type via DC10. I used Archivelink.
Second, the content repository name must be 2 characters long and no more. (The value you config in OAC0.) This is important for a step that comes later.
Once I am sure my Content repository config is up and functioning, I modify transaction OAC3 to map the appropriate business object and Document type to the repository I created. The field here only allows 2-letter repository names, which is why your config in OAC0 must conform. This should allow you to store a document to documentum and have it link to the Purchase order record. You may also need to modify your document class via OAC2, but it sounds like you've already done that.
If instead you wish to store a copy of the purchase order output (printlist) you will need to configure that as well in OAC3. Object type SOOD and Doc Type Druckliste or GENPRLIST. Then when you print, select "Archive Only" or "Print and Archive" and specify the object type and doc type, and your output will be directed there.
Good luck.

Cannot display the folder. Microsoft Outlook cannot access the specified folder location.

Hi, guys
I cannot view delegate mailbox in Outlook. Following is my configure.
I have two mailbox A-User and B-User
Login Outlook as A-User, click File -> Account Settings -> Delegate Access, add B-User and give Editor permission of Inbox.
Right click A-User's root inbox and select Properties -> Permission, select B-User and check "Folder visible".
Login Outlook as B-User on other computer, click File -> Account Settings -> Account Settings, select B-User and click Change -> More Settings -> Advanced, add A-User.
Now I can see a root A-User in Navigation Pane. But when I click it, it shows
"Cannot display the folder. Microsoft Outlook cannot access the specified folder location."
or
"Cannot display the folder. Microsoft Outlook cannot access the specified folder location. The operation failed. An object cannot be found".
I searched some solutions from internet, but all of them don't work. Could you give some suggestions?
Thanks.

Hi,
First, please double check if you have given the right permission to B-User on your step 2.
In addition, we can try to give a higher permission to the B-user to check the result.
Please feel free to post back and let me know the result.
Best Regards,
Steve Fan
TechNet Community Support

I cannot send or forward email in Outlook from my iPad

I cannot send or forward email from Outlook on my iPad

Try deleting the mail account and setting it back up again.

"Outlook cannot perform search. Cannot display view." error coming up when searching shared calenders in Outlook 2010.

Hi,
So I am having issues with the advanced find feature in Outlook 2010. When I goes to search a shared calender it gives me the "Outlook cannot perform search. Cannot display view." error. It is odd because it only does it with shared calenders
and only when a calender is selected. If I search my inbox it works fine. It also works fine when I first open Outlook and perform a search without selecting any calenders. If I select on it then gives me the error. I have tried resetting the views, I ran
cleanfinders and I went through this page (http://www.msoutlook.info/question/47) and rebuilt the index/scanned the pst/etc. Nothing seems to be working. I would appreciate some help if anyone knows why this would be happening.
Thank you for your time,
Gabe M.

Pst file size would not cause this and Outlook 2010 can have huge pst files as long as you use the new Unicode format.
If the problem is a corrupt view, cleanviews will clear it. I'm sure there are other causes besides corrupt views, but I can't think of any at the moment.
Does it work in Safe mode? To open Outlook in Safe mode: Close Outlook then hold Ctrl as you click on the Outlook icon. You'll get a message asking if you want to start in Safe mode. Click Ok.
Diane Poremsky [MVP - Outlook]
Outlook & Exchange Solutions Center
Outlook Tips
Subscribe to Exchange Messaging Outlook weekly newsletter

I cannot display image (read from oracle BLOB field) on browser?

I cannot display image (read from oracle BLOB field) on browser?
Following is my code, someone can give me an advise?
content.htm:
<html>
<h1>this is a test .</h1>
<hr>
<img src="showcontent.jsp">
</html>showcontent.jsp:
<%@ page import="com.stsc.util.*" %>
<%@ include file="/html/base.jsp" %>
<%
     STDataSet data = new STDataSet();
//get blob field from database
     String sql = "SELECT NR FROM ZWTAB WHERE BZH='liqf004' AND ZJH='001'";
     //get the result from database
     ResultSet rs = data.getResult(sql,dbBase);
     if (rs!=null && rs.next()) {
          Blob myBlob = rs.getBlob("NR");
          response.setContentType("image/jpeg");//
          byte[] ba = myBlob.getBytes(1, (int)myBlob.length());
          response.getOutputStream().write(ba);
          response.getOutputStream().flush();
     // close your result set, statement
     data.close();
%>

Don't use jsp for that, use servlet. because the jsp engine will send a blank lines to outPutStream corresponding to <%@ ...> tags and other contents included in your /html/base.jsp file before sending the image. The result will not be treated as a valid image by the browser.
To test this, type directly showcontent.jsp on your browser, and view it source.
regards

Outlook 2010 pro " error "outlook cannot display this view"

Hi,
When opening my outlook, I do see my inbox + subfolders, but i do not see any mails in the right panel, and I get the error messge "outlook cannot display this view" when clicking the inbox.
Any ideas of how to get the visabilty and function back?
Thanks
~M

Pst file size would not cause this and Outlook 2010 can have huge pst files as long as you use the new Unicode format.
If the problem is a corrupt view, cleanviews will clear it. I'm sure there are other causes besides corrupt views, but I can't think of any at the moment.
Does it work in Safe mode? To open Outlook in Safe mode: Close Outlook then hold Ctrl as you click on the Outlook icon. You'll get a message asking if you want to start in Safe mode. Click Ok.
Diane Poremsky [MVP - Outlook]
Outlook & Exchange Solutions Center
Outlook Tips
Subscribe to Exchange Messaging Outlook weekly newsletter

Cannot Sync my new contacts from I phone 4s to outlook but can sync a new contact from outlook 2010 to iphone. I could earlier sync both ways

Cannot Sync my new contacts from I phone 4s to outlook but can sync a new contact from outlook 2010 to iphone.
I could earlier sync both ways
what could the problem be

If your iMac is running 10.9, with contacts and calednar, Maverick is designed to sync those through the icloud
http://support.apple.com/kb/PH12117
" If you use OS X Mavericks v.10.9 or later, your contacts, calendars, and other info are updated on your computers and iOS devices via iCloud."

Cannot display more than 16 significant digit numbers from Oracle

The WebI Report cannot display more than 16 significant digit numbers from an Oracle data type field.
This occurs for both an ODBC and native driver connection to Oracle.
The data is defined by Number Data Type in Oracle, and view correctly in Universe, but display incorrectly in WebI report which created by InfoView.
I know BOE XIR2 has this behavior, but it seems that XI3.0 and XI3.1 also have this problem.
If this behavior in XI3.0 and XI3.1 perform by design? or it's a bug? and Why?
Thanks!

Hi Sarah,
Precision limitation of a Web Intelligence filter constant :
In an Oracle database, a Number field type can store up to 38 digits. When creating a Web Intelligence report in the Java Panel, a condition is specified for this field (that is represented in the universe as a number), and a constant number is entered for its value, only up to 15 digits of precision are retained.
For example, if 1234567890123456789 is entered, the value becomes 1234567890123460000.
Or, if you have a column in database which has a number like 123.123456789012345678 it will display only 123.123456789012.
Cause
The reason for this limitation is that Java Panel represents a number internally as a Double field type with only 15 digits precision. This is by design.
Resolution
The only workaround is to change the field type to a Character field; however, doing so means losing the ability to perform calculations and/or sorting on the field.
This issue has been raised as an Enhancement Request and given Track ID # ADAPT00908702.
Regards,
Deepti Bajpai

Browser cannot display E3200 router web page from ethernet connection but can from wireless

I have installed my E3200 downstream from the Verizon FiOS Actiontec (going the other way disables FiOS functions).
1. My browser can get to the E3200 (192.168.1.2) when connected via wireless, but not when connected via ethernet cable.
     How do I fix that?
2. When going to connect wirelessly, the 2GHz connection is visible but the 5 GHz connection is not
     (I have them named differently).
     How do I see both wireless connections?

My browser cannot get to my E3200 setup web page from a wired Ethernet connection (wireless works fine).
The Linksys E3200 (1Gb ethernet, “n” wireless) is installed downstream from a Verizon FiOS Actiontec router (10/100 ethernet, “g” wireless).
I cannot put the E3200 upstream from the Verizon router because I would lose FiOS TV capabilities.
The E3200’s fixed IP address is 192.168.1.2 (the Verizon router is 192.168.1.1)
I cannot change the subnet (e.g. to 192.168.2.x)
Clearing the browser cache and rebooting both routers doesn’t help.
Both computers tested have dual band “n” network adapters.
So... wireless connection works fine, but I cannot get to the setup page via wired ethernet.
Help?

ACE 4710 - Internet Explorer cannot display the webpage randomly

We have a ACE 4710 with a basic config, (see below).
When clicking on a tab from a window within Interent explorer we occasionally get an issue with it returning: "Internet Explorer cannot display the webpage" The details show "Access is denied" accessing a particular line of a javascript file.
We have put one web server out of service in the farm to make sure that this isn't a result of stickyness not quite working.
We have tested extensively by going directly to the web server directly without the load balancer and cannot reproduce the problem but we can produce the issue within a few minutes when going to the load balanced address.
Thanks in advance for any advice.
HOST-1/Admin# show run
Generating configuration....
logging enable
logging fastpath
logging standby
logging timestamp
logging trap 6
logging history 6
resource-class SLB_ResourceClass_T_R
limit-resource all minimum 10.00 maximum unlimited
resource-class sticky
limit-resource all minimum 10.00 maximum unlimited
boot system image:c4710ace-t1k9-mz.A5_1_2.bin
peer hostname HOST-2
hostname HOST-1
interface gigabitEthernet 1/1
switchport access vlan 1000
no shutdown
interface gigabitEthernet 1/2
shutdown
interface gigabitEthernet 1/3
description LB003
switchport access vlan 1
shutdown
interface gigabitEthernet 1/4
description LB004
switchport access vlan 2
shutdown
interface port-channel 1
port-channel load-balance src-dst-port
no shutdown
clock timezone standard GMT
switch-mode
context Admin
description SUTLB01
member SLB_ResourceClass_T_R
access-list ALL line 8 extended permit ip any any
access-list ALL line 16 extended permit icmp any any
access-list everyone line 8 extended permit ip any any
access-list everyone line 16 extended permit icmp any any
probe tcp probe_tcp_80
port 80
rserver host Server_S_W301
description Server_S_W301
ip address x.x.32.152
inservice
rserver host Server_S_W302
description Server_S_W302
ip address x.x.32.154
inservice
serverfarm host sfarm_T_R
description sfarm_T_R
predictor leastconns
probe probe_tcp_80
rserver Server_S_W301 80
rserver Server_S_W302 80
    inservice
sticky http-cookie Cookie1 T_R_sticky_cookie
cookie insert browser-expire
timeout 3600
serverfarm sfarm_T_R
class-map match-any T_R_L4Class
2 match virtual-address x.x.33.150 tcp eq www
class-map type management match-any remote_access
2 match protocol xml-https any
3 match protocol icmp any
4 match protocol telnet any
5 match protocol ssh any
6 match protocol http any
7 match protocol https any
8 match protocol snmp any
policy-map type management first-match remote_mgmt_allow_policy
class remote_access
    permit
policy-map type loadbalance first-match T_R_L7policy
class class-default
    sticky-serverfarm T_R_sticky_cookie
policy-map multi-match T_R_L4Policy
class T_R_L4Class
    loadbalance vip inservice
    loadbalance policy T_R_L7policy
    loadbalance vip icmp-reply active
    nat dynamic 2 vlan 1000
interface vlan 1000
ip address x.x.33.148 255.255.254.0
access-group input ALL
nat-pool 2 x.x.33.151 x.x.33.151 netmask 255.255.254.0 pat
service-policy input remote_mgmt_allow_policy
service-policy input T_R_L4Policy
no shutdown
ip route 0.0.0.0 0.0.0.0 x.x.32.1
ssh key rsa 1024 force

+------------------------------------------+
+-------------- HTTP statistics -----------+
+------------------------------------------+
LB parse result msgs sent : 421347     , TCP data msgs sent       : 2099597
Inspect parse result msgs : 0          , SSL data msgs sent       : 0
                      sent
TCP fin msgs sent         : 6169       , TCP rst msgs sent:       : 769
Bounced fin msgs sent     : 5          , Bounced rst msgs sent:   : 1
SSL fin msgs sent         : 0          , SSL rst msgs sent:       : 0
Drain msgs sent           : 337811     , Particles read           : 5040829
Reuse msgs sent           : 0          , HTTP requests            : 342499
Reproxied requests        : 183422     , Headers removed          : 37475
Headers inserted          : 342124     , HTTP redirects           : 0
HTTP chunks               : 224859     , Pipelined requests       : 71466
HTTP unproxy conns        : 267246     , Pipeline flushes         : 0
Whitespace appends        : 0          , Second pass parsing      : 0
Response entries recycled : 71302      , Analysis errors          : 0
Header insert errors      : 22         , Max parselen errors      : 215
Static parse errors       : 99         , Resource errors          : 0
Invalid path errors       : 0          , Bad HTTP version errors : 0
Headers rewritten         : 0          , Header rewrite errors    : 0
SSL headers inserted      : 0          , SSL header insert errors : 0
SSL spoof headers deleted : 0         , Unproxy msgs sent         : 267246
HTTP passthrough stat     : 0
NOTE - We did turn on caching at one point to try and resolve the issue but it has since been turned off

Error: Cannot display file. The file contains 0 bytes

Hi,
I am getting the below error when accessing a a document using Autovue from Documentum:
"Error: Cannot display file. The file contains 0 bytes"
Please note, autovue server is up and running and I get the below when accessing: http://WebserverName:7002/VueServlet/servlet/VueServlet
Oracle AutoVue
VueServlet for AutoVue 20.2.2 Build: 8633 (2013-08-21)
Servlet tunneling to server[0] (IP=xxx.xxx.xxx.xxx)
Connection state: OK
AutoVue server is up and running.
Build: 8633 (2013-08-21)
Server Load:
Server: farm-server[0] (xxx.xxx.xxx.xxx:xxx) Processors: 2
I hope to hear from someone soon!
Cheers

That means that you documentum integration is not working properly
you will need to debug the integration you are using and attach logs for the server, integration servlet (VueLink for documentum, which version?)
Please review the KB, there are items associated with it
Oracle AutoVue VueLink for Documentum Troubleshooting Center(Doc ID 1348153.1)

Cannot Display MSG (MS Outlook) from Documentum in SAP

Similar Messages

Maybe you are looking for