Cannot edit page
I have a problem editing one page on my site. When I was
publishing it the server connection was lost. Now no one can edit
the page. There is no *.lck file nor do any users have a draft of
the page. Contribute is not providing any error message; clicking
the edit button does nothing.
Has anyone else encountered this problem? I am using
Contribute CS3 and CPS with 60 users.
Any help would be greatly appreciated. I found nothing to
address this problem within HELP.
Fred
I am having a similar issue with one of my publishers. She was editing a page and went to publish it but the publish button was greyed out (even though she is a publisher). So she sent the draft to herself for review and was able to publish it that way. After that neither of us could edit the page because it said that someone had a draft of it and was reviewing it. So I went onto our server and deleted the .lck file. Now I can go in and edit it (I am an administrator). However, when she clicks the "Edit Page" button nothing happens. Contribute just sits there. This is the only page my publisher is having an issue with.
Similar Messages
-
Hello All,
I'm new to DW so please keep that in mind. I have a site
that I need to tweak and have been able to edit most pages in that
site. However there are a group of pages that I cannot edit in any
mode.(Design or Code) Each of these pages displays in yellow at the
top right of the window "Template:internal" I'm not sure what that
means. I have looked at much of the code but have found no obvious
differences between the pages I can edit and those that I cannot.
Could someone help me understand what is going on here?
Thanks, Jeff> Is DW as bad as FP?
Without a comfort level in HTML and CSS, anything will be
trouble for you.
On the other hand, if you are not put off by looking at code,
then DW's
templates are quite simple to understand and adapt to.
> The site is quite large and has a few sub webs.
DW will not play well with sub webs. Each sub web must be
treated as an
independent site in DW with its own site definition and local
site (although
you could nest your local sites in DW).
> Anyway, I guess I test on a local server and hope to get
an understanding
> of
> DW.
Does your site's usage require a testing server? By that, I
mean to ask -
are you using server scripting? If not, then you do not need
a testing
server.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"jeff5100" <[email protected]> wrote in
message
news:gbari5$bhb$[email protected]..
> Thanks ACE,
>
> There was indeed a Template folder with the template
file in
> it.
> I have downloaded it and will attempt to discover how to
use it. It
> reminds me
> of Front Page which is a nightmare to go behind. Is DW
as bad as FP? I am
> fairly comfortable with html and have a conceptual
understanding of css. I
> have
> built a site or two from scatch with DW without any
problems. My main
> concern
> is that this site has been built by many entities and
using different code
> applications. I have to fix a few cosmetic things but
don't want to break
> the
> site with my minor changes. The site is quite large and
has a few sub
> webs.
> Anyway, I guess I test on a local server and hope to get
an understanding
> of
> DW.
>
> Thanks again for your help
> -
Usernames with underscore at the begining cannot edit pages
Hello,
I know that a username (short name) starting with an underscore “_” are reserved by the system accounts.
Anyways I wanted a character to differentiate users by their name and didn’t wanted to use the hyphen.
So with such users, the pen button is never available. You cannot edit their pages.
The fix is to not name your users using a underscore at the begining.
I wouldn’t consider this as a bug but worth to know.
Message was edited by: Thyb
Message was edited by: Thyb> Is DW as bad as FP?
Without a comfort level in HTML and CSS, anything will be
trouble for you.
On the other hand, if you are not put off by looking at code,
then DW's
templates are quite simple to understand and adapt to.
> The site is quite large and has a few sub webs.
DW will not play well with sub webs. Each sub web must be
treated as an
independent site in DW with its own site definition and local
site (although
you could nest your local sites in DW).
> Anyway, I guess I test on a local server and hope to get
an understanding
> of
> DW.
Does your site's usage require a testing server? By that, I
mean to ask -
are you using server scripting? If not, then you do not need
a testing
server.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"jeff5100" <[email protected]> wrote in
message
news:gbari5$bhb$[email protected]..
> Thanks ACE,
>
> There was indeed a Template folder with the template
file in
> it.
> I have downloaded it and will attempt to discover how to
use it. It
> reminds me
> of Front Page which is a nightmare to go behind. Is DW
as bad as FP? I am
> fairly comfortable with html and have a conceptual
understanding of css. I
> have
> built a site or two from scatch with DW without any
problems. My main
> concern
> is that this site has been built by many entities and
using different code
> applications. I have to fix a few cosmetic things but
don't want to break
> the
> site with my minor changes. The site is quite large and
has a few sub
> webs.
> Anyway, I guess I test on a local server and hope to get
an understanding
> of
> DW.
>
> Thanks again for your help
> -
Contribute CS5 - cannot edit pages
I have just installed trial (full) verstion of Contribute and I connected, can navigate between pages etc without any problem in view mode.
However when I click the edit button it says (after trying to download the page and set up some files to work in): "Contribe encountered a network or file system error. Please try the operation again and contact the administrator if the error continues to occur." and does not create an editing page. If I do it again it creates an editing page but it is only the template and no text (apart from what exists in the template). If I add some text and publish it, it adds the text to the page I was editing adding it to the text already there (but which was not viewable in the edit page).
Any ideas why this is happening? I have never used this programme before. My provider has no idea why this is happening and is not familar with Contribute. Any help to resolve this would be appreciated. Thanks.Please clear the preferences and try.
Delete the Preferences in Library –
Go to “<username>/Library/Preferences/” and delete the folder “Adobe Contribute CS5”
Delete the Preferences in locale -
Go to “<username>/Library/Application Support/Adobe/” and delete the folder “Contribute 6”
If the above doesnot help then check if there any other versions of Contribute on the same machine and clear them also along with CS5 and try again.
Check publishing a plain page from Contribute and reediting the same.
Can you try editing any other page with a different template ?
Could you try the same on any other machine and check?
Can you share the URL ? -
Your role no longer valid error message and cannot edit page
Unfortunately I don't have access to the file, am asking on
behalf of a
friend who is skittish about his skills navigating a forum.
His question is:
When I open contribute, and select the website I want to
edit..there is a
yellow bar across the top of the screen that says "your role
in this website
is no longer valid. Click connect to update your connection
with a valid
one" so when I click connect, it goes through some screens,
then it asks
what folder on the ftp server the website is in? before there
was this
problem, I could get into the page I wanted to edit, and make
the changes,
then when I would hit the publish button the old page would
show up..so I
could make the changes but they weren't publishing..but at
that point I was
getting no error message???
He's having those two problems.
Any thoughts? I don't know diddly about Contribute. Thanks.
LibbiHi, This is because SSRS requires a Login to connect to the datasource to process the report when subscription will be occuring at its scheduled time. I would recommend you to store the credential securily into report server.
GoTo: Report>Properties> Click on the Data Sources tab and you will see following options:
a)A shared data source
b)A custom data source
Use option b) and click on option Credentials stored securely in the report server
and provide credential information and further you can use options: Windows credentials and Impersonate the authenticated User if you require. Click on apply button.
*You can use any option of them provided in first option(a) also using the shared data source which is having credential saved into report server.
Once you have done with above you will be able to create subscription.
Cheers Sunil Gure -
Hi All,
We are using SharePoint Designer 2007.When we try to open any page in designer we get following error,
"The Server could not complete your request. Contact your Internet Service Provider or Web server administrator to make sure that the server has the FrontPage Server Extensions or SharePoint Services installed"
If I click on Details button then I get the following message
"Object moved. Object moved to here."
Anyone experienced anything like this before?
Also when I try to edit sites when browsing on IE and than clicking on "Page" and "Edit in SPD2007" it's always
opening login.aspx site in SPD and that is the only one I can edit.
Kindly, please help me on this issue.Hello,
I have found one link for same issue, you might want to try it out:
http://voices.yahoo.com/sharepoint-designer-error-server-could-not-complete-7419812.html
Have you modified the custom provider in config file? Also see this link if this is the case for your second issue:
http://support.sharepointsolutions.com/entries/131560-Role-Manager-feature-has-not-been-enabled
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help -
I am using One Drive for business on my ipad. When I tryo to edit a word document in Word Online I receive the following message ...
Cannot Open Page Safari cannot open the page because the address is invalid. How do I correct?You could also ask here:
http://answers.microsoft.com/en-us/onedrive/forum -
Cannot edit any pages - No Edit Page Button
I have a blog through blogger, with my own domain, standupsteals.com. I have added a connection to it in CS5, but I have been unable to edit retrieved posts. The "Edit Pages" button doesn't even appear. I haven't tried to uninstall/reinstall yet. I did delete the connection, and recreate it, but still same problem. I cannot administer websites; it's grayed out, along with a lot of other options. I am the only user, so I shouldn't be locked out...Any ideas?
I have tried to follow the simple directions...Go to my homepage; choose an entry. Once I choose an entry, Edit Pages button should appear, right? It's not happening for me...I get a quick message that says I am on a site I am not connected to. How can that be?
When I try to edit a page from within IE, I get an error "Cannot find the file on the server" Message was edited by: ladeebishopHello Alpesh,
Thank you for replying!
I had already tried to export the roles and replaced the Z: with Z_ before creating this message, but the upload attempts failed due to the explanation above. But this time, I followed your (good) advice to delete the original Z: roles first, before uploading the corrected file.
Sadly, even after I deleted the original Z: roles prior to uploading the corrected file, I am still having no luck ... when I uploaded the file, again it (falsely) reports that the import was successful:
Import Status: 133 successfully imported out of 133 records found
After seeing that message, I quickly checked the roles, and none of the roles had uploaded. So now I have ZERO roles.
Any further ideas? I am thinking it may be something very small that is being overlooked ... perhaps certain buttons must be selected/not selected on the import screen? Or could it be an issue with the file itself?
When I do the import, I only select the button for "From File ..." and retrieve the file from my desktop via the Browse button. I do not select any other button, nor do I make a selection from the System or Role Source boxes. I have just selected that one button only ... I've tried it with and without checking the "Overwrite Existing Roles" box, but neither one works.
The part that bugs me the most is that I receive what I perceive to be an inaccurate/bogus "successful" status each time I attempt the upload of the file. At least if I had an error message, I might have something to work with to troubleshoot this. -
ERROR: cannot edit or duplicate page. Reason: no editable regions
Hi,
Going round in circles with this one. Feeling like Friday afternoon.
URL: http://www.business-risc.com/fleet/bss/1/index.html
CtrlE works fine.
Click on "POLICIES" spry tab
Click on EDIT PAGE
Highlights the correct editable region... hover confirms its an editable region.
Allows me to edit, no problem.
Then, on SAVE DRAFT or DONE returns ERROR: cannot edit or duplicate page. Reason: page does not contain any editable regions.
I just cant see why. Can anyone help please?
Thanks
CarolThere should be a space before the ice:editable attributes (all of them):
class="TabbedPanelsContent"ice:editable="*"
Regards,
Dan Popa -
Cannot create new page nor website and worse cannot edit existing websites
When I click on File in the menu the only options that work are Setup Google AdSense and Page Setup...
All other options are grey and cannot be accessed. This means that I cannot edit my existing websites which is a major problem.
Any idea? Reinstalling iWeb did not help.sharked wrote:
Do you have any more thoughts on this?
"A lot of problems can be solved simply by..." Read more in the “Fix iWeb” section here:
http://www.iwebformusicians.com/WebMusic/iWebTips.html -
I have opened scanned pages in to acrobat X1 pro and cannot edit, it says its not editable text how do I scan it as an editable text
All scanners output one thing only -- an image, a picture of the stuff on the paper that was scanned.
There is not "text". There is a picture of text characters.
This image / picture can be brought into a PDF. What is in the PDF is still an image / picture of text.
Open the PDF with Acrobat. Use Acrobat's OCR feature.
If you desire to touchup some characters use the "ClearScan" OCR.
(Review Acrobat's Help to resolve any questions on this.)
Note that PDF is not a word processor file format and does not tolerate word processor like "editing".
Use Acrobat to do touchups to characters and short character strings. Save As often.
Be well... -
Pages in iCloud cannot edit a converted MS Word to Pages file
For our monitoring program we use some MS Word documents converted to Pages. Using the local Pages app these converted to Pages file works perfectly on our Mac. Life is good.
What we cannot do is edit with the Safari iCloud Pages. It appears these forms were created using MS Word Tables. Yes it opens, but the body of the form is a table, wherein the entire table border is highlighted in blue thus we cannot edit the table as we can using the local Pages.
Other than recreating this and other forms is there something we can do? We want others to be able to fill in these forms from within iCloud Pages in their browser.
MBP, Mavericks.
Cordially,
RicDThe following is from an older post:
You can do this from icloud.com (using a web browser on a Mac or PC). iCloud.com will give you the choice to download a Pages document as a Pages, PDF or Word document.
Please read Apple's Support document titled iCloud: Get documents stored on icloud.com.
HOWEVER, while I can download a word file on icloud as a word file, one of my Pages files can only come back as a Pages file. Perhaps the advice above is no longer appropriate given the changes on iCloud. -
Edit Page options in ribbon disabled after applying modified Seattle Master Page
Hi,
I'm working on a modified version of the Seattle.master page, and I have an odd permissions issue that is seen when my user (a farm admin) tries to edit a page on the site. On some pages, clicking Edit Page doesn't do anything at all. On others, I've been
able to go into edit mode but not do anything with the Edit options afterward. In this scenario, most or all of the useful edit options are disabled, and I cannot use Save, Checkout, Discard the Checkout, Change the Page Layout, etc...
Checking the JavaScript console in IE reveals this JS error that I don't see in the OOTB Seattle:
SCRIPT5007: Unable to set value of the property 'href': object is null or undefined
[our.site.com], line 1128 character 590
Here's the function being referenced:
function _cUpdconetidProjectPropertyTitleGraphic(data, ctrl){ ctrl.href = slNavUrl; }
Other possibly helpful information:
Here is a snippet from the modified Seattle Master Page of where the ribbon code sits:
<div id="s4-workspace" class="ms-core-overlay">
<div id="s4-bodyContainer">
<SharePoint:SPSecurityTrimmedControl runat="server" AuthenticationRestrictions="AnonymousUsersOnly">
<wssucw:Welcome runat="server" EnableViewState="false" />
</SharePoint:SPSecurityTrimmedControl>
<div id="ms-designer-ribbon">
<PublishingRibbon:PublishingRibbon runat="server"/>
</div>
As you can see, I have moved the Ribbon (div#ms-designer-ribbon) from its fixed position outside of the div#s4-workspace to inside of the div#s4-bodyContainer so that it scrolls with the page. Placing the ribbon inside div#s4-bodyContainer shouldn't be an issue,
as I've made a Design Manager Master Page in the past and placed the ribbon there as well without issue.
Does anyone know how I can get this modified Seattle master page to allow editing?Hi,
Is there any custom JavaScript in it, sometimes error may occur due to some typo.
Suppose that we can do the customization like this: With a copied master page, we can apply a part of the change first, then check it in the browser to make sure it can work without affecting the OOTB features. Then apply other parts one by one with immediate
examinations...
By doing this, it would be easier to find out which step in your whole customization would cause the issue.
Best regards
Patrick Liang
TechNet Community Support -
Business Data List View ONLY Displays records - Cannot Edit them
Using SharePoint 2010, I created an External Content Type. Data is coming from SQL Server. I created a new Read operation on my External Content type. I added a few filters in this Read View.
I have created a web part page in which I placed a Business Data List Web Part. In Web Part properties I chose the VIEW in question. I can now filter my External List data and the Business Data List Web Part displays them. But I cannot edit these
records!!!
From the web Part properties window, I can ONLY choose Views that are created from READ operations. How do I allow users to edit data and save data in the original source (SQL Server).
MayankBelow are the reference links on how to CRUD operations on external data using BCS
CRUD operations using BCS using SharePoint designer
http://zimmergren.net/technical/sp-2010-getting-started-with-business-connectivity-services-bcs-in-sharepoint-2010
CRUD operations using BCS using Visual studio
http://www.c-sharpcorner.com/uploadfile/anavijai/creating-external-content-type-with-crud-operations-using-business-data-connectivity-model-in-sharep/
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful -
I have the iPad basic first edition. For some reason my app store app is missing. On my games when I tried to update the apps I get a message that says safari cannot open page because address is invalid, but this happens even when I click directly on the prompt message that comes up when loading game. Also, it seems that my app store app has been deleted? I don't know how to get it back. When I try to download it I get the same safari message as afore mentioned.
Swipe to seethe farthest home screen to the left. Type in App Store in the search box and see if the app may have been accidentally placed into a folder with another app.
You cannot download apps using Safari.
Maybe you are looking for
-
Strange gaps in Header and Footer
Im getting gaps in the header and footer on some of my pages. Sometimes the gaps are filled with the background color of the colomn and other times they are the body color which is even weirder. An example link would be http://www.mojogar.com/pcRep
-
Should be Oracle database bin path in PATH BEFORE Soa Suite bin path ?
On my local computer I installed Oracle Database 10g Express AND Soa Suite. Hence the PATH environment variable contains (among others) two pathes: one for Soa Suite and one for database 10g.e.g.: Path=D:\soa\v10.1.3.1\OracleAS_1\jdk\bin;D:\soa\v10.1
-
Dear All, I am very much interested to learn HANA. But my background is ABAP +SD. Please advise how much it is suitable to learn HANA. Regards, Vishnu.
-
Adding a field in the VF31 Output list
Dear Experts We have a requirement such that in the VF31 Output screen which will list the billing document no and the output types, we should add a new column in the output list. This new column will have the sales group key. Considering that sales
-
I am attempting to build out the Agent Whisper Feature in our Development lab, but I keep getting "IPIVR Whisper is disabled as the routing client CVP is not System PG" in Router Log Viewer. I followed the configuration guide for Agent Whisper, but I