Cannot find Battery Info in System Profiler

Cannot find "Battery Info" in System Profiler (4.0.4).
Originally, I was going to title this post "battery not charging" - which is why I am looking for battery details. Of course, as soon as I started typing the battery clicked up a notch (29% to 30%).
So, I got a confused battery and a confused System Profiler.
A couple of weeks ago I had drained the battery completely and had to even run off the backup battery as I quickly finished what I was doing. I had since fully charged the battery and thought there were no problems.
Then suddenly a couple of days ago, I looked up and it was stuck at 33%. When I tried to switch from "Percentage" to "Time", all I got was a "Calculating...", which it never actually did. I tried unplugging the computer, and it indeed did run off battery power, so it was at least communicating power-wise, if not information-wise. Two days of fiddling around offered no solutions. (Zapped the PRAM, reset PMU). Meanwhile the battery kept on not charging.
Then, I start typing here and suddenly the battery is communicating with the computer. Percentage is ticking up and there is even an estimated "time until full". However, System Profiler still does not see any battery, or in fact even give me anything to click on for power management. It's not under Hardware, Software, Network or Logs. "Extended Report" doesn't find it either. I'm hoping I am just missing it somehow... is "Battery Information" hidden somewhere?
The battery plug has now switched from green to orange and the indicator icon from a battery with a plug, to a battery with a lightning bolt. While I was trying to figure out the problem, I have taken out the battery several times, so I doubt it would be a simple connection issue.
While I would like to believe my computer has magically healed itself, I suspect that something is still amiss. Maybe earlier versions of System Profiler did not have Battery Info?

Hi, RW, and welcome to Apple Discussions. System Profiler prior to the version that came with Tiger doesn't report any battery info. If you're running Panther, that's why you can't find anything about your battery in SP. Jeremy Kezer's XBattery will provide info about your battery in Panther.
Test to see whether your battery charges with a different, known-good AC adapter. That's the cheapest component of the charging system to replace if yours is faulty, and with luck that will prove to be where the problem lies. Other possibilities are a bad battery, DC-In board, or logic board.

Similar Messages

  • SAPINST: CJS-20049 Cannot find an installed ABAP systems...

    Hello.
    I want to install a double stack WebAS 6.40 in order to install an XI (as of NW04) on it later on.
    The ABAP Central Instance is running proberly (DB=MSSQL). When i now try to add the Java-Instance to my system
    (path in SAPInst: SAP NetWeaver '04 Support Release 1 -> Java Add-In for ABAP -> MS SQL Server -> Dialog Instance Finalization) I receive a CJS-20049 "Cannot find an installed ABAP system".
    What´s my mistake?
    I tried it with the ABAP system up an running ans also with the ABAP system stopped.
    MIKE

    Any luck Mike? I'm getting exacltly the same error. It's very strange because I got my ABAP+Java development system installed fine. Now I'm installing the production environment and get the CJS-20049 error. I entered an OSS message (text below) but I can't wait the 3 days for a response.
    Does anyone know what command it is issuing to find a system? I have not given any parameters yet so sapinst is still running as root and doesn't know any system or user names. I am doing the Java Add-In for ABAP>>DB2 UDB for UNIX and Windows>>Java System Finalization option, which is what I used on development and which the install guide says "Installs the SCS instance, the Java part of the central instance, and the Java database schema" so I believe this is correct. The Dialog instance is done if you want other instances after installing the main java.
    Hello,
    I installed the development WAS 6.40 ABAP on host sap005 and then a Java add-in and everything went fine.
    Now I am installing the production systems. I installed the WAS 6.40 ABAP following the same steps as for development but when I now try to install the Java add-in I get the message:
    Looking for SAP system instances installed on this host...
    INFO 2005-05-21 16:40:54
    CJSlibModule::writeInfo_impl()
    No installed instances found!
    ERROR 2005-05-21 16:58:20
    CJSlibModule::writeError_impl()
    CJS-20049 <html>Cannot find an installed ABAP system, which is a prerequisite for a J2EE Add-In installation.<p>The installation cannot continue.</html>
    WARNING 2005-05-21 16:58:20 [iaxxccntrl.cpp:477]
    CController::stepExecuted()
    The step setDefaults with step key J2EE_EngineEnterprise_Addin_OneHost|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|setDefaults was executed with status ERROR.
    I would have thought that it would say “WebAS|640” but I assume that the “WebAS|630” above is correct as the media says NW04 SR1.
    I compared all the SAP directories on sap005 and sap008 and they seem to be the same.
    Any advice would be greatly appreciated.
    David Hill

  • Cannot find FF info in  ERM, CUP and RAR (GRC5.3)

    I can only find FF info on the ABAP system txn  /VIRSA/VFAT.
    But on the ERM, CUP and RAR (GRC5.3), I cannot find any info about FF.
    Which menu path/tab should I go search?
    Thanks!

    Hi Crishty,
    GRC AC contains four components RAR(CC),CUP(AE),ERM(RE) and SPM(FF).
    These seperate component have four seperate URL, so you will not get FF in ERM,CUP & RAR.
    Here are the URL to access these grc component,
    URL for RAR(CC)-
    http//<hostname>:<portnumber>/webdynpro/dispatcher/virsa/ccappcomp/ComplianceCalibrator
    URL for CUP(AE)-
    http://<hostname>:<portnumber>/AE
    URL for ERM(RE)-
    http://<hostname>:<portnumber>/RE
    URL for SPM(FF)-
    http://<hostname>:<port>/webdynpro/dispatcher/sap.com/grc~ffappcomp/Firefighter
    Thanks,
    Sudip

  • TS3694 Has anyone ever had an error code -1202? Cannot find any info on it, please help

    Has anyone ever had an error code -1202? Cannot find any info on it, please help

    Have you looked at the previous discussions on the right side of this page under the heading "More Like This"?

  • HT1311 I have been using my apple TV successfully for 1 year.  Today there was a message telling me I cannot sign in because the terms and conditions have changed.  Please go to apple support for more info.  However, I cannot find any info.  What do I do

    I have been using my apple TV successfully for 1 year.  Today there was a message telling me I cannot sign in because the terms and conditions have changed.  Please go to apple support for more info.  However, I cannot find any info.  What do I do next.

    Wow, Karan Taneja, you've just embarrassed yourself on a worldwide support forum.  Not only is your post ridiculous and completely inappropriate for a technical support forum, but it also shows your ignorance as to whom you think the audience is.  Apple is not here.  It's users, like you. 
    If you would have spent half the time actually reading the Terms of Use of this forum that YOU agreed to by signing up to post, as you did composing that usesless, inappropriate post, you (and the rest of us on this forum) would have been much better off.

  • My iPod Nano 6th generation iLive speaker system quit on me and now I cannot find a compatible speaker system.  I don't want tiny personal speakers, I use this for music in the family room.

    I have 2 iPod Nano 6th generation.  I had them setup with different music from iTunes and I had an iLive Bluetooth docking and speaker system that charged and played them with speakers spaced in the family room.  Not a little personal setup but for reasonably loud music for the whole room.  My iLive system died on me.  It had the 20 pin place to plug in the iPod nano and a clock and the two speakers that were bluetooth.  It was the perfect setup for me.  Now that model has been discontinued and I cannot find anything like it.  Does anyone know what a good option is?  These iPods are only a couple of years old and now obsolete because they don't make anything to play them on.  I don't use earbuds, it's not what I bought them for.  One has our jazz music collection, the other has Christmas music.  I want to hear it throughout the house.

    Sorry typo it had a 30 pin place to plug in the iPod Nano

  • Cannot find any info about Satellite A300-06H

    I've just bought thie Toshiba Satellite A300-06H (PSAGCC-06H019) and I cannot find anything about this computer on the Toshiba's website.
    No drivers
    No specs
    Nothing!!
    Can someone help me??
    Thanks.

    I have European notebook model and for drivers, tools, utilities and BIOS update it is important to know first part of notebook part number.
    If you have some time take a look under http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp
    The same must be for Canadian notebook models. To be honest I dont understand why they offer whole part number. Unfortunately I cannot say anything about BIOS update. Maybe is the support page not up-to-date.
    If you want to have exact info contact Toshiba Canada. They must know what is wrong there. Part number of your notebook model can be checked in Toshiba data base.

  • I cannot find battery percentages on 'Find my iPhone' app in iPhone 5 after iOS7 upgrade

    I cannot find my other iDevices' battery percentages through using 'Find my iPhone' app in iPhone 5 after iOS7 upgrade.
    Before iOS7, I used to check my devices battery percentages and charging status
    on 'Find iPhone' app. It showed battery charging or not by lightening emoticon something
    on up-right corner of their display.
    It can check only iCloud desktop website now.
    Green battery icon means 'charging now'
    Black icon means not charging.

    Hi there,
    You may find the troubleshooting steps in the article below helpful.
    iCloud: Troubleshooting Find My iPhone, iPad, iPod touch, or Mac
    http://support.apple.com/kb/TS4006
    -Griff W. 

  • Cannot find the Recv Logical system in Distribution Model

    HI experts,
    Im triying a Idoc to file scenario, the logical system for PI and R3 has been already created and assinged for the appropriate clients.
    and i ve created the port from r3 using tcode we21 and in PI using idx1 and Idx2. The RFC destination also created for PI and R3 system.. when i created the distribution model using BD64 in R2. when i assigning message type i can give the source logical system and i cant find the Receiver logical system...  Also in WE19 i cant find the receiver port (which i created in IDX1 and IDX2)..
    Could u tell me how to solve this prob???
    Regards
    Balaji

    Hii Ravi,
    Thanks for your reply,
    Yes i have created the port (RFC800) idx1 and give RFC destination which points the R3 system.
    I have assigned the meta data to that port using tcode idx2.
    And I have created port with port name "PORT800"  in R3 using we21 and give the RFC destination which points the PI system
    when im using the WE19... i gave source logical system as R3 Logical system and receiver logical system as PI Logical system.
    now im getting error like  "PORT RFC800 DOESNT EXIT IN THE THE TABLE OF PORT DISCRIPTIONS".
    Regards,
    Balaji
    Edited by: Balaji Pichaimuthu on Jul 25, 2009 9:32 AM
    Edited by: Balaji Pichaimuthu on Jul 25, 2009 9:32 AM

  • HT1692 How can I transfer my blackerry contacts to my new Iphone 5? I cannot find the info tab on my computer. When I go into Itunes I only get the music page.

    Can you please help me to transfer my blackerry contacts to my new Iphone? I have tried uploading my blackberry contacts to Blackberry desk manager and tried to connect through to Iphone using Itunes but I cannot locate where the info tab is that I need to go into to sync my contacts? When I launch Itunes I just go directly to the music page. Also I do not see my device. It does sync my device when I plug this in but I cannot actually see the device. Can someone please help as this is stressing me out. Barbara

    Welcome to Apple Discussions!
    Does this help?
    Use Your iPod To Move Songs To A New Computer
    btabz

  • Cannot find Login Screen in System- Administration

    Hi, all
    I have gdm and gnome installed and want to change my gdm login screen theme, but I can't find Login Screen setting in System->Administration. Did I forget to install some packages?
    Many thanks.

    scar wrote:
    No, since gnome 2.28 gdm doesn't have any GUI management tool ( as far as I know... )
    ( this is a bit strange to me too, since gdm is essentially a GUI being )
    see the solution in the wiki!
    http://wiki.archlinux.org/index.php/Gnome_2.28_Changes
    section 3.11
    section 4.7
    Thanks. I've seen that wiki and it seems if I want to modify gdm login screen, I have no choice but to downgrade gdm, since in Configuring gdm 2.28 section there's no workaround for modifying gdm login screen.

  • My iPhone cannot find my bluetooth audio system

    My iPhone 4s with iOS 6.1.1 can connect my bluetooth headset successfully.
    But I want to connect to my JVC ux-gn9v bluetooth audio system, it failed!
    I turn on the bluetooth and get stuck in finding bluetooth devices.
    There is no ux-gn9v show on the bluetooth list.
    But htc phone can connect to JVC ux-gn9v successfully.
    BTW, I had tried to restart my iPhone many times, it not working also.
    How to connect my JVC ux-gn9v? any suggection?
    Please advice!
    Thanks!

    Hey kennethfrommascoutah,
    Thanks for using Apple Support Communities.
    Since you are having trouble using AirPrint follow this section of the article.
    About AirPrint
    http://support.apple.com/kb/ht4356
    If you're unable to print
    Check these things if you are unable to print, or if you see the message "No AirPrint Printers Found."
    Make sure your printer has paper, and enough ink or toner installed.
    Make sure your printer is connected to the same Wi-Fi network as your iOS device.
    Make sure your printer has power and is turned on. Try turning your printer off and then back on again to see if it resolves your issue.
    Check to see if your printer has any error lights or indicators displayed on the printer's control panel. Check the documentation that came with your printer to clear any errors displayed.
    Check with your printer's manufacturer to see if any firmware updates are available for your printer. Check your printer's documentation or contact the printer vendor for more information. A firmware update may be available, even if you just bought your printer.
    Have a nice day,
    Mario

  • Cannot find operation unit in system option

    dear all,
    i am testing on legacy to AR auto invoice interface and following the step on document 1067402.1: AutoInvoice Setup for Release 12: A Case Study Using Simple Script ID.
    the first few setup was very smoothly. i hit problem on step 13. i go to setup->system -> system option. i want to go to "trans & customer" tab. but was stopped by accounting tab.
    there is no value in operating unit. i clicked on the browse button it says that the list contains no entries.
    I am using R12.1.3 on redhat 5.5 64bit.
    Thanks in advance.
    regards,
    YC

    Hi,
    Have u setup the Operating Unit and assigned it to the Responsibility using MO: Operating Unit Profile Option?
    If not please do that and then check the List of values.
    If you have done that and still facing the issue, please check whether your Security Profile is properly defined to include such OU.
    Regards,
    Sridhar

  • Cannot find iCloud in my system preferance. I do have a OS X version

    Can I use iCloud with my Mac Book OS X 10.5.8 system

    You cannot use iCloud on a Mac running 10.5.8, you will need at least 10.7.5 (Lion).

  • Imac shuts off when opening groups and users also parenting controls I've researched and cannot find directory utility or system/ app utlities does not have I'm running 10.8.5

    I have reseachered online and seen Directory Utility /System/Library/CoreService/ for helping with my System Preferences User and group /Account all will not open crashes when opened as well as Parenting Controls

    If the new user account doesn't work, try the Safe Mode.
    Safe Mode
    Safe Mode - About

Maybe you are looking for

  • HELP! New iPod Classic 80GB Recognized By Computer, Not iTunes

    I have a brand new ipod classic, and it refuses to be recognized by itunes so i can install it. The "install new hardware" wizard pops up instead and it thinks it is a USB Mass Storage Device. I've tried everything on the apple support page. PS I am

  • XI: Remove Carriage Return +Line Feed at end of XML

    Hi All, Scenario Currently, we have a JMS --> XI --> IDOC scenario. The Sender Service always sends a CRLF (Carriage Return & Line Feed+) without fail at the end of each xml file once this non-sap system finishes its transaction. Example <STARTOFXML>

  • I cant update my music library

     THEThHTHE PROBLEM IS THAT WHEN I TRY TO UPDATE MY MUSIC LIBRARY IT KEEPS UPDATING FOR HOURS SAYING 'UPDATING 0 FILES ADDED' .I THONK THAT THE PROBLEM HAS TO BE WITH THE RAM MEMORY BUT JUST HELP ME. THE OTHER THING THAT IS CURIOUS IS THAT I CANT CHOP

  • Put textpad in my dock

    how do i put it in my dock? i cant find the prog in apps folder so i drag it please tell

  • Help Install XSQL servlet on OAS 4.0.8.1

    We are having difficulties installing XSQL Servlet on our Oracle Application Server (4.0.8.1). Is there any documentation on how to complete this installation? Thanks in advance