Cannot download drivers for my network adapter - Gigabyte X58A-UD5 Motherboard

Hey everyone, I recently got tired of my wireless connection for obvious reasons and decided to run an ethernet cable from my modem to my computer. I once I plugged in the ethernet cable nothing happened; I was confused and checked my network adapters
and my Lan adapter isn't there, no problem I'll just go download the drivers for it. I downloaded DriverTuner from the gigabyte site, and ran it found I didn't have drivers for an "Ethernet Controller" or a "Standard Duel Channel PCI IDE Controller".
So I download and attempt to install the drivers and get the error message "You have to run the 64-bit version of DPInst.exe on this machine - Contact vendor". (That's my problem and question - sorry for the story thought it might help.)
I've tired all number of ways to fix this, including attempts at running DPSisnt.exe, which I have no idea how to run any help would be appreciated, and am I even on the right track? is there something simpler going on?
Thanks :)
Connor

did you try this one?
http://download.gigabyte.us/FileList/Driver/motherboard_driver_lan_realtek_8111_w7.exe
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Similar Messages

  • Cannot download drivers for the HP office jet 4635

    I cannot find and download drivers for my MAC.  On verious support pages for downloading drivers, I enter the procuct name "HP officejet 4635" and enter and only blank pages come up and I cannot continue.  It's a new printer and I am about to return it and buy another brand.
    I was able to install it for my Windows machine, but most of the use will be on the MAC.

    Hi,
    Download and install the software below:
    http://ftp.hp.com/pub/softlib/software12/COL49513/mp-120051-4/HP-Officejet-4630-series_v12.30.0.dmg
    Be sure to select HP Scan while installing to get full functionality.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Cannot download drivers for Bootcamp

    Hello
    i want to install Windows 7 on my new Macbook Pro '12 10.8 as i open the boot camp assitant and try to download the drivers for windows the stauts bar stucks at about 33% and nothing happend. On my old Macbook with 10.6 the assistant says that there is no software avaible at the moment
    Can i download the drivers anyewhere else?
    Is there a sever problem on apple´s site?
    Regards

    Try downloading the drivers from here. http://support.apple.com/kb/DL1638

  • Cannot Downloading Drivers for Windows XP

    Hi
    I am a working on a friends laptop. I am completing a fresh install of Win XP, however when trying to download drivers I jst get page errors in both Firefox & IE 7. Is the website currently experiencing problems???
    Holla back
    Cheerz
    fleamourian

    HI guys (especially mm1977 & mdz)
    *@mm1977:*
    The Satellite A200-14E belongs to the PSAEC series.
    Everything can be found on the Toshiba Euroeapn driver page!
    *@ mdz:*
    I was able to download all drivers and the site runs!! I dont know what you problem is but I recommend checking you notebook settings.
    For driver download use the Toshiba European support page:
    http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=Support_Homepage _eu
    To admin: case closed

  • HT1461 I have installed the Windows 8 on my MacBook using BootCamp, but I cannot install drivers for Windows now

    I have installed the Windows 8 on my MacBook using BootCamp already, but I cannot install drivers for Windows now: I've got only BootCamp 3 disk and it doesn't goo even if I start it using compatibility options. And my BootCamp on Mac didn't offer me to burn cd with drivers for windows as I saw in many instructions. How can I resolve the problem? Thanks a lot.

    Go back to Boot Camp: on the 2nd page you get this:
    Download the support software and as Windows is already installed uncheck the 2nd box.

  • Can anyone tell why I cannot install drivers for my IPOD Clasic

    I have iTunes installed and I cannot install drivers for my IPOD Classic while using windows vista 64 bit?

    Download the apps on your syncing computer and then sync to the iPod. Note that you can only sync apps for the one syncing computer you use with the iPod. You can manage music and videos among different computer.

  • Cannot download ios5 due to network connection timing out

    cannot download ios5 due to network connection timing out

    For me, I tried clicking around the iTunes stall to maintain a network connection.  Worked for mr.

  • 15k after patches: Cannot assemble drivers for root /pci@1c,700000/scsi@1/d

    All domains booted fine before patching through my local patch proxy on Thursday, June 15th. After running smpatch update, all domains went into the reboot loop with:
    Cannot assemble drivers for root /pci@1c,700000/scsi@1/disk@0,0:b
    Jun 15 20:42:57 2006 Cannot mount root on /pci@1c,700000/scsi@1/disk@0,0:b fstype ufs
    I've reviewed other posts with similar error but there shouldn't be a driver completely missing, as it did boot fine many times before patching. From google search it looked as if /kernel/drv/sd.conf might have been effected by a patch, but that doesn't seem to be the case as a search through all /var/sadm/patch doesn't show any files with that string. Perhaps the scsi drivers were changed somehow?
    If this is a patch, I would really like to narrow down which one it might be so I don't need to un-install all of them.
    t

    Thanks for the responses, I really do appreciate the help.
    My goal was to install Solaris 8 onto 2 systems, a V880 and a V890.
    Initially my problem was that I tried to install our existing Solaris 8 07/03 flash archive onto the V880 (and V890). But the V880 and V890 needed newer hardware links, I had to re-create our Solaris 8 flash archive with the 02/04 release of Solaris 8.
    Now the V880 and V890 would boot from the network and the OS would install onto the local drives. But when the OS would boot from the local disk, I would received the error "Cannot assemble drivers for root /pci@8,600000/SUNW,qlc@2/fp@0,0/disk@w500000e01
    1476eb1,0:a". The machine would panic and cycle - booting and panincing over and over again.
    Since the net boot image recognized the disks but the flash archive installed image did not, I booted the V880 with "boot net -s" to view the loaded modules. I compared a V240 running Solaris 8 with the net booted V880 as I have no other V880s in the environment. I also compared the directories /kernel/drv/sparcv9/ to see which drivers were missing.
    What I discovered is that since I create our flash archive on a scsi based system and I did not use the SUNWCXall package cluster in the profile, the drivers for the FC-AL drives do not get included on the system from which the flash archive is created. The V880 and V890 internal drives are FC-AL based. This was the root cause of my problem.
    Thru the comparison described above, I learned that I needed to add the following packages to the install profile of the master system:
    socal driver - SUNWluxl and SUNWluxlx
    qlc driver - SUNWqlc and SUNWqlcx
    usoc driver - SUNWusoc and SUNWusocx
    Then I recreated the flash archive and re-jumped the V880 and V890. Both systems booted from their internal drives. And there was much rejoicing...

  • I run os x 10.4.11 and cannot download itunes for my ipad?  what OS do i need?

    i run os x 10.4.11 and cannot download itunes for my ipad?  what OS do i need?

    Which exact model iPad? It would almost certainly state system requirements on the packaging.
    From http://www.apple.com/ipad/specs/ the current model requires at least 10.5.8

  • Solaris 10 won't boot up "Cannot load drivers for /pci@400.....

    This is the error message that I am getting on a Solaris 10 sparc server
    scsi: no major number
    cannot load drivers for /pci@400.....
    Can't load the root filesystem
    Type 'go' to resume
    {0} ok
    Is there a way for me to correct this issue. It looks like I am missing a scsi driver to boot up the server? Is there a way to boot into single user mode, mount the filesystem and rediscover the hardware, etc.....

    First i guess you have to verify that you can find the disks with a probe-scsi-all
    next you can boot it of a CD-rom/dvd into single-user:
    boot cdrom -s
    .. or similar into single-user from a jumpstart image:
    boot net -s
    Then you can mount the root disk under something such as:
    /mnt
    and rebuild the config with:
    devfsadm -R /mnt
    be careful if you have a mirrored filesystem though, you don't want to update just one of the mirrors without first breaking the mirror..
    .7/M.

  • Download drivers for another pc, but firefox will only install them

    I am trying to download drivers for a new (used) pc I obtained. When I try to download the proper driver, The only option available to me is to install. There is no question of do I want to save, only to install. Is there a setting to overcome this?

    Hi bussoboy,
    Adding to sarbin's instructions, you should probably run the Windows 7 Upgrade Advisor from MS .  That will show you what is compatible and what is not.
    Dave
    T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    If someone helped you today, pay it forward. Help Someone Else!
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Need to download drivers for canon MP 280 for macbook pro

    I need to download drivers for canon MP 280 for macbook pro how do i go ...

    Welcome to Apple Support Communities
    As you can see, that printer is compatible > http://support.apple.com/kb/ht3669
    To get the drivers for that printer, you just have to add the printer to OS X, following these steps > http://support.apple.com/kb/PH11145 OS X will download automatically the driver for your printer after adding it to the printer list. Or you can download the Canon drivers from the Apple website > http://support.apple.com/kb/DL899
    You don't need to get drivers from the Canon website. The Apple drivers are sufficient to make the printer work, although you may find software in the Canon website that you may want

  • Download drivers for LENOVO G460

    Hi!
    I need download drivers for win 7 x64 but in link to files is wrong response (sorry but my english is bad) (server response code is LOOPBACK)...
    Some help?
    Solved!
    Go to Solution.

    it's possible that lenovo has dns issue. you can try it later or/and you can use download manager.
    http://download.cnet.com/internet-download-manager/3000-2071_4-10071618.html

  • Where do I download drivers for airport extreme.....my iPad can not be set up by he current software

    where do I download drivers for airport extreme.....my iPad can not be set up by he current software

    I have an airport extreme with updated software(latest) and I setup an Ipad 3 on it with ios6(wirelessly). You can access the airport to update it with the utitlity app on an ios device, mac, or pc. I dont think it has anything to do with the airport software. Did you try rebooting the airport, then trying again?
    Like james said, maybe more detail would help someone help you.

  • How could i download drivers for imac mc814 for windows 7 ? and from where ?

    how could i download drivers for imac mc814 for windows 7 ? and from where ?

    If you are trying to run MS Windows in Boot Camp then please post in the correct forum, the Boot Camp forum. That is where the Windows guys hang out.

Maybe you are looking for

  • IPod touch 2nd gen and newest version of iTunes?

    I updated my version of iTunes to 10.7.0.21, and my iPhone 4S to iOS 6. I also have a beloved and still-functional iPod Touch 2d gen, which is no longer supported. Even so, will I still be able to sync with/backup to, iTunes? Just wondering...

  • Problem in calling XI generated Web Service via Java Web Dynpro

    Hi experts, I have problems with calling a web service, which was created by XI. I have already tested the web service with Altova XMLSpy. The Web Service works fine. But when embedding this web service into Java Web dynpro application no message flo

  • Restore from rman - kindly help

    Hi, I'm new with RMAN and need some help from experts here. my database is in archivelog. version: 10.2.0.3 rman with recovery catalog. I have backup my database (online) using rman by executing the following: RMAN> run allocate channel c1 type disk1

  • Big issue : can't sign in to my ovi email account...

    Hi everybody need urgently support, please ! Tried to sign into my ovi email account but always getting following error message : We're sorry, we cannot process your request at this time. Please try again later. (Error: ERR_AUTH_AC_DAMAGED)Please ent

  • Tempo service hangs every time I start laptop

    Hi I have a Satellite L350 - 17P and every day it starts up it locks up. It works for about a minute then freezes. On starting it up the 2nd time it works perfectly. Any one have any ideas how to stop this pc doing this? It's a few years old now and